Hi guys, I've looked around for this but have found no answers so far. So I'm looking to unroot my phone, but have had a massive problem when using SuperCID to change my CID to HTC___001 from H3G__001 (Three UK). Instead of changing the CID by using the command, it will say "[SD_ERR] The project doesn't support SD card" Is this because when I used s-off the data was wiped or something similar? Please help the phone is bricked and can access the bootloader and recovery (using TWRP) would it be worth trying to flash a new ROM and try to sort it out? Any help would be welcome and will be thanked for any legitimate suggestion.
People need to stop mixjng up soft bricked and bricked...what fastboot command are you entering?
Sorry, I'm not 100% sure what either one meant, but thanks. The command that is issued is - fastboot oem writecid HTC__001
Anyone else have some ideas? Need to get this fixed quickly! I'm going to try and put a new ROM on it to flash it, and then hopefully I will be able to recover it properly. I have a H3G RUU from the HTCDev portal, but don't know how to put the kernel into a RUU and boot it into the phone, so if someone knows how to do this, it would be greatly appreciated if they could tell me, thank you!
At what point did your phone stop booting (what was the step you took last time it booted)?
Are you using the SuperCID command in fastboot?
JHyde92 said:
Hi guys, I've looked around for this but have found no answers so far. So I'm looking to unroot my phone, but have had a massive problem when using SuperCID to change my CID to HTC___001 from H3G__001 (Three UK). Instead of changing the CID by using the command, it will say "[SD_ERR] The project doesn't support SD card" Is this because when I used s-off the data was wiped or something similar? Please help the phone is bricked and can access the bootloader and recovery (using TWRP) would it be worth trying to flash a new ROM and try to sort it out? Any help would be welcome and will be thanked for any legitimate suggestion.
Click to expand...
Click to collapse
how far does your phone get when booting? Splash screen or nothing at all?
voltigeur said:
how far does your phone get when booting? Splash screen or nothing at all?
Click to expand...
Click to collapse
Ardmanz said:
At what point did your phone stop booting (what was the step you took last time it booted)?
Are you using the SuperCID command in fastboot?
Click to expand...
Click to collapse
I get to bootloader and recovery, however I used to get to Cyanogenmod 10.1 load screen (blue circle) but never got past it. I am looking to unroot my phone and go back to Sense 5. I used fastboot to try SuperCID.
JHyde92 said:
I get to bootloader and recovery, however I used to get to Cyanogenmod 10.1 load screen (blue circle) but never got past it. I am looking to unroot my phone and go back to Sense 5. I used fastboot to try SuperCID.
Click to expand...
Click to collapse
go to fastboot and type this. fastboot oem getvar
and copy what you get to the thread
voltigeur said:
go to fastboot and type this. fastboot oem getvar
and copy what you get to the thread
Click to expand...
Click to collapse
MacBook-Prolatform-tools JHyde$ ./fastboot oem getvar
...
(bootloader) [ERR] Command error !!!
and whindows pc?
JHyde92 said:
MacBook-Prolatform-tools JHyde$ ./fastboot oem getvar
...
(bootloader) [ERR] Command error !!!
Click to expand...
Click to collapse
Are you sure you are in the right section of bootloader??
It has to say "Fastboot USB"
Try to install the proper drivers on a windows system and go into bootloader (Fastboot screen) and run the command...
If you are able to go into recovery and bootloader, then your device is not bricked.
:No-Frost: said:
Are you sure you are in the right section of bootloader??
It has to say "Fastboot USB"
Try to install the proper drivers on a windows system and go into bootloader (Fastboot screen) and run the command...
If you are able to go into recovery and bootloader, then your device is not bricked.
Click to expand...
Click to collapse
Okay I've got onto a Windows computer, I've got the drivers for the HTC One loaded up onto it. Which command would it be to use? Thanks
JHyde92 said:
Okay I've got onto a Windows computer, I've got the drivers for the HTC One loaded up onto it. Which command would it be to use? Thanks
Click to expand...
Click to collapse
u have fastboot and ADB files?
No i have them for u
voltigeur said:
u have fastboot and ADB files?
No i have them for u
Click to expand...
Click to collapse
Now use "fastboot oem getvar"? I have just put TrickDroid 8.0 so I do have access to my phone if I need it. What else will I need to do? Sorry for being a bit of a noob haha
JHyde92 said:
Now use "fastboot oem getvar"? I have just put TrickDroid 8.0 so I do have access to my phone if I need it. What else will I need to do? Sorry for being a bit of a noob haha
Click to expand...
Click to collapse
if you have the system booted into the rom, first you will have to issue the command "adb reboot bootloader". That will take you to the bootloader were you will be able to run the fastboot commands like "fastboot getvar all"
That will give you some information about the device
voltigeur said:
u have fastboot and ADB files?
No i have them for u
Click to expand...
Click to collapse
:No-Frost: said:
if you have the system booted into the rom, first you will have to issue the command "adb reboot bootloader". That will take you to the bootloader were you will be able to run the fastboot commands like "fastboot getvar all"
That will give you some information about the device
Click to expand...
Click to collapse
Thanks mate, this is what I've got.
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.13.3231.27
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.771.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA33VW902453
INFOimei: 354436050499639
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3926mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
JHyde92 said:
Thanks mate, this is what I've got.
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.13.3231.27
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.771.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA33VW902453
INFOimei: 354436050499639
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3926mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
Click to expand...
Click to collapse
okay
get new unlock token at HTCDEV
Flash CMW recovery
http://forum.xda-developers.com/showthread.php?t=2173863
use this line
fastboot flash recovery recovery-clockwork-6.0.3.2-m7.img
Download your rom here:
http://bugsylawson.com/files/file/1056-m7-cwm-nandroid-backup-cid-h3g-001-128771x/
Flash it whit ADB sideload command
that wil work
Also, I recommend you to upgrade the firmware first... Don't have the link now, but you can check on Android Revolution HD topic. On first post, Mike posted a link from where to get latest firmware, make sure to have the right CID, if not, you should follow the revone instructions to get your device S-OFF (it's extremely easy ), just check on the Original Android Development section
---------- Post added at 01:35 PM ---------- Previous post was at 01:34 PM ----------
By the way, your device is S-ON so you're not gonna be able to change the CID until you get S-OFF
voltigeur said:
okay
get new unlock token at HTCDEV
Flash CMW recovery
http://forum.xda-developers.com/showthread.php?t=2173863
use this line
fastboot flash recovery recovery-clockwork-6.0.3.2-m7.img
Download your rom here:
http://bugsylawson.com/files/file/1056-m7-cwm-nandroid-backup-cid-h3g-001-128771x/
Flash it whit ADB sideload command
that wil work
Click to expand...
Click to collapse
Will I need to S-Off too?
JHyde92 said:
Will I need to S-Off too?
Click to expand...
Click to collapse
Once you have your device unlocked (bootloader unlocked by HTC Developer) you can install custom recovery (make sure to clear the cache from fastboot, can't remember the command now as I have a terrible headache and I'm doing my best trying to remember everything), then you can copy the rom into the SD or sideload the rom and then flash a custom rom...
In order to get SUPER-CID you will require to be S-OFF
Related
security Warning Phone does not boot
< waiting for device >
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.14.3250.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.29.401.16
INFOversion-misc: PVT SHIP S-ON
INFOserialno: HT35AW914121
INFOimei: 354436054966260
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: GOOGL001
INFObattery-status: good
INFObattery-voltage: 4222mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
help wat to do!!!!
Did you change your cid to that google one
a box of kittens said:
Did you change your cid to that google one
Click to expand...
Click to collapse
yes
after that S-on and never lock reboot and then i get this :crying:
voltigeur said:
yes
after that S-on and never lock reboot and then i get this :crying:
Click to expand...
Click to collapse
Why did you do that? Just flash the stock GE rom. You've got a conflict between your installed firmware and the CID.
iElvis said:
Why did you do that? Just flash the stock GE rom. You've got a conflict between your installed firmware and the CID.
Click to expand...
Click to collapse
thanks
but i only can boot in to fastboot
where can i find it
voltigeur said:
thanks
where can i find it
Click to expand...
Click to collapse
There are several versions in the Development forums.
iElvis said:
There are several versions in the Development forums.
Click to expand...
Click to collapse
can i flash it whit fastboot or RUU?
thats the only to i can boot in to
You can't even get into recovery? With s-on and that CID, no RUU will work unless there is a Google RUU.
iElvis said:
You can't even get into recovery? With s-on and that CID, no RUU will work unless there is a Google RUU.
Click to expand...
Click to collapse
is there a way te reflash bootloader o.i.d
when i try to get unlock i get
FAILED (remote: 12 signature verify fail)
Try this. You can boot to recovery via fast boot. I think the command is fastboot boot recovery name of recovery. This will boot recovery from the computer. After that you should be able to s-off with rev one. Once you unlock the bootloader again you should be able to boot
gunnyman said:
Try this. You can boot to recovery via fast boot. I think the command is fastboot boot recovery name of recovery. This will boot recovery from the computer. After that you should be able to s-off with rev one. Once you unlock the bootloader again you should be able to boot
Click to expand...
Click to collapse
can not load recovery
You boot recovery from the computer not the phone
gunnyman said:
You boot recovery from the computer not the phone
Click to expand...
Click to collapse
no that won't work
c:\adb> fastboot boot recovery
cannot load 'recovery'
its going to be whatever the name of your recovery image is
for example recovery-clockwork-6.0.3.2-m7.img
it has to be in the same directory as your fastboot executable to work
gunnyman said:
its going to be whatever the name of your recovery image is
for example recovery-clockwork-6.0.3.2-m7.img
it has to be in the same directory as your fastboot executable to work
Click to expand...
Click to collapse
c:\adb>fastboot boot recovery.img
creating boot image...
creating boot image - 8966144 bytes
< waiting for device >
downloading 'boot.img'... OKAY
booting... FAILED (remote: not allowed)
ah ok. was worth a shot. I got nothing else.
gunnyman said:
ah ok. was worth a shot. I got nothing else.
Click to expand...
Click to collapse
Probably failed because the bootloader was locked?
I think you need to unlock it one way or another. Try going through the whole process with htcdev again.
The problem is that you've made changes that need to be undone but can't be undone without being s-off and unlocked. This is why going back and forth with s-off/s-on is not a good idea.
iElvis said:
Probably failed because the bootloader was locked?
I think you need to unlock it one way or another. Try going through the whole process with htcdev again.
The problem is that you've made changes that need to be undone but can't be undone without being s-off and unlocked. This is why going back and forth with s-off/s-on is not a good idea.
Click to expand...
Click to collapse
Fixed!!! Thanks you all
Don't how to say it. But realy thx
re unlock boatloader
voltigeur said:
Fixed!!! Thanks you all
Don't how to say it. But realy thx
re unlock boatloader
Click to expand...
Click to collapse
Glad to hear it.
Next time, if you make a change that requires s-off, you should stay s-off unless you've gone completely back to stock.
yes indeed i will
Stupid stupid me
Hi, i have update my HTC One to GE 4.3. All works fine but now i must return to stock because i prefer sense. The question is, how can i run ruu? I have s off and i chance my cid to HTC__001, my hboot is 1.54, i need to do something else? Tnx for reply!
RockLee91 said:
Hi, i have update my HTC One to GE 4.3. All works fine but now i must return to stock because i prefer sense. The question is, how can i run ruu? I have s off and i chance my cid to HTC__001, my hboot is 1.54, i need to do something else? Tnx for reply!
Click to expand...
Click to collapse
Simply flash a stock RUU which matches the CID or just use fastboot oem writecid 11111111 to be able to flash any RUU.
RockLee91 said:
Hi, i have update my HTC One to GE 4.3. All works fine but now i must return to stock because i prefer sense. The question is, how can i run ruu? I have s off and i chance my cid to HTC__001, my hboot is 1.54, i need to do something else? Tnx for reply!
Click to expand...
Click to collapse
if you have S-Off download any RUU and open the .EXE file on your Windows PC, then follow the instruction
Can i execute a ruu of a lower version? And can i do that with 1.54 hboot? When i try with HTC__001 cid the setup wizard give me error this is the ruu i want to flash. RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
Its the correct One?
I've tried with super cid but the result was the same... Any advice?
RockLee91 said:
I've tried with super cid but the result was the same... Any advice?
Click to expand...
Click to collapse
Try this.
1. Run the RUU and click next but no further
2. Go to your user folder ie C:\Users\Nameofuser\AppData\Local\Temp
3. Search for rom.zip and then copy it to another location on your PC
4. Stop the RUU
5. Reboot your phone into the bootloader
6. Go into fastboot
7. fastboot oem rebootRUU
8. fastboot flash zip rom.zip (will fail the first time)
9. fastboot flash zip rom.zip (should now work)
daleski75 said:
Try this.
1. Run the RUU and click next but no further
2. Go to your user folder ie C:\Users\Nameofuser\AppData\Local\Temp
3. Search for rom.zip and then copy it to another location on your PC
4. Stop the RUU
5. Reboot your phone into the bootloader
6. Go into fastboot
7. fastboot oem rebootRUU
8. fastboot flash zip rom.zip (will fail the first time)
9. fastboot flash zip rom.zip (should now work)
Click to expand...
Click to collapse
The first time i do fastboot the terminal work for a while and then get the failed message, the second time got failed message again without work, it says status read failed (too many links)
RockLee91 said:
The first time i do fastboot the terminal work for a while and then get the failed message, the second time got failed message again without work, it says status read failed (too many links)
Click to expand...
Click to collapse
Did you literally flash everything to get the GE edition as per another thread on the conversion and also did you flash the 4.3 GE hboot?
I flash the zip of the rooted GE 4.3 the same way you told me to do before.
I follow this guide : http://forum.xda-developers.com/showthread.php?t=2358781
RockLee91 said:
I flash the zip of the rooted GE 4.3 the same way you told me to do before
Click to expand...
Click to collapse
can you run fastboot getvar all and post the output here?
INFOversion: 0.5
INFOversion-bootloader: 1.54.0000
INFOversion-baseband: 4A.18.3263.15
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.06.1700.10
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: *************
INFOimei: *************
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3826mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-94cf81a8fd
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.062s
Probably a good idea to remove your IMEI and SERIAL number from your post but anyway...
Try just flashing the stock rom from this thread using CWM or TWRP and then flash the stock recovery back after.
http://forum.xda-developers.com/showthread.php?t=2224752
Done, remove from quote top pls XD
daleski75 said:
Probably a good idea to remove your IMEI and SERIAL number from your post but anyway...
Try just flashing the stock rom from this thread using CWM or TWRP and then flash the stock recovery back after.
http://forum.xda-developers.com/showthread.php?t=2224752
Click to expand...
Click to collapse
how can i get custom recovery on GE 4.3?
RockLee91 said:
how can i get custom recovery on GE 4.3?
Click to expand...
Click to collapse
Flash a custom recovery as normal ie fastboot flash recovery openrecovery.img etc
i have flashed the rom that you linked me but now the phone stuck on boot screen :crying:
any advice?
SOLVED: i've flashed another rom and now work like a charm i flashed android revolution hd 12.1 ^^ tnx for all the support you saved me!
Okay. So, here's the deal. I got a 64GB HTC One developer's edition via trade. The previous owner had the bootloader unlocked, S-OFF, SIM unlocked, rooted and a custom ROM loaded (Revolution HD I believe he said). Anyways, he did a factor reset on the phone to get all his info off and when he handed it to me it was still booting up. I didn't think anything of it until I get home and it is stuck on the HTC splash screen with the red text at the bottom saying that this is for development blah blah blah.
I boot into bootloader and then go into recovery and it's Team Win's touch recovery. Okay, cool. I start looking through everything and decide to try another factory reset and after that's done I go to reboot it and it says "No OS loaded...." at the top. WTF?!?! No OS? So, then I go to the file manager and look through everything on the /sdcard/ and there's no zip files, nothing, nada, zilch, big MF'n goose egg.
I've tried everything that I know to do and haven't had any luck. So far I have managed to flash CWM recovery, but I can't mount USB storage to copy over a ROM file. I also noticed that in fastboot the device is recognized, but in adb it isn't (found this out by using the devices command in both adb and fastboot and only got it listed in fastboot). I've attempted to sideload, but that's done thru adb and the device isn't recognized there. I tried flashing it to the /sdcard/ partition via fastboot, but got an error message of this: writing ' /sdcard/ ' ... FAILED (remote: not allowed)
Sooooooo..... help would be greatly appreciated! :laugh:
Output of fastboot getvar all and is bootloader locked or unlocked? do not lock it.
Also when you click install in twrp, does it show the sdcard size or says 0MB?
sent from my mobile device
---------- Post added at 11:53 PM ---------- Previous post was at 11:49 PM ----------
Also fastboot command only work in fastboot mode. ADB commands only work in recovery or when you are booted in OS. ADB does not work in fastboot mode, and fastboot command does not work in recovery or booted OS
sent from my mobile device
SaHiLzZ said:
Output of fastboot getvar all and is bootloader locked or unlocked? do not lock it.
Also when you click install in twrp, does it show the sdcard size or says 0MB?
sent from my mobile device
---------- Post added at 11:53 PM ---------- Previous post was at 11:49 PM ----------
Also fastboot command only work in fastboot mode. ADB commands only work in recovery or when you are booted in OS. ADB does not work in fastboot mode, and fastboot command does not work in recovery or booted OS
sent from my mobile device
Click to expand...
Click to collapse
Bootloader is unlocked. I got rid of TWRP at the suggestion of another member in a different thread regarding a similar problem. So, now I have CWM recovery.
DJ_Caibel said:
Bootloader is unlocked. I got rid of TWRP at the suggestion of another member in a different thread regarding a similar problem. So, now I have CWM recovery.
Click to expand...
Click to collapse
Like @SaHiLzZ said, post your ''fastboot getvar all''
Maybe you could simply start over with a fresh install of the latest dev edition ruu from htcdev.
alray said:
Like @SaHiLzZ said, post your ''fastboot getvar all''
Maybe you could simply start over with a fresh install of the latest dev edition ruu from htcdev.
Click to expand...
Click to collapse
Yeah, that sounds like the best option at this point. Now, to get the correct RUU. My phone is OS 3.17.502.3 with Radio 4T.20.3218.13 and I found an AT&T (Cingular) RUU with the correct OS, but an older radio.
alray said:
Like @SaHiLzZ said, post your ''fastboot getvar all''
Maybe you could simply start over with a fresh install of the latest dev edition ruu from htcdev.
Click to expand...
Click to collapse
c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.55.0000
INFOversion-baseband: 4T.20.3218.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.17.502.3
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: XXXXXXXXXXXX
INFOimei: XXXXXXXXXXXXXX
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4284mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-2da61e5e88
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.076s
You might want to edit your post and cover your imei bro
Sent from my HTC One using xda app-developers app
Htc one no os
Hi there everyone. I am really hoping for a proper solution here.
So the deal is.
I have got a HTC ONE used. It is provider locked on Dutch vodafone. Had really no problems until one night when I did an update and in the morning I woke up with a phone without OS. Now I already tried almost everything. Tried to push on a rom image through adb but the phone is not connected to the PC. I've been looking on all the forums but neighter the suggestions work. If anyone could have any idea, it would be a lot of help
Details
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.21.3263.04
OpenDSP-v32.120.274.0909
OS-3.62.401.1
eMMC-boot 2048MB
Oct 17 2013,23:06:14.0
I've tried fastboot usb but stil not getting connection with pc.
I really need help here.
Thanks.
fekeshazi said:
Hi there everyone. I am really hoping for a proper solution here.
So the deal is.
I have got a HTC ONE used. It is provider locked on Dutch vodafone. Had really no problems until one night when I did an update and in the morning I woke up with a phone without OS. Now I already tried almost everything. Tried to push on a rom image through adb but the phone is not connected to the PC. I've been looking on all the forums but neighter the suggestions work. If anyone could have any idea, it would be a lot of help
Details
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.55.0000
RADIO-4A.21.3263.04
OpenDSP-v32.120.274.0909
OS-3.62.401.1
eMMC-boot 2048MB
Oct 17 2013,23:06:14.0
I've tried fastboot usb but stil not getting connection with pc.
I really need help here.
Thanks.
Click to expand...
Click to collapse
Please start your own thread and post your ''fastboot getvar all'' minus your IMEI/SN. It will be confusing for the OP if we help you here.
---------- Post added at 11:39 AM ---------- Previous post was at 11:29 AM ----------
DJ_Caibel said:
c:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.55.0000
INFOversion-baseband: 4T.20.3218.13
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.17.502.3
INFOversion-misc: PVT SHIP S-OFF
INFOserialno:
INFOimei:
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0712000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 4284mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-2da61e5e88
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.076s
Click to expand...
Click to collapse
Remove your IMEI and SERIALNO from the above post!
Stay S-OFF and don't relock bootloader.
download latest dev edition RUU.zip an save it to your abd/fastboot folder
change your CID back to BS_US001:
boot your phone in bootloader mode / fastboot usb mode and open your cmd prompt
Code:
fastboot oem writecid BS_US001
fastboot reboot-bootloader
reboot your phone in RUU mode:
Code:
fastboot oem rebootRUU
When you see the black screen with the HTC logo, flash the ruu:
Code:
fastboot flash zip <name_of_file>.zip
fastboot flash zip <name_of_file>.zip <----- flash twice!
fastboot reboot
"Please start your own thread and post your ''fastboot getvar all'' minus your IMEI/SN. It will be confusing for the OP if we help you here."
I think I did but cant find my own thred.
The problem is that the phone is still not recognised.The command prompt sits on waiting for device for an hour now.
fekeshazi said:
I think I did but cant find my own thred.
Click to expand...
Click to collapse
no: http://forum.xda-developers.com/search.php?searchid=260253068
go ahead and start one, then mention me in your thread using @alray
Thanks for the help everyone. I was able to flash a RUU and get it booted. Thanks again!
Hello everybody, I´m a little newbie here so need some URGEN HELP.
1.- I bought an HTC ONE (m7) 64GB Developer Edition from SWAPPA with ClockworkMod Recovery and CyanogenMod 11 on it.
2.- While looking into XDA-Developer was following a thread to get it back to stock recovery using nandroid so I can flash an RUU from HTCDEV
While doing that seems that I erase everything from the phone and now it´s giving me an error mounting e:/ drive and It doesn´t recognize the phone in ADB mode.
I´m stuck with the CWM without the ability to get files into /sdcard/0/clockworkmode/backups
Can someone help me or point me in the right direction to get back to the stock android that the HTC Developer Edition (m7) comes in factory default.
ulises.boom said:
2.- While looking into XDA-Developer was following a thread to get it back to stock recovery using nandroid so I can flash an RUU from HTCDEV
Click to expand...
Click to collapse
you don't need stock recovery to use a ruu. Recovery is overwritten by the ruu.
ulises.boom said:
While doing that seems that I erase everything from the phone and now it´s giving me an error mounting e:/ drive and It doesn´t recognize the phone in ADB mode.
I´m stuck with the CWM without the ability to get files into /sdcard/0/clockworkmode/backups
Can someone help me or point me in the right direction to get back to the stock android that the HTC Developer Edition (m7) comes in factory default.
Click to expand...
Click to collapse
Just flash the latest dev edition ruu http://www.htc1guru.com/2014/03/android-dev-ruu/
@alray Thanks for the prompt response.
I will download and try that later today after work.
But some questions so I don´t do something stupid:
I have to restart the phone on Fastboot mode or Recovery Mode for the RUU to work, as the phone is starting with the Gray and red triangle and an admiration mark.?
Thanks
ulises.boom said:
@alray Thanks for the prompt response.
I will download and try that later today after work.
But some questions so I don´t do something stupid:
I have to restart the phone on Fastboot mode or Recovery Mode for the RUU to work, as the phone is starting with the Gray and red triangle and an admiration mark.?
Thanks
Click to expand...
Click to collapse
you can run the ruu.exe in bootloader mode if you want, it will then switch to ruu mode by itself. If the phone were booted in the OS the ruu.exe will make it reboot in ruu mode.
@arlay Sorry to tell you that it didn´t work.
Let me explain a little of what I have here:
It seems that I erase everythin in the Phone except by the Fastboot and Recovery.
I´m having the following errors:
E:Can´t mount /cache/recovery/
E: unknown volume "/sdcard/.android_secure
Running the RUU I got Error 155.
And another thing, it can find /system/xbin/su
Do I hava a recobrable one or a brick?
I have it on s-on and could not made it s-off with revone
alray said:
you can run the ruu.exe in bootloader mode if you want, it will then switch to ruu mode by itself. If the phone were booted in the OS the ruu.exe will make it reboot in ruu mode.
Click to expand...
Click to collapse
ulises.boom said:
@arlay Sorry to tell you that it didn´t work.
Let me explain a little of what I have here:
It seems that I erase everythin in the Phone except by the Fastboot and Recovery.
I´m having the following errors:
E:Can´t mount /cache/recovery/
E: unknown volume "/sdcard/.android_secure
Running the RUU I got Error 155.
And another thing, it can find /system/xbin/su
Do I hava a recobrable one or a brick?
I have it on s-on and could not made it s-off with revone
Click to expand...
Click to collapse
1- can you post a "fastboot getvar all" (excluding IMEI and s/n)
2- with S-On you need to relock bootloader for RUU (same or higher version) to work
3- for S-Off, you should also try rumrunner and firewater
@nkk71 Here is the results of the getvar
List of devices attached
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.18.3263.15
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.1540.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4281mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (
status read failed (Too many links))
finished. total time: 0.062s
nkk71 said:
1- can you post a "fastboot getvar all" (excluding IMEI and s/n)
2- with S-On you need to relock bootloader for RUU (same or higher version) to work
3- for S-Off, you should also try rumrunner and firewater
Click to expand...
Click to collapse
ulises.boom said:
@nkk71 Here is the results of the getvar
List of devices attached
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-main: 1.29.1540.16
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) modelid: PN0712000
(bootloader) cidnum: BS_US001
finished. total time: 0.062s
Click to expand...
Click to collapse
Personally, I would use this ruu.exe : http://www.htc1guru.com/dld/ruu_m7_ul_jb_50_brightstarus_wwe_1-29-1540-16-exe/
it's the same version as your current one, which would give you a chance to S-Off, if you wish.... a higher version, could make that more difficult.
the RUU will work but you need to lock your bootloader using fastboot oem lock
I know it's ironic that the Dev Edition is bootloader unlocked be default, but RUU's wont work with that.
@arlay & @nkk71 Thanks a million for helping me solve my problem.
I have a functional HTC ONE m7ul Developer Edition back in business.
Now to wait for a KitKat Update to put it on the Mobile.
nkk71 said:
Personally, I would use this ruu.exe : http://www.htc1guru.com/dld/ruu_m7_ul_jb_50_brightstarus_wwe_1-29-1540-16-exe/
it's the same version as your current one, which would give you a chance to S-Off, if you wish.... a higher version, could make that more difficult.
the RUU will work but you need to lock your bootloader using fastboot oem lock
I know it's ironic that the Dev Edition is bootloader unlocked be default, but RUU's wont work with that.
Click to expand...
Click to collapse
I´m a very happy man again.
Have been receving and updating the phone with already three OTA Updates without any issues so far.
Many thanks to the guys/girls on XDA-Developers for this very helpful site.
ulises.boom said:
@arlay & @nkk71 Thanks a million for helping me solve my problem.
I have a functional HTC ONE m7ul Developer Edition back in business.
Now to wait for a KitKat Update to put it on the Mobile.
Click to expand...
Click to collapse
ulises.boom said:
Hello everybody, I´m a little newbie here so need some URGEN HELP.
1.- I bought an HTC ONE (m7) 64GB Developer Edition from SWAPPA with ClockworkMod Recovery and CyanogenMod 11 on it.
2.- While looking into XDA-Developer was following a thread to get it back to stock recovery using nandroid so I can flash an RUU from HTCDEV
While doing that seems that I erase everything from the phone and now it´s giving me an error mounting e:/ drive and It doesn´t recognize the phone in ADB mode.
I´m stuck with the CWM without the ability to get files into /sdcard/0/clockworkmode/backups
Can someone help me or point me in the right direction to get back to the stock android that the HTC Developer Edition (m7) comes in factory default.
Click to expand...
Click to collapse
Is this the link you talking about?
http://www.youtube.com/watch?v=rpA71FXddyU
Hello everyone,
I am trying to get S-ON and I cant seem to figure it out, here is a little bit of background information you may need to provide proper help.
------------------------------------------------------------------
Background info:
- HTC One M7
- I have a LOCKED Bootloader
- I have tried "fastboot oem writesecureflag 3" command to try to set S-ON but i got this error: "partitions siganture failed"
- I have stock recovery
------------------------------------------------------------------
If someone can help me it would be greatly appreciated.
slicer812 said:
Hello everyone,
I am trying to get S-ON and I cant seem to figure it out, here is a little bit of background information you may need to provide proper help.
------------------------------------------------------------------
Background info:
- HTC One M7
- I have a LOCKED Bootloader
- I have tried "fastboot oem writesecureflag 3" command to try to set S-ON but i got this error: "partitions siganture failed"
- I have stock recovery
------------------------------------------------------------------
If someone can help me it would be greatly appreciated.
Click to expand...
Click to collapse
post your fastboot getvar all minus serial and IMEI and your bootloader screen
clsA said:
post your fastboot getvar all minus serial and IMEI and your bootloader screen
Click to expand...
Click to collapse
What is "getvar" and also why would you need my IMEI?
Here is a pic of my bootloader.
slicer812 said:
What is "getvar" and also why would you need my IMEI?
Here is a pic of my bootloader.
Click to expand...
Click to collapse
you have a Verizon HTC one ...why would you want s-on ?
it may be impossible to ever s-off again and you'll be stuck with stock
I said Minus your Serial and IMEI
clsA said:
you have a Verizon HTC one ...why would you want s-on ?
it may be impossible to ever s-off again and you'll be stuck with stock
I said Minus your Serial and IMEI
Click to expand...
Click to collapse
The reason I would want S-ON is to update to HTC Sense 6 Verizon does not allow updates to go through with S-OFF, as I was told by HTC, I have tested updating my device it wont work.
slicer812 said:
The reason I would want S-ON is to update to HTC Sense 6 Verizon does not allow updates to go through with S-OFF, as I was told by HTC, I have tested updating my device it wont work.
Click to expand...
Click to collapse
you phone will update with s-off
you need stock recovery
you should be using these forums before you screw up completely
http://forum.xda-developers.com/verizon-htc-one/general
clsA said:
you phone will update with s-off
you need stock recovery
Click to expand...
Click to collapse
I have the stock recovery though. And when i called HTC they said it will only update with S-ON.
slicer812 said:
I have the stock recovery though. And when i called HTC they said it will only update with S-ON.
Click to expand...
Click to collapse
lol, what did you think they would say ...shakes head
go here and do some reading
http://forum.xda-developers.com/verizon-htc-one/general
clsA said:
lol, what did you think they would say ...shakes head
go here and do some reading
http://forum.xda-developers.com/verizon-htc-one/general
Click to expand...
Click to collapse
I have looked up many things like that I just cant figure out what else i need to do I have tried restoring S-On by doing this "fastboot oem writesecureflag 3" then I get this error "partitions siganture failed"
Any suggestions?
And by the way I appreciate all your help.
slicer812 said:
I have looked up many things like that I just cant figure out what else i need to do I have tried restoring S-On by doing this "fastboot oem writesecureflag 3" then I get this error "partitions siganture failed"
Any suggestions?
And by the way I appreciate all your help.
Click to expand...
Click to collapse
regardless of what HTC told you you don't need s-on to take the OTA ...
have you downloaded the OTApkg.zip ?
what stock recovery did you use ?
what is your fastboot getvar all results ? Minus your serial and IMEI
clsA said:
regardless of what HTC told you you don't need s-on to take the OTA ...
have you downloaded the OTApkg.zip ?
what stock recovery did you use ?
what is your fastboot getvar all results ? Minus your serial and IMEI
Click to expand...
Click to collapse
What is "fastboot getvar"? Also where do I get the OTApkg.zip?
slicer812 said:
What is "fastboot getvar"? Also where do I get the OTApkg.zip?
Click to expand...
Click to collapse
fastboot is an app you run from your PC command prompt to flash your phone
fastboot flash recovery recovery.zip is an example
fastboot getvar all outputs the specs for your device
here's mine
C:\fastboot>adb reboot
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000 My phones hboot
(bootloader) version-baseband: 4T.27.3218.14 Radio
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 5.11.401.10 < my phones software version
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT34 Removed
(bootloader) imei: 354 Removed
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000 My MID
(bootloader) cidnum: CWS__001 My CID
(bootloader) battery-status: good
(bootloader) battery-voltage: 4316mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e47fb74b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.066s
C:\fastboot>
Click to expand...
Click to collapse
here's the only RUU I can find for your phone
http://flyhalf205.com/?dir=RUU/m7vzw
you flash them with fastboot
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip << yes two times
fastboot reboot-bootloader
Just make sure you name the RUU rom.zip not rom.zip.zip and it's in the same folder as fastboot
Don't lock your bootloader and Don't go s=on
just flash the PN07IMG_M7_WL_JB_50_VZW_2.10.605.1_DECRYPT.zip
and take all the OTA updates you want .. then flash custom recovery and re- root your phone if you want.
clsA said:
fastboot is an app you run from your PC command prompt to flash your phone
fastboot flash recovery recovery.zip is an example
fastboot getvar all outputs the specs for your device
here's mine
here's the only RUU I can find for your phone
http://flyhalf205.com/?dir=RUU/m7vzw
you flash them with fastboot
fastboot oem rebootRUU
fastboot flash zip rom.zip
fastboot flash zip rom.zip << yes two times
fastboot reboot-bootloader
Just make sure you name the RUU rom.zip not rom.zip.zip and it's in the same folder as fastboot
Click to expand...
Click to collapse
I used flashify app to flash my recovery but I backed up my stock recovery. My phone is on the stock recovery right now and its been on stock for over a day now. I tried to issue the command "fastboot getvar" but nothing happened and it listed command options. I do not have too much experience with this lol sorry if I'm annoying you.
slicer812 said:
I used flashify app to flash my recovery but I backed up my stock recovery. My phone is on the stock recovery right now and its been on stock for over a day now. I tried to issue the command "fastboot getvar" but nothing happened and it listed command options. I do not have too much experience with this lol sorry if I'm annoying you.
Click to expand...
Click to collapse
pretty much all i can tell you is, everything you need is above in post #12
Flash the RUU and your phone will redownload and install the updates one at a time.
Don't Relock the bootloader
Don'T go S-On !
use this custom recovery when you done taking updates
http://techerrata.com/file/twrp2/m7vzw/openrecovery-twrp-2.7.0.1-m7wlv.img
P.S I'm not Annoyed ..I'm just old and grouchy
clsA said:
pretty much all i can tell you is, everything you need is above in post #12
Flash the RUU and your phone will redownload and install the updates one at a time.
Don't Relock the bootloader
Don'T go S-On !
use this custom recovery when you done taking updates
http://techerrata.com/file/twrp2/m7vzw/openrecovery-twrp-2.7.0.1-m7wlv.img
P.S I'm not Annoyed ..I'm just old and grouchy
Click to expand...
Click to collapse
What if I install the RUU and I cant update my phone? <-- Im not sure if thats even possible. lol
Couldn't I just call verizon and have them push an RUU to my phone? They said they could do that.
elsaltu vers
slicer812 said:
What if I install the RUU and I cant update my phone? <-- Im not sure if thats even possible. lol
Couldn't I just call verizon and have them push an RUU to my phone? They said they could do that.
Click to expand...
Click to collapse
Also, would installing the RUU wipe my phone?
Have somewhat similar problem
have RUU flashed should be completely stock, but can't S-ON
https://www.dropbox.com/s/33jun0xivk0wamt/Screenshot 2014-07-13 00.02.23.png
Heres the getvar all
Btw, does the RUU contains stock recovery?
slicer812 said:
Also, would installing the RUU wipe my phone?
Click to expand...
Click to collapse
Yes RUU wipes everything
Sent from my HTC One_M8 using Tapatalk 4
---------- Post added at 09:49 PM ---------- Previous post was at 09:48 PM ----------
alwinwh said:
Have somewhat similar problem
have RUU flashed should be completely stock, but can't S-ON
https://www.dropbox.com/s/33jun0xivk0wamt/Screenshot 2014-07-13 00.02.23.png
Heres the getvar all
Btw, does the RUU contains stock recovery?
Click to expand...
Click to collapse
Yes RUU is stock everything
Don't go S-on ever!!
Sent from my HTC One_M8 using Tapatalk 4
clsA said:
Yes RUU wipes everything
Sent from my HTC One_M8 using Tapatalk 4
Click to expand...
Click to collapse
What if I install an RUU and I still can't update my phone? Also, couldn't I call Verizon and have them puch an RUU to my phone, they said they can do that?
slicer812 said:
What if I install an RUU and I still can't update my phone? Also, couldn't I call Verizon and have them puch an RUU to my phone, they said they can do that?
Click to expand...
Click to collapse
Just flash the RUU and take the updates
Sent from my HTC One_M8 using Tapatalk 4