Related
Hi guys, I've looked around for this but have found no answers so far. So I'm looking to unroot my phone, but have had a massive problem when using SuperCID to change my CID to HTC___001 from H3G__001 (Three UK). Instead of changing the CID by using the command, it will say "[SD_ERR] The project doesn't support SD card" Is this because when I used s-off the data was wiped or something similar? Please help the phone is bricked and can access the bootloader and recovery (using TWRP) would it be worth trying to flash a new ROM and try to sort it out? Any help would be welcome and will be thanked for any legitimate suggestion.
People need to stop mixjng up soft bricked and bricked...what fastboot command are you entering?
Sorry, I'm not 100% sure what either one meant, but thanks. The command that is issued is - fastboot oem writecid HTC__001
Anyone else have some ideas? Need to get this fixed quickly! I'm going to try and put a new ROM on it to flash it, and then hopefully I will be able to recover it properly. I have a H3G RUU from the HTCDev portal, but don't know how to put the kernel into a RUU and boot it into the phone, so if someone knows how to do this, it would be greatly appreciated if they could tell me, thank you!
At what point did your phone stop booting (what was the step you took last time it booted)?
Are you using the SuperCID command in fastboot?
JHyde92 said:
Hi guys, I've looked around for this but have found no answers so far. So I'm looking to unroot my phone, but have had a massive problem when using SuperCID to change my CID to HTC___001 from H3G__001 (Three UK). Instead of changing the CID by using the command, it will say "[SD_ERR] The project doesn't support SD card" Is this because when I used s-off the data was wiped or something similar? Please help the phone is bricked and can access the bootloader and recovery (using TWRP) would it be worth trying to flash a new ROM and try to sort it out? Any help would be welcome and will be thanked for any legitimate suggestion.
Click to expand...
Click to collapse
how far does your phone get when booting? Splash screen or nothing at all?
voltigeur said:
how far does your phone get when booting? Splash screen or nothing at all?
Click to expand...
Click to collapse
Ardmanz said:
At what point did your phone stop booting (what was the step you took last time it booted)?
Are you using the SuperCID command in fastboot?
Click to expand...
Click to collapse
I get to bootloader and recovery, however I used to get to Cyanogenmod 10.1 load screen (blue circle) but never got past it. I am looking to unroot my phone and go back to Sense 5. I used fastboot to try SuperCID.
JHyde92 said:
I get to bootloader and recovery, however I used to get to Cyanogenmod 10.1 load screen (blue circle) but never got past it. I am looking to unroot my phone and go back to Sense 5. I used fastboot to try SuperCID.
Click to expand...
Click to collapse
go to fastboot and type this. fastboot oem getvar
and copy what you get to the thread
voltigeur said:
go to fastboot and type this. fastboot oem getvar
and copy what you get to the thread
Click to expand...
Click to collapse
MacBook-Prolatform-tools JHyde$ ./fastboot oem getvar
...
(bootloader) [ERR] Command error !!!
and whindows pc?
JHyde92 said:
MacBook-Prolatform-tools JHyde$ ./fastboot oem getvar
...
(bootloader) [ERR] Command error !!!
Click to expand...
Click to collapse
Are you sure you are in the right section of bootloader??
It has to say "Fastboot USB"
Try to install the proper drivers on a windows system and go into bootloader (Fastboot screen) and run the command...
If you are able to go into recovery and bootloader, then your device is not bricked.
:No-Frost: said:
Are you sure you are in the right section of bootloader??
It has to say "Fastboot USB"
Try to install the proper drivers on a windows system and go into bootloader (Fastboot screen) and run the command...
If you are able to go into recovery and bootloader, then your device is not bricked.
Click to expand...
Click to collapse
Okay I've got onto a Windows computer, I've got the drivers for the HTC One loaded up onto it. Which command would it be to use? Thanks
JHyde92 said:
Okay I've got onto a Windows computer, I've got the drivers for the HTC One loaded up onto it. Which command would it be to use? Thanks
Click to expand...
Click to collapse
u have fastboot and ADB files?
No i have them for u
voltigeur said:
u have fastboot and ADB files?
No i have them for u
Click to expand...
Click to collapse
Now use "fastboot oem getvar"? I have just put TrickDroid 8.0 so I do have access to my phone if I need it. What else will I need to do? Sorry for being a bit of a noob haha
JHyde92 said:
Now use "fastboot oem getvar"? I have just put TrickDroid 8.0 so I do have access to my phone if I need it. What else will I need to do? Sorry for being a bit of a noob haha
Click to expand...
Click to collapse
if you have the system booted into the rom, first you will have to issue the command "adb reboot bootloader". That will take you to the bootloader were you will be able to run the fastboot commands like "fastboot getvar all"
That will give you some information about the device
voltigeur said:
u have fastboot and ADB files?
No i have them for u
Click to expand...
Click to collapse
:No-Frost: said:
if you have the system booted into the rom, first you will have to issue the command "adb reboot bootloader". That will take you to the bootloader were you will be able to run the fastboot commands like "fastboot getvar all"
That will give you some information about the device
Click to expand...
Click to collapse
Thanks mate, this is what I've got.
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.13.3231.27
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.771.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA33VW902453
INFOimei: 354436050499639
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3926mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
JHyde92 said:
Thanks mate, this is what I've got.
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.13.3231.27
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.771.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA33VW902453
INFOimei: 354436050499639
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3926mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
Click to expand...
Click to collapse
okay
get new unlock token at HTCDEV
Flash CMW recovery
http://forum.xda-developers.com/showthread.php?t=2173863
use this line
fastboot flash recovery recovery-clockwork-6.0.3.2-m7.img
Download your rom here:
http://bugsylawson.com/files/file/1056-m7-cwm-nandroid-backup-cid-h3g-001-128771x/
Flash it whit ADB sideload command
that wil work
Also, I recommend you to upgrade the firmware first... Don't have the link now, but you can check on Android Revolution HD topic. On first post, Mike posted a link from where to get latest firmware, make sure to have the right CID, if not, you should follow the revone instructions to get your device S-OFF (it's extremely easy ), just check on the Original Android Development section
---------- Post added at 01:35 PM ---------- Previous post was at 01:34 PM ----------
By the way, your device is S-ON so you're not gonna be able to change the CID until you get S-OFF
voltigeur said:
okay
get new unlock token at HTCDEV
Flash CMW recovery
http://forum.xda-developers.com/showthread.php?t=2173863
use this line
fastboot flash recovery recovery-clockwork-6.0.3.2-m7.img
Download your rom here:
http://bugsylawson.com/files/file/1056-m7-cwm-nandroid-backup-cid-h3g-001-128771x/
Flash it whit ADB sideload command
that wil work
Click to expand...
Click to collapse
Will I need to S-Off too?
JHyde92 said:
Will I need to S-Off too?
Click to expand...
Click to collapse
Once you have your device unlocked (bootloader unlocked by HTC Developer) you can install custom recovery (make sure to clear the cache from fastboot, can't remember the command now as I have a terrible headache and I'm doing my best trying to remember everything), then you can copy the rom into the SD or sideload the rom and then flash a custom rom...
In order to get SUPER-CID you will require to be S-OFF
Hi guys! I have a question...
I was thinking about using a RUU to clean install a stock rom on my one...so, I was at htc-dev site and looked at downloads...
I find: the developer edition RUU, android 4.3 (the last one)...ok, this is the classic RUU, I have to execute it when I'm on "fastboot oem rebootRUU", I'm s-off, it wipes everything and I have the stock firmware and rom...and it's ok...have I got to relock the bootloader?
then....I see, just below, a zip file, as big as the RUU one, but is a zip...what is this? is the zip that the RUU flashes, but for a different use, with the raw method, on the terminal?
and, another one...I looked at the google play edition section...and I founded two zips for each version: one "stock ui" and one "framework support files"....ok, what is this?! isn't there a RUU? what if I want to flash a clean google play edition, with full wipe and stock clean firmware? what can I do with these files?
thank you for listening, and sorry for my bad english
throcker said:
Hi guys! I have a question...
I was thinking about using a RUU to clean install a stock rom on my one...so, I was at htc-dev site and looked at downloads...
I find: the developer edition RUU, android 4.3 (the last one)...ok, this is the classic RUU, I have to execute it when I'm on "fastboot oem rebootRUU", I'm s-off, it wipes everything and I have the stock firmware and rom...and it's ok...have I got to relock the bootloader?
then....I see, just below, a zip file, as big as the RUU one, but is a zip...what is this? is the zip that the RUU flashes, but for a different use, with the raw method, on the terminal?
and, another one...I looked at the google play edition section...and I founded two zips for each version: one "stock ui" and one "framework support files"....ok, what is this?! isn't there a RUU? what if I want to flash a clean google play edition, with full wipe and stock clean firmware? what can I do with these files?
thank you for listening, and sorry for my bad english
Click to expand...
Click to collapse
You must have s-off and super cid "11111111" to flash ruu that are not specific to your phone. You do not have to lock your bootloader. Again, you MUST have s-off and super cid! As long as you have those, you can pretty much convert your phone to whichever you want. I always recommend downgrading your hboot to 1.44 before doing this. You need encrypted ruu's to use the "fastboot oem rebootRUU" mode. Remember to flash stock recovery if you want OTA updates. I have never used the .exe files. I converted my att htc one to google edition, then back, then developer, then back. Its really no different than just running roms, but at least you get a new splash screen and bootloader with each.
http://forum.xda-developers.com/showthread.php?t=2358781 This is the google edition conversion link I used my first time converting my phone. if you look at post 2, it shows how to go back to stock "or pretty much any ruu"
an0ther said:
You must have s-off and super cid "11111111" to flash ruu that are not specific to your phone. You do not have to lock your bootloader. Again, you MUST have s-off and super cid! As long as you have those, you can pretty much convert your phone to whichever you want. I always recommend downgrading your hboot to 1.44 before doing this. You need encrypted ruu's to use the "fastboot oem rebootRUU" mode. Remember to flash stock recovery if you want OTA updates. I have never used the .exe files. I converted my att htc one to google edition, then back, then developer, then back. Its really no different than just running roms, but at least you get a new splash screen and bootloader with each.
http://forum.xda-developers.com/showthread.php?t=2358781 This is the google edition conversion link I used my first time converting my phone. if you look at post 2, it shows how to go back to stock "or pretty much any ruu"
Click to expand...
Click to collapse
ok, thanks for your answer, first....
I already tried the conversion, and it worked fine...but that's not what I'm looking for
I was asking how does the official source files work...
delete me
throcker said:
ok, thanks for your answer, first....
I already tried the conversion, and it worked fine...but that's not what I'm looking for
I was asking how does the official source files work...
Click to expand...
Click to collapse
What do you mean 'work'? They are used to put the phone back to a factory state, a hard reset if you will. It means you can always revert back to stock should you want/need to send it in for repair
As for GPe files, they are not for flashing and are source files to make your own software
EddyOS said:
What do you mean 'work'? They are used to put the phone back to a factory state, a hard reset if you will. It means you can always revert back to stock should you want/need to send it in for repair
As for GPe files, they are not for flashing and are source files to make your own software
Click to expand...
Click to collapse
OK that's the answer! GPE files are the source? same for the zip file next the ruu?
No, the RUU and the 1GB ZIP are the same thing but flashed in different ways...
The RUU is your normal, executable program and does everything for you. The ZIP is an RUU but you have to set the phone up to flash it by using fastboot commands. the process is:
1. Connect phone in fastboot mode
2. Run the command 'fastboot oem rebootRUU'
3. Once the phone is at the HTC screen, you run the command 'fastboot flash zip name_of_zip.zip'
4. It will flash the first part and then give an error and you run the same command as above a second time straight away
5. Once the second flash sequence has finished, you the type 'fastboot reboot' and it will reboot the phone and finish the installation
Basic Steps but...
Not worked for me, i downloaded right htcdev rom for my desire c
Waiting for device... is appeared and no way out.
Any Ideas??
EddyOS said:
No, the RUU and the 1GB ZIP are the same thing but flashed in different ways...
The RUU is your normal, executable program and does everything for you. The ZIP is an RUU but you have to set the phone up to flash it by using fastboot commands. the process is:
1. Connect phone in fastboot mode
2. Run the command 'fastboot oem rebootRUU'
3. Once the phone is at the HTC screen, you run the command 'fastboot flash zip name_of_zip.zip'
4. It will flash the first part and then give an error and you run the same command as above a second time straight away
5. Once the second flash sequence has finished, you the type 'fastboot reboot' and it will reboot the phone and finish the installation
Click to expand...
Click to collapse
an0ther said:
You must have s-off and super cid "11111111" to flash ruu that are not specific to your phone. You do not have to lock your bootloader. Again, you MUST have s-off and super cid! As long as you have those, you can pretty much convert your phone to whichever you want. I always recommend downgrading your hboot to 1.44 before doing this. You need encrypted ruu's to use the "fastboot oem rebootRUU" mode. Remember to flash stock recovery if you want OTA updates. I have never used the .exe files. I converted my att htc one to google edition, then back, then developer, then back. Its really no different than just running roms, but at least you get a new splash screen and bootloader with each.
http://forum.xda-developers.com/showthread.php?t=2358781 This is the google edition conversion link I used my first time converting my phone. if you look at post 2, it shows how to go back to stock "or pretty much any ruu"
Click to expand...
Click to collapse
Hey, sorry for bothering you, i am trying to revert my Htc desire 510 to stock, i do not have a backup. I found files on the htcdev.com and thought they were Roms (easy catch). Unfortunately they are not. I dont even know what to do with these files inorder to get my rom in place. pleace help me.
Zubagy said:
Hey, sorry for bothering you, i am trying to revert my Htc desire 510 to stock, i do not have a backup. I found files on the htcdev.com and thought they were Roms (easy catch). Unfortunately they are not. I dont even know what to do with these files inorder to get my rom in place. pleace help me.
Click to expand...
Click to collapse
There are no more RUU on htcdev.com, these files are kernel source code and not useful to restore your phone. Can you post the output of "fastboot getvar all" (hide your IMEI and serialno), I'll check if I can find something for you.
alray said:
There are no more RUU on htcdev.com, these files are kernel source code and not useful to restore your phone. Can you post the output of "fastboot getvar all" (hide your IMEI and serialno), I'll check if I can find something for you.
Click to expand...
Click to collapse
Thank you for your response. This is what i get
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: 01.02.012_U10251_39.08.40922
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: xxxx
INFOimei: xxxx
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: a11_ul
INFOplatform: hTCBmsm8916
INFOmodelid: 0PCV20000
INFOcidnum: VODAP001
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 295e1798
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOmfg-name: 1001
all: Done!
Zubagy said:
Thank you for your response. This is what i get
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: 01.02.012_U10251_39.08.40922
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: xxxx
INFOimei: xxxx
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: a11_ul
INFOplatform: hTCBmsm8916
INFOmodelid: 0PCV20000
INFOcidnum: VODAP001
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 295e1798
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOmfg-name: 1001
all: Done!
Click to expand...
Click to collapse
There are 3 RUU for Vodafone UK's Desire 510:
1.51.161.10
1.51.161.11
1.51.161.12
Unfortunately these files are only available from a paid site (ir-file)
Not sure which one you'll need since your version-main is blank
Here are the files name just in case you can find elsewhere than ir-file:
0PCVIMG_A11_UL_K443_DESIRE_SENSE60_Vodafone_UK_1.51.161.10_Radio_01.02.012_U10251_39.08.40922_release_416938_signed.zip
0PCVIMG_A11_UL_K443_DESIRE_SENSE60_Vodafone_UK_1.51.161.11_Radio_01.02.012_U10251_39.08.40922_release_427262_signed.zip
0PCVIMG_A11_UL_K443_DESIRE_SENSE60_Vodafone_UK_1.51.161.12_Radio_01.02.012_U10251_39.08.40922_release_450233_combined_signed.zip
alray said:
There are 3 RUU for Vodafone UK's Desire 510:
1.51.161.10
1.51.161.11
1.51.161.12
Unfortunately these files are only available from a paid site (ir-file)
Not sure which one you'll need since your version-main is blank
Here are the files name just in case you can find elsewhere than ir-file:
0PCVIMG_A11_UL_K443_DESIRE_SENSE60_Vodafone_UK_1.51.161.10_Radio_01.02.012_U10251_39.08.40922_release_416938_signed.zip
0PCVIMG_A11_UL_K443_DESIRE_SENSE60_Vodafone_UK_1.51.161.11_Radio_01.02.012_U10251_39.08.40922_release_427262_signed.zip
0PCVIMG_A11_UL_K443_DESIRE_SENSE60_Vodafone_UK_1.51.161.12_Radio_01.02.012_U10251_39.08.40922_release_450233_combined_signed.zip
Click to expand...
Click to collapse
Thankyou for your help, ill get started on looking for them. does this work, found it but still have my doubts... not yet downloaded it.
https://www.dropbox.com/s/cp3hif7sg...51_39.08.40922_release_398419_signed.rar?dl=0
Zubagy said:
Thankyou for your help, ill get started on looking for them. does this work, found it but still have my doubts... not yet downloaded it.
https://www.dropbox.com/s/cp3hif7sg...51_39.08.40922_release_398419_signed.rar?dl=0
Click to expand...
Click to collapse
no, your phone is S-ON and branded to vodafone UK so you can only use RUU for vodafone UK (x.xx.161.x).
1.51.401.1 is for HTC Europe WWE not vodafone.
alray said:
no, your phone is S-ON and branded to vodafone UK so you can only use RUU for vodafone UK (x.xx.161.x).
1.51.401.1 is for HTC Europe WWE not vodafone.
Click to expand...
Click to collapse
A developer sent me this link, looks like it is The ONE. But it looks a lower version than the ones that u mentioned above.
https://mega.nz/#!d4ZknKYT!ZhCHoiBSNJl3pBO_G-uv518ssNrGDY6UPH4EpqZ7qog
Zubagy said:
A developer sent me this link, looks like it is The ONE. But it looks a lower version than the ones that u mentioned above.
https://mega.nz/#!d4ZknKYT!ZhCHoiBSNJl3pBO_G-uv518ssNrGDY6UPH4EpqZ7qog
Click to expand...
Click to collapse
I would try this one
alray said:
I would try this one
Click to expand...
Click to collapse
Oh, ok, then let me get started with it. By the way, do u happen to know where i can also pick any custom ROMs for the 64bit, i checked out the cm12, but its gat bugs
Zubagy said:
Oh, ok, then let me get started with it. By the way, do u happen to know where i can also pick any custom ROMs for the 64bit, i checked out the cm12, but its gat bugs
Click to expand...
Click to collapse
not sure for x64 but everything should be here: http://forum.xda-developers.com/desire-510
Hi!
Can someone help me step by step to get back to a complete stock HTC One
I have flashed Guru Reset RUU M7 3.6, but want to go back to complete stock via OTA.
So I want to go back to 2.2.1 and trough OTA back to 2.3.
Or maybe you can help my with a other way to get back to complete stock.
This is my getvar:
INFOversion: 0.5
INFOversion-bootloader: 1.55.0000
INFOversion-baseband: 4A.21.3263.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.62.401.1
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: SH0000000000
INFOimei: 0000000000000
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: CWS__001
INFObattery-status: good
INFObattery-voltage: 3996mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-bb768ae1
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Ronnymes said:
Hi!
Can someone help me step by step to get back to a complete stock HTC One
I have flashed Guru Reset RUU M7 3.6, but want to go back to complete stock via OTA.
So I want to go back to 2.2.1 and trough OTA back to 2.3.
Or maybe you can help my with a other way to get back to complete stock.
This is my getvar:
INFOversion-bootloader: 1.55.0000
INFOversion-main: 3.62.401.1
INFOversion-misc: PVT SHIP S-OFF
INFOproduct: m7_ul
INFOmodelid: PN0710000
INFOcidnum: CWS__001
all: Done!
Click to expand...
Click to collapse
OK, I need some more information please: did you change MID or CID at any point? cause yours don't make much sense:
1- you're from Holland (ie Europe)
2- you have CID CWS__001, which is ATT US if i'm not mistaken
what do you want your phone to be? European unbranded?
nkk71 said:
OK, I need some more information please: did you change MID or CID at any point? cause yours don't make much sense:
1- you're from Holland (ie Europe)
2- you have CID CWS__001, which is ATT US if i'm not mistaken
what do you want your phone to be? European unbranded?
Click to expand...
Click to collapse
Never changed the MID or CID, just flashed Guru_Reset_M7_3.62.401.1
I am from Holland, correct!
And yes I want a European unbranded and locked and S-on HTC One, complete stock.
Ronnymes said:
Never changed the MID or CID
I am from Holland, correct!
Where can i find my cid?
And yes I want a European unbranded and locked and S-on HTC One, complete stock.
Click to expand...
Click to collapse
your CID was in getvar: "cidnum: CWS__001"
this means the phone was (unless someone changed it ATT US edition), anyway:
European unbranded: easy enough with s-off:
Holland should be CID: HTC__E11
so first thing, in bootloader/FASTBOOT USB, change your CID:
fastboot oem writecid HTC__E11 (two underscores)
fastboot reboot-bootloader
-> and confirm CID is HTC__E11
then follow my guide POST 1 and POST 2, and you're done. (http://forum.xda-developers.com/showthread.php?t=2541082)
use this RUU.EXE: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
hit thanks if i've helped let me know if you need more help
nkk71 said:
your CID was in getvar: "cidnum: CWS__001"
this means the phone was (unless someone changed it ATT US edition), anyway:
European unbranded: easy enough with s-off:
Holland should be CID: HTC__E11
so first thing, in bootloader/FASTBOOT USB, change your CID:
fastboot oem writecid HTC__E11 (two underscores)
fastboot reboot-bootloader
-> and confirm CID is HTC__E11
then follow my guide POST 1 and POST 2, and you're done. (http://forum.xda-developers.com/showthread.php?t=2541082)
use this RUU.EXE: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
hit thanks if i've helped let me know if you need more help
Click to expand...
Click to collapse
Oke, just changed my CID to HTC__11
Downloading the RUU
:highfive:
Ronnymes said:
Oke, just changed my CID to HTC__11
Downloading the RUU
:highfive:
Click to expand...
Click to collapse
HTC__E11 not HTC__11
CID has to be exactly 8 characters!!!!!
please confirm!
EDIT: follow the guide exactly as described, 1 then 2 then 3 etc.
nkk71 said:
HTC__E11 not HTC__11
CID has to be exactly 8 characters!!!!!
please confirm!
EDIT: follow the guide exactly as described, 1 then 2 then 3 etc.
Click to expand...
Click to collapse
My bad, it's E11
Download is ready.. RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
So now I have the flash this RUU?
And than:
Step 1: let's get rid of TAMPERED (if it's there) and set you back to LOCKED (not relocked)
In bootloader/FASTBOOT USB, boot to CWM recovery:
fastboot boot CWM.img
Ronnymes said:
My bad, it's E11
Download is ready.. RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
So now I have the flash this RUU?
And than:
Step 1: let's get rid of TAMPERED (if it's there) and set you back to LOCKED (not relocked)
In bootloader/FASTBOOT USB, boot to CWM recovery:
fastboot boot CWM.img
Click to expand...
Click to collapse
No, please do number 1, then number 2, then number 3
NOT, RUU, then number 1. RUU is number 2 on the list
nkk71 said:
No, please do number 1, then number 2, then number 3
NOT, RUU, then number 1. RUU is number 2 on the list
Click to expand...
Click to collapse
I think I am stuppid, can't see the first step...
I don't have to downgrade to 1.44 so first thing is downloading CMW?
Touch - http://flyhalf205.com/recoveries/rec...0.4.5-m7ul.img
And downloading Guru Bootloader Reset 1.0
Ronnymes said:
I think I am stuppid, can't see the first step...
I don't have to downgrade to 1.44 so first thing is downloading CMW?
Touch - http://flyhalf205.com/recoveries/rec...0.4.5-m7ul.img
And downloading Guru Bootloader Reset 1.0
Click to expand...
Click to collapse
If you’re on hboot which is above 1.44, then first thing is to downgrade that:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
Common downloads for all methods:
download CWM from here: http://forum.xda-developers.com/showthread.php?t=2173863
rename the file to CWM.img (careful about .img.img in Windows)
download Guru Bootloader Reset from here: http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/ (this is the thread http://forum.xda-developers.com/showthread.php?t=2527194)
Then post #2 of my guide for RUU.EXE: http://forum.xda-developers.com/showpost.php?p=47794190&postcount=2
nkk71 said:
If you’re on hboot which is above 1.44, then first thing is to downgrade that:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
Common downloads for all methods:
download CWM from here: http://forum.xda-developers.com/showthread.php?t=2173863
rename the file to CWM.img (careful about .img.img in Windows)
download Guru Bootloader Reset from here: http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/ (this is the thread http://forum.xda-developers.com/showthread.php?t=2527194)
Then post #2 of my guide for RUU.EXE: http://forum.xda-developers.com/showpost.php?p=47794190&postcount=2
Click to expand...
Click to collapse
Yes, it's hboot 1.44 now,
Ronnymes said:
Yes, it's hboot 1.44 now,
Click to expand...
Click to collapse
okay, now follow post #2 for RUU.EXE
nkk71 said:
okay, now follow post #2 for RUU.EXE
Click to expand...
Click to collapse
Flashing recovery first: [RECOVERY] ClockworkMod Touch v6.0.4.5
Ronnymes said:
Flashing recovery first: [RECOVERY] ClockworkMod Touch v6.0.4.5
Click to expand...
Click to collapse
not FLASH, boot:
fastboot boot CWM.img
EDIT: won't matter in step 2 you're gonna run the RUU.EXE so flash or boot is OK
nkk71 said:
not FLASH, boot:
fastboot boot CWM.img
EDIT: won't matter in step 2 you're gonna run the RUU.EXE so flash or boot is OK
Click to expand...
Click to collapse
Did't flash
c:\mini-sdk>fastboot boot CWM.img
cannot load 'CWM.img': No error
c:\mini-sdk>
Ronnymes said:
Did't flash
c:\mini-sdk>fastboot boot CWM.img
cannot load 'CWM.img': No error
c:\mini-sdk>
Click to expand...
Click to collapse
FAQ:
hopefully none, but I'll add them if any come up
1) fastboot is giving me "cannot load": the filename is wrong
Click to expand...
Click to collapse
cannot load means the filename is wrong
nkk71 said:
cannot load means the filename is wrong
Click to expand...
Click to collapse
Yeah I know, but it's copy paste...
Yes it's working now
Ronnymes said:
Yeah I know, but it's copy paste...
Click to expand...
Click to collapse
well how about
download CWM from here: http://forum.xda-developers.com/show....php?t=2173863
rename the file to CWM.img (careful about .img.img in Windows)
Click to expand...
Click to collapse
Hit the thanks button if i'm helping
nkk71 said:
well how about
Hit the thanks button if i'm helping
Click to expand...
Click to collapse
It's flashing now, thnx for your great help!
Ronnymes said:
It's flashing now, thnx for your great help!
Click to expand...
Click to collapse
no problem, if everything OK afterwards, edit your main thread title to include [SOLVED]
otherwise let me know
and if you don't mind hitting the thanks button on my guide
I'm on ARHD 31.6 which is Android 4.3.
Would like to be KitKat.
Can I get to the T-Mo OTA from here somehow, or am I better off with:
http://www.htc1guru.com/dld/ruu-zip...157-04_release_336982_signed_2_decrypted-zip/
metropical said:
I'm on ARHD 31.6 which is Android 4.3.
Would like to be KitKat.
Can I get to the T-Mo OTA from here somehow, or am I better off with:
http://www.htc1guru.com/dld/ruu-zip...157-04_release_336982_signed_2_decrypted-zip/
Click to expand...
Click to collapse
To update my One (that is S-OFF), I relocked the bootloader and loaded that RUU which put it on 4.3, then let it do the OTAs that brought it first to 4.4.2/Sense 5.5, then the OTA to 4.4.2/Sense 6.0. Then I re-unlocked and rooted it. I run the stock T-Mobile ROM that is rooted and using the ElementalX 14.2 kernel.
Fuzi0719 said:
To update my One (that is S-OFF), I relocked the bootloader and loaded that RUU which put it on 4.3, then let it do the OTAs that brought it first to 4.4.2/Sense 5.5, then the OTA to 4.4.2/Sense 6.0. Then I re-unlocked and rooted it. I run the stock T-Mobile ROM that is rooted and using the ElementalX 14.2 kernel.
Click to expand...
Click to collapse
may I ask you why you have re-locked and re-unlocked bootlader?
Fuzi0719 said:
To update my One (that is S-OFF), I relocked the bootloader and loaded that RUU which put it on 4.3, then let it do the OTAs that brought it first to 4.4.2/Sense 5.5, then the OTA to 4.4.2/Sense 6.0. Then I re-unlocked and rooted it. I run the stock T-Mobile ROM that is rooted and using the ElementalX 14.2 kernel.
Click to expand...
Click to collapse
K, Darn the Luck ! ! !
I'm looking to run the same as you actually.
metropical said:
K, Darn the Luck ! ! !
I'm looking to run the same as you actually.
Click to expand...
Click to collapse
you can use that zip or a RUU exe file available there htc1guru but you need tell your getvar all without imei
If your firmware version is lower than this ruu zip then you can flash it with S On if higher you need S off
So tell us getvar all
from HTC One
getvar all
yatindroid said:
you can use that zip or a RUU exe file available there htc1guru but you need tell your getvar all without imei
If your firmware version is lower than this ruu zip then you can flash it with S On if higher you need S off
So tell us getvar all
from HTC One
Click to expand...
Click to collapse
would I need to lock the bootloader again?
Martin:~ fritz$ fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.03
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.24.531.3
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0713000
(bootloader) cidnum: T-MOB010
(bootloader) battery-status: good
(bootloader) battery-voltage: 4182mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-412e361e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all:
You are on 3.24.531.3 so you can flash that zip even with S On
Your phone S off that's very good so go ahead flash it
from HTC One
yatindroid said:
You are on 3.24.531.3 so you can flash that zip even with S On
Your phone S off that's very good so go ahead flash it
Click to expand...
Click to collapse
flashing zip fails, nearly instantly
Fuzi0719 said:
To update my One (that is S-OFF), I relocked the bootloader and loaded that RUU which put it on 4.3, then let it do the OTAs that brought it first to 4.4.2/Sense 5.5, then the OTA to 4.4.2/Sense 6.0. Then I re-unlocked and rooted it. I run the stock T-Mobile ROM that is rooted and using the ElementalX 14.2 kernel.
Click to expand...
Click to collapse
I relocked and tried the HTC1guru RUU for 3.24.531.3 (T-MOB010)
failed.
metropical said:
I relocked and tried the HTC1guru RUU for 3.24.531.3 (T-MOB010)
failed.
Click to expand...
Click to collapse
no need to relock when you're s-off.
can you copy/paste command prompt/terminal output of the commands you ran.
PS: did you check MD5 of the download?
nkk71 said:
no need to relock when you're s-off.
can you copy/paste command prompt/terminal output of the commands you ran.
PS: did you check MD5 of the download?
Click to expand...
Click to collapse
I thought not, but I tried the relock when the zip wouldn't flash.
hmmm, there's an issue with the MD5, so I'm dl'g again from htc1guru.
30 mins left to dl. I'll report back if the md5 is correct this time
metropical said:
flashing zip fails, nearly instantly
Click to expand...
Click to collapse
flashing zip fail means some stock apps missing data/preload apps
from HTC One
now the md5 is right but using TWRP 2.6.3.3 to flash fails.
??
is there some reason I'd have to adb or fastboot rather than TWRP to flash this RUU?
metropical said:
now the md5 is right but using TWRP 2.6.3.3 to flash fails.
??
Click to expand...
Click to collapse
flash in fastboot not in twrp
Put zip in fastboot folder in computer
Command fastboot oem rebootRUU
fastboot flash zip xxxxx.zip
fastboot flash zip xxxxx.zip
fastboot reboot oem
xxxx is zip file name
You have to flash it 2 times that's why flash zip command 2 times
from HTC One
yatindroid said:
flash in fastboot not in twrp
Put zip in fastboot folder in computer
Command fastboot oem rebootRUU
fastboot flash zip xxxxx.zip
fastboot flash zip xxxxx.zip
fastboot reboot oem
xxxx is zip file name
You have to flash it 2 times that's why flash zip command 2 times
from HTC One
Click to expand...
Click to collapse
just realized this, doh!
metropical said:
just realized this, doh!
Click to expand...
Click to collapse
after flashing zip fastboot reboot-bootloader will complete last step of flashing after that reboot oem
from HTC One
yatindroid said:
after flashing zip fastboot reboot-bootloader will complete last step of flashing after that reboot oem
from HTC One
Click to expand...
Click to collapse
done
back to OEM and OTA updating to KK.
Thanks,
alray said:
may I ask you why you have re-locked and re-unlocked bootlader?
Click to expand...
Click to collapse
I've never gotten an RUU to work while the bootloader is unlocked, on any HTC phone I've had. Relocking the bootloader the RUU works as designed. Also, the OTA updates from T-Mobile will not install with an unlocked bootloader.
Fuzi0719 said:
I've never gotten an RUU to work while the bootloader is unlocked, on any HTC phone I've had. Relocking the bootloader the RUU works as designed. Also, the OTA updates from T-Mobile will not install with an unlocked bootloader.
Click to expand...
Click to collapse
apparently the RUU will install, but alas I'm between unlocked and locked.
oh boy
had to relock, then unlock.
flash TWRP and SuperSU
seems to be ok now.
metropical said:
apparently the RUU will install, but alas I'm between unlocked and locked.
oh boy
Click to expand...
Click to collapse
try with unlocked if not then lock & try
Flashing will not lock your phone
from HTC One
Hello,
I've changed the ROM on my HTC One and I want to go back to stock ROM.
Current device status:
- ROOTED
- S-OFF
- SUPERCID
- TWM RECOVERY
- CyanogenMod ROM
I'm not bothered about returning to 100% stock I just want the stock ROM back. My handset was locked to VODAFONE UK (CID VODAP001)
morgan150 said:
Hello,
I've changed the ROM on my HTC One and I want to go back to stock ROM.
Current device status:
- ROOTED
- S-OFF
- SUPERCID
- TWM RECOVERY
- CyanogenMod ROM
I'm not bothered about returning to 100% stock I just want the stock ROM back. My handset was locked to VODAFONE UK (CID VODAP001)
Click to expand...
Click to collapse
your phone is s-off which mean you can use every RUU out there. JUst change your CID/MID if required before running the ruu. If you dont want to use a ruu, you can flash a stock guru reset rom or stock odexed rom that match your firmware version.
alray said:
your phone is s-off which mean you can use every RUU out there. JUst change your CID/MID if required before running the ruu. If you dont want to use a ruu, you can flash a stock guru reset rom or stock odexed rom that match your firmware version.
Click to expand...
Click to collapse
So all I do is change the CID back and then use RUU or reflash? How do I know what firmware I'm using?
Can I use this to go back stock after changing my CID back...
http://www.htc1guru.com/dld/ota_m7_...uk_5-16-161-2-4-19-161-11_release_379920-zip/
morgan150 said:
How do I know what firmware I'm using?
Click to expand...
Click to collapse
post the output of "fastoot getvar all" except your imei and serialno
---------- Post added at 12:15 PM ---------- Previous post was at 12:14 PM ----------
morgan150 said:
Can I use this to go back stock after changing my CID back...
http://www.htc1guru.com/dld/ota_m7_...uk_5-16-161-2-4-19-161-11_release_379920-zip/
Click to expand...
Click to collapse
no this is an ota file you can not use this to restore your phone, its only a patch.
alray said:
post the output of "fastoot getvar all" except your imei and serialno
---------- Post added at 12:15 PM ---------- Previous post was at 12:14 PM ----------
no this is an ota file you can not use this to restore your phone, its only a patch.
Click to expand...
Click to collapse
I will post it as soon as I'm home from work. Thank you!
Can I get that information without using a PC?
Sent from my One using XDA Free mobile app
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.161.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3774mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
Can anyone tell me the RUU or ROM I need please...
morgan150 said:
Can anyone tell me the RUU or ROM I need please...
Click to expand...
Click to collapse
A couple of questions, first:
Why (it helps to know what your ultimate goal is)
Do you need to go back to Vodafone or are you OK with unbranded
Do you intend on going S-ON
nkk71 said:
A couple of questions, first:
Why (it helps to know what your ultimate goal is)
Do you need to go back to Vodafone or are you OK with unbranded
Do you intend on going S-ON
Click to expand...
Click to collapse
Thank you so much for getting back to me!
1. Because I've installed loads of ROMS and not one I like or they intend to freeze etc
2. I'm more then happy to go back unbranded as long as I can still get OTA updates
3. Nope
morgan150 said:
Thank you so much for getting back to me!
1. Because I've installed loads of ROMS and not one I like or they intend to freeze etc
2. I'm more then happy to go back unbranded as long as I can still get OTA updates
3. Nope
Click to expand...
Click to collapse
hmm, I haven't had problems with most ROMs I've tried, but to each his own
change CID to international WWE unbranded:
fastboot oem writecid HTC__001 <- two underscores (CID is exactly 8 chars)
fastboot reboot-bootloader
fastboot oem readcid
^^ confirm it now says HTC__001
then you run RUU:
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
let me know if you have problems with that ruu, in which case you'd need to first downgrade your firmware.
I have a decrypted 1.28 version, that would flash pretty easily, but then you'd have to take a lot more OTA's... if that doesn't bother you let me know and i'll link instructions to it.
Anyway, i'll decrypt the 4.19 version and upload, but that's gonna take more than a few hours to upload.
PS: the RUU, will obviously wipe EVERYTHING off your phone, so backup to PC first, and yes, OTAs will be fine even with unlocked bootloader
nkk71 said:
hmm, I haven't had problems with most ROMs I've tried, but to each his own
change CID to international WWE unbranded:
fastboot oem writecid HTC__001 <- two underscores (CID is exactly 8 chars)
fastboot reboot-bootloader
fastboot oem readcid
^^ confirm it now says HTC__001
then you run RUU:
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
let me know if you have problems with that ruu, in which case you'd need to first downgrade your firmware.
I have a decrypted 1.28 version, that would flash pretty easily, but then you'd have to take a lot more OTA's... if that doesn't bother you let me know and i'll link instructions to it.
Anyway, i'll decrypt the 4.19 version and upload, but that's gonna take more than a few hours to upload.
PS: the RUU, will obviously wipe EVERYTHING off your phone, so backup to PC first, and yes, OTAs will be fine even with unlocked bootloader
Click to expand...
Click to collapse
Thanks a lot! I'll give it a go now and let you know
morgan150 said:
Thanks a lot! I'll give it a go now and let you know
Click to expand...
Click to collapse
there's also a mirror here: http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
in either case check MD5 on the download
nkk71 said:
there's also a mirror here: http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
in either case check MD5 on the download
Click to expand...
Click to collapse
Is that one the same?
morgan150 said:
Is that one the same?
Click to expand...
Click to collapse
yes same same, just two different locations, the file is exactly the same
just a question of which one gives you better download speed... i use a download manager in either case
nkk71 said:
yes same same, just two different locations, the file is exactly the same
just a question of which one gives you better download speed... i use a download manager in either case
Click to expand...
Click to collapse
The fastboot_HTC.exe stopped working
morgan150 said:
The fastboot_HTC.exe stopped working
Click to expand...
Click to collapse
download this: http://www.androidfilehost.com/?fid=23329332407574077
Code:
[B]fastboot oem rebootRUU
fastboot flash zip fw_4.19.401.9_custom.zip[/B]
^^ FAILED (remote: 90 hboot pre-update! please flush image again immediately)
... wait a few seconds
[B]fastboot flash zip fw_4.19.401.9_custom.zip[/B]
^^ yes the flash zip has to be done TWICE !!
[B]fastboot reboot-bootloader[/B]
then try ruu again... what OS are you using?
hmm, really need to get that decrypted version uploaded
nkk71 said:
download this: http://www.androidfilehost.com/?fid=23329332407574077
Code:
[B]fastboot oem rebootRUU
fastboot flash zip fw_4.19.401.9_custom.zip[/B]
^^ FAILED (remote: 90 hboot pre-update! please flush image again immediately)
... wait a few seconds
[B]fastboot flash zip fw_4.19.401.9_custom.zip[/B]
^^ yes the flash zip has to be done TWICE !!
[B]fastboot reboot-bootloader[/B]
then try ruu again... what OS are you using?
hmm, really need to get that decrypted version uploaded
Click to expand...
Click to collapse
Just flashed the firmware and now running RUU, and Windows 8.1 Pro
morgan150 said:
Just flashed the firmware and now running RUU, and Windows 8.1 Pro
Click to expand...
Click to collapse
cool, hope it works fine now, cause the old 1.xx RUUs won't work with Win8.1... so i'm glad i didnt link that to you