Trickdroid 8.0.0 Sense
Bulletproof kernel 3.4.10
S-On but did tamper reset (Should I be S-Off?)
Was using bluetooth connection to car stereo. When I got out of car the phone was dead and would not switch back on. The LED's would flash for a bit then nothing. Bootloader would not load either.
Connected to PC. It saw HTC but had yellow exclamation mark. Tried a few times without success. Tried light in sensors trick and nothing for a bit. Then the HTC had the disconnection sound in Windows. After a while it rebooted.
Plenty of charge (79%)
Ideas?
Related
Hi guys,
i installed the TrickDroid 2.0.0 ROM Google Edition 4.3 on my HTC One on wednesday this week, everything seemed well and worked.
Yesterday i connected it to the charger before i went to bed (original HTC charger).
Today i woke up and the green LED was on (indicating the battery was fully loaded) as usual.
I grabbed the phone but cant turn it on, the green LED stays on even after disconnecting from the charger.
Long holding the power button or even power+volume down semms not to work.
When i connect it to the computer windows makes this "something was connected on USB" sound but no device pops up in windows explorer.
I don't even know if the device is on, i cant call my self up, because i put it in plane mode before going to bed :/
Do you know this issue? What can i Do?
I can't use fastboot, it always says it's "waiting for device"
Any suggestions?
BTW: I unlocked it with the developer certificate from HTC - if it matters
Hi Again,
so the problem has disappeared magically.
I tried to hold down power and volume down again and after 5 seconds the green LED went out and the device booted up again.
I tried it like 10 times before that and it didnt work.
So Problem's solved ... i guess.
Thanks anyway!
My M7 is on AT&T running Insert Coin Sixth Sense v2.3.1, S-off with Rumrunner. My issue is this...
If I try to charge my phone powered down, it appears to be hanging up on this screen on shutdown that displays the red HTC text from the bootloader, along with a battery icon. The red LED light is illuminated in the speaker grill, but when I wake up in the morning, the light is still red. I have to actually hold the power button down, which makes the capacitive buttons flash, until the phone hard reboots. When it powers back on, after about a few minutes of being on my start screen, the LED turns from red to green, and the power indicators say 100%.
Is there something wrong with what is happening here? Should I be concerned, or is this no big deal? I have been typically charging my phone while on all of the time at night, since I use it as an alarm clock. I don't believe it is an issue with the ROM, as it has been happening with Viper & stock rooted versions I've run recently.
Thanks in advance for any help.
mjwitt2 said:
My M7 is on AT&T running Insert Coin Sixth Sense v2.3.1, S-off with Rumrunner. My issue is this...
If I try to charge my phone powered down, it appears to be hanging up on this screen on shutdown that displays the red HTC text from the bootloader, along with a battery icon. The red LED light is illuminated in the speaker grill, but when I wake up in the morning, the light is still red. I have to actually hold the power button down, which makes the capacitive buttons flash, until the phone hard reboots. When it powers back on, after about a few minutes of being on my start screen, the LED turns from red to green, and the power indicators say 100%.
Is there something wrong with what is happening here? Should I be concerned, or is this no big deal? I have been typically charging my phone while on all of the time at night, since I use it as an alarm clock. I don't believe it is an issue with the ROM, as it has been happening with Viper & stock rooted versions I've run recently.
Thanks in advance for any help.
Click to expand...
Click to collapse
So you are using twrp 2.7.0.0 ? switch back to twrp 2.6.3.3 or 2.6.3.4 and your phone will go in charging mode normally.
I just had another issue related to backing up my rom with this version of TWRP. I JUST flashed back to 2.6.3.3 and by backup ran successfully. So this also fixes the charging issue, huh? I've searched and searched, but never considered it would be the recovery. Thanks a bunch!
Hi all,
got another interesting one: Whenever I turn off my M7 and plug in the power cord, the little red light and the screen come on- but then then they stay that way. The screen doesn't turn off anymore like it usually does and the inidicator red stays red, the battery doesn't even seem to load. I have to do a hard reset to get it to boot again, otherwise it won't react.
It doesn't make a difference if the cord is already plugged in when turning it off or plugging it in afterwards. When the phone is on, everything works fine.
Any ideas?
I installed the latest KitKat ARHD last week, now I tried the GPE to see if that fixes it- but it's the same with both of them.
Murdock80 said:
Hi all,
got another interesting one: Whenever I turn off my M7 and plug in the power cord, the little red light and the screen come on- but then then they stay that way. The screen doesn't turn off anymore like it usually does and the inidicator red stays red, the battery doesn't even seem to load. I have to do a hard reset to get it to boot again, otherwise it won't react.
It doesn't make a difference if the cord is already plugged in when turning it off or plugging it in afterwards. When the phone is on, everything works fine.
Any ideas?
I installed the latest KitKat ARHD last week, now I tried the GPE to see if that fixes it- but it's the same with both of them.
Click to expand...
Click to collapse
This problem is usually caused by the custom recovery. Irc, it was a problem with a unique twrp version, can't remember which one exactly. Red light stays on and screen never turn off when power cable is connected.
alray said:
This problem is usually caused by the custom recovery. Irc, it was a problem with a unique twrp version, can't remember which one exactly. Red light stays on and screen never turn off when power cable is connected.
Click to expand...
Click to collapse
Damn, you're the man! I remembered downgrading TWRP sind ARHD wouldn't install with the latest one.
Reverted back to the latest version and everything is working fine again.
Thanks!
Hlw,greetings.
I have a htc one, which was running smoothly until last week when I was browsing facebook and suddenly it hanged and turned off. after then it is not turning on again. when I press power button sometimes only the htc screen splashes.
I tried possibly all button combination and the promiximaty sensor trick with no luck.
I have tried to flash RUU, but unfortunately every time there remains some error.
my pc is recognizing my phone as QHUSB_DLOAD. so I tried the linux method. But
I failed due to some unknown error.
my phones led light flashes when I pluges it in. after trying some button combination
I can turn it to solid red then to solid green. But the brightness of the green light is lower then it should be what in normal cases.
now I don't know what to do? I found so many person having this problem, but no fix is working for me . I thought flashing RUU would help me, but It.didn't.
My HTC Desire 510 from EE in the UK will not reboot after I used the shutdown menu to select 're-start'. It is just a dark screen. Cannot even do a hard reset with 'power-on' and 'volume down' buttons. I have tried taking out the battery, and then doing a hard reset and again nothing. I have left it charging overnight with the original HTC charger and again nothing. None of the charging lights come on either.
I have tried to plug it into the Windows 7 PC with the USB cable and it looks like it is intermittently 'seeing' the HTC but saying the 'device is not recognised' but then the unrecognised device disappears from the Windows USB ports and then again a few seconds later get a 'device not recognised' message with the unknown USB device briefly visible and then it disappears again.
Have not made any modification to the OS since getting it from EE/HTC apart from installing apps and updates. The phone has not been dropped, or got wet or in any other way physically damaged and was working fine.
Any advice/help would be very much appreciated.