Hi!
Can someone help me step by step to get back to a complete stock HTC One
I have flashed Guru Reset RUU M7 3.6, but want to go back to complete stock via OTA.
So I want to go back to 2.2.1 and trough OTA back to 2.3.
Or maybe you can help my with a other way to get back to complete stock.
This is my getvar:
INFOversion: 0.5
INFOversion-bootloader: 1.55.0000
INFOversion-baseband: 4A.21.3263.04
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.62.401.1
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: SH0000000000
INFOimei: 0000000000000
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: CWS__001
INFObattery-status: good
INFObattery-voltage: 3996mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-bb768ae1
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Ronnymes said:
Hi!
Can someone help me step by step to get back to a complete stock HTC One
I have flashed Guru Reset RUU M7 3.6, but want to go back to complete stock via OTA.
So I want to go back to 2.2.1 and trough OTA back to 2.3.
Or maybe you can help my with a other way to get back to complete stock.
This is my getvar:
INFOversion-bootloader: 1.55.0000
INFOversion-main: 3.62.401.1
INFOversion-misc: PVT SHIP S-OFF
INFOproduct: m7_ul
INFOmodelid: PN0710000
INFOcidnum: CWS__001
all: Done!
Click to expand...
Click to collapse
OK, I need some more information please: did you change MID or CID at any point? cause yours don't make much sense:
1- you're from Holland (ie Europe)
2- you have CID CWS__001, which is ATT US if i'm not mistaken
what do you want your phone to be? European unbranded?
nkk71 said:
OK, I need some more information please: did you change MID or CID at any point? cause yours don't make much sense:
1- you're from Holland (ie Europe)
2- you have CID CWS__001, which is ATT US if i'm not mistaken
what do you want your phone to be? European unbranded?
Click to expand...
Click to collapse
Never changed the MID or CID, just flashed Guru_Reset_M7_3.62.401.1
I am from Holland, correct!
And yes I want a European unbranded and locked and S-on HTC One, complete stock.
Ronnymes said:
Never changed the MID or CID
I am from Holland, correct!
Where can i find my cid?
And yes I want a European unbranded and locked and S-on HTC One, complete stock.
Click to expand...
Click to collapse
your CID was in getvar: "cidnum: CWS__001"
this means the phone was (unless someone changed it ATT US edition), anyway:
European unbranded: easy enough with s-off:
Holland should be CID: HTC__E11
so first thing, in bootloader/FASTBOOT USB, change your CID:
fastboot oem writecid HTC__E11 (two underscores)
fastboot reboot-bootloader
-> and confirm CID is HTC__E11
then follow my guide POST 1 and POST 2, and you're done. (http://forum.xda-developers.com/showthread.php?t=2541082)
use this RUU.EXE: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
hit thanks if i've helped let me know if you need more help
nkk71 said:
your CID was in getvar: "cidnum: CWS__001"
this means the phone was (unless someone changed it ATT US edition), anyway:
European unbranded: easy enough with s-off:
Holland should be CID: HTC__E11
so first thing, in bootloader/FASTBOOT USB, change your CID:
fastboot oem writecid HTC__E11 (two underscores)
fastboot reboot-bootloader
-> and confirm CID is HTC__E11
then follow my guide POST 1 and POST 2, and you're done. (http://forum.xda-developers.com/showthread.php?t=2541082)
use this RUU.EXE: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
hit thanks if i've helped let me know if you need more help
Click to expand...
Click to collapse
Oke, just changed my CID to HTC__11
Downloading the RUU
:highfive:
Ronnymes said:
Oke, just changed my CID to HTC__11
Downloading the RUU
:highfive:
Click to expand...
Click to collapse
HTC__E11 not HTC__11
CID has to be exactly 8 characters!!!!!
please confirm!
EDIT: follow the guide exactly as described, 1 then 2 then 3 etc.
nkk71 said:
HTC__E11 not HTC__11
CID has to be exactly 8 characters!!!!!
please confirm!
EDIT: follow the guide exactly as described, 1 then 2 then 3 etc.
Click to expand...
Click to collapse
My bad, it's E11
Download is ready.. RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
So now I have the flash this RUU?
And than:
Step 1: let's get rid of TAMPERED (if it's there) and set you back to LOCKED (not relocked)
In bootloader/FASTBOOT USB, boot to CWM recovery:
fastboot boot CWM.img
Ronnymes said:
My bad, it's E11
Download is ready.. RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
So now I have the flash this RUU?
And than:
Step 1: let's get rid of TAMPERED (if it's there) and set you back to LOCKED (not relocked)
In bootloader/FASTBOOT USB, boot to CWM recovery:
fastboot boot CWM.img
Click to expand...
Click to collapse
No, please do number 1, then number 2, then number 3
NOT, RUU, then number 1. RUU is number 2 on the list
nkk71 said:
No, please do number 1, then number 2, then number 3
NOT, RUU, then number 1. RUU is number 2 on the list
Click to expand...
Click to collapse
I think I am stuppid, can't see the first step...
I don't have to downgrade to 1.44 so first thing is downloading CMW?
Touch - http://flyhalf205.com/recoveries/rec...0.4.5-m7ul.img
And downloading Guru Bootloader Reset 1.0
Ronnymes said:
I think I am stuppid, can't see the first step...
I don't have to downgrade to 1.44 so first thing is downloading CMW?
Touch - http://flyhalf205.com/recoveries/rec...0.4.5-m7ul.img
And downloading Guru Bootloader Reset 1.0
Click to expand...
Click to collapse
If you’re on hboot which is above 1.44, then first thing is to downgrade that:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
Common downloads for all methods:
download CWM from here: http://forum.xda-developers.com/showthread.php?t=2173863
rename the file to CWM.img (careful about .img.img in Windows)
download Guru Bootloader Reset from here: http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/ (this is the thread http://forum.xda-developers.com/showthread.php?t=2527194)
Then post #2 of my guide for RUU.EXE: http://forum.xda-developers.com/showpost.php?p=47794190&postcount=2
nkk71 said:
If you’re on hboot which is above 1.44, then first thing is to downgrade that:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
Common downloads for all methods:
download CWM from here: http://forum.xda-developers.com/showthread.php?t=2173863
rename the file to CWM.img (careful about .img.img in Windows)
download Guru Bootloader Reset from here: http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/ (this is the thread http://forum.xda-developers.com/showthread.php?t=2527194)
Then post #2 of my guide for RUU.EXE: http://forum.xda-developers.com/showpost.php?p=47794190&postcount=2
Click to expand...
Click to collapse
Yes, it's hboot 1.44 now,
Ronnymes said:
Yes, it's hboot 1.44 now,
Click to expand...
Click to collapse
okay, now follow post #2 for RUU.EXE
nkk71 said:
okay, now follow post #2 for RUU.EXE
Click to expand...
Click to collapse
Flashing recovery first: [RECOVERY] ClockworkMod Touch v6.0.4.5
Ronnymes said:
Flashing recovery first: [RECOVERY] ClockworkMod Touch v6.0.4.5
Click to expand...
Click to collapse
not FLASH, boot:
fastboot boot CWM.img
EDIT: won't matter in step 2 you're gonna run the RUU.EXE so flash or boot is OK
nkk71 said:
not FLASH, boot:
fastboot boot CWM.img
EDIT: won't matter in step 2 you're gonna run the RUU.EXE so flash or boot is OK
Click to expand...
Click to collapse
Did't flash
c:\mini-sdk>fastboot boot CWM.img
cannot load 'CWM.img': No error
c:\mini-sdk>
Ronnymes said:
Did't flash
c:\mini-sdk>fastboot boot CWM.img
cannot load 'CWM.img': No error
c:\mini-sdk>
Click to expand...
Click to collapse
FAQ:
hopefully none, but I'll add them if any come up
1) fastboot is giving me "cannot load": the filename is wrong
Click to expand...
Click to collapse
cannot load means the filename is wrong
nkk71 said:
cannot load means the filename is wrong
Click to expand...
Click to collapse
Yeah I know, but it's copy paste...
Yes it's working now
Ronnymes said:
Yeah I know, but it's copy paste...
Click to expand...
Click to collapse
well how about
download CWM from here: http://forum.xda-developers.com/show....php?t=2173863
rename the file to CWM.img (careful about .img.img in Windows)
Click to expand...
Click to collapse
Hit the thanks button if i'm helping
nkk71 said:
well how about
Hit the thanks button if i'm helping
Click to expand...
Click to collapse
It's flashing now, thnx for your great help!
Ronnymes said:
It's flashing now, thnx for your great help!
Click to expand...
Click to collapse
no problem, if everything OK afterwards, edit your main thread title to include [SOLVED]
otherwise let me know
and if you don't mind hitting the thanks button on my guide
Related
Hi guys, I've looked around for this but have found no answers so far. So I'm looking to unroot my phone, but have had a massive problem when using SuperCID to change my CID to HTC___001 from H3G__001 (Three UK). Instead of changing the CID by using the command, it will say "[SD_ERR] The project doesn't support SD card" Is this because when I used s-off the data was wiped or something similar? Please help the phone is bricked and can access the bootloader and recovery (using TWRP) would it be worth trying to flash a new ROM and try to sort it out? Any help would be welcome and will be thanked for any legitimate suggestion.
People need to stop mixjng up soft bricked and bricked...what fastboot command are you entering?
Sorry, I'm not 100% sure what either one meant, but thanks. The command that is issued is - fastboot oem writecid HTC__001
Anyone else have some ideas? Need to get this fixed quickly! I'm going to try and put a new ROM on it to flash it, and then hopefully I will be able to recover it properly. I have a H3G RUU from the HTCDev portal, but don't know how to put the kernel into a RUU and boot it into the phone, so if someone knows how to do this, it would be greatly appreciated if they could tell me, thank you!
At what point did your phone stop booting (what was the step you took last time it booted)?
Are you using the SuperCID command in fastboot?
JHyde92 said:
Hi guys, I've looked around for this but have found no answers so far. So I'm looking to unroot my phone, but have had a massive problem when using SuperCID to change my CID to HTC___001 from H3G__001 (Three UK). Instead of changing the CID by using the command, it will say "[SD_ERR] The project doesn't support SD card" Is this because when I used s-off the data was wiped or something similar? Please help the phone is bricked and can access the bootloader and recovery (using TWRP) would it be worth trying to flash a new ROM and try to sort it out? Any help would be welcome and will be thanked for any legitimate suggestion.
Click to expand...
Click to collapse
how far does your phone get when booting? Splash screen or nothing at all?
voltigeur said:
how far does your phone get when booting? Splash screen or nothing at all?
Click to expand...
Click to collapse
Ardmanz said:
At what point did your phone stop booting (what was the step you took last time it booted)?
Are you using the SuperCID command in fastboot?
Click to expand...
Click to collapse
I get to bootloader and recovery, however I used to get to Cyanogenmod 10.1 load screen (blue circle) but never got past it. I am looking to unroot my phone and go back to Sense 5. I used fastboot to try SuperCID.
JHyde92 said:
I get to bootloader and recovery, however I used to get to Cyanogenmod 10.1 load screen (blue circle) but never got past it. I am looking to unroot my phone and go back to Sense 5. I used fastboot to try SuperCID.
Click to expand...
Click to collapse
go to fastboot and type this. fastboot oem getvar
and copy what you get to the thread
voltigeur said:
go to fastboot and type this. fastboot oem getvar
and copy what you get to the thread
Click to expand...
Click to collapse
MacBook-Prolatform-tools JHyde$ ./fastboot oem getvar
...
(bootloader) [ERR] Command error !!!
and whindows pc?
JHyde92 said:
MacBook-Prolatform-tools JHyde$ ./fastboot oem getvar
...
(bootloader) [ERR] Command error !!!
Click to expand...
Click to collapse
Are you sure you are in the right section of bootloader??
It has to say "Fastboot USB"
Try to install the proper drivers on a windows system and go into bootloader (Fastboot screen) and run the command...
If you are able to go into recovery and bootloader, then your device is not bricked.
:No-Frost: said:
Are you sure you are in the right section of bootloader??
It has to say "Fastboot USB"
Try to install the proper drivers on a windows system and go into bootloader (Fastboot screen) and run the command...
If you are able to go into recovery and bootloader, then your device is not bricked.
Click to expand...
Click to collapse
Okay I've got onto a Windows computer, I've got the drivers for the HTC One loaded up onto it. Which command would it be to use? Thanks
JHyde92 said:
Okay I've got onto a Windows computer, I've got the drivers for the HTC One loaded up onto it. Which command would it be to use? Thanks
Click to expand...
Click to collapse
u have fastboot and ADB files?
No i have them for u
voltigeur said:
u have fastboot and ADB files?
No i have them for u
Click to expand...
Click to collapse
Now use "fastboot oem getvar"? I have just put TrickDroid 8.0 so I do have access to my phone if I need it. What else will I need to do? Sorry for being a bit of a noob haha
JHyde92 said:
Now use "fastboot oem getvar"? I have just put TrickDroid 8.0 so I do have access to my phone if I need it. What else will I need to do? Sorry for being a bit of a noob haha
Click to expand...
Click to collapse
if you have the system booted into the rom, first you will have to issue the command "adb reboot bootloader". That will take you to the bootloader were you will be able to run the fastboot commands like "fastboot getvar all"
That will give you some information about the device
voltigeur said:
u have fastboot and ADB files?
No i have them for u
Click to expand...
Click to collapse
:No-Frost: said:
if you have the system booted into the rom, first you will have to issue the command "adb reboot bootloader". That will take you to the bootloader were you will be able to run the fastboot commands like "fastboot getvar all"
That will give you some information about the device
Click to expand...
Click to collapse
Thanks mate, this is what I've got.
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.13.3231.27
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.771.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA33VW902453
INFOimei: 354436050499639
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3926mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
JHyde92 said:
Thanks mate, this is what I've got.
C:\adb>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 1.44.0000
INFOversion-baseband: 4A.13.3231.27
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 1.28.771.6
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA33VW902453
INFOimei: 354436050499639
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: H3G__001
INFObattery-status: good
INFObattery-voltage: 3926mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
Click to expand...
Click to collapse
okay
get new unlock token at HTCDEV
Flash CMW recovery
http://forum.xda-developers.com/showthread.php?t=2173863
use this line
fastboot flash recovery recovery-clockwork-6.0.3.2-m7.img
Download your rom here:
http://bugsylawson.com/files/file/1056-m7-cwm-nandroid-backup-cid-h3g-001-128771x/
Flash it whit ADB sideload command
that wil work
Also, I recommend you to upgrade the firmware first... Don't have the link now, but you can check on Android Revolution HD topic. On first post, Mike posted a link from where to get latest firmware, make sure to have the right CID, if not, you should follow the revone instructions to get your device S-OFF (it's extremely easy ), just check on the Original Android Development section
---------- Post added at 01:35 PM ---------- Previous post was at 01:34 PM ----------
By the way, your device is S-ON so you're not gonna be able to change the CID until you get S-OFF
voltigeur said:
okay
get new unlock token at HTCDEV
Flash CMW recovery
http://forum.xda-developers.com/showthread.php?t=2173863
use this line
fastboot flash recovery recovery-clockwork-6.0.3.2-m7.img
Download your rom here:
http://bugsylawson.com/files/file/1056-m7-cwm-nandroid-backup-cid-h3g-001-128771x/
Flash it whit ADB sideload command
that wil work
Click to expand...
Click to collapse
Will I need to S-Off too?
JHyde92 said:
Will I need to S-Off too?
Click to expand...
Click to collapse
Once you have your device unlocked (bootloader unlocked by HTC Developer) you can install custom recovery (make sure to clear the cache from fastboot, can't remember the command now as I have a terrible headache and I'm doing my best trying to remember everything), then you can copy the rom into the SD or sideload the rom and then flash a custom rom...
In order to get SUPER-CID you will require to be S-OFF
Hi, i have update my HTC One to GE 4.3. All works fine but now i must return to stock because i prefer sense. The question is, how can i run ruu? I have s off and i chance my cid to HTC__001, my hboot is 1.54, i need to do something else? Tnx for reply!
RockLee91 said:
Hi, i have update my HTC One to GE 4.3. All works fine but now i must return to stock because i prefer sense. The question is, how can i run ruu? I have s off and i chance my cid to HTC__001, my hboot is 1.54, i need to do something else? Tnx for reply!
Click to expand...
Click to collapse
Simply flash a stock RUU which matches the CID or just use fastboot oem writecid 11111111 to be able to flash any RUU.
RockLee91 said:
Hi, i have update my HTC One to GE 4.3. All works fine but now i must return to stock because i prefer sense. The question is, how can i run ruu? I have s off and i chance my cid to HTC__001, my hboot is 1.54, i need to do something else? Tnx for reply!
Click to expand...
Click to collapse
if you have S-Off download any RUU and open the .EXE file on your Windows PC, then follow the instruction
Can i execute a ruu of a lower version? And can i do that with 1.54 hboot? When i try with HTC__001 cid the setup wizard give me error this is the ruu i want to flash. RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed
Its the correct One?
I've tried with super cid but the result was the same... Any advice?
RockLee91 said:
I've tried with super cid but the result was the same... Any advice?
Click to expand...
Click to collapse
Try this.
1. Run the RUU and click next but no further
2. Go to your user folder ie C:\Users\Nameofuser\AppData\Local\Temp
3. Search for rom.zip and then copy it to another location on your PC
4. Stop the RUU
5. Reboot your phone into the bootloader
6. Go into fastboot
7. fastboot oem rebootRUU
8. fastboot flash zip rom.zip (will fail the first time)
9. fastboot flash zip rom.zip (should now work)
daleski75 said:
Try this.
1. Run the RUU and click next but no further
2. Go to your user folder ie C:\Users\Nameofuser\AppData\Local\Temp
3. Search for rom.zip and then copy it to another location on your PC
4. Stop the RUU
5. Reboot your phone into the bootloader
6. Go into fastboot
7. fastboot oem rebootRUU
8. fastboot flash zip rom.zip (will fail the first time)
9. fastboot flash zip rom.zip (should now work)
Click to expand...
Click to collapse
The first time i do fastboot the terminal work for a while and then get the failed message, the second time got failed message again without work, it says status read failed (too many links)
RockLee91 said:
The first time i do fastboot the terminal work for a while and then get the failed message, the second time got failed message again without work, it says status read failed (too many links)
Click to expand...
Click to collapse
Did you literally flash everything to get the GE edition as per another thread on the conversion and also did you flash the 4.3 GE hboot?
I flash the zip of the rooted GE 4.3 the same way you told me to do before.
I follow this guide : http://forum.xda-developers.com/showthread.php?t=2358781
RockLee91 said:
I flash the zip of the rooted GE 4.3 the same way you told me to do before
Click to expand...
Click to collapse
can you run fastboot getvar all and post the output here?
INFOversion: 0.5
INFOversion-bootloader: 1.54.0000
INFOversion-baseband: 4A.18.3263.15
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 3.06.1700.10
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: *************
INFOimei: *************
INFOmeid: 00000000000000
INFOproduct: m7_ul
INFOplatform: HBOOT-8064
INFOmodelid: PN0710000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 3826mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-94cf81a8fd
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
finished. total time: 0.062s
Probably a good idea to remove your IMEI and SERIAL number from your post but anyway...
Try just flashing the stock rom from this thread using CWM or TWRP and then flash the stock recovery back after.
http://forum.xda-developers.com/showthread.php?t=2224752
Done, remove from quote top pls XD
daleski75 said:
Probably a good idea to remove your IMEI and SERIAL number from your post but anyway...
Try just flashing the stock rom from this thread using CWM or TWRP and then flash the stock recovery back after.
http://forum.xda-developers.com/showthread.php?t=2224752
Click to expand...
Click to collapse
how can i get custom recovery on GE 4.3?
RockLee91 said:
how can i get custom recovery on GE 4.3?
Click to expand...
Click to collapse
Flash a custom recovery as normal ie fastboot flash recovery openrecovery.img etc
i have flashed the rom that you linked me but now the phone stuck on boot screen :crying:
any advice?
SOLVED: i've flashed another rom and now work like a charm i flashed android revolution hd 12.1 ^^ tnx for all the support you saved me!
I re-locked my phone with a custom recovery and attempted to unlock again and goes through successful though the unlock screen does not show up.(Probably because I have no OS installed?)
Code:
fastboot flash unlocktoken unlock_code.bin
target reported max download size of 1526722560 bytes
sending 'unlocktoken' (0 KB)...
OKAY [ 0.141s]
writing 'unlocktoken'...
(bootloader) unlock token check [COLOR="DeepSkyBlue"]successfully[/COLOR]
OKAY [ 0.003s]
finished. total time: 0.144s
My current information is:
*** Tampered ***
*** RELOCKED ***
M7_UL PVT SHIP S-ON RH
HBOOT-1.54.0000
RADIO-4T.21.3218.21
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Code:
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-ON
serialno: XXXXXXXXXXXX
imei: XXXXXXXXXXXXXX
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0712000
cidnum:[COLOR="DeepSkyBlue"]GOOGL001[/COLOR]
battery-status: good
battery-voltage: 4288mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: RUU
commitno-bootloader: dirty-5d4c562c
hbootpreupdate: 11
gencheckpt: 0
Ive tried the method below with a few RUU's though I keep getting the error "FAILED (remote: 12 signature verify fail)" Their must some RUU that I can flash that correlates to my above information?
Code:
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip <path to zip>
Code:
C:\Users\chanik\Desktop\adt-bundle-windows-x86_64-20130917\sdk\platform-tools>fa
stboot flash zip rom.zip
target reported max download size of 1526722560 bytes
sending 'zip' (388870 KB)...
OKAY [ 15.220s]
writing 'zip'...
(bootloader) signature checking...
[COLOR="Red"]FAILED (remote: 12 signature verify fail)[/COLOR]
finished. total time: 53.263s
If someone could confirm I have fully bricked my device that be great so i can move on with my life
I foundout that i dont have a mainvar... is tjis bad?
ronniereiff said:
I foundout that i dont have a mainvar... is tjis bad?
Click to expand...
Click to collapse
Did you say custom recovery? Which one, I'll post instructions to unlock when I'm on my pc...
Sent from my HTC One using Tapatalk
nkk71 said:
Did you say custom recovery? Which one, I'll post instructions to unlock when I'm on my pc...
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Twrp, though i am unable to use it due to being relocked..
ronniereiff said:
Twrp, though i am unable to use it due to being relocked..
Click to expand...
Click to collapse
oh, just saw you're s-on, oops.
do you have the GPE bootloader or Sense bootloader? have you tried "fastboot oem unlock"
edit: also what are you trying to flash, link please
nkk71 said:
oh, just saw you're s-on, oops.
do you have the GPE bootloader or Sense bootloader? have you tried "fastboot oem unlock"
edit: also what are you trying to flash, link please
Click to expand...
Click to collapse
I have the GPE bootloader, really im trying to flash anything that will make my phone functional again.
Ive tried many zips from the htc one collection thread
ronniereiff said:
I have the GPE bootloader, really im trying to flash anything that will make my phone functional again.
Ive tried many zips from the htc one collection thread
Click to expand...
Click to collapse
have you tried "fastboot oem unlock"?
also check this: http://forum.xda-developers.com/showthread.php?p=48195194#post48195194 (read through the thread, to make sure it applies to you).
nkk71 said:
have you tried "fastboot oem unlock"?
also check this: http://forum.xda-developers.com/showthread.php?p=48195194#post48195194 (read through the thread, to make sure it applies to you).
Click to expand...
Click to collapse
Fastboot oem unlock does not work, ill try to flash an older hboot in ruu mode tomorrow though i have a feeling signiture check will fail.
ronniereiff said:
Fastboot oem unlock does not work, ill try to flash an older hboot in ruu mode tomorrow though i have a feeling signiture check will fail.
Click to expand...
Click to collapse
or use a same or higher version RUU, that should work; with s-on downgrade not possible, but same version or higher RUU will work.
nkk71 said:
or use a same or higher version RUU, that should work; with s-on downgrade not possible, but same version or higher RUU will work.
Click to expand...
Click to collapse
When you say version im guessing you are referring to mainver, a varible that comes back empty in fastboot. Mmy phhone has no mainver and idk why.
ronniereiff said:
When you say version im guessing you are referring to mainver, a varible that comes back empty in fastboot. Mmy phhone has no mainver and idk why.
Click to expand...
Click to collapse
yeah i saw that, dont know why it keeps happening, but you can infer from hboot 1.54 that it should be a 4.2.2 based firmware.
I don't know about GPE, but for Sense it was:
hboot 1.44 -> 1.xx firmware
hboot 1.54 -> 2.xx firmware
hboot 1.55 -> 3.xx firmware
hboot 1.56 -> 4.xx firmware
you would have to check if GPE has the same progression.
PS: though radio "4T.21.3218.21" doesnt really help, cause that looks the 4.4 GPE radio.
Anyway, I would try several RUUs in sequence, always starting with the lowest one, go up one at a time, till you find one that goes through, without failing. (has to be an official signed ruu.exe or ruu.zip, since you're s-on)
nkk71 said:
yeah i saw that, dont know why it keeps happening, but you can infer from hboot 1.54 that it should be a 4.2.2 based firmware.
I don't know about GPE, but for Sense it was:
hboot 1.44 -> 1.xx firmware
hboot 1.54 -> 2.xx firmware
hboot 1.55 -> 3.xx firmware
hboot 1.56 -> 4.xx firmware
you would have to check if GPE has the same progression.
PS: though radio "4T.21.3218.21" doesnt really help, cause that looks the 4.4 GPE radio.
Anyway, I would try several RUUs in sequence, always starting with the lowest one, go up one at a time, till you find one that goes through, without failing. (has to be an official signed ruu.exe or ruu.zip, since you're s-on)
Click to expand...
Click to collapse
I have successfully unlocked after flashing the 3.58.1700.5 kitkat firmware Just need to see how to get kitkat now
nkk71 said:
yeah i saw that, dont know why it keeps happening, but you can infer from hboot 1.54 that it should be a 4.2.2 based firmware.
I don't know about GPE, but for Sense it was:
hboot 1.44 -> 1.xx firmware
hboot 1.54 -> 2.xx firmware
hboot 1.55 -> 3.xx firmware
hboot 1.56 -> 4.xx firmware
you would have to check if GPE has the same progression.
PS: though radio "4T.21.3218.21" doesnt really help, cause that looks the 4.4 GPE radio.
Anyway, I would try several RUUs in sequence, always starting with the lowest one, go up one at a time, till you find one that goes through, without failing. (has to be an official signed ruu.exe or ruu.zip, since you're s-on)
Click to expand...
Click to collapse
So my current mainver is 3.06.1700.10, hboot 1.54.000, radio 4A.18.3263.15, cidnum: GOOGL001,modelid: PN0712000 with s-on
I tried installing roms on twrp recovery but everything is failing and cache unable to mount every time and i have to wipe it over and over to get it to mount. Any idea whats going on? ive tried formating everything.
ronniereiff said:
So my current mainver is 3.06.1700.10, hboot 1.54.000, radio 4A.18.3263.15, cidnum: GOOGL001,modelid: PN0712000 with s-on
I tried installing roms on twrp recovery but everything is failing and cache unable to mount every time and i have to wipe it over and over to get it to mount. Any idea whats going on? ive tried formating everything.
Click to expand...
Click to collapse
Cache unable to mount is ok, it's because it's wiped, so don't worry about that.
To be able to flash a 4.4 ROM, you need TWRP 2.6.3.3 or above, but since you're S-On you cannot flash a GPE 4.4 ROM as they require S-Off.
Use adb sideload, adb push, or OTG cable to get a ROM to TWRP.
Hit the thanks button if i've helped
nkk71 said:
Hit the thanks button if i've helped
Click to expand...
Click to collapse
After finally getting my phone fully working with 4.4. I have came onto XDA Forms to do just that, you have helped me out a lot, thank you!
Ronnie Reiff
ronniereiff said:
After finally getting my phone fully working with 4.4. I have came onto XDA Forms to do just that, you have helped me out a lot, thank you!
Ronnie Reiff
Click to expand...
Click to collapse
Can you post where did you get the rom you flashed?
Hello members of XDA,
I ran into a problem trying to restoring my Htc One back to sense version, it sais on the conversion thread that I should have a backup of my original Hboot, which I do not have. I don't know if that's a problem, i downloaded the 1.44 hboot as I guess that's the one I should use to get back to stock. As of now I have S off, and am on hboot 1.54 and on official GPE.
Now comes the part where I'm stuck, I do not know what kind of RUU I need to return to stock, I know I need the hboot 1.44 one but I don't want any problems with bloatware or flashing a wrong baseband etc. Can anyone point me in the right direction of the right RUU? To be sure I'm pasting a getvar all
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main: 3.62.1700.1
version-misc: PVT SHIP S-OFF
serialno: xxxx
imei: xxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4014mV
partition-layout: Generic
security: off
Stefan0vic said:
Hello members of XDA,
I ran into a problem trying to restoring my Htc One back to sense version, it sais on the conversion thread that I should have a backup of my original Hboot, which I do not have. I don't know if that's a problem, i downloaded the 1.44 hboot as I guess that's the one I should use to get back to stock. As of now I have S off, and am on hboot 1.54 and on official GPE.
Now comes the part where I'm stuck, I do not know what kind of RUU I need to return to stock, I know I need the hboot 1.44 one but I don't want any problems with bloatware or flashing a wrong baseband etc. Can anyone point me in the right direction of the right RUU? To be sure I'm pasting a getvar all
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main: 3.62.1700.1
version-misc: PVT SHIP S-OFF
serialno: xxxx
imei: xxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4014mV
partition-layout: Generic
security: off
Click to expand...
Click to collapse
well all your getvar really shows is yes you converted to GPE
what was the phone before you converted it ? CID - MID and version-main
clsA said:
well all your getvar really shows is yes you converted to GPE
what was the phone before you converted it ? CID - MID and version-main
Click to expand...
Click to collapse
Thank god I saved that all in a word document,
Well my Cid was HTC__E11 it is now supercid, the version main was 4.19.401.11
my model ID was and still is PN0710000
Stefan0vic said:
Thank god I saved that all in a word document,
Well my Cid was HTC__E11 it is now supercid, the version main was 4.19.401.11
my model ID was and still is PN0710000
Click to expand...
Click to collapse
Then download this
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
change you CID back with fastboot
fastboot oem writecid HTC__E11
here's the 1.44 hboot >> https://www.dropbox.com/s/xyqurk33yh409bi/orig_hboot_1.44.0000_M7_RUUmode.zip
flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip <name of hboot>.zip
fastboot reboot
then run the RUU .exe you should be back to almost stock
clsA said:
Then download this
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
change you CID back with fastboot
fastboot oem writecid HTC__E11
here's the 1.44 hboot >> https://www.dropbox.com/s/xyqurk33yh409bi/orig_hboot_1.44.0000_M7_RUUmode.zip
flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip <name of hboot>.zip
fastboot reboot
then run the RUU .exe you should be back to almost stock
Click to expand...
Click to collapse
Thank you so much,
Why do so many threads advice to run 1.44 RUU though? After this I will have 1.44 hboot with android 4.4.2?
Edit: Download is taking aprox 2-3 hrs. Is there any way I can download it a little bit faster?
Stefan0vic said:
Thank you so much,
Why do so many threads advice to run 1.44 RUU though? After this I will have 1.44 hboot with android 4.4.2?
Edit: Download is taking aprox 2-3 hrs. Is there any way I can download it a little bit faster?
Click to expand...
Click to collapse
try here
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
and no you have hboot 1.56 after the RUU step
the hboot 1.44 insures the RUU will work smoothly
it's also a vital step if you want to remove tampered and show locked instead of relocked
to return for repair
clsA said:
try here
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Click to expand...
Click to collapse
Saw you edited your post, thank you so much
Stefan0vic said:
I'll just keep my pc on for a bit Thank you so much for your help.
Just 1 more question, will my bootloader be updated with the RUU itself? I need the phone as much stock possible since I need to give it for warranty for camera replacement.
Click to expand...
Click to collapse
now we are getting somewhere
before running the RUU you have more work then
you have to remove the tampered flag and lock before running the RUU
use this tool to do both >> http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/
from @nkk71 SuperGuide
Method 2: Guru Bootloader Reset, more automated, but may freeze
adb push Guru_Bootloader_Reset_1.0.zip /data/media/
in recovery, "install zip" -> "choose zip" -> and select "Guru_Bootloader_Reset_1.0"
go through the installer and select "Remove TAMPERED" and "LOCK Bootloader"; once finished: continue with below reboot command
adb reboot bootloader
and confirm no TAMPERED and LOCKED status
Click to expand...
Click to collapse
clsA said:
now we are getting somewhere
before running the RUU you have more work then
you have to remove the tampered flag and lock before running the RUU
use this tool to do both >> http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/
from @nkk71 SuperGuide
Click to expand...
Click to collapse
I dont have the tampered flag so i guess i dont have to do that,
I will use that to get my bootloader locked though, thank you. RUU is still downloading as we speak but I can almost run it
So its:
1. Flash hboot
2. lock bootloader
3. run RUU?
Help!! It returns me with an image fault!!
Error: 158 !
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Stefan0vic said:
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Click to expand...
Click to collapse
don't panic .. just use a different ruu
clsA said:
don't panic .. just use a different ruu
Click to expand...
Click to collapse
I'm trying, I just don't know which one since I can't find an RUU that matches my radio
Stefan0vic said:
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Click to expand...
Click to collapse
ERROR [110]: FILE OPEN ERROR
This error message indicates that the RUU lacks some specific files or they are damaged, so the RUU cannot continue with the update. You have to get the complete RUU package and try again.
ERROR [120]: MAIN BATTERY POWER
This error message will appear when the Android phone’s battery power is not sufficient (Batter power should be more than 30%). Although RUU will instruct you to plug in the AC adapter, it will still need to make sure that your Android phone has enough power to complete the update. (The Android phone cannot charge the battery when it is connected to the PC while installing the RUU).
ERROR [130]: MODEL ID ERROR
ERROR [131]: CUSTOMER ID ERROR
One of these error messages will appear when you use the wrong RUU to do the update. The RUU will check if the Model ID and Language ID are compatible with the Android phone. Make sure you use the correct RUU to update.
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
ERROR [170]: USB CONNECTION ERROR
This error message will appear when the Android phone is not correctly connected to the host PC. It might be a USB connection problem or a PC USB driver problem. Make sure the Android phone is connected to the host PC correctly and/or check if the PC driver matches the Android phone.
Sent from my HTC One using XDA Premium 4 mobile app
I know what the error means, but I don't know what RUU I need, i thought it accepted everything since I was s off
Stefan0vic said:
I'm trying, I just don't know which one since I can't find an RUU that matches my radio
Click to expand...
Click to collapse
did you change your CID ?
if so put it back to supercid and try
also did you md5 check your download
did you flash the 1.44 hboot ?
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
File Size: 1.5 GiB - Downloads: 69507
MD5: 9ad4111ce86981e3dffcce6d9ee80551
Comments: modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Click to expand...
Click to collapse
after 69,000 plus downloads you think someone would report if it's a bad file
clsA said:
did you change your CID ?
if so put it back to supercid and try
also did you md5 check your download
did you flash the 1.44 hboot ?
after 69,000 plus downloads you think someone would report if it's a bad file
Click to expand...
Click to collapse
Yes I flashed the 1.44 HBOOT,
can I flash supercid with relocked bootloader?
I'll try another RUU in a bit. Does it matter that radio's dont match?
Stefan0vic said:
Yes I flashed the 1.44 HBOOT,
can I flash supercid with relocked bootloader?
I'll try another RUU in a bit. Does it matter that radio's dont match?
Click to expand...
Click to collapse
if you locked the bootloader all you can't do is flash a recovery (I think ? )
for a RUU all your really interested in is the x.xx.401.x part
clsA said:
if you locked the bootloader all you can't do is flash a recovery (I think ? )
for a RUU all your really interested in is the x.xx.401.x part
Click to expand...
Click to collapse
Tried another .401. ruu and its now giving usb error..
I have no idea what im doing wrong. Should HTC Sync be installed for this?
Stefan0vic said:
Tried another .401. ruu and its now giving usb error..
I have no idea what im doing wrong. Should HTC Sync be installed for this?
Click to expand...
Click to collapse
well if you flashed the 1.44 hboot your pc must work in fastboot
what state is the phone in when you run the RUU ? bootloader / recovery / Android OS ?
Hello,
I've changed the ROM on my HTC One and I want to go back to stock ROM.
Current device status:
- ROOTED
- S-OFF
- SUPERCID
- TWM RECOVERY
- CyanogenMod ROM
I'm not bothered about returning to 100% stock I just want the stock ROM back. My handset was locked to VODAFONE UK (CID VODAP001)
morgan150 said:
Hello,
I've changed the ROM on my HTC One and I want to go back to stock ROM.
Current device status:
- ROOTED
- S-OFF
- SUPERCID
- TWM RECOVERY
- CyanogenMod ROM
I'm not bothered about returning to 100% stock I just want the stock ROM back. My handset was locked to VODAFONE UK (CID VODAP001)
Click to expand...
Click to collapse
your phone is s-off which mean you can use every RUU out there. JUst change your CID/MID if required before running the ruu. If you dont want to use a ruu, you can flash a stock guru reset rom or stock odexed rom that match your firmware version.
alray said:
your phone is s-off which mean you can use every RUU out there. JUst change your CID/MID if required before running the ruu. If you dont want to use a ruu, you can flash a stock guru reset rom or stock odexed rom that match your firmware version.
Click to expand...
Click to collapse
So all I do is change the CID back and then use RUU or reflash? How do I know what firmware I'm using?
Can I use this to go back stock after changing my CID back...
http://www.htc1guru.com/dld/ota_m7_...uk_5-16-161-2-4-19-161-11_release_379920-zip/
morgan150 said:
How do I know what firmware I'm using?
Click to expand...
Click to collapse
post the output of "fastoot getvar all" except your imei and serialno
---------- Post added at 12:15 PM ---------- Previous post was at 12:14 PM ----------
morgan150 said:
Can I use this to go back stock after changing my CID back...
http://www.htc1guru.com/dld/ota_m7_...uk_5-16-161-2-4-19-161-11_release_379920-zip/
Click to expand...
Click to collapse
no this is an ota file you can not use this to restore your phone, its only a patch.
alray said:
post the output of "fastoot getvar all" except your imei and serialno
---------- Post added at 12:15 PM ---------- Previous post was at 12:14 PM ----------
no this is an ota file you can not use this to restore your phone, its only a patch.
Click to expand...
Click to collapse
I will post it as soon as I'm home from work. Thank you!
Can I get that information without using a PC?
Sent from my One using XDA Free mobile app
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.57.0000
(bootloader) version-baseband: 4T.28.3218.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.12.161.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3774mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-6d8a0b9b
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
Can anyone tell me the RUU or ROM I need please...
morgan150 said:
Can anyone tell me the RUU or ROM I need please...
Click to expand...
Click to collapse
A couple of questions, first:
Why (it helps to know what your ultimate goal is)
Do you need to go back to Vodafone or are you OK with unbranded
Do you intend on going S-ON
nkk71 said:
A couple of questions, first:
Why (it helps to know what your ultimate goal is)
Do you need to go back to Vodafone or are you OK with unbranded
Do you intend on going S-ON
Click to expand...
Click to collapse
Thank you so much for getting back to me!
1. Because I've installed loads of ROMS and not one I like or they intend to freeze etc
2. I'm more then happy to go back unbranded as long as I can still get OTA updates
3. Nope
morgan150 said:
Thank you so much for getting back to me!
1. Because I've installed loads of ROMS and not one I like or they intend to freeze etc
2. I'm more then happy to go back unbranded as long as I can still get OTA updates
3. Nope
Click to expand...
Click to collapse
hmm, I haven't had problems with most ROMs I've tried, but to each his own
change CID to international WWE unbranded:
fastboot oem writecid HTC__001 <- two underscores (CID is exactly 8 chars)
fastboot reboot-bootloader
fastboot oem readcid
^^ confirm it now says HTC__001
then you run RUU:
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
let me know if you have problems with that ruu, in which case you'd need to first downgrade your firmware.
I have a decrypted 1.28 version, that would flash pretty easily, but then you'd have to take a lot more OTA's... if that doesn't bother you let me know and i'll link instructions to it.
Anyway, i'll decrypt the 4.19 version and upload, but that's gonna take more than a few hours to upload.
PS: the RUU, will obviously wipe EVERYTHING off your phone, so backup to PC first, and yes, OTAs will be fine even with unlocked bootloader
nkk71 said:
hmm, I haven't had problems with most ROMs I've tried, but to each his own
change CID to international WWE unbranded:
fastboot oem writecid HTC__001 <- two underscores (CID is exactly 8 chars)
fastboot reboot-bootloader
fastboot oem readcid
^^ confirm it now says HTC__001
then you run RUU:
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
let me know if you have problems with that ruu, in which case you'd need to first downgrade your firmware.
I have a decrypted 1.28 version, that would flash pretty easily, but then you'd have to take a lot more OTA's... if that doesn't bother you let me know and i'll link instructions to it.
Anyway, i'll decrypt the 4.19 version and upload, but that's gonna take more than a few hours to upload.
PS: the RUU, will obviously wipe EVERYTHING off your phone, so backup to PC first, and yes, OTAs will be fine even with unlocked bootloader
Click to expand...
Click to collapse
Thanks a lot! I'll give it a go now and let you know
morgan150 said:
Thanks a lot! I'll give it a go now and let you know
Click to expand...
Click to collapse
there's also a mirror here: http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
in either case check MD5 on the download
nkk71 said:
there's also a mirror here: http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
in either case check MD5 on the download
Click to expand...
Click to collapse
Is that one the same?
morgan150 said:
Is that one the same?
Click to expand...
Click to collapse
yes same same, just two different locations, the file is exactly the same
just a question of which one gives you better download speed... i use a download manager in either case
nkk71 said:
yes same same, just two different locations, the file is exactly the same
just a question of which one gives you better download speed... i use a download manager in either case
Click to expand...
Click to collapse
The fastboot_HTC.exe stopped working
morgan150 said:
The fastboot_HTC.exe stopped working
Click to expand...
Click to collapse
download this: http://www.androidfilehost.com/?fid=23329332407574077
Code:
[B]fastboot oem rebootRUU
fastboot flash zip fw_4.19.401.9_custom.zip[/B]
^^ FAILED (remote: 90 hboot pre-update! please flush image again immediately)
... wait a few seconds
[B]fastboot flash zip fw_4.19.401.9_custom.zip[/B]
^^ yes the flash zip has to be done TWICE !!
[B]fastboot reboot-bootloader[/B]
then try ruu again... what OS are you using?
hmm, really need to get that decrypted version uploaded
nkk71 said:
download this: http://www.androidfilehost.com/?fid=23329332407574077
Code:
[B]fastboot oem rebootRUU
fastboot flash zip fw_4.19.401.9_custom.zip[/B]
^^ FAILED (remote: 90 hboot pre-update! please flush image again immediately)
... wait a few seconds
[B]fastboot flash zip fw_4.19.401.9_custom.zip[/B]
^^ yes the flash zip has to be done TWICE !!
[B]fastboot reboot-bootloader[/B]
then try ruu again... what OS are you using?
hmm, really need to get that decrypted version uploaded
Click to expand...
Click to collapse
Just flashed the firmware and now running RUU, and Windows 8.1 Pro
morgan150 said:
Just flashed the firmware and now running RUU, and Windows 8.1 Pro
Click to expand...
Click to collapse
cool, hope it works fine now, cause the old 1.xx RUUs won't work with Win8.1... so i'm glad i didnt link that to you