[Q] HTC ONE - Sprint HTC One (M7)

Hi guys. I was installing a ROMS and now my HTC ONE does not load the system. It leave like stuck in the screen of fast boot. Any of you knows how to resolve this problem. Any help is welcome.

elgalo said:
Hi guys. I was installing a ROMS and now my HTC ONE does not load the system. It leave like stuck in the screen of fast boot. Any of you knows how to resolve this problem. Any help is welcome.
Click to expand...
Click to collapse
Try rewiping and flashing the Rom again. U should provide more info such as S-off or s-on? What Rom? What were your steps to flash? And what recovery are u using?
Sent from my HTCONE using xda premium

Also depending on the ROM you picked you may or may not have to flash a boot IMG aswell.

FrostyF7 said:
Also depending on the ROM you picked you may or may not have to flash a boot IMG aswell.
Click to expand...
Click to collapse
If OP flashed a .zip, it usually should include the boot.img for them. Usually, anyway.

Related

HTC Vivid Randomly Reboots with Custom Rom?

I was wondering if anyone else has a problem with there vivid randomly rebooting on it's own! It will randomly happen once or twice a day which wouldn't be a problem except it generally occurs at the worst time possible i.e. when I'm on the phone. I'm currently running ICS-sense 3.6-kernel 3.0.36 Holics_0716-Holics rom v1.0 even though i could have sworn i downloaded v1.2 but in the about phone section it says the software # is v1.0. Thanks in advance for any feedback!
I think it's an issue with Holics kernal. Try a different kernal. I like faux myself.
Sent from my HTC PH39100 using Tapatalk 2
Cor-master said:
I think it's an issue with Holics kernal. Try a different kernal. I like faux myself.
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
I'll definitely look into it and give it a try thanks. Oh and i have S-ON so can i just grab the boot img from the kernel and drop replace the one in my orginal folder on my pc with the new img. and the just flash it through fastboot. Or do i need to download anything to my sd card in order to flash it? Still new to all of this! Thanks for your help!
mroane84 said:
I'll definitely look into it and give it a try thanks. Oh and i have S-ON so can i just grab the boot img from the kernel and drop replace the one in my orginal folder on my pc with the new img. and the just flash it through fastboot. Or do i need to download anything to my sd card in order to flash it? Still new to all of this! Thanks for your help!
Click to expand...
Click to collapse
Yes, you'll still have to flash the zip after the fastboot...
Fastboot for the kernel
Flash for the kernel lib...if you don't flash WiFi won't work
Sent from my HTC Holiday using Tapatalk 2
mg2195 said:
Yes, you'll still have to flash the zip after the fastboot...
Fastboot for the kernel
Flash for the kernel lib...if you don't flash WiFi won't work
Sent from my HTC Holiday using Tapatalk 2
Click to expand...
Click to collapse
Okay so i got a little free time i downloaded another kernel and i put it onto the sd card. I then flashed the kernel through my pc using fastboot.
I then restarted the phone into recovery and tried to flash the zip file for the kernel that i downloaded and it keeps coming up with an error saying something like E:\ update pack not found. ( Or something along those lines) Any idea what that's all about?
hello, do you fix your problem?
i`ve the same....can you tell me what did you do?
thanks
savylop said:
hello, do you fix your problem?
i`ve the same....can you tell me what did you do?
thanks
Click to expand...
Click to collapse
Sorry haven't been on in a while and sorry to say i haven't fixed the problem. I have actually created a few more for myself. If i don't end up tossing this phone and i do figure out how to fix the problem i will be sure to repost my findings. Have a great day!

CM 7 stuck on boot animation:

Hi Guys,
Yesterday I tried to flash CM7 latest nightly build on my Incredible S, but got stuck on boot animation.
I was on NIK project X v4, I assume that that zip is missing something that's why I didn't boot.
Can anyone help me with the same??
mohitgalaxy3 said:
Hi Guys,
Yesterday I tried to flash CM7 latest nightly build on my Incredible S, but got stuck on boot animation.
I was on NIK project X v4, I assume that that zip is missing something that's why I didn't boot.
Can anyone help me with the same??
Click to expand...
Click to collapse
Have not had that issue
Nonverbose said:
Have not had that issue
Click to expand...
Click to collapse
I have flashed CM7 lastest nightly and I didn't boot it up and at the same time I have flashed the gbgapps zip as well.
Can that be a problem or not ??
Figured it out my self, flashing the google app without booting cause the boot loop.
Thread closed
Nonverbose said:
Have not had that issue
Click to expand...
Click to collapse
Ok one more thing, you are using CM7, so can you guide me to some MODS, themes some good stuff?
mohitgalaxy3 said:
Ok one more thing, you are using CM7, so can you guide me to some MODS, themes some good stuff?
Click to expand...
Click to collapse
I use ics theme https://play.google.com/store/apps/details?id=com.sonny.theme.ics
Also GO launcher
Nonverbose said:
I use ics theme https://play.google.com/store/apps/details?id=com.sonny.theme.ics
Also GO launcher
Click to expand...
Click to collapse
Wifi is not working for me, please help what should I do, should I replace wpa_supplicant file.
Go backup must have restored access points that could be a problem??
If yes can you please upload your wpa_supplicant file, you will find it in data\misc\wifi..
mohitgalaxy3 said:
Wifi is not working for me, please help what should I do, should I replace wpa_supplicant file.
Go backup must have restored access points that could be a problem??
If yes can you please upload your wpa_supplicant file, you will find it in data\misc\wifi..
Click to expand...
Click to collapse
Sounds like you're s-on and either didn't flash your boot.img in fastboot or, more likely didn't push your wifi module (/system/lib/modules/bcm4329.ko)
Nonverbose said:
Sounds like you're s-on and either didn't flash your boot.img in fastboot or, more likely didn't push your wifi module (/system/lib/modules/bcm4329.ko)
Click to expand...
Click to collapse
I have S-OFF, black rose.
No I haven't flash boot.img in fastboot.
Tell me what exactly i need to do make it working please.
Should I flash/push the wifi module from any other sense 4 rom, will that do the trick??
mohitgalaxy3 said:
I have S-OFF, black rose.
No I haven't flash boot.img in fastboot.
Tell me what exactly i need to do make it working please.
Should I flash/push the wifi module from any other sense 4 rom, will that do the trick??
Click to expand...
Click to collapse
If you're s-off you shouldn't be having that issue. Did you clear cache and dalvik when you flashed cm7?
Edit: what version radio are you on?
Nonverbose said:
If you're s-off you shouldn't be having that issue. Did you clear cache and dalvik when you flashed cm7?
Edit: what version radio are you on?
Click to expand...
Click to collapse
I have flashed the ARDH wipe script bfr flashing CM7 and I am on 11_M. the ics one radio.
mohitgalaxy3 said:
I have flashed the ARDH wipe script bfr flashing CM7 and I am on 11_M. the ics one radio.
Click to expand...
Click to collapse
Try rolling back to revolutionary hboot and a GB radio (the one in my sig is good) and see if that makes a difference. Remember to clear the cache after you have flashed them.
This might help getting back to revolutionary http://forum.xda-developers.com/showpost.php?p=26909973&postcount=13
Nonverbose said:
Try rolling back to revolutionary hboot and a GB radio (the one in my sig is good) and see if that makes a difference. Remember to clear the cache after you have flashed them.
This might help getting back to revolutionary http://forum.xda-developers.com/showpost.php?p=26909973&postcount=13
Click to expand...
Click to collapse
really for just wifi, I have to do that much???
mohitgalaxy3 said:
really for just wifi, I have to do that much???
Click to expand...
Click to collapse
2 things? No you don't have to do it, and as I don't have the issue I cant even say that it will work. There's always other options...

HTC Incredible S

Hi im from australia and i accidently wiped my phone and data but before that i had rooted the phone and well accidently deleted the OS cause my phone kept freezing on HTC anyway i need the RUU for my Htc but i keep getting error 140 and my phone is on RELOCKED so could anyone link a RUU for my phone Thank you
I believe that error means you are trying to run an old RUU.
You can download a new one from htcdev website I think.
Why don't you unlock your bootloader and just flash a custom rom?
oglocswagger said:
Hi im from australia and i accidently wiped my phone and data but before that i had rooted the phone and well accidently deleted the OS cause my phone kept freezing on HTC anyway i need the RUU for my Htc but i keep getting error 140 and my phone is on RELOCKED so could anyone link a RUU for my phone Thank you
Click to expand...
Click to collapse
eRadicant said:
I believe that error means you are trying to run an old RUU.
You can download a new one from htcdev website I think.
Why don't you unlock your bootloader and just flash a custom rom?
Click to expand...
Click to collapse
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
What he said!!!!!!
oglocswagger said:
Hi im from australia and i accidently wiped my phone and data but before that i had rooted the phone and well accidently deleted the OS cause my phone kept freezing on HTC anyway i need the RUU for my Htc but i keep getting error 140 and my phone is on RELOCKED so could anyone link a RUU for my phone Thank you
Click to expand...
Click to collapse
Yep. I had the same issue. I wasn't able to install the original RUU.
Try Nik rom. It is very good, faster and fiable, better than the HTC RUU. You just need to unlock your phone through HTCdev, falsh the recovery and flash bootload, and then install the rom.
Take a look in this link (Nik rom): http://forum.xda-developers.com/showthread.php?t=2153205
rodrijob said:
Yep. I had the same issue. I wasn't able to install the original RUU.
Try Nik rom. It is very good, faster and fiable, better than the HTC RUU. You just need to unlock your phone through HTCdev, falsh the recovery and flash bootload, and then install the rom.
Take a look in this link (Nik rom): http://forum.xda-developers.com/showthread.php?t=2153205
Click to expand...
Click to collapse
i installed it then i rebooted it and it goes back to recoverymod any suggestions ? thnaks
oglocswagger said:
i installed it then i rebooted it and it goes back to recoverymod any suggestions ? thnaks
Click to expand...
Click to collapse
Err... can you provide us with more info, like what recovery u were using? Did the ROM SUCCESSFULLY flash or did it give some error???
072665995 said:
Err... can you provide us with more info, like what recovery u were using? Did the ROM SUCCESSFULLY flash or did it give some error???
Click to expand...
Click to collapse
im using recovery-clockwork-5.0.2.0-vivo And heres a photo of the phone being installed [/ATTACH][/ATTACH]
oglocswagger said:
i installed it then i rebooted it and it goes back to recoverymod any suggestions ? thnaks
Click to expand...
Click to collapse
Hi did you flash the boot image? You need to flash it. The boot.img file is inside the ZIP file. Do you know how to flash it? If you want I can post you a step by step to do it.
Regards,
Rodrijob.
rodrijob said:
Hi did you flash the boot image? You need to flash it. The boot.img file is inside the ZIP file. Do you know how to flash it? If you want I can post you a step by step to do it.
Regards,
Rodrijob.
Click to expand...
Click to collapse
Umm nope lol could you please? Thank you!
Thank you all it worked
flash rom
oglocswagger said:
Thank you all it worked
Click to expand...
Click to collapse
You' re welcome. Did you flash the rom Nik 3.0 (that one I put in dropbox?) Or the Nik 3.6?
I notice yesterday that the version 3.6 is draining power quickly.
The 3.0 version is better and works pretty good.
rodrijob said:
You' re welcome. Did you flash the rom Nik 3.0 (that one I put in dropbox?) Or the Nik 3.6?
I notice yesterday that the version 3.6 is draining power quickly.
The 3.0 version is better and works pretty good.
Click to expand...
Click to collapse
omg yes the battery died in like 30 mintues of using it thanks ! i'll download the dropbox one
Rom Nik 3.0
oglocswagger said:
omg yes the battery died in like 30 mintues of using it thanks ! i'll download the dropbox one
Click to expand...
Click to collapse
Ok, just download it and place it in the root of your sdcard device. Then with Rom manager (or in recovery mode with clockworkmod) choose option "Install Rom from SDcard", than chose the rom you placed in the SDcard and follow the instructions. I recomend a full wipe.
Finally flash the boot image with the boot.img file of this rom (I am attaching the file) and it's done. This rom works very well.

[Q] Flashing a Custom Kernel

Hi guys.
I'm attempting to flash the ElementalX-m7-5.2 on my phone which is currently running ARHD 21.0 Sense 5. My base is 3.17.xxx therefore I think everything should be fine. I just wondering what my Kernel version should read after I finish flashing it. From what I can see, it kernel hasn't been successfully flashed. Are there any prerequisites that I have to fulfill before flashing a custom rom?
Cheers.
s3330987 said:
Hi guys.
I'm attempting to flash the ElementalX-m7-5.2 on my phone which is currently running ARHD 21.0 Sense 5. My base is 3.17.xxx therefore I think everything should be fine. I just wondering what my Kernel version should read after I finish flashing it. From what I can see, it kernel hasn't been successfully flashed. Are there any prerequisites that I have to fulfill before flashing a custom rom?
Cheers.
Click to expand...
Click to collapse
Why not?
What's the error? You get it in recovery when you flashed?
Or are you talking about what you can see into settings?
Guich said:
Why not?
What's the error? You get it in recovery when you flashed?
Or are you talking about what you can see into settings?
Click to expand...
Click to collapse
Well it's beyond me really. Well, I have to get into recovery to flash it, so yeah.
Flashing seems to work as there is no error. I restart it twice, just as it requires. I go into my system info to check my kernel version, but nothing seems to have changed. Note, I've attempted to flash this twice now. Maybe, I'll just have to keep trying.
s3330987 said:
Well it's beyond me really. Well, I have to get into recovery to flash it, so yeah.
Flashing seems to work as there is no error. I restart it twice, just as it requires. I go into my system info to check my kernel version, but nothing seems to have changed. Note, I've attempted to flash this twice now. Maybe, I'll just have to keep trying.
Click to expand...
Click to collapse
ElementalX is "[email protected]" under kernel. If it shows that, then you're good.
Sent from my HTC One using xda app-developers app
ilal2ielli said:
ElementalX is "[email protected]" under kernel. If it shows that, then you're good.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Ahhhhh. Super! I guess it worked then. Brilliant. :good:

[Q] HTC Desire C stuck during boot

Hi everyone,
Recently I tried to follow a post from xda dev on putting a new kernel on my HTC Desire C.
Although I followed all the steps I am now unable to get past the boot screen wit the htc logo.
I have tried a number of solutions to make it work but nothing so far, backup recovery failed, changing to another kernel failed.
I think that at this point it might be bricked, and all that I can see is the logo and a disclaimer message.
Does anyone has any idea if I could fix it, and what do I need to do?
Kind regards,
Florin
Edit: thanks to aashay960 for telling me how to fix this.
The solution was to reinstall kernel and rom (since I made a mess of it initially)
Current config : CyanogenMod 10 + N.O.P.E Kernel 875Mhz
sir_florin90 said:
Hi everyone,
Recently I tried to follow a post from xda dev on putting a new kernel on my HTC Desire C.
Although I followed all the steps I am now unable to get past the boot screen wit the htc logo.
I have tried a number of solutions to make it work but nothing so far, backup recovery failed, changing to another kernel failed.
I think that at this point it might be bricked, and all that I can see is the logo and a disclaimer message.
Does anyone has any idea if I could fix it, and what do I need to do?
Kind regards,
Florin
Click to expand...
Click to collapse
Its not bricked. Tell me which kernel you are trying, with which rom? And try flashing a lower frequency kernel.
aashay960 said:
Its not bricked. Tell me which kernel you are trying, with which rom? And try flashing a lower frequency kernel.
Click to expand...
Click to collapse
I tried the Prometheus Kernel for sense linked in your signature with the stock. I got to the HTC logo screen and it got stuck there. It might be that the method I used was wrong.
Would it be possible to use the ones you do? Cyanogem mode and the N.O.P.E Kernel?
Can I install them only with recovery? And is there and "xda approved" method of installing kernels and custom roms?
Thanks,
Florin
Flash a lower frequency Prometheus Sense Kernel from fastboot.
You cannot use nope for sense roms. Nope is for Jellybean roms only.
As of now we have two ways to flash a kernel on this device. One is fastboot, which I personally use. Second is the auto Boot.img flasher that you will find if you search..
For now, tell me what frequency you tried. And try a lower one.
aashay960 said:
Flash a lower frequency Prometheus Sense Kernel from fastboot.
You cannot use nope for sense roms. Nope is for Jellybean roms only.
As of now we have two ways to flash a kernel on this device. One is fastboot, which I personally use. Second is the auto Boot.img flasher that you will find if you search..
For now, tell me what frequency you tried. And try a lower one.
Click to expand...
Click to collapse
Hi, I forgot to mention in the previous one that I initially used the 816 one, and then switched to the lower one 767.
Is it worth it to try a "clean install" as in a new configuration with a new kernel and rom?
No a wipe is not necessary.
Just make sure you do
Fastboot erase cache
Fastboot flash boot boot.img
Try an even lower one.
Now that your bootloader is unlocked. Why not try a custom rom?
aashay960 said:
No a wipe is not necessary.
Just make sure you do
Fastboot erase cache
Fastboot flash boot boot.img
Try an even lower one.
Now that your bootloader is unlocked. Why not try a custom rom?
Click to expand...
Click to collapse
What rom do you have in mind? I was thinking about cyanogen
sir_florin90 said:
What rom do you have in mind? I was thinking about cyanogen
Click to expand...
Click to collapse
Yeah that seems to be the most popular rom around. Been using it for a long time..
You can look at other options too. You can't really go wrong with any...
Just make sure to flash nope kernel with a jb rom.
aashay960 said:
Yeah that seems to be the most popular rom around. Been using it for a long time..
You can look at other options too. You can't really go wrong with any...
Just make sure to flash nope kernel with a jb rom.
Click to expand...
Click to collapse
I have noticed: CyanogenMod 10 + N.O.P.E Kernel 875Mhz.
Is this for you desire C?
Yes that is..
aashay960 said:
Yes that is..
Click to expand...
Click to collapse
Thanks man, the phone is back alive. I was feeling so bad when I realised it might be bricked. Thanks again :d
Pls delete.
wilberfish said:
Pls delete.
Click to expand...
Click to collapse
Why would you ask a thread to be deleted without the consent of the OP
Sorry. My bad, I was referring to my post.
I seem to be having connection problems with the xda app resulting in posts when I thank people and only getting notification of successful posts when I am reading another thread!
Sorry for the confusion I caused.
wilberfish said:
Sorry. My bad, I was referring to my post.
I seem to be having connection problems with the xda app resulting in posts when I thank people and only getting notification of successful posts when I am reading another thread!
Sorry for the confusion I caused.
Click to expand...
Click to collapse
Oh its ok, I didnt get what you said. Some tips if you want someone to disregard your post just put a "Deleted." or "[Deleted]" tag.
OK. Thanks.

Categories

Resources