Database Develop

[Q] Brick Kindle fire HD 7", red screen after Fireflash.

hello everyboddy !
I have a rooted kindle fire HD 7" with the last update and i have attempted to install:
2nd bootloader
Fireflash
TWRP
CM10
But... when i have try to install twrp with Fireflash a red screen is a appeared after the reboot.
I'm a noob and i'm a little panicked !!! Can you help me to unbrick my kindle, i'm ready to make evrything but i have only in my hand my kindle and the original cable.
Please XDA's community !!!

buy a fastboot cable
this helped me with a red screen http://forum.xda-developers.com/showthread.php?t=1951254

The reason this happened was because you was on 7.3x of the AmazonOS, you needed to flash the 7.23 bootloader first before installing the second bootloader. Only a factory cable and the restore tool will save you now.

I did the same thing and the fast boot cable saved me. Good investment.
Sent from my Kindle Fire HD 7 using xda app-developers app

Also I suggest using hashcodes method rather than using fireflash to install TWRP and cm 10.1. It may look complicated but I've used his method on 3 kindles successfully and I'm a bit of a noob Just make sure you open the command window from the folder in which you saved the files - shift +right click mouse >open command window here. Sorry if you already know this. It just took me ages to figure that out lol! The link is here:
http://forum.xda-developers.com/showthread.php?p=40563958
Sent from my CM10.1 Kindle Fire Hd

Glad I'm not the only one. Have the red screen too.. ordered a cable from skorpn.. can't wait to get it and unbrick this thing. Feeling lost without my device.

i have same issue, red screen on boot. I got fastboot cable and installed tool and image. Now after selecting option 1 it just sits on < waiting for device >
if i run as administrator it says 'fastboot' is not recognized

Pls am in d same dilemma
goodknight001 said:
i have same issue, red screen on boot. I got fastboot cable and installed tool and image. Now after selecting option 1 it just sits on < waiting for device >
if i run as administrator it says 'fastboot' is not recognized
Click to expand...
Click to collapse
Am in the same dilemma as well pls kindly post a solution in case u found a way to resolve. I also bought a fastboot/factory cable as well but cant figure out how to make thingz work

bu,p pleas!

davelinc said:
Also I suggest using hashcodes method rather than using fireflash to install TWRP and cm 10.1. It may look complicated but I've used his method on 3 kindles successfully and I'm a bit of a noob Just make sure you open the command window from the folder in which you saved the files - shift +right click mouse >open command window here. Sorry if you already know this. It just took me ages to figure that out lol! The link is here:
http://forum.xda-developers.com/showthread.php?p=40563958
Sent from my CM10.1 Kindle Fire Hd
Click to expand...
Click to collapse
Actually, I've used the FireFlash method twice now on my Kindle Fire HD, and it's worked flawlessly both times, and takes less than five minutes to complete. But hey, whatever works.

i was also stuck in a red screen loop!
you really need a factory cable
what i did was turn off the kindle fire hd then plug in the cable, i turned on the device, and boom just use the toolkit which you can find on the development thread
i hope this helps!!! i was so frustrated as to why it wouldnt work
also you must have the kindle fire adb drivers.
ONLY FOR THOSE WITH A BROKEN POWER BUTTON: and if you dont happen to have a functioning power button like me, wait until the tablet dies, after just plug in the tablet to your pc with the factory cable that way when it finally recharges it boots up in fastboot, otherwise your tablet will be in red screen forever

Bricked Kindle Fire HD

I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean

You have TWRP installed, right? Does your Kindle Fire logo turn blue while booting?

soupmagnet said:
You have TWRP installed, right? Does your Kindle Fire logo turn blue while booting?
Click to expand...
Click to collapse
i might be in the same boat...my kindle fire logo turns blue and gives me a msg at the bottom to press power button for boot menu
when i do i get normal boot,recover,and reset boot mode...when i click on one it just says booting and power button stays organish red for ever

Maybe you don't have your drivers properly installed
sent from my rooted kindle fire hd 7

Baconrind said:
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
Click to expand...
Click to collapse
If you have twrp installed and the blue kindle boot screen just hit volume down and use the side load feature. But if your fastboot is giving u a problem where u can't hit update driver I would assume it would be because windows is already searching for one still? If so tell windows to skip obtaining from windows update and it finish sooner so u can try to update it manually.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

Baconrind said:
I screwed up installing CM10.1 forgot to put rom onto device and ended up in boot loop.
I got a fastboot cable but the kindle shows as Tate PVT and the update driver box is greyed out. Cant get fastboot or adb to recognise the device.
Is there anyway to recover from this
Thanks
dean
Click to expand...
Click to collapse
Hi Baconrind. Screwing one’s device is a good opportunity to learn new things. At least this is what happened to me and I’m glad I did. A couple of months ago I bought a new KFHD7. I spend "wonderful :laugh:" weeks as the happy owner of a KFHD7 until I started to discover the shortcomings of same, so I started reading xda-developers’ stuff to try to customise the device. First I rooted it to be able to install Google Play Store. The idea was to stay as close to stock as possible. Unfortunately I lost root with the first Amazon OTA update, then I decided to install a second bootloader, TWRP, etc. To do that I followed Hashcode’s method Kindle Fire 2nd-bootloader + TWRP for the Kindle Fire HD 7 but at some point I bricked :crying: my device. I was stuck at the Kindle Fire logo. I spent hours browsing through xda-developers and discovered that the first thing to do was to get a fastboot cable. I did not have the patience to wait for it to come from China or wherever they make them, so I found a couple of posts on the xda forum here and here. I made my own even my soldering capabilities are quite limited. I shut down the KFHD7 and plugged the “fastboot” cable to the PC and then to the Kindle, a couple of seconds later I could see the fastboot logo. Once I saw the fastboot logo I unplugged it and used the regular data transfer cable instead. Before I started the unbricking process proper I downloaded and installed this tool: KFHD_SRT_v1.3.5.-7.3. I followed the onscreen indications and could reset my KFHD7 back to its original state. Good luck.

[Q] Stuck on Kindle Fire Bootloop

This is my 1st time asking for help since I really have never needed it. I got a kindle fire HD 7" and rooted it. I added TWRP and a 2nd bootloader. For a long time I was stuck in TWRP and every time I tried to reboot it would just go back to TWRP. This morning I tried using the Kindle fire utility and selected option one. It seemed like it worked. I then rebooted and now I am stuck on the Kindle Fire boot screen. It shows Kindle fire on the screen, goes black for a few seconds, then back to the kindle fire, then goes black again. It keeps doing this over and over again. I am not able to get back into TWRP now. I am not sure what to do at this point. I have read just about every thread out there and cannot find a similar situation to mine. Any guidence would be appreciated.

OK mistake number one, do not use kindle fire utility on a kfhd, you could easily hard brick the kindle. That was designed for first gen it's and they work a bit differently than yours. OK now that I got that out of the way, does your kindle still have the logo turn blue?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

Thanks for the quick reponse. When I installed the 2nd bootloader and TWRP I got into the bootloop. At that time when it would bootloop it would go from orange to blue twice before going back to TWRP again. After I made the mistake of using the Kindle FIre utility it now just keeps on the kindle fire start-up screen and it is always orange.

You are either going to need a fastboot cable to fix or have some luck getting a command to work... If you open the device manager, and plug your kindle in while its off, does a Tate device show up for a few seconds? If so try updating the drivers on the Tate device to the ones in my signature. From there you should be able to use a fastboot command to get the kindle to boot into fastboot. The command would be "fastboot -i 0x1949 getvar product", but if your not seeing a Tate device then this command will be useless, and I don't wanna finish explaining how to use this command until I know your PC is detecting it, assuming you don't know how to use the fastboot command by itself from a command prompt since I don't know your skill level with android stuff and windows command prompt stuff.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

Thanks again for replying. I would say my experience level is low when it comes to command prompts. I get the basics though. I will check when I get home if I see if a Tate device shows up when I connect with my usb and get back to you. Even when I was in TWRP I was having difficulty seeing my device on the computer to add a custom rom to the sd card. I tried sideloading and tried mounting the sd card but nothing worked. I wish now I would have just left it in TWRP and did some more research. Live and learn I guess. I will let you know what I find out. Thanks again.

Ok. I turned off the Kindle and then attached the USB to the computer. Nothing is being recognized. I see now too that my adb interface is also gone. It appears the computer is no longer picking up anything. When I attach the Kindle to the computer it starts the bootloop again flashing the kindle fire screen over and over again. Let me know your thoughts. Thanks again.

I think your only hope is a fast boot cable, and honestly or just depends how broke it is whether it works or not
Sent from my XT907 using xda app-developers app

Thanks for the reply. So let's say I get a factory cable and I can get into fastboot mode; what are my next steps?

http://forum.xda-developers.com/showthread.php?p=33156486
Sent from my XT907 using xda app-developers app

Ok. I wanted to clarify what I did to get in the situation that I am in. I rooted my device with no issues. I then decided to install a 2nd bootloader and TWRP. After all was done my Kindle Fire HD 7" booted to TWRP. I could not get my computer to show my device so I was stuck. Every time I would reboot it would flash kindle fire in orange, then in Blue, then in Orange, the in Blue then would go back to TWRP. I then put the device with the USB attached to my computer and from TWRP I put the device into fastboot mode. I then used the KFHD SRT v1.3.5 tool and opened the SR.Tool.bat and chose option 1. After it was done I rebooted and now I am stuck on the Kindle fire screen (in orange) and it will show for a few seconds, turn off, then go back to the kindle fire screen again (in orange) and just keep repeating. I ordered a factory cable to try to get back to fastboot mode but since it did not work for me the 1st time I was wondering if anyone had any ideas for me. Thanks in advance.

Are you sure it is a factory/fastboot cable? I would either get them from skorn or proxenusa since I know they are reliable.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

Hello again. I don't have the factory cable yet; I just ordered it yesterday. When I used the fastboot mode the last time I entered the mode from TWRP and was connected to my computer with a regular usb charger. When it was in fastboot mode I selected the option 1 from the tool I mentioned in my previous post. I am just wondering if the fastboot did not work with the KFHD tool I used because I did not have a factory cable connected hence why I am stuck on the Kindle fire screen. What do you think?

No, typically it is said to use a fastboot cable just to get the device into fastboot, then plug the normal cable in afterward.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

For future reference, when you get your kindle back up and running again, you need to flash a custom ROM to boot. The TWRP boot loop stems from trying to boot into stock ROM, it won't work. So just put a ROM on your kindle before you flash bootloader + twrp next time.
Sent from my MB886 using xda app-developers app

Kindle fire stuck in Bootloop

Members,
I need your help for my KINDLE fire 7 " HD stuck at bootlogo. I just came back from work and switched on my KINDLE but it booted and got stuck at 'KINDLE FIRE' boot logo. I tried every possible troubleshooting method, like giving hard reset but nothing works. It switches ON and gets stuck at the LOGO. Going by the forums I know that I need a fastboot cable which I have already ordered and expecting the delivery.
Can you plz guide me how to proceed once I have the cable with me ?
Thanks in advance for your time.

ank707 said:
Members,
I need your help for my KINDLE fire 7 " HD stuck at bootlogo. I just came back from work and switched on my KINDLE but it booted and got stuck at 'KINDLE FIRE' boot logo. I tried every possible troubleshooting method, like giving hard reset but nothing works. It switches ON and gets stuck at the LOGO. Going by the forums I know that I need a fastboot cable which I have already ordered and expecting the delivery.
Can you plz guide me how to proceed once I have the cable with me ?
Thanks in advance for your time.
Click to expand...
Click to collapse
You'll be fine once your fastboot cord arrives. Reference this topic http://forum.xda-developers.com/showthread.php?p=37169349 to return to 7.2.3 stock. And reference this video http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw to get your ADB drivers properly installed.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers

LinearEquation said:
You'll be fine once your fastboot cord arrives. Reference this topic http://forum.xda-developers.com/showthread.php?p=37169349 to return to 7.2.3 stock. And reference this video http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw to get your ADB drivers properly installed.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Thanks bro....as soon as I will give it a try I will let you know. Thanks again

LinearEquation said:
You'll be fine once your fastboot cord arrives. Reference this topic http://forum.xda-developers.com/showthread.php?p=37169349 to return to 7.2.3 stock. And reference this video http://m.youtube.com/watch?v=oaNM-lt_aHw&desktop_uri=/watch?v=oaNM-lt_aHw to get your ADB drivers properly installed.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Hey brother....help me please. I now have the factory cable and I have gone through the page that u suggested. But there seems to be instructions without factory cable and I am getting a lot confused. Can you please suggest me how to proceed on this ?

ank707 said:
Hey brother....help me please. I now have the factory cable and I have gone through the page that u suggested. But there seems to be instructions without factory cable and I am getting a lot confused. Can you please suggest me how to proceed on this ?
Click to expand...
Click to collapse
Fastboot cord uses fastboot commands while in fastboot. This is the link to Kindle Fire FirstAid http://forum.xda-developers.com/showthread.php?t=2096888 Once you follow the steps for setup and run it, you will choose number 3 to go back to 7.2.3 When asked if you want to reboot into fastboot, choose no because you are in fastboot.
You can use the regular USB to get into fastboot mode but not now that you are in a bootloop. After running KFFA to restore to 7.2.3 you will also use it to root and remove OTA updates then install gapps or if you are going to go custom romm with 2nd bootloader and TWRP recovery, skip gapps and move on to the latter. Do NOT use KFFA to install TWRP/2nd bootloader or any ROM. Use FireFlash.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
---------- Post added at 02:15 AM ---------- Previous post was at 01:58 AM ----------
I'm heading to bed in an hour. Be 12 hours and I will be back on again. If you have questions or get confused, ask away so we can get you squared away.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers

LinearEquation said:
Fastboot cord uses fastboot commands while in fastboot. This is the link to Kindle Fire FirstAid http://forum.xda-developers.com/showthread.php?t=2096888 Once you follow the steps for setup and run it, you will choose number 3 to go back to 7.2.3 When asked if you want to reboot into fastboot, choose no because you are in fastboot.
You can use the regular USB to get into fastboot mode but not now that you are in a bootloop. After running KFFA to restore to 7.2.3 you will also use it to root and remove OTA updates then install gapps or if you are going to go custom romm with 2nd bootloader and TWRP recovery, skip gapps and move on to the latter. Do NOT use KFFA to install TWRP/2nd bootloader or any ROM. Use FireFlash.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
---------- Post added at 02:15 AM ---------- Previous post was at 01:58 AM ----------
I'm heading to bed in an hour. Be 12 hours and I will be back on again. If you have questions or get confused, ask away so we can get you squared away.
Sent from my Amazon Kindle Fire HD running CM 10.2 using xda app-developers
Click to expand...
Click to collapse
Yes, I did that and then reboot my Kindle. But it's same and still stuck at boot logo.
Edit: Now it doesn't even turn ON, seems like the battery has drained. Tried wall charger for all night but still dont boots up. Plugged in the fastboot cable but nothing is happening. Please help :crying::crying:

ank707 said:
Yes, I did that and then reboot my Kindle. But it's same and still stuck at boot logo.
Edit: Now it doesn't even turn ON, seems like the battery has drained. Tried wall charger for all night but still dont boots up. Plugged in the fastboot cable but nothing is happening. Please help :crying::crying:
Click to expand...
Click to collapse
So you're saying that you had a bootloop and you ran Kindle Fire FirstAide. Which numbers/options did you press? Plugging that fastboot cord in will power your Kindle Fire HD and send it into fastboot no matter the battery charge. Where did you get the fastboot cord from? A reliable source? I'm only asking because if the battery were low and the wire that connects pins 1 to 4 (think) that energize the Kindle into fastboot mode are somehow faulty, then this would stop the kindle from going into fastboot. However, if the fastboot cord is working, it would seem you have a hard brick. I will look around to see if there is a solution for this.

LinearEquation said:
So you're saying that you had a bootloop and you ran Kindle Fire FirstAide. Which numbers/options did you press? Plugging that fastboot cord in will power your Kindle Fire HD and send it into fastboot no matter the battery charge. Where did you get the fastboot cord from? A reliable source? I'm only asking because if the battery were low and the wire that connects pins 1 to 4 (think) that energize the Kindle into fastboot mode are somehow faulty, then this would stop the kindle from going into fastboot. However, if the fastboot cord is working, it would seem you have a hard brick. I will look around to see if there is a solution for this.
Click to expand...
Click to collapse
Thanks for help mate. I bought it from amazon and it seemed to be the most reliable source http://www.amazon.com/EarlyBirdSavi...ywords=kindle+factory+cable&tag=s601000020-20
I firstly reboot the bootloader couple of times like people suggested me. When that didn't help I restored it and like i gave a detail in other post that it took fair amount of time like 45 mins of reading and writing the .img files. Even the message was prompted that 'Your kindle has been restored to 7.2.3, the only thing is that all this while the display of my Kindle didn't changed and was fixed on 'Fastboot Kindle fire' logo. I was disappointed with this device from start due to that crappy kindle OS which made it way too slow and things kept freezing and crashing all the time. Since I am in colombia and used a freight service for this cable to be delivered, i ended up paying 30 USD for the cable. I don't think I will be sending it for repair , it just don't worth it the expenses for the repair and the shipping cost from Colombia and vice versa. May be will keep experimenting and looking on XDA if at some point of time hard brick issue could be fixed.

Not to ring up the past...
But, I cannot get my kindle to work with adb to save my life.
I have the adb drivers
Fastboot finds the device
Its stuck in bootloop so the only to communicate with it is though fastboot cable.
please help

eddielane71488 said:
But, I cannot get my kindle to work with adb to save my life.
I have the adb drivers
Fastboot finds the device
Its stuck in bootloop so the only to communicate with it is though fastboot cable.
please help
Click to expand...
Click to collapse
adb doesn't work with fastboot, only fastboot commands work with fastboot.

Stuck in bootloop after accidentally converting KFHD Launcher to user app on Titanium
Please Help! My KFHD IS Stuck in bootloop after I accidentally converted Kindle Launcher from system app to user app on Titanium. the kindle continues to run in the background but the image is stuck on the animated kindle fire logo. Any ideas/help would be really appreciated! Thanks

Compilasian said:
Please Help! My KFHD IS Stuck in bootloop after I accidentally converted Kindle Launcher from system app to user app on Titanium. the kindle continues to run in the background but the image is stuck on the animated kindle fire logo. Any ideas/help would be really appreciated! Thanks
Click to expand...
Click to collapse
Reflash the system img. I don't know if you can make changes to an apk via adb.

Kindle fire stuck in Bootloop > Reply to Thread
Rushead said:
Reflash the system img. I don't know if you can make changes to an apk via adb.
Click to expand...
Click to collapse
Thanks for the reply! Unfortunately, I can't turn ADB debugging on because there is no way to get access to the menu system. Is there another manner of fastbooting and of reflashing image you can possibly recommend to bypass not having access to the launcher? Again thanks in advance!

I'm not sure what is possible via fb other than adb. Try googling flash factory image & see what you find. Sorry I can't be of more help.

Compilasian said:
Thanks for the reply! Unfortunately, I can't turn ADB debugging on because there is no way to get access to the menu system. Is there another manner of fastbooting and of reflashing image you can possibly recommend to bypass not having access to the launcher? Again thanks in advance!
Click to expand...
Click to collapse
Yes,there is. The following commands will flash the boot,recovery and system images while in fastboot.
Code:
fastboot -i 0x1949 flash boot boot.img
fastboot -i 0x1949 flash recovery recovery.img
fastboot -i 0x1949 flash system system.img

Hi im having problems with my kindle fire hd 2nd gen. I rooted and installed cm12 or 13 on it and it was working well but i lost root so i flashed Supersu through twrp now my device is bootlooping on the amazon fire boot screen. I couldn't get into fastboot so bought a fastboot cable which has arrived today (2 weeks from china) now when i plug it in the device goes into fastboot mode but my windows 10 shows it in device manager as Other Devices Tate -pvt-08. I cant issue commands through ADB (adb devices just shows nothing connected) if i enter the getvar command i just get waiting for device. I've reinstalled the kindle device driver and still no joy.
I also made a complete backup of my kindle before i rooted it which i have stored safely. but i need to know how i can push them to my kindle and how to make my laptop see the kindle.
I'm struggling now and pretty lost with it all if someone could lend a hand and tell me what im doing wrong

Corduroysack said:
Hi im having problems with my kindle fire hd 2nd gen. I rooted and installed cm12 or 13 on it and it was working well but i lost root so i flashed Supersu through twrp now my device is bootlooping on the amazon fire boot screen. I couldn't get into fastboot so bought a fastboot cable which has arrived today (2 weeks from china) now when i plug it in the device goes into fastboot mode but my windows 10 shows it in device manager as Other Devices Tate -pvt-08. I cant issue commands through ADB (adb devices just shows nothing connected) if i enter the getvar command i just get waiting for device. I've reinstalled the kindle device driver and still no joy.
I also made a complete backup of my kindle before i rooted it which i have stored safely. but i need to know how i can push them to my kindle and how to make my laptop see the kindle.
I'm struggling now and pretty lost with it all if someone could lend a hand and tell me what im doing wrong
Click to expand...
Click to collapse
hi did you ever figure out the issue? i'm also in the same boat, was running with cm13, tried to flash super su using twrp got the boot loop. will go till the white and orange logo and reboots

thomas69k said:
hi did you ever figure out the issue? i'm also in the same boat, was running with cm13, tried to flash super su using twrp got the boot loop. will go till the white and orange logo and reboots
Click to expand...
Click to collapse
cant remember what i did tbh, ive just fired my kndle up first time in a while and the rom im using is Omni Rom 6.0 its old (2016) but works. i remember using adb to push backed up partition images and literally started from scratch. Not much help but it was quite some time ago
thinking of trying this rom at some point as its 2018
https://www.mediafire.com/folder/u7sb7p10ik7v0/tate

Amazon Kindle Fire HD Stuck In Fastboot Mode HELP !!!

Hi,
I moved into a new house yesterday and when un packing I found an Amazon Kindle Fire HD that was basically left behind I went to plug it in to my phone charger Micro USB and it began too boot up but then stopped at the Fastboot logo with Kindle Fire under it. Ive never had a Kindle Fire before so not really sure what to do tried connecting it to my Laptop but nothing shows up i.e installs etc. I don't know if it would be bricked or a software fault and tried Power and Volume Up and Down to see if there is a recovery system but they isn't.
I hope one of you guys can help
Thanks

It doesn't show up at all on the device manager with a triangle next to it listed as Tate,jem, otter,or otter 2 does it?
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

when i plug my kindle in the pc it does show tate-pvt-08 in device manager and the kindle is stuck in fastboot mode.. any advice?

Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app

stunts513 said:
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
tried the driver but now in device manager the kindle has that yellow triangle and fastboot is stuck on waiting for device

Yellow triangle probably means the driver is still not installed...
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

Stuck at Fastboot Mode
stunts513 said:
Right click the device, hit update drivers, download the drivers in my signature, and extract them, point the update device window to where you extracted my drivers and let it install them, if you are on windows 8 you will have to disable driver signature enforcement first. Once the drivers are installed I would suggest trying a simple
Code:
fastboot -i 0x1949 reboot
that might kick it out of fastboot. Tell me how it goes.
Sent from my Amazon Kindle Fire HD using xda app-developers app
Click to expand...
Click to collapse
Hello! First of all, i'm kind of a noob as far as kindle development issues concern, but i managed to install custom roms before (in fact, my brick problema began when i tried to upgrade to CM11 from goo.im). I am really desperate right now because i followed all the instructions in several threads but nothing helped me so far.
Here is my situation:
My kindle fire hd 7" is stuck at Fastboot mode after my failed attempt to upgrade from CM10.1 to CM11. My computer recognizes it as Tate-PVT-08 but it's not accepting any fastboot commands, except for "fastboot -i 0x1949 reboot". When i run this command, my kindle actually "reboots" but goes into fatboot mode again and again. When in "cmd", it doesn't recognize the devices either, but when run command "getvar" shows Tate-PVT-08. In conclusión, i want to know if there is a problema with the instalation of cmd in my PC, or if you can recommend any tool to restore my Tablet, even if it means going back to stock OS.
Any help would be very appreciated. Thank you very much in advance.

guillemedina11 said:
Hello! First of all, i'm kind of a noob as far as kindle development issues concern, but i managed to install custom roms before (in fact, my brick problema began when i tried to upgrade to CM11 from goo.im). I am really desperate right now because i followed all the instructions in several threads but nothing helped me so far.
Here is my situation:
My kindle fire hd 7" is stuck at Fastboot mode after my failed attempt to upgrade from CM10.1 to CM11. My computer recognizes it as Tate-PVT-08 but it's not accepting any fastboot commands, except for "fastboot -i 0x1949 reboot". When i run this command, my kindle actually "reboots" but goes into fatboot mode again and again. When in "cmd", it doesn't recognize the devices either, but when run command "getvar" shows Tate-PVT-08. In conclusión, i want to know if there is a problema with the instalation of cmd in my PC, or if you can recommend any tool to restore my Tablet, even if it means going back to stock OS.
Any help would be very appreciated. Thank you very much in advance.
Click to expand...
Click to collapse
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app

LinearEquation said:
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Click to expand...
Click to collapse
Thank you for taking your time to help me out, appreciate it.
I changed the cord because i realized that i'm already in fastboot mode, so don't need fastboot cable. When i run the command, the Kindle boot logo lasts for few more senconds than with fastboot cable, but still goes into fastboot mode again. Also tried pushing all posible buttons (At blue kindle ffire logo) to reach recovery mode but failed. I'm using Kindle Fire First Aide but doesn't seems to work either.
Any toughts? Thank you.

guillemedina11 said:
Thank you for taking your time to help me out, appreciate it.
Click to expand...
Click to collapse
You're welcome
I changed the cord because i realized that i'm already in fastboot mode, so don't need fastboot cable. When i run the command, the Kindle boot logo lasts for few more senconds than with fastboot cable, but still goes into fastboot mode again.
Click to expand...
Click to collapse
do you see the yellow Kindle Fire boot animation at all?
Also tried pushing all posible buttons (At blue kindle ffire logo) to reach recovery mode but failed.
Click to expand...
Click to collapse
If you see the blue TWRP there may be hope without a doing a factory reset. Press the power button for 30 seconds and power down the KFHD7. Now hit power to turn the Kindle on and as soon as you see the yellow Kindle boot animation hold the volume rocker up and continue to hold it there until until you see the blue TWRP boot animation and continue pressing for three seconds, then release. Do you boot into TWRP? If you see the blue TWRP boot animation you should have it.
I'm using Kindle Fire First Aide but doesn't seems to work either.
Click to expand...
Click to collapse
If you can get into TWRP that might be to your advantage because you can adb.sideload a ROM onto TWRP flash it and go on with it from there. KFFA has been down off and on. It was once a great tool but it needs updated and the Drop Box account associated with it is down at the momnent.
Click to expand...
Click to collapse

LinearEquation said:
guillemedina11 said:
You're welcome
do you see the yellow Kindle Fire boot animation at all?
If you see the blue TWRP there may be hope without a doing a factory reset. Press the power button for 30 seconds and power down the KFHD7. Now hit power to turn the Kindle on and as soon as you see the yellow Kindle boot animation hold the volume rocker up and continue to hold it there until until you see the blue TWRP boot animation and continue pressing for three seconds, then release. Do you boot into TWRP? If you see the blue TWRP boot animation you should have it.
If you can get into TWRP that might be to your advantage because you can adb.sideload a ROM onto TWRP flash it and go on with it from there. KFFA has been down off and on. It was once a great tool but it needs updated and the Drop Box account associated with it is down at the momnent.
Click to expand...
Click to collapse
Mr LinearEquation, thank you so much for your advice.
Following a different thread i managed to boot into TWRP by flashing images of "Freedom Boot" and TWRP itself via fastboot commands. Now in theory i can flash a .zip of any ROM but the thing is that i cannot load zips to the Tablet. even though it's recognized now as KINDLE instead of Tate-PVT-08 in the Device Manager, i'm not able to see the kindle as a Pop-up window where you can drag-and-drop files to the Tablet.
The question is: How do i push a ROM via adb as you mentioned in your previous message? Do you know which file do i need and the proper command to push it?
Kindly Regards.
Click to expand...
Click to collapse

LinearEquation said:
Are you using a fastboot cord? If so that's why. Use that command and then pull the cord from the computer as soon as it restarts.
Sent from my Nexus 7 Flo running CM 11 4.4.2 with ElementalX Kernel using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Help! Mine was stuck in fastboot. When I hit the power button it boots up automatically in fastboot with any device attached to it. Then after a few sec it goes off.

Underurbed said:
Help! Mine was stuck in fastboot. When I hit the power button it boots up automatically in fastboot with any device attached to it. Then after a few sec it goes off.
Click to expand...
Click to collapse
Have you looked at this page? http://forum.xda-developers.com/showthread.php?t=2271909 Maybe the unbricked section (part 6 of first page) can help in particular the SRT tool http://forum.xda-developers.com/showthread.php?t=1951254 . I have also noticed if you scroll down to troubleshooting section on the first page of first link it lists your problem and the steps to resolve it
Sent from my Amazon Tate using Tapatalk

Thank you for the reply. Well, my first problem is the kindle doesn't stay on fastboot. It shuts down after a second.

recovery
Hi I locked mine up also and used a program called
Demo Mode Restore. Basically you shut off your kindle and unplug the charge/data cable run the program and click enter once then says plug you kindle in and when it boots the program catches it before it starts up and all you have to do is follow the directions and when it restarts its like when you first took it out of the box
You`ll have to do a search for Demo Mode Restore
Hope this help. God Bless )
joshuafalls63 said:
I moved into a new house yesterday and when un packing I found an Amazon Kindle Fire HD that was basically left behind I went to plug it in to my phone charger Micro USB and it began too boot up but then stopped at the Fastboot logo with Kindle Fire under it. Ive never had a Kindle Fire before so not really sure what to do tried connecting it to my Laptop but nothing shows up i.e installs etc. I don't know if it would be bricked or a software fault and tried Power and Volume Up and Down to see if there is a recovery system but they isn't.
I hope one of you guys can help
Thanks
Click to expand...
Click to collapse