Database Develop

[Q] SuperCID help? Bricked, S-Off etc

Hi guys, I've looked around for this but have found no answers so far. So I'm looking to unroot my phone, but have had a massive problem when using SuperCID to change my CID to HTC___001 from H3G__001 (Three UK). Instead of changing the CID by using the command, it will say "[SD_ERR] The project doesn't support SD card" Is this because when I used s-off the data was wiped or something similar? Please help the phone is bricked and can access the bootloader and recovery (using TWRP) would it be worth trying to flash a new ROM and try to sort it out? Any help would be welcome and will be thanked for any legitimate suggestion.

People need to stop mixjng up soft bricked and bricked...what fastboot command are you entering?

Sorry, I'm not 100% sure what either one meant, but thanks. The command that is issued is - fastboot oem writecid HTC__001

Anyone else have some ideas? Need to get this fixed quickly! I'm going to try and put a new ROM on it to flash it, and then hopefully I will be able to recover it properly. I have a H3G RUU from the HTCDev portal, but don't know how to put the kernel into a RUU and boot it into the phone, so if someone knows how to do this, it would be greatly appreciated if they could tell me, thank you!

At what point did your phone stop booting (what was the step you took last time it booted)?
Are you using the SuperCID command in fastboot?

JHyde92 said:
Hi guys, I've looked around for this but have found no answers so far. So I'm looking to unroot my phone, but have had a massive problem when using SuperCID to change my CID to HTC___001 from H3G__001 (Three UK). Instead of changing the CID by using the command, it will say "[SD_ERR] The project doesn't support SD card" Is this because when I used s-off the data was wiped or something similar? Please help the phone is bricked and can access the bootloader and recovery (using TWRP) would it be worth trying to flash a new ROM and try to sort it out? Any help would be welcome and will be thanked for any legitimate suggestion.
Click to expand...
Click to collapse
how far does your phone get when booting? Splash screen or nothing at all?

voltigeur said:
how far does your phone get when booting? Splash screen or nothing at all?
Click to expand...
Click to collapse
Ardmanz said:
At what point did your phone stop booting (what was the step you took last time it booted)?
Are you using the SuperCID command in fastboot?
Click to expand...
Click to collapse
I get to bootloader and recovery, however I used to get to Cyanogenmod 10.1 load screen (blue circle) but never got past it. I am looking to unroot my phone and go back to Sense 5. I used fastboot to try SuperCID.

JHyde92 said:
I get to bootloader and recovery, however I used to get to Cyanogenmod 10.1 load screen (blue circle) but never got past it. I am looking to unroot my phone and go back to Sense 5. I used fastboot to try SuperCID.
Click to expand...
Click to collapse
go to fastboot and type this. fastboot oem getvar
and copy what you get to the thread

voltigeur said:
go to fastboot and type this. fastboot oem getvar
and copy what you get to the thread
Click to expand...
Click to collapse
MacBook-Prolatform-tools JHyde$ ./fastboot oem getvar
...
(bootloader) [ERR] Command error !!!

and whindows pc?

JHyde92 said:
MacBook-Prolatform-tools JHyde$ ./fastboot oem getvar
...
(bootloader) [ERR] Command error !!!
Click to expand...
Click to collapse
Are you sure you are in the right section of bootloader??
It has to say "Fastboot USB"
Try to install the proper drivers on a windows system and go into bootloader (Fastboot screen) and run the command...
If you are able to go into recovery and bootloader, then your device is not bricked.

:No-Frost: said:
Are you sure you are in the right section of bootloader??
It has to say "Fastboot USB"
Try to install the proper drivers on a windows system and go into bootloader (Fastboot screen) and run the command...
If you are able to go into recovery and bootloader, then your device is not bricked.
Click to expand...
Click to collapse
Okay I've got onto a Windows computer, I've got the drivers for the HTC One loaded up onto it. Which command would it be to use? Thanks

JHyde92 said:
Okay I've got onto a Windows computer, I've got the drivers for the HTC One loaded up onto it. Which command would it be to use? Thanks
Click to expand...
Click to collapse
u have fastboot and ADB files?
No i have them for u

voltigeur said:
u have fastboot and ADB files?
No i have them for u
Click to expand...
Click to collapse
Now use "fastboot oem getvar"? I have just put TrickDroid 8.0 so I do have access to my phone if I need it. What else will I need to do? Sorry for being a bit of a noob haha

JHyde92 said:
Now use "fastboot oem getvar"? I have just put TrickDroid 8.0 so I do have access to my phone if I need it. What else will I need to do? Sorry for being a bit of a noob haha
Click to expand...
Click to collapse
if you have the system booted into the rom, first you will have to issue the command "adb reboot bootloader". That will take you to the bootloader were you will be able to run the fastboot commands like "fastboot getvar all"
That will give you some information about the device

voltigeur said:
u have fastboot and ADB files?
No i have them for u
Click to expand...
Click to collapse
:No-Frost: said:
if you have the system booted into the rom, first you will have to issue the command "adb reboot bootloader". That will take you to the bootloader were you will be able to run the fastboot commands like "fastboot getvar all"
That will give you some information about the device
Click to expand...
Click to collapse
Thanks mate, this is what I've got.
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.13.3231.27
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.771.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA33VW902453
INFOimei: 354436050499639
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3926mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))

JHyde92 said:
Thanks mate, this is what I've got.
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.13.3231.27
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.771.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA33VW902453
INFOimei: 354436050499639
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3926mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
Click to expand...
Click to collapse
okay
get new unlock token at HTCDEV
Flash CMW recovery
http://forum.xda-developers.com/showthread.php?t=2173863
use this line
fastboot flash recovery recovery-clockwork-6.0.3.2-m7.img
Download your rom here:
http://bugsylawson.com/files/file/1056-m7-cwm-nandroid-backup-cid-h3g-001-128771x/
Flash it whit ADB sideload command
that wil work

Also, I recommend you to upgrade the firmware first... Don't have the link now, but you can check on Android Revolution HD topic. On first post, Mike posted a link from where to get latest firmware, make sure to have the right CID, if not, you should follow the revone instructions to get your device S-OFF (it's extremely easy ), just check on the Original Android Development section
---------- Post added at 01:35 PM ---------- Previous post was at 01:34 PM ----------
By the way, your device is S-ON so you're not gonna be able to change the CID until you get S-OFF

voltigeur said:
okay
get new unlock token at HTCDEV
Flash CMW recovery
http://forum.xda-developers.com/showthread.php?t=2173863
use this line
fastboot flash recovery recovery-clockwork-6.0.3.2-m7.img
Download your rom here:
http://bugsylawson.com/files/file/1056-m7-cwm-nandroid-backup-cid-h3g-001-128771x/
Flash it whit ADB sideload command
that wil work
Click to expand...
Click to collapse
Will I need to S-Off too?

JHyde92 said:
Will I need to S-Off too?
Click to expand...
Click to collapse
Once you have your device unlocked (bootloader unlocked by HTC Developer) you can install custom recovery (make sure to clear the cache from fastboot, can't remember the command now as I have a terrible headache and I'm doing my best trying to remember everything), then you can copy the rom into the SD or sideload the rom and then flash a custom rom...
In order to get SUPER-CID you will require to be S-OFF

[Q] Stuck on HBoot during Unroot

Hello,
Last week I rooted my HTC One and installed the Android Revolution HD ROM. Although I loved it, I needed to get back to stock ROM. I followed a YouTube video to unroot my mobile and now it's stuck on HBoot screen. I've tried various RUU and Recover.zip's but no go. Please help!!
Thank you in advance.
Details:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.707.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT367W901515
(bootloader) imei: 354435054464524
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__038
(bootloader) battery-status: good
(bootloader) battery-voltage: 4014mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) gencheckpt: 0

Which RUU did you try and how did it fail?
Your version-main is they key.

Stuck on HBoot during unrooting - HTC One
BenPope said:
Which RUU did you try and how did it fail?
Your version-main is they key.
Click to expand...
Click to collapse
Hello Ben,
Thank you for writing. I'd like you to know that I'm not very techie... This RUU 'RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16' failed, and these recoveries: 2013-03-30.16.15.27, and a few more. I've been looking for my One's version main (1.29.707.17) and don't seem to have any luck. Thank you for your assistance.
Is there anyway I could downgrade or install a custom ROM? Anything to bring One back to life....
Currently, One is stuck on this screen: **Tampered** **Relocked** **Security Warning*

You'll need twrp recovery to install this backup
http://bugsylawson.com/files/file/1841-m7-twrp-nandroid-backup-cid-htc-044-12970716/

Stuck on HBoot during unrooting - HTC One
BenPope said:
You'll need twrp recovery to install this backup
Started download. Thanks, Ben. Could you point me to a step-by-step article for this recovery please?
Also, when I click 'Recovery', the phone just reboots...
Click to expand...
Click to collapse

Look in the original development section for the twrp recovery thread?
Also try
fastboot erase cache
That should sort your recovery out.

Stuck on HBoot during unrooting - HTC One
BenPope said:
Look in the original development section for the twrp recovery thread?
Also try
fastboot erase cache
That should sort your recovery out.
Click to expand...
Click to collapse
Thank you, Ben. You give me hope!! I had almost given up
I'll try the recover and revert shortly. Thanks again!

Stuck on HBoot during unrooting - HTC One
mirali7 said:
Thank you, Ben. You give me hope!! I had almost given up
I'll try the recover and revert shortly. Thanks again!
Click to expand...
Click to collapse
Ben, bad news. I did a quick read on TWRP and ran these commands. It failed. Since I couldn't find a img file, I used a .win. Please tell if I made a mistake. (new in Android world...)
fastboot.exe erase cache
erasing 'cache'... OKAY [ 0.519s]
finished. total time: 0.520s
fastboot.exe flash recovery system.ext4.win
sending 'recovery' (932728 KB)... OKAY [104.691s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 174.315s

Flashing random files is probably a bad idea. You need stock recovery.

Stuck on HBoot during unrooting - HTC One
BenPope said:
Flashing random files is probably a bad idea. You need stock recovery.
Click to expand...
Click to collapse
How do I perform a stock recovery? Please assist

RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16 is a developer RUU .. Your device MID (PN0711000) and CID (HTC__038) suggest it's an asian device ..
try installing this and update via OTA .. and remember, do not install any RUU other than x.xx.709.x ..

Do s-off and flash the ruu, that will give you full stock
Sent from my HTC One™

Rocker19943 said:
Do s-off and flash the ruu, that will give you full stock
Sent from my HTC One™
Click to expand...
Click to collapse
Rocker, can I do a S-Off when I'm stuck on the **Tampered** **Relocked** **Warning Security** screen? How? Please assist.

mirali7 said:
Rocker, can I do a S-Off when I'm stuck on the **Tampered** **Relocked** **Warning Security** screen? How? Please assist.
Click to expand...
Click to collapse
Thank you, Shahriar. Will try the same and revert

S-off
mirali7 said:
Thank you, Shahriar. Will try the same and revert
Click to expand...
Click to collapse
You need S-off and then need to change your CID to 11111111. That's the super CID and then
you can flash any stock firmware.
CC

I had Warning Security screen, i didnt know the reason of it, but it disappeared after unlocking bootloader again, so now try to unlock it using htcdev binary and your phone will boot up normally! Then do your job, but if you want to lock it again, use revone

Rocker19943 said:
I had Warning Security screen, i didnt know the reason of it, but it disappeared after unlocking bootloader again, so now try to unlock it using htcdev binary and your phone will boot up normally! Then do your job, but if you want to lock it again, use revone
Click to expand...
Click to collapse
Rocker, I'm 2 weeks into Android and I'm unsure of how to unlock using HTC Binary. Can you point me to a helpful article please?

rhtzshahriar, I downloaded the RUU but am unable to run it. The exe just doesn't start up. I've tried double-clicks, from cmd, run-as administrator. Rebooted laptop as well. Please advice

mirali7 said:
rhtzshahriar, I downloaded the RUU but am unable to run it. The exe just doesn't start up. I've tried double-clicks, from cmd, run-as administrator. Rebooted laptop as well. Please advice
Click to expand...
Click to collapse
Hi, I've started to download the following files:
RUU_M7_U_JB_50_hTC_Asia_TW_1.20.709.101_Radio_4A.13.3227.06_10.27.1127.01_release_307831_signed_2_4.exe
PN07IMG_M7_U_JB_50_hTC_Asia_TW_1.29.709.4.zip
Please see the screenshots of my phone. I'm unable to write anything from fastboot. But fastboot can read\detect my phone (fastboot devices). Any assistance is highly appreciated.

cc999 said:
You need S-off and then need to change your CID to 11111111. That's the super CID and then
you can flash any stock firmware.
CC
Click to expand...
Click to collapse
Hi, I'm unable to S-Off the device. When I run adb push revone /data/local/tmp/ - I get "device not found" error. Please assist

4.3 GE back to Stock sense

Hi, i have update my HTC One to GE 4.3. All works fine but now i must return to stock because i prefer sense. The question is, how can i run ruu? I have s off and i chance my cid to HTC__001, my hboot is 1.54, i need to do something else? Tnx for reply!

RockLee91 said:
Hi, i have update my HTC One to GE 4.3. All works fine but now i must return to stock because i prefer sense. The question is, how can i run ruu? I have s off and i chance my cid to HTC__001, my hboot is 1.54, i need to do something else? Tnx for reply!
Click to expand...
Click to collapse
Simply flash a stock RUU which matches the CID or just use fastboot oem writecid 11111111 to be able to flash any RUU.

RockLee91 said:
Hi, i have update my HTC One to GE 4.3. All works fine but now i must return to stock because i prefer sense. The question is, how can i run ruu? I have s off and i chance my cid to HTC__001, my hboot is 1.54, i need to do something else? Tnx for reply!
Click to expand...
Click to collapse
if you have S-Off download any RUU and open the .EXE file on your Windows PC, then follow the instruction

Can i execute a ruu of a lower version? And can i do that with 1.54 hboot? When i try with HTC__001 cid the setup wizard give me error this is the ruu i want to flash. RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
Its the correct One?

I've tried with super cid but the result was the same... Any advice?

RockLee91 said:
I've tried with super cid but the result was the same... Any advice?
Click to expand...
Click to collapse
Try this.
1. Run the RUU and click next but no further
2. Go to your user folder ie C:\Users\Nameofuser\AppData\Local\Temp
3. Search for rom.zip and then copy it to another location on your PC
4. Stop the RUU
5. Reboot your phone into the bootloader
6. Go into fastboot
7. fastboot oem rebootRUU
8. fastboot flash zip rom.zip (will fail the first time)
9. fastboot flash zip rom.zip (should now work)

daleski75 said:
Try this.
1. Run the RUU and click next but no further
2. Go to your user folder ie C:\Users\Nameofuser\AppData\Local\Temp
3. Search for rom.zip and then copy it to another location on your PC
4. Stop the RUU
5. Reboot your phone into the bootloader
6. Go into fastboot
7. fastboot oem rebootRUU
8. fastboot flash zip rom.zip (will fail the first time)
9. fastboot flash zip rom.zip (should now work)
Click to expand...
Click to collapse
The first time i do fastboot the terminal work for a while and then get the failed message, the second time got failed message again without work, it says status read failed (too many links)

RockLee91 said:
The first time i do fastboot the terminal work for a while and then get the failed message, the second time got failed message again without work, it says status read failed (too many links)
Click to expand...
Click to collapse
Did you literally flash everything to get the GE edition as per another thread on the conversion and also did you flash the 4.3 GE hboot?

I flash the zip of the rooted GE 4.3 the same way you told me to do before.
I follow this guide : http://forum.xda-developers.com/showthread.php?t=2358781

RockLee91 said:
I flash the zip of the rooted GE 4.3 the same way you told me to do before
Click to expand...
Click to collapse
can you run fastboot getvar all and post the output here?

INFOversion: 0.5
INFOversion-bootloader: 1.54.0000
INFOversion-baseband: 4A.18.3263.15
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.06.1700.10
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: *************
INFOimei: *************
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3826mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-94cf81a8fd
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.062s

Probably a good idea to remove your IMEI and SERIAL number from your post but anyway...
Try just flashing the stock rom from this thread using CWM or TWRP and then flash the stock recovery back after.
http://forum.xda-developers.com/showthread.php?t=2224752

Done, remove from quote top pls XD

daleski75 said:
Probably a good idea to remove your IMEI and SERIAL number from your post but anyway...
Try just flashing the stock rom from this thread using CWM or TWRP and then flash the stock recovery back after.
http://forum.xda-developers.com/showthread.php?t=2224752
Click to expand...
Click to collapse
how can i get custom recovery on GE 4.3?

RockLee91 said:
how can i get custom recovery on GE 4.3?
Click to expand...
Click to collapse
Flash a custom recovery as normal ie fastboot flash recovery openrecovery.img etc

i have flashed the rom that you linked me but now the phone stuck on boot screen :crying:
any advice?
SOLVED: i've flashed another rom and now work like a charm i flashed android revolution hd 12.1 ^^ tnx for all the support you saved me!

need of minor help (s-off but no root)

So back story goes like this.
Broke screen, got replacement from insurance. Want to put phone back to stock.
Device is currently (relocked and s-off) hboot 1.44
Has no root though, as I used RUU to get back to stock 1.27 on T-Mobile.
I have complete functional adb and fastboot and I'm knowledgeable with them.
Just can't figure out how to get SU pushed to the phone so I can revert bootloaders messages showing (relocked & get s-on) to show a fully stock phone. I know it might not matter with insurance and phone being replaced already and that jazz... Just want to do this for peace of mind, as I'm not trying to pay 600$ to them just in case they flag my phone.
Here is my getvar all
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.531.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT36HW911407
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4268mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.078s

mt3g said:
So back story goes like this.
Broke screen, got replacement from insurance. Want to put phone back to stock.
Device is currently (relocked and s-off) hboot 1.44
Has no root though, as I used RUU to get back to stock 1.27 on T-Mobile.
I have complete functional adb and fastboot and I'm knowledgeable with them.
Just can't figure out how to get SU pushed to the phone so I can revert bootloaders messages showing (relocked & get s-on) to show a fully stock phone. I know it might not matter with insurance and phone being replaced already and that jazz... Just want to do this for peace of mind, as I'm not trying to pay 600$ to them just in case they flag my phone.
Here is my getvar all
C:\adb>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.17.3250.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.27.531.11
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT36HW911407
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4268mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.078s
Click to expand...
Click to collapse
http://www.htc1guru.com/guides/guru-bootloader-reset/
flash this in CWM/TWRP.
Choose locked nd remove Tampered flag. Then, u can send it in

raghav kapur said:
http://www.htc1guru.com/guides/guru-bootloader-reset/
flash this in CWM/TWRP.
Choose locked nd remove Tampered flag. Then, u can send it in
Click to expand...
Click to collapse
Problem is I can't get a custom recovery to stick, flashing recovery in fastboot doesn't work.

mt3g said:
Problem is I can't get a custom recovery to stick, flashing recovery in fastboot doesn't work.
Click to expand...
Click to collapse
Thats because ur bootloader is relocked.
Unlock your bootloader via HTC dev
Then flash the custom recovery and then, the zip file i semt you

raghav kapur said:
Thats because ur bootloader is relocked.
Unlock your bootloader via HTC dev
Then flash the custom recovery and then, the zip file i semt you
Click to expand...
Click to collapse
Currently in that process, thanks.

mt3g said:
Currently in that process, thanks.
Click to expand...
Click to collapse
or with S-OFF you can zip a custom recovery.img in a firmware.zip and flash it via RUU mode even with a locked bootloader.

raghav kapur said:
Thats because ur bootloader is relocked.
Unlock your bootloader via HTC dev
Then flash the custom recovery and then, the zip file i semt you
Click to expand...
Click to collapse
alray said:
or with S-OFF you can zip a custom recovery.img in a firmware.zip and flash it via RUU mode even with a locked bootloader.
Click to expand...
Click to collapse
I'm just laughing at myself over here.
So I have root, I have TRWP installed. I have tried the file from HTC1GURU and it will simply not do anything to my bootloader no tampered removal or locking is being done, no errors are showing though...
I tried using revone its a no go as well, all is fine but get the error-1 after entering ./revone -l any ideas guys? I'm so close but things just are not going my way haha. Thanks for the help .

mt3g said:
I'm just laughing at myself over here.
So I have root, I have TRWP installed. I have tried the file from HTC1GURU and it will simply not do anything to my bootloader no tampered removal or locking is being done, no errors are showing though...
I tried using revone its a no go as well, all is fine but get the error-1 after entering ./revone -l any ideas guys? I'm so close but things just are not going my way haha. Thanks for the help .
Click to expand...
Click to collapse
which twrp version are you using? Crushalot specify to use twrp 2.6.3.3 with his tool. NVM he said at least twrp 2.6.3.3 so higher version should be fine.

alray said:
which twrp version are you using? Crushalot specify to use twrp 2.6.3.3 with his tool. NVM he said at least twrp 2.6.3.3 so higher version should be fine.
Click to expand...
Click to collapse
I'm gonna try 2.7
why wouldn't revone work though?

mt3g said:
I'm gonna try 2.7
why wouldn't revone work though?
Click to expand...
Click to collapse
its been a while since I used revone but I think you must have root for it to work correctly.

alray said:
its been a while since I used revone but I think you must have root for it to work correctly.
Click to expand...
Click to collapse
I hate being an idiot, 2.7 worked. I'm locked going to set s-on and run the RUU and put the phone in its box and take a nap or something lol. Thanks again for the help guys.

mt3g said:
I hate being an idiot, 2.7 worked. I'm locked going to set s-on and run the RUU and put the phone in its box and take a nap or something lol. Thanks again for the help guys.
Click to expand...
Click to collapse
don't forget to remove the tampered flag before! (you probably already did just in case)

alray said:
don't forget to remove the tampered flag before! (you probably already did just in case)
Click to expand...
Click to collapse
aaaaaand I Gotta start over lol.

mt3g said:
aaaaaand I Gotta start over lol.
Click to expand...
Click to collapse
really? :laugh:

alray said:
really? :laugh:
Click to expand...
Click to collapse
Ya no joke... I'm so drained lol. The phone is stuck in bootloader can't boot around it recovery or anything. Guess I'll be here helping people out in the future with my knowledge that I've gained.

now I can't even attain s-off lol... got it unlocked with the ugly tampered warning still up there.
Tried rumrunner, firewater all in one tool kit... should i run the ruu again then attempt to proceed?
Why'd I have to skip the stupid tampered part!!!????

mt3g said:
now I can't even attain s-off lol... got it unlocked with the ugly tampered warning still up there.
Tried rumrunner, firewater all in one tool kit... should i run the ruu again then attempt to proceed?
Why'd I have to skip the stupid tampered part!!!????
Click to expand...
Click to collapse
Bumpin for help puhleasee
Sent from my HTC One using XDA Premium 4 mobile app

mt3g said:
now I can't even attain s-off lol... got it unlocked with the ugly tampered warning still up there.
Tried rumrunner, firewater all in one tool kit... should i run the ruu again then attempt to proceed?
Why'd I have to skip the stupid tampered part!!!????
Click to expand...
Click to collapse
well, you need a working OS to use rumrunner or firewater. It cannot be done in fastboot mode. So, ideally, adb sideload ARHD to ur phone. Flash it. Then run the S-OFF tool of ur choice

raghav kapur said:
well, you need a working OS to use rumrunner or firewater. It cannot be done in fastboot mode. So, ideally, adb sideload ARHD to ur phone. Flash it. Then run the S-OFF tool of ur choice
Click to expand...
Click to collapse
Already have a booted OS with root.
Sent from my HTC One using XDA Premium 4 mobile app

mt3g said:
Already have a booted OS with root.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
use Revone if u have HBOOT 1.44

[Q] Can you help me get S-ON please? HTC One M7

Hello everyone,
I am trying to get S-ON and I cant seem to figure it out, here is a little bit of background information you may need to provide proper help.
------------------------------------------------------------------
Background info:
- HTC One M7
- I have a LOCKED Bootloader
- I have tried "fastboot oem writesecureflag 3" command to try to set S-ON but i got this error: "partitions siganture failed"
- I have stock recovery
------------------------------------------------------------------
If someone can help me it would be greatly appreciated.

slicer812 said:
Hello everyone,
I am trying to get S-ON and I cant seem to figure it out, here is a little bit of background information you may need to provide proper help.
------------------------------------------------------------------
Background info:
- HTC One M7
- I have a LOCKED Bootloader
- I have tried "fastboot oem writesecureflag 3" command to try to set S-ON but i got this error: "partitions siganture failed"
- I have stock recovery
------------------------------------------------------------------
If someone can help me it would be greatly appreciated.
Click to expand...
Click to collapse
post your fastboot getvar all minus serial and IMEI and your bootloader screen

clsA said:
post your fastboot getvar all minus serial and IMEI and your bootloader screen
Click to expand...
Click to collapse
What is "getvar" and also why would you need my IMEI?
Here is a pic of my bootloader.

slicer812 said:
What is "getvar" and also why would you need my IMEI?
Here is a pic of my bootloader.
Click to expand...
Click to collapse
you have a Verizon HTC one ...why would you want s-on ?
it may be impossible to ever s-off again and you'll be stuck with stock
I said Minus your Serial and IMEI

clsA said:
you have a Verizon HTC one ...why would you want s-on ?
it may be impossible to ever s-off again and you'll be stuck with stock
I said Minus your Serial and IMEI
Click to expand...
Click to collapse
The reason I would want S-ON is to update to HTC Sense 6 Verizon does not allow updates to go through with S-OFF, as I was told by HTC, I have tested updating my device it wont work.

slicer812 said:
The reason I would want S-ON is to update to HTC Sense 6 Verizon does not allow updates to go through with S-OFF, as I was told by HTC, I have tested updating my device it wont work.
Click to expand...
Click to collapse
you phone will update with s-off
you need stock recovery
you should be using these forums before you screw up completely
http://forum.xda-developers.com/verizon-htc-one/general

clsA said:
you phone will update with s-off
you need stock recovery
Click to expand...
Click to collapse
I have the stock recovery though. And when i called HTC they said it will only update with S-ON.

slicer812 said:
I have the stock recovery though. And when i called HTC they said it will only update with S-ON.
Click to expand...
Click to collapse
lol, what did you think they would say ...shakes head
go here and do some reading
http://forum.xda-developers.com/verizon-htc-one/general

clsA said:
lol, what did you think they would say ...shakes head
go here and do some reading
http://forum.xda-developers.com/verizon-htc-one/general
Click to expand...
Click to collapse
I have looked up many things like that I just cant figure out what else i need to do I have tried restoring S-On by doing this "fastboot oem writesecureflag 3" then I get this error "partitions siganture failed"
Any suggestions?
And by the way I appreciate all your help.

slicer812 said:
I have looked up many things like that I just cant figure out what else i need to do I have tried restoring S-On by doing this "fastboot oem writesecureflag 3" then I get this error "partitions siganture failed"
Any suggestions?
And by the way I appreciate all your help.
Click to expand...
Click to collapse
regardless of what HTC told you you don't need s-on to take the OTA ...
have you downloaded the OTApkg.zip ?
what stock recovery did you use ?
what is your fastboot getvar all results ? Minus your serial and IMEI

clsA said:
regardless of what HTC told you you don't need s-on to take the OTA ...
have you downloaded the OTApkg.zip ?
what stock recovery did you use ?
what is your fastboot getvar all results ? Minus your serial and IMEI
Click to expand...
Click to collapse
What is "fastboot getvar"? Also where do I get the OTApkg.zip?

slicer812 said:
What is "fastboot getvar"? Also where do I get the OTApkg.zip?
Click to expand...
Click to collapse
fastboot is an app you run from your PC command prompt to flash your phone
fastboot flash recovery recovery.zip is an example
fastboot getvar all outputs the specs for your device
here's mine
C:\fastboot>adb reboot
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000 My phones hboot
(bootloader) version-baseband: 4T.27.3218.14 Radio
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.401.10 < my phones software version
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34 Removed
(bootloader) imei: 354 Removed
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000 My MID
(bootloader) cidnum: CWS__001 My CID
(bootloader) battery-status: good
(bootloader) battery-voltage: 4316mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
C:\fastboot>
Click to expand...
Click to collapse
here's the only RUU I can find for your phone
http://flyhalf205.com/?dir=RUU/m7vzw
you flash them with fastboot
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip << yes two times
fastboot reboot-bootloader
Just make sure you name the RUU rom.zip not rom.zip.zip and it's in the same folder as fastboot
Don't lock your bootloader and Don't go s=on
just flash the PN07IMG_M7_WL_JB_50_VZW_2.10.605.1_DECRYPT.zip
and take all the OTA updates you want .. then flash custom recovery and re- root your phone if you want.

clsA said:
fastboot is an app you run from your PC command prompt to flash your phone
fastboot flash recovery recovery.zip is an example
fastboot getvar all outputs the specs for your device
here's mine
here's the only RUU I can find for your phone
http://flyhalf205.com/?dir=RUU/m7vzw
you flash them with fastboot
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip << yes two times
fastboot reboot-bootloader
Just make sure you name the RUU rom.zip not rom.zip.zip and it's in the same folder as fastboot
Click to expand...
Click to collapse
I used flashify app to flash my recovery but I backed up my stock recovery. My phone is on the stock recovery right now and its been on stock for over a day now. I tried to issue the command "fastboot getvar" but nothing happened and it listed command options. I do not have too much experience with this lol sorry if I'm annoying you.

slicer812 said:
I used flashify app to flash my recovery but I backed up my stock recovery. My phone is on the stock recovery right now and its been on stock for over a day now. I tried to issue the command "fastboot getvar" but nothing happened and it listed command options. I do not have too much experience with this lol sorry if I'm annoying you.
Click to expand...
Click to collapse
pretty much all i can tell you is, everything you need is above in post #12
Flash the RUU and your phone will redownload and install the updates one at a time.
Don't Relock the bootloader
Don'T go S-On !
use this custom recovery when you done taking updates
http://techerrata.com/file/twrp2/m7vzw/openrecovery-twrp-2.7.0.1-m7wlv.img
P.S I'm not Annoyed ..I'm just old and grouchy

clsA said:
pretty much all i can tell you is, everything you need is above in post #12
Flash the RUU and your phone will redownload and install the updates one at a time.
Don't Relock the bootloader
Don'T go S-On !
use this custom recovery when you done taking updates
http://techerrata.com/file/twrp2/m7vzw/openrecovery-twrp-2.7.0.1-m7wlv.img
P.S I'm not Annoyed ..I'm just old and grouchy
Click to expand...
Click to collapse
What if I install the RUU and I cant update my phone? <-- Im not sure if thats even possible. lol
Couldn't I just call verizon and have them push an RUU to my phone? They said they could do that.

elsaltu vers
slicer812 said:
What if I install the RUU and I cant update my phone? <-- Im not sure if thats even possible. lol
Couldn't I just call verizon and have them push an RUU to my phone? They said they could do that.
Click to expand...
Click to collapse
Also, would installing the RUU wipe my phone?

Have somewhat similar problem
have RUU flashed should be completely stock, but can't S-ON
https://www.dropbox.com/s/33jun0xivk0wamt/Screenshot 2014-07-13 00.02.23.png
Heres the getvar all
Btw, does the RUU contains stock recovery?

slicer812 said:
Also, would installing the RUU wipe my phone?
Click to expand...
Click to collapse
Yes RUU wipes everything
Sent from my HTC One_M8 using Tapatalk 4
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
alwinwh said:
Have somewhat similar problem
have RUU flashed should be completely stock, but can't S-ON
https://www.dropbox.com/s/33jun0xivk0wamt/Screenshot 2014-07-13 00.02.23.png
Heres the getvar all
Btw, does the RUU contains stock recovery?
Click to expand...
Click to collapse
Yes RUU is stock everything
Don't go S-on ever!!
Sent from my HTC One_M8 using Tapatalk 4

clsA said:
Yes RUU wipes everything
Sent from my HTC One_M8 using Tapatalk 4
Click to expand...
Click to collapse
What if I install an RUU and I still can't update my phone? Also, couldn't I call Verizon and have them puch an RUU to my phone, they said they can do that?

slicer812 said:
What if I install an RUU and I still can't update my phone? Also, couldn't I call Verizon and have them puch an RUU to my phone, they said they can do that?
Click to expand...
Click to collapse
Just flash the RUU and take the updates
Sent from my HTC One_M8 using Tapatalk 4