3g/H+ of SFR issue - Galaxy Note GT-N7000 Q&A, Help & Troubleshooting

Hey
I am on having a rooted Galaxy Note GT N-7000 and using SFR sim with data enabled. The data work fine for texting and using navigation etc.
However, when i call/receive Viber calls or similar software calls using data network it doesn't transmit nor receive conversation after first 5-10 seconds.
I tried to get it fixed through manually adding APN settings and have also contacted service center but to no effect. I would greatly appreciate if someone can help me in this ??

Related

[Q] Getting Unlock to work on Tmobile P1000 Galaxy Tab

Okay, here goes! First post here, and hopefully a useful one for others.
The prerequisite info:
T-mobile Galaxy Tab flashed to GT-P1000
Firmware Version 2.2
Baseband version T959TLJL3_ROTO-2G / w/ switch: T849UVJJB_ROTO3G
Kernel version 2.6.32.9 [email protected] #1
Build number FROYO.XXJME
I purchased this Gtab stock, and went through Rotohammers tutorial for using the tablet as a phone while still retaining 3g capabilities of a data plan. I think I got all of that working correctly but can't verify it as I don't have a T-mobile sim card with data. (verified voice calling does work on the Tab on T-mobile)
I have since then installed Sipdroid and Google Voice with a PBXes trunk so that I can make free wifi calls using Google Voice to/from anywhere with wifi, or on 3g. All that is working great. ....BUT....
I thought the Gtab was unlocked with Roto's firmware, but I found out it wasn't when I inserted my AT&T based sim card (Actually "Consumer Cellular") It was saying "enter network lock control key" on startup with that sim installed.
I found an unlocking app in the market called Galaxy_S Unlock and went through the steps to unlock the Gtab for my AT&T card and it will not make or receive calls. In the settings it shows my phone number for the sim card, and has the IMEI # and such, but no worky. I'm wondering if there is a conflict in the settings of the device with Google Voice and/or SipDroid? All of those use the dialer app that the Euro firmware has on it... I can make Wifi calls with the dialer, but when I disconnect the wifi it doesn't connect the call. It all closes down as if the call ended. Any help on this, or do I NEED to remove the Sipdroid app or could there be some APN issues? BTW data doesn't work either on the sim card in either 2g or 3g modems that I used from Roto. I know I will probably have to use a different AT&T modem for the 3g, but the 2g one should work, right?
Update: Okay, got 2g data to work after going in and changing the APN settings for Consumer Cellular (AT&T). It still closes the dialer app when I try to make a voice call with the wifi disconnected. On the 3g modem it only gets Edge network just like the 2G setting. I'm going to try uninstalling Google Voice and see what happens.
Hooray, problem fixed... at leat partially!
Okay, uninstalling Google Voice fixed the problem. Now I need to figure out how to keep my free Wifi calling capabilities while still having Google Voice installed. Any ideas?
Problem solved!
Okay, got EVERYTHING working now with the exception of the correct modem for 3g on AT&T. I went back through and re checked my data settings, reinstalled google voice and now everything works as it should. When wifi is available my calls use wifi and when there isn't wifi it uses my sim cards cellular service. I just need the 3g modem for AT&T and I'll be set. I had to set up Google Voice so that it would prompt me to either use or not use GV to make the call and now everything is perfect. Free wifi calls on my Gtab and now a back up phone if my current one craps out. Yay!
great to hear that.
Now you might want to read the success story here:
http://forum.xda-developers.com/showthread.php?t=1258782&highlight=850mhz
But you have a T-Mobile tab there. Not sure if flashing AT&T modem works for it.
Let us know if you are successful.
You won't get 3g. If you use JK3 modem on t-mobile tab you will get good voice, EDGE data. You won't need the modem switch.

[Q] Mobile data not working in Stock 2.3.6 Rom (Solved)

So I had the Australian Optus version of 2.3.6 running on my i9000, which was loaded up with bloatware.
I flashed 2.3.6 using tchindalias's method (found here: http://forum.xda-developers.com/showthread.php?t=1802778), and since have not been able to use Mobile Networks (i.e. packet data and MMS).
I can make phone calls and send SMS fine. My wi-fi also works fine.
I have configured my APN settings according to what it says at http://www.tpg.com.au/support/handset_settings.php#1.1, (TPG is my carrier), and my IMEI number under my battery matches what it says in my settings menu.
It says in my notification bar that there is packet data being sent and received (The orange and green arrows next to a E/3G/G/H), but when I try to load something it just won't load no matter how long I leave it.
So what I'm asking is, could somebody please help me out in getting Mobile Networks working again? I've looked around the forums for a while and haven't found much of a solution.
EDIT: So it only took a bit of time for the problem to resolve itself... Turns out reconfiguring my APN settings fixed the problem.

missing/disappearing calls with tmobile s6

Hi does anyone else have disappearing calls when connected to LTE using a tmobile based s6?
This issue only occurs when LTE is active.
An incoming call will ring once or twice and go straight to voice-mail even though I have full bars
srzbznz said:
Hi does anyone else have disappearing calls when connected to LTE using a tmobile based s6?
This issue only occurs when LTE is active.
An incoming call will ring once or twice and go straight to voice-mail even though I have full bars
Click to expand...
Click to collapse
Go to your Phone App settings and turn off Wifi calling and VoLTE.
I'm sorry I have already disabled WiFi calling, and the problem persists but also - I don't have a separate 'VolTE' setting to toggle. Is it because it only appears if I have a T-mobile sim card inserted?
Thanks for your help!
EDIT for anyone who may run in to this issue: I fixed this by flashing Emporia Rom by iB4STiD, it seems to disable whatever t-mobile left over sorcery that was messing with AT&T calling because the rom is not based on t-mobile firmware
Now the calls come through 99% of the time but sometimes takes about 5 rings to connect to me. . arrr
srzbznz said:
I'm sorry I have already disabled WiFi calling, and the problem persists but also - I don't have a separate 'VolTE' setting to toggle. Is it because it only appears if I have a T-mobile sim card inserted?
Thanks for your help!
EDIT for anyone who may run in to this issue: I fixed this by flashing Emporia Rom by iB4STiD, it seems to disable whatever t-mobile left over sorcery that was messing with AT&T calling because the rom is not based on t-mobile firmware
Now the calls come through 99% of the time but sometimes takes about 5 rings to connect to me. . arrr
Click to expand...
Click to collapse
happens to me on even international firmware too. only works well right when i reboot the phone.
I have this issue also with a tmobile s6 on att. What method did you use to unlock the phone? I used the metro pcs firmware to unlock the phone and when I updated to 5.1.1 is when all the issues started. On 5.0.2 I used the tmobile unlock app and everything worked perfect. I receive one in every 3 incoming calls, like you said it rings twice and mine doesn't even go my voicemail, it just says "the wireless number you are trying to contact is unavailable then hangs up", out going calls take 30 seconds to a minute to connect, very annoying. Talked with att on the phone for hours about this problem and they cant seem to get it fixed on their end.
Same...I disabled lte and just use 4g, seems to work fine.

Note 5 WiFi Calling Issue

Hello,
I don't know what I'm doing wrong here but when I'm on WiFi calling on my Note 5 I don't receive any incoming calls. I'm not rooted and the only thing I've done to the phone is disable bloatware using Package Pro Disabler. My WiFi is set to always on when the phone is sleeping. I've wiped the phone twice already trying to resolve the issue. T-Mobile has no idea why it's happening and of course I've been testing this out on multiple WiFi networks all with the same results. Its really frustrating as I live in a house with low signal and at my job I have no signal at all. Outgoing calls aren't an issue - only incoming calls. Just an FYI - I've tested on 6 different WiFi networks and all with the same results. Frustrating!
did u accidentally disable something u shouldn't have? my suggestion is factory reset and dont install PPD and see if it work.

Not receiving SMS on 1 sim other sim works fine

Issue I have is sim 1 (bell Canada) which I have set for calls only receives SMS if I make a call or switch airplane mode on and off. Then I'll get them all. Sim 2 (Freedom Mobile Canada) rli use for data receives SMS right away. Not sure what's happening anybody any ideas. This happens on stock messaging app and on Android messages. Any help would be appreciated. Need text to work properly.

Categories

Resources