Trying to unbrick KF7 HD with fastboot cable.. support required. - 7" Kindle Fire HD Q&A, Help & Troubleshooting

Hello,well im trying to unbrick my device.. i bricked it trying to install twrp and 2nd bootloader.. i bought the fasboot cable and now im trying to get mi kindle alive lol.. using the KFHD_SRT_v1.3.5- 7.3.0 i choose the option #1.. and this is what the tool show me. i dont know what to do after that,cause in the screen of the device is still saying "Fastboot Kindle Fire" i will appreciate your help..

Caryaz said:
Hello,well im trying to unbrick my device.. i bricked it trying to install twrp and 2nd bootloader.. i bought the fasboot cable and now im trying to get mi kindle alive lol.. using the KFHD_SRT_v1.3.5- 7.3.0 i choose the option #1.. and this is what the tool show me. i dont know what to do after that,cause in the screen of the device is still saying "Fastboot Kindle Fire" i will appreciate your help..
Click to expand...
Click to collapse
You need to reboot your device normally by unplugging the fast boot cable and holding the power button for at least 20 seconds then try turning it on (still not using the cable).
Sent from my Kindle Fire HD 7 using xda app-developers app

Thank you very much..
-a- said:
You need to reboot your device normally by unplugging the fast boot cable and holding the power button for at least 20 seconds then try turning it on (still not using the cable).
Sent from my Kindle Fire HD 7 using xda app-developers app
Click to expand...
Click to collapse
Thank you very much buddy... actually i think i was doing it in the wrong way,cause after post this thread i tried the option number 3 and it worked.. my kindle is alive again.. anyways i appreciate your help..have a good day.:good::fingers-crossed:

Related

[Q] my kindle is dead? help plz

hi all
I have a question, I have a Kindle Fire HD 7 with TWRP Recovery everything worked but the application nova launcher disappeared could not delete it or reinstall it so I did a wipe, but lost the root when you try to do it again had problems with coomand SU, with wire factory try doing a factory recovery with my backup.
appered after to restore a red screen and my computer does not recognize any new device
micro usb cable = kindle fire logo and red screen after
factory cable = fasboot logo and not recognize any device
not a problem for drivers is a problem with the tab
any ideas to fix?
tnx
Have you tried everything available to you first? This includes: factory resetting by booting into recovery and doing a whole system wipe, SD card included; see if you're at luck and ADB or fastboot still works by flashing the stock Amazon OS, assuming CMD still recognizes your fastboot.
Other than that, I'm out of options. I'd try to return it and hope for a refund or an exchange. However, you're only dealing with a soft brick, because if it's a hard brick, the whole tablet won't turn on at all, so at least it's not a paperweight at this point. I'd try to reach out to Hashcode or Soupmagnet or Reverendkjr on this forum and ask for help.
Yes, all that and tried
It sounds like your kindle updated to 7.3.0 the boot loader hack doesn't get along with that...read the last few pages in the boot loader three I think you'll fix your problem
Sent from my GT-P3110 using xda app-developers app
SAME HERE PLEASE SOMEONE HELP ME!!! DONT USE KF First Aide tool!!!
Help the same thing has happened to me i need to get in to fastboot mode but i cant
any help would be great
is their a kindle fIre hd recovery tool from amazon as i cant boot up
this was the kf first aid tool that did this to me
There's actually a way I can think of, but I don't know if it will work. As long as you can find the bootloader files for the tablet, you can try to ask someone to JTAG your KFHD7. The process involves taking apart the tablet, using electricity to provide power while re-writing the bootloader so you can end up in fastboot mode. It's not very expensive, a regular Galaxy S3 takes 45-60 bucks and within a week. That's the only thing I have left for y'all.
seokhun said:
There's actually a way I can think of, but I don't know if it will work. As long as you can find the bootloader files for the tablet, you can try to ask someone to JTAG your KFHD7. The process involves taking apart the tablet, using electricity to provide power while re-writing the bootloader so you can end up in fastboot mode. It's not very expensive, a regular Galaxy S3 takes 45-60 bucks and within a week. That's the only thing I have left for y'all.
Click to expand...
Click to collapse
thanks for the reply buddy yeah i guess but i was hoping for a easier way to do it
yes, i searched the diagram but not luck
anyone know where to find it?
napstermisaki said:
yes, i searched the diagram but not luck
anyone know where to find it?
Click to expand...
Click to collapse
So when you plug in your factory cable and power it on it enters fastboot.... correct? But then the computer does not detect the fastboot drivers? I'm a bit confused lol
napstermisaki said:
hi all
I have a question, I have a Kindle Fire HD 7 with TWRP Recovery everything worked but the application nova launcher disappeared could not delete it or reinstall it so I did a wipe, but lost the root when you try to do it again had problems with coomand SU, with wire factory try doing a factory recovery with my backup.
appered after to restore a red screen and my computer does not recognize any new device
micro usb cable = kindle fire logo and red screen after
factory cable = fasboot logo and not recognize any device
not a problem for drivers is a problem with the tab
any ideas to fix?
tnx
Click to expand...
Click to collapse
Have you tried installing kindle first aide tool which can be found on a thread in this forum. I had the same problem with the red screen so I bought a factory cable, directed the computer to the KFF folder and installed the fastboot driver. After that the computer recognised my device and I was able to restore using option 3 of the first aide tool. Hope this helps. Good luck
Sent from my KFTT using xda premium
jmar8124 said:
So when you plug in your factory cable and power it on it enters fastboot.... correct? But then the computer does not detect the fastboot drivers? I'm a bit confused lol
Click to expand...
Click to collapse
jmar8124 is correct, my device enter fasboot mode but the computer no detect device.
Can you send fastboot commands to it? Try "fastboot -i 0x1949 reboot" and see if it reboots. As long as you can send fastboot commands to it, you're good to go.

manual fastboot whitout factory cable

hi
i think there is many people whitout the factory cable so i will say to you how to reboot in fastboot mode kindle fire HD 7
------------------------Kindle Fire in general--------------------
-completly root the device
-on a terminal write:
"adb shell"
"su"
"reboot bootloader"
i hope i can help you if i help you use the thanks botton XD luck
danis1997 said:
hi
i think there is many people whitout the factory cable so i will say to you how to reboot in fastboot mode kindle fire HD 7
------------------------Kindle Fire in general--------------------
-completly root the device
-on a terminal write:
"adb shell"
"su"
"reboot bootloader"
i hope i can help you if i help you use the thanks botton XD luck
Click to expand...
Click to collapse
This is already known and it is recommended that you get a factory cable anyways, but thanks.
Why?
r3pwn said:
This is already known and it is recommended that you get a factory cable anyways, but thanks.
Click to expand...
Click to collapse
Why is it recommended to get a factory cable?
Because if you brick it to the point that its in boot loops or red boot loader screen that command is useless. The command is useful if your not bricked though.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
Because if you brick it to the point that its in boot loops or red boot loader screen that command is useless. The command is useful if your not bricked though.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
+1
Specifically owners of the Kindle Fire 2nd edition and Kindle Fire HD 7" should get fastboot cables.
The Kindle Fire HD 8.9" does NOT need a fastboot cable as that mode is automatically detected by the stock bootloader when a fastboot command is entered before turning the device on.
If you are not worried about bricking your device for a few week period while waiting for a fast boot cable that you may never need then this command is very useful, but if it has too be fixed yesterday then you should not attempt much without a fast boot cable. I built one for fun but there is no way I would have paid for one when I may never need it.
Sent from my XT907 using xda app-developers app
mrkhigh said:
If you are not worried about bricking your device for a few week period while waiting for a fast boot cable that you may never need then this command is very useful, but if it has too be fixed yesterday then you should not attempt much without a fast boot cable. I built one for fun but there is no way I would have paid for one when I may never need it.
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
If you have a KFHD 7" I think you should invest in a fastboot cable anyway. I picked one up off eBay for $4.45 including shipping and it came in a few days. I didn't think I would need it until I ended up bricking my device when I tried to apply a wallpaper fix. Only used it a few times, but it helped me load CM10.1 with confidence.
(Link to eBay, in case anyone is interested: http://www.ebay.com/itm/271190304892)
Bricked
Hashcode said:
+1
Specifically owners of the Kindle Fire 2nd edition and Kindle Fire HD 7" should get fastboot cables.
The Kindle Fire HD 8.9" does NOT need a fastboot cable as that mode is automatically detected by the stock bootloader when a fastboot command is entered before turning the device on.
Click to expand...
Click to collapse
I am stuck in the loading screen (kindlefire text) but not fastboot. I have tried both normal cables and a service cable. I have a Kindle Fire HD 8.9"
Now I just can't connect it with anything? Is it Texas Toast?? Can't get it out of the load screen and can't turn on fastboot. No adb services.
Hello, I have a 2nd Generation Kindle Fire with red screen when I connect in fastboot lights but the pc does not recognize. please help.
danis1997 said:
hi
i think there is many people whitout the factory cable so i will say to you how to reboot in fastboot mode kindle fire HD 7
------------------------Kindle Fire in general--------------------
-completly root the device
-on a terminal write:
"adb shell"
"su"
"reboot bootloader"
i hope i can help you if i help you use the thanks botton XD luck
Click to expand...
Click to collapse
---------------------------------------------------------------------------------
Holy crap! Thank the Gods! I was stuck in a strange bootloop that kept refreshing the Teamwin logo, and that's all it'd do. I was able to successfully install drivers and enable adb. I tried almost every solution (without a factory cable or fastboot capabilities) to reflash the recovery image. Thanks to this, I think I just got my kindle out of a bricked state. Will check back if successful.
Hi i have bricked my kindle fire hd 7 generation 2 tablet. It is not turning on....no changes on screen. Its heating up when connected to charger but not connecting to pc or showing any sign of life. I tried a fastboot cable also
Ugh, I'm the worst. Just bricked the Kindle Fire HD 7" (2013) 3rd Generation trying to Debloat apps which constantly were popping up in the background and crashing Star Wars Heroes two-three times per hour. I was side-loading those apps using "Amazon Fire Tablet Tool" from here at Rootjunky.com
Copied the files over using my regular plain old (NOT fastboot) USB cable and things sort of worked for the past month, downloading various APKs and installing from my Windows 10 Pro desktop pc. But now i'm dead in the water. Tried pressing and holding power & volume for 30-45 seconds to force a reset, but didn't seem to cure the issue. Still stuck at "kindle fire" load screen.
Thanks in advance for any assistance.
mouluca said:
Hi i have bricked my kindle fire hd 7 generation 2 tablet. It is not turning on....no changes on screen. Its heating up when connected to charger but not connecting to pc or showing any sign of life. I tried a fastboot cable also
Click to expand...
Click to collapse
I have the same thing. I havent been finding anything to help me with this problem. I wish you luck also

Amazon Kindle Fire HD Stuck In Fastboot Mode HELP !!!

Hi,
I moved into a new house yesterday and when un packing I found an Amazon Kindle Fire HD that was basically left behind I went to plug it in to my phone charger Micro USB and it began too boot up but then stopped at the Fastboot logo with Kindle Fire under it. Ive never had a Kindle Fire before so not really sure what to do tried connecting it to my Laptop but nothing shows up i.e installs etc. I don't know if it would be bricked or a software fault and tried Power and Volume Up and Down to see if there is a recovery system but they isn't.
I hope one of you guys can help
Thanks
It doesn't show up at all on the device manager with a triangle next to it listed as Tate,jem, otter,or otter 2 does it?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
when i plug my kindle in the pc it does show tate-pvt-08 in device manager and the kindle is stuck in fastboot mode.. any advice?
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
stunts513 said:
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
tried the driver but now in device manager the kindle has that yellow triangle and fastboot is stuck on waiting for device
Yellow triangle probably means the driver is still not installed...
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Stuck at Fastboot Mode
stunts513 said:
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
Hello! First of all, i'm kind of a noob as far as kindle development issues concern, but i managed to install custom roms before (in fact, my brick problema began when i tried to upgrade to CM11 from goo.im). I am really desperate right now because i followed all the instructions in several threads but nothing helped me so far.
Here is my situation:
My kindle fire hd 7" is stuck at Fastboot mode after my failed attempt to upgrade from CM10.1 to CM11. My computer recognizes it as Tate-PVT-08 but it's not accepting any fastboot commands, except for "fastboot -i 0x1949 reboot". When i run this command, my kindle actually "reboots" but goes into fatboot mode again and again. When in "cmd", it doesn't recognize the devices either, but when run command "getvar" shows Tate-PVT-08. In conclusiĆ³n, i want to know if there is a problema with the instalation of cmd in my PC, or if you can recommend any tool to restore my Tablet, even if it means going back to stock OS.
Any help would be very appreciated. Thank you very much in advance.
guillemedina11 said:
Hello! First of all, i'm kind of a noob as far as kindle development issues concern, but i managed to install custom roms before (in fact, my brick problema began when i tried to upgrade to CM11 from goo.im). I am really desperate right now because i followed all the instructions in several threads but nothing helped me so far.
Here is my situation:
My kindle fire hd 7" is stuck at Fastboot mode after my failed attempt to upgrade from CM10.1 to CM11. My computer recognizes it as Tate-PVT-08 but it's not accepting any fastboot commands, except for "fastboot -i 0x1949 reboot". When i run this command, my kindle actually "reboots" but goes into fatboot mode again and again. When in "cmd", it doesn't recognize the devices either, but when run command "getvar" shows Tate-PVT-08. In conclusiĆ³n, i want to know if there is a problema with the instalation of cmd in my PC, or if you can recommend any tool to restore my Tablet, even if it means going back to stock OS.
Any help would be very appreciated. Thank you very much in advance.
Click to expand...
Click to collapse
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
LinearEquation said:
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Click to expand...
Click to collapse
Thank you for taking your time to help me out, appreciate it.
I changed the cord because i realized that i'm already in fastboot mode, so don't need fastboot cable. When i run the command, the Kindle boot logo lasts for few more senconds than with fastboot cable, but still goes into fastboot mode again. Also tried pushing all posible buttons (At blue kindle ffire logo) to reach recovery mode but failed. I'm using Kindle Fire First Aide but doesn't seems to work either.
Any toughts? Thank you.
guillemedina11 said:
Thank you for taking your time to help me out, appreciate it.
Click to expand...
Click to collapse
You're welcome
I changed the cord because i realized that i'm already in fastboot mode, so don't need fastboot cable. When i run the command, the Kindle boot logo lasts for few more senconds than with fastboot cable, but still goes into fastboot mode again.
Click to expand...
Click to collapse
do you see the yellow Kindle Fire boot animation at all?
Also tried pushing all posible buttons (At blue kindle ffire logo) to reach recovery mode but failed.
Click to expand...
Click to collapse
If you see the blue TWRP there may be hope without a doing a factory reset. Press the power button for 30 seconds and power down the KFHD7. Now hit power to turn the Kindle on and as soon as you see the yellow Kindle boot animation hold the volume rocker up and continue to hold it there until until you see the blue TWRP boot animation and continue pressing for three seconds, then release. Do you boot into TWRP? If you see the blue TWRP boot animation you should have it.
I'm using Kindle Fire First Aide but doesn't seems to work either.
Click to expand...
Click to collapse
If you can get into TWRP that might be to your advantage because you can adb.sideload a ROM onto TWRP flash it and go on with it from there. KFFA has been down off and on. It was once a great tool but it needs updated and the Drop Box account associated with it is down at the momnent.
Click to expand...
Click to collapse
LinearEquation said:
guillemedina11 said:
You're welcome
do you see the yellow Kindle Fire boot animation at all?
If you see the blue TWRP there may be hope without a doing a factory reset. Press the power button for 30 seconds and power down the KFHD7. Now hit power to turn the Kindle on and as soon as you see the yellow Kindle boot animation hold the volume rocker up and continue to hold it there until until you see the blue TWRP boot animation and continue pressing for three seconds, then release. Do you boot into TWRP? If you see the blue TWRP boot animation you should have it.
If you can get into TWRP that might be to your advantage because you can adb.sideload a ROM onto TWRP flash it and go on with it from there. KFFA has been down off and on. It was once a great tool but it needs updated and the Drop Box account associated with it is down at the momnent.
Click to expand...
Click to collapse
Mr LinearEquation, thank you so much for your advice.
Following a different thread i managed to boot into TWRP by flashing images of "Freedom Boot" and TWRP itself via fastboot commands. Now in theory i can flash a .zip of any ROM but the thing is that i cannot load zips to the Tablet. even though it's recognized now as KINDLE instead of Tate-PVT-08 in the Device Manager, i'm not able to see the kindle as a Pop-up window where you can drag-and-drop files to the Tablet.
The question is: How do i push a ROM via adb as you mentioned in your previous message? Do you know which file do i need and the proper command to push it?
Kindly Regards.
Click to expand...
Click to collapse
LinearEquation said:
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Help! Mine was stuck in fastboot. When I hit the power button it boots up automatically in fastboot with any device attached to it. Then after a few sec it goes off.
Underurbed said:
Help! Mine was stuck in fastboot. When I hit the power button it boots up automatically in fastboot with any device attached to it. Then after a few sec it goes off.
Click to expand...
Click to collapse
Have you looked at this page? http://forum.xda-developers.com/showthread.php?t=2271909 Maybe the unbricked section (part 6 of first page) can help in particular the SRT tool http://forum.xda-developers.com/showthread.php?t=1951254 . I have also noticed if you scroll down to troubleshooting section on the first page of first link it lists your problem and the steps to resolve it
Sent from my Amazon Tate using Tapatalk
Thank you for the reply. Well, my first problem is the kindle doesn't stay on fastboot. It shuts down after a second.
recovery
Hi I locked mine up also and used a program called
Demo Mode Restore. Basically you shut off your kindle and unplug the charge/data cable run the program and click enter once then says plug you kindle in and when it boots the program catches it before it starts up and all you have to do is follow the directions and when it restarts its like when you first took it out of the box
You`ll have to do a search for Demo Mode Restore
Hope this help. God Bless )
joshuafalls63 said:
I moved into a new house yesterday and when un packing I found an Amazon Kindle Fire HD that was basically left behind I went to plug it in to my phone charger Micro USB and it began too boot up but then stopped at the Fastboot logo with Kindle Fire under it. Ive never had a Kindle Fire before so not really sure what to do tried connecting it to my Laptop but nothing shows up i.e installs etc. I don't know if it would be bricked or a software fault and tried Power and Volume Up and Down to see if there is a recovery system but they isn't.
I hope one of you guys can help
Thanks
Click to expand...
Click to collapse

[Q] X43Z60 stuck at kindle fire logo, nothing work

Hi,
my daughter kindle does not work anymore, yesterday after hard shutdown...
it like 2 week, this kindle act odd. but now, nothing is working. all i did last December was rooting, it work fine.
right now, all it does is stuck in the kindle fire logo, it moving and the lit is on...
I try volume up and turn on, nope.
I try to connect to pc, ADB not recognized.
I do not have an factory cable, do i need a factory to resolve the problem?
I dont think i have a ROM problem. but i dont touch it...
if the problem come from ROM, how/where can I choose the good one
If there is no solution, do Amazon accept rooting tablet
I have Kindle Fire HD, X43Z60
thx for helping
sorry for my bad english
csk84 said:
Hi,
my daughter kindle does not work anymore, yesterday after hard shutdown...
it like 2 week, this kindle act odd. but now, nothing is working. all i did last December was rooting, it work fine.
right now, all it does is stuck in the kindle fire logo, it moving and the lit is on...
I try volume up and turn on, nope.
I try to connect to pc, ADB not recognized.
I do not have an factory cable, do i need a factory to resolve the problem?
I dont think i have a ROM problem. but i dont touch it...
if the problem come from ROM, how/where can I choose the good one
If there is no solution, do Amazon accept rooting tablet
I have Kindle Fire HD, X43Z60
thx for helping
sorry for my bad english
Click to expand...
Click to collapse
I try a fastboot cable/adapter to see if you can restore the os. I recommend the blackhat adapters mentioned in hashcode's 2nd bootloader + twrp tutorial in the development section.
Sent from my Amazon Tate using Tapatalk
stunts513 said:
I try a fastboot cable/adapter to see if you can restore the os. I recommend the blackhat adapters mentioned in hashcode's 2nd bootloader + twrp tutorial in the development section.
Sent from my Amazon Tate using Tapatalk
Click to expand...
Click to collapse
I read in some topic that if the kindle fire logo stay lid indefinitely i'm in fastboot... But i try "fastboot -i 0x1949 getvar product", it show only waiting device, i try to turn off and on, nothing happen.
is that mean, i need a Factory Cable to make it work again??
I don't know where you read that but it is wrong, if it stays on the orange logo it means you are in a bootloop. When in fastboot it will come up on the screen and say "fastboot" in a logo form. You have to have a fastboot cable to get it into fastboot mode when it is stuck in a bootloop that has the orange logo only.
Sent from my Amazon Tate using Tapatalk
stunts513 said:
I don't know where you read that but it is wrong, if it stays on the orange logo it means you are in a bootloop. When in fastboot it will come up on the screen and say "fastboot" in a logo form. You have to have a fastboot cable to get it into fastboot mode when it is stuck in a bootloop that has the orange logo only.
Sent from my Amazon Tate using Tapatalk
Click to expand...
Click to collapse
oh, ok.
It show only " kindle fire " and than animation "kindle fire"
that mean, only way to fix this is with a fastboot cable, factoy cable?
is it like 99% luck to fix it?
i guess i will buy a cable and try to fix it. it still in warranty but it rooted... so no go
it should be completely fixable, no luck involved, just a fastboot adapter, my drivers and the kffa utility and it should be able to restore just fine.
csk84 said:
oh, ok.
It show only " kindle fire " and than animation "kindle fire"
that mean, only way to fix this is with a fastboot cable, factoy cable?
is it like 99% luck to fix it?
i guess i will buy a cable and try to fix it. it still in warranty but it rooted... so no go
Click to expand...
Click to collapse
Rooted won't matter if it's in a bootloop. They only check for external damage and send it back to the factory. If it don't boot into the OS then tell them that and you should get a refurbished one.
Exit: What I mean is that a bootloop prevents them from seeing why this happened. Could happen from many things. Otherwise use Stunts suggestion.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app

Kindle HD 6' Bricked?

Hi, I am having troubles with my kindle HD 6. When I turn it on, it is stuck on the "fire" logo. The only place I can go is the fire system recovery. I have tried setting it to factory defaults, but have had no luck there.
AnArmchair said:
Hi, I am having troubles with my kindle HD 6. When I turn it on, it is stuck on the "fire" logo. The only place I can go is the fire system recovery. I have tried setting it to factory defaults, but have had no luck there.
Click to expand...
Click to collapse
hd 6?
http://www.amazon.com/gp/help/customer/display.html/?nodeId=201263780
Sent from my XT912 using Tapatalk
AnArmchair said:
Hi, I am having troubles with my kindle HD 6. When I turn it on, it is stuck on the "fire" logo. The only place I can go is the fire system recovery. I have tried setting it to factory defaults, but have had no luck there.
Click to expand...
Click to collapse
hd 6 may be difficult to find a fix.
it doesn't look like anything has been posted about it on xda
doesn't look like it got it's own forum like other kindle models.
could this http://forum.xda-developers.com/showthread.php?t=2793253
but not sure.
Sent from my XT912 using Tapatalk
Hey, I appreciate the help anyways. Thank you!
Another quick question. I am using ADB, but my device is unauthorized. I cannot turn on USB debugging since my kindle will not boot the OS. Any solutions?
AnArmchair said:
Another quick question. I am using ADB, but my device is unauthorized. I cannot turn on USB debugging since my kindle will not boot the OS. Any solutions?
Click to expand...
Click to collapse
Nothing you can do about that.
If it was a kindle fire 1, I would suggest getting a fastboot cable, and flash a custom recovery.
You would need to know if your device is compatible with fastboot cables, should be, but if not a fastboot cable can cause damage.
What is a Fastboot Cable
Then you need a compatible custom recovery like Twrp.
Once you have twrp, installing stock ROM should be easy.
I will have to do some searching.
AnArmchair said:
Another quick question. I am using ADB, but my device is unauthorized. I cannot turn on USB debugging since my kindle will not boot the OS. Any solutions?
Click to expand...
Click to collapse
Ok finally did some searching, for some reason your XDA device section is here http://forum.xda-developers.com/fire-hd
suggest you start a new thread in Fire HD 6 and 7 Q&A, Help & Troubleshooting , or I can ask to have this one moved.
doesn't look like the fastboot cable will work with your model
sd_shadow said:
Ok fine did some searching, for some reason your XDA device section is here http://forum.xda-developers.com/fire-hd
suggest you start a new thread in Fire HD 6 and 7 Q&A, Help & Troubleshooting , or I can ask to have this one moved.
doesn't look like the fastboot cable will work with your model
Click to expand...
Click to collapse
I'll ask over there. Thank you so much again for all of your help!

Categories

Resources