Good afternoon,
I have a S5830 here.
Basically my cousin bought it from some one, it was running cyanogenmod.
He didn't like it so asked me to flash stock firmware.
I did so using Odin.
Now the phone is stuck on a bootloop.
Sometimes it even gets to the main menu & then reboots.
Sometimes it just reboots after the samsung animation, depends on which firmware really.
I've tried a couple, no luck, tried flashing a custom rom, no luck.
Tried clearing cache, factory reset and formatting /data /system etc in advance settings & mounting, still no luck.
Tried KIES emergency recovery, still no luck.
Read a bunch of different threads and tried the suggestions there, still no luck.
I think this could possibly be the problem.
When flashing with Odin and the phone gets to a certain stage and displays the following.
Code:
Finding update Package...
Opening update Package...
-- Appling Muti-CSC --
Can't access to '/system/csc/XEU
/system'.
Formatting /cache...
--Appling Muti-CSC --
Can't access to '/system/csc/XEU
/system'.
Rebooting...
Any help would be appreciated, thanks.
bump
after flashing the firmware with odin , go to the recovery and do a full wipe data and wipe cache, you can go to recovery by pressing (power + home + volume up) then reboot and it will work, and you have to wait l little bit
Sent from my iPad using Tapatalk HD
Already tried that mate.
It'll get to the setup screen and a second or two later it will reboot.
G-STAR01 said:
Already tried that mate.
It'll get to the setup screen and a second or two later it will reboot.
Click to expand...
Click to collapse
Hi G-STAR01, in S5830, you go to the recovery by pressing at the same time just two buttons Home+Power .
You could try it and do the wipes.
Good luck.
Sent from my GT-S5830 with TouchWiz UX 5.0 by NaTHaN
I know.
What I meant by my previous message was that I went into recovery menu (Home+Power), wiped data and cache.
After that I rebooted the phone, it gets to the home screen/setup screen and then reboots and does the same thing.
It would be good if you state the steps you did to flash through Odin.
- How did you get into Download Mode?
- What are the files you used to flash via Odin?
- From where you took the files?
keylocker said:
It would be good if you state the steps you did to flash through Odin.
- How did you get into Download Mode?
- What are the files you used to flash via Odin?
- From where you took the files?
Click to expand...
Click to collapse
all that you need to know is here
http://forum.xda-developers.com/showthread.php?t=1034145
Viper The Ripper said:
all that you need to know is here
http://forum.xda-developers.com/showthread.php?t=1034145
Click to expand...
Click to collapse
I am not looking out to know the process. Was asking the OP to state the steps so we can help him in succeeding.
keylocker said:
It would be good if you state the steps you did to flash through Odin.
- How did you get into Download Mode?
- What are the files you used to flash via Odin?
- From where you took the files?
Click to expand...
Click to collapse
1. Download mode - Home + Volume down + Power - (Downloading...)
2. Odin v4.38 + Cooper_v1.0.ops
Options ticked - One package, Auto Reboot, and Protect Ops.
Reset time is grayed out at 200 and ticked.
Below are the files I've flashed so far and where they are from.
S5830XWKT5_S5830H3GKT3_S5830NEKT2_HOME.tar.md5 (XDA)
S5830XWKPY_S5830XWKPA_S5830XEUKP1_HOME.tar.md5 (Sammobile)
S5830BVKT4_S5830ORAKT1_S5830BVKT4_HOME.tar.md5 (can't remember)
S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5 (can't remember)
S5830XWKPN_S5830XWKP6_S5830XEUKP1_HOME.tar (Sammobile)
S5830XWKPY_S5830XWKPA_S5830CPWKP1_HOME.tar (Sammobile)
S5830XWKPN_S5830XWKP6_S5830XEUKP1_HOME.tar (can't remember)
S5830BVKT4_S5830ORAKT1_S5830BVKT4_HOME.tar.md5 (can't remember)
Also tried seperate files (some website)
S5830XWKPO
BOOT: APBOOT_S5830XWKPO_CL400247_REV03_user_low_true.tar.md5
PDA: CODE_S5830XWKPO_CL400247_REV03_user_low_true.tar.md5
CSC: GT-S5830-csc-LUXKP1.tar.md5
PHONE: MODEM_S5830XWKP7_CL407346_REV03.tar.md5
G-STAR01 said:
1. Download mode - Home + Volume down + Power - (Downloading...)
2. Odin v4.38 + Cooper_v1.0.ops
Options ticked - One package , Auto Reboot, and Protect Ops.
Reset time is grayed out at 200 and ticked.
Below are the files I've flashed so far and where they are from.
S5830XWKT5_S5830H3GKT3_S5830NEKT2_HOME.tar.md5...
Click to expand...
Click to collapse
Hi G-STAR01, you could try this (from Hubix's guide):
[*]If archive contains only .tar.md5 select it as PDA and OPS as OPS, leave other fields EMPTY
Good luck.
Sent from my GT-S5830 with TouchWiz UX 5.0 by NaTHaN
G-STAR01 said:
1. Download mode - Home + Volume down + Power - (Downloading...)
2. Odin v4.38 + Cooper_v1.0.ops
Options ticked - One package, Auto Reboot, and Protect Ops.
Reset time is grayed out at 200 and ticked.
Below are the files I've flashed so far and where they are from.
S5830XWKT5_S5830H3GKT3_S5830NEKT2_HOME.tar.md5 (XDA)
S5830XWKPY_S5830XWKPA_S5830XEUKP1_HOME.tar.md5 (Sammobile)
S5830BVKT4_S5830ORAKT1_S5830BVKT4_HOME.tar.md5 (can't remember)
S5830XWKTM_S5830OXXKT3_S5830XWKT7_HOME.tar.md5 (can't remember)
S5830XWKPN_S5830XWKP6_S5830XEUKP1_HOME.tar (Sammobile)
S5830XWKPY_S5830XWKPA_S5830CPWKP1_HOME.tar (Sammobile)
S5830XWKPN_S5830XWKP6_S5830XEUKP1_HOME.tar (can't remember)
S5830BVKT4_S5830ORAKT1_S5830BVKT4_HOME.tar.md5 (can't remember)
Also tried seperate files (some website)
S5830XWKPO
BOOT: APBOOT_S5830XWKPO_CL400247_REV03_user_low_true.tar.md5
PDA: CODE_S5830XWKPO_CL400247_REV03_user_low_true.tar.md5
CSC: GT-S5830-csc-LUXKP1.tar.md5
PHONE: MODEM_S5830XWKP7_CL407346_REV03.tar.md5
Click to expand...
Click to collapse
Is your phone hot during this process?
Sent from my GT-S5830 using xda app-developers app
BajoPrimate said:
Hi G-STAR01, you could try this (from Hubix's guide):
[*]If archive contains only .tar.md5 select it as PDA and OPS as OPS, leave other fields EMPTY
Good luck.
Sent from my GT-S5830 with TouchWiz UX 5.0 by NaTHaN
Click to expand...
Click to collapse
Just tried it with the H3G firmware.
.tar.md5 as PDA and OPS as OPS.
Still got the same problem, I also tried another wipe after that but still the same.
Blackbox421 said:
Is your phone hot during this process?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
No.
Try changing the CSC for your Phone. Odin error message states that it can't access to the particular folder where the necessary files are present.
Possible ways to me are changing the CSC to the correct one.
You mentioned that you tried flashing Multiple Package too. In that, for CSC(GT-S5830-csc-LUXKP1.tar.md5) you used a file which can be renamed to CSC_GT-S5830_LUXKP1_REV03_user_low_true.tar.md5
Just try it. Can't assure you as a solution but trying is worth it
Just an update.
I tried all the suggestions and others but couldn't get it to work.
Luckily he was able to send it to Samsung for a repair under warranty, they repaired it.
Related
Hi
Firstly I have searched and read most of the forum...
After installing Z4Root successfully (no problem), I installed oclf from the market, then clicked on install ex2 tools successfully (no problem) then clicked on install lag fix 2.2+ (failed)
It ran through everything (copy etc) then eventually said 'failed'... It then automatically rebooted, but now ALL apps have Force Close (has stopped unexpectedly) plus vibration ~ Once you have pressed 'Force Close' for all the of them you are left with a black screen with the bar at the top showing signal, battery and time, thats it.!
Please tell me how to go backwards as I can't get to oclf to un-install anything..??
What do I do now..?
Can I re-install JPO via download method, or will this not work because of it being rooted..?? If I can, do I use Re-Partition..??
Help would be very appreciated... HELP.! :-(
Thanks
Phone: UK Galaxy S / 2.2 JPO (all unlocked etc) ~ download mode is available
Best option would be to reflash xwjm8 with re-part and then flash jpo both with 512 pit
Do not repart when flashing jpo
This should be in the QnA section
Sent from my GT-I9000 using XDA App
Thanks for the reply and as I thought... The fact that it has been rooted will make no difference to re-flashing..?? Correct..??
One other question I have just downloaded JM8 from samfirmware and extracted the files but there is no CSC file in the rar..? Do I not need it ~ I thought I did.??
Thanks
topcat888 said:
Thanks for the reply and as I thought... The fact that it has been rooted will make no difference to re-flashing..?? Correct..??
One other question I have just downloaded JM8 from samfirmware and extracted the files but there is no CSC file in the rar..? Do I not need it ~ I thought I did.??
Thanks
Click to expand...
Click to collapse
That's probably a combo file so it has everything you need in one file, just use that as PDA with 512 pit and you should be fine.
chambo622 said:
That's probably a combo file so it has everything you need in one file, just use that as PDA with 512 pit and you should be fine.
Click to expand...
Click to collapse
Sort of, it contains the CODE and MODEM but no CSC...
So just to check, I should use only the CODE file (CODE_I9000XWJM8.tar) as the PDA with 512 pit and repartition on as the first flash (before JPO)..??
No MODEM or CSC file required..? Correct.?
Thanks
download csc from here...
http://forum.xda-developers.com/showthread.php?t=780867&highlight=jm8+release
ok, successfully flashed back to JM8 (see screen shot) BUT still getting Force Close for everything..??
Any ideas please...? Have I bricked it..??
topcat888 said:
ok, successfully flashed back to JM8 (see screen shot) BUT still getting Force Close for everything..??
Any ideas please...? Have I bricked it..??
Click to expand...
Click to collapse
it happens, flash again and do a wipe after flash.
After the second successful flash, the home screen picture and 'sweep glass to unlock' is back BUT after that all applications are still FC ... I can't get into keypad or the menu (or anything else either)..?
If you clear all the FC's then your back to the black screen with the status bar at the top (signal,battery & time). If you let the screen time out then press menu button you see the home screen picture with 'sweep glass to unlock' again...
What do you mean by a wipe after flash..? Hard Reset? Can't, no menu or keypad..?
Sorry, any more ideas..?
topcat888 said:
Sorry what do you mean by a wipe after flash..? Hard Reset..?
Click to expand...
Click to collapse
from recovery mode (turn on phone by pressing vol up+central button+power, release power button for a second when you see on screen "galaxy s bla bla bla" then press again until you reach recovery). from there you can perform "wipe cache partition" (you can move in that menu with volume rocker and select with central button). hope this helps.
Read please:
http://www.xda-developers.com/announcements/a-reminder-from-the-xda-moderator-team/
Yep, done that then rebooted and still FC on everything..?
PaulForde said:
Read please:
http://www.xda-developers.com/announcements/a-reminder-from-the-xda-moderator-team/
Click to expand...
Click to collapse
Sorry, can you move me to Q & A then...
topcat888 said:
Yep, done that then rebooted and still FC on everything..?
Click to expand...
Click to collapse
try also factory reset from the same menu. if doesn't work you have to flash again with odin sorry. yesterday i flashed galaxy 7 times in order to have a proper boot
topcat888 said:
Sorry, can you move me to Q & A then...
Click to expand...
Click to collapse
where is the time when you couldn't start a new topic until you had at least 10 posts and clicked the agree to TOS button
spyrale said:
try also factory reset from the same menu. if doesn't work you have to flash again with odin sorry. yesterday i flashed galaxy 7 times in order to have a proper boot
Click to expand...
Click to collapse
Factory Reset ~ That's the one..!!! ~ Thanks to everyone for your help.
I've now got back to JPO again ~ back where I started..!
One question, I presuming that JPO is not a 'full flash' as to get there you have to do JM8 first and then flash JPO (without re-partition)...
If I'm correct, when will they release a full 2.2 release..??
Thanks again
Kudos to samfirmware.com team, for bringing us (P7510 owners) much awaited stock ROM with TOUCHWIZ!
samfirmware.com have released the stock ROM for ASIAN region support for Samsung Galaxy Tab 10.1 (WIFI) version P7510DXKG4 Honeycomb 3.1 with official TouchWiz version (2011 July).
For those still awaiting official TOUCHWIZ by SAMSUNG on their tabs, this is a clean stock rom!
Just Odin the firmware (use attached odin file!) in download mode.
INSTALL VIA. ODIN ASIAN ROM (Sept):
http://hotfile.com/dl/128750251/53b94dd/P7510DXKG4.rar.html[/quote]
*Outstandingly fast (most noticable with pen memo and swype with no tracing delay) and speedy transitions(application menu open and close), file manager, diopen chinese keyboard. Polaris office suite. Southeast asian language pack. Mail exchange fixed!
**Try searching for the password in this post, clue:the color of blood.**
*~*~*
INSTALL VIA. ODIN ARABIC ROM (md5 error fixed) (july):
http://www.megaupload.com/?d=87W2G8XT
Click to expand...
Click to collapse
MIRROR:
http://dl.dropbox.com/u/38735865/P7510JPKG5.rar
Click to expand...
Click to collapse
***LATEST(MID AUG) STOCK TOUCHWIZ ROM, EXCHANGE EMAIL IS BROKEN!***SUPPORTS HINDI SCRIPTS***
SYSTEM Languages included: ENGLISH,FRENCH,ARABIC,FARSI,KOREAN.
*~*~*
INSTALL VIA. ODIN EUROPEAN ROM (OLD, june):
http://hotfile.com/dl/123934038/d74c74b/P7510XXKFC.zip.html
Click to expand...
Click to collapse
Pre-release TOUCHWIZ rom, not recommended!
Steps:
If rooted i recommend backing up your current firmware with rom manager/cwm recovery, before the plunge and saving it on your pc for future access.
Switch off the tab completely
Connect to PC
Wait for the battery Icon to display
Press power button followed by a second's delay left volume button (button near to power)
press left power button to choose odin (download mode) than right volume to confirm
Start odin ( i used the one attached below) and place:
KEEP THE DEFAULT ODIN SETTINGS!
pit file in PIT
Bootloader in Bootloader
PDA in PDA
CSc in CSc
press start and wait...........WAIT please patience!!!
Recommended add-ons:
1.To Root:
Download the root exploit from the link, save in main directory in internal memory.
Apply in STOCK recovery mode (power and left vol key combo>left icon)
(http://lts.cr/bqf )
2.Rom Manager (for clockworkmod recovery installation and backups) -root required
3.Adfree (remove ads across the system viz. browser and apps)-root required
4.Hacker's keyboard (with direction and function keys! Multiple languages supported incl. ARABIC!)
Click to expand...
Click to collapse
Great ROM. Good Job.
Am downloading this now..
My connection in Lebanon is slow but will report back if it has Touchwiz..
Odin stalled on setting the pit file, and I had no choice but to unplug. When I tried to reboot, the screen just stayed black. It won't turn on anymore, nor do the button combo's work.
Any ideas?
Yep, it has TouchWiz !!
Sweet!! *Many thanks....
woeds said:
Odin stalled on setting the pit file, and I had no choice but to unplug. When I tried to reboot, the screen just stayed black. It won't turn on anymore, nor do the button combo's work.
Any ideas?
Click to expand...
Click to collapse
Would help to know what model you have, wifi/3g IO/retail etc
SellswordShev said:
Would help to know what model you have, wifi/3g IO/retail etc
Click to expand...
Click to collapse
The Google I/O-edition
woeds said:
The Google I/O-edition
Click to expand...
Click to collapse
this is for the 7510 model (wifi only) not the google I/0 edition you will have to wait for someone to tweak it i believe
does this means that we can see a update from Samsung soon. so thats the version they have sold will get updated with TW?
Is that rom for wifi-only and can it be used on a US bought wifi Only? P7510UEKF3
Sent from my GT-P7510 using XDA Premium App
DOes the exchange email work?
dsh897 said:
this is for the 7510 model (wifi only) not the google I/0 edition you will have to wait for someone to tweak it i believe
Click to expand...
Click to collapse
The Google I/O-model identifies itself as P7510
woeds said:
Odin stalled on setting the pit file, and I had no choice but to unplug. When I tried to reboot, the screen just stayed black. It won't turn on anymore, nor do the button combo's work.
Any ideas?
Click to expand...
Click to collapse
So you can't get back to nvflash mode?
Is that rom for wifi-only and can it be used on a US bought wifi Only? P7510UEKF3
Sent from my GT-P7510 using XDA Premium App
Click to expand...
Click to collapse
Yes this is wifi only version, and there is no harm in flashing it on US bought tab but patience is virtue the process will take time! As for an error encountered when in recovery- during wiping, one can manually wipe to factory re-set and clear cache.
used2hvatreo said:
So you can't get back to nvflash mode?
Click to expand...
Click to collapse
I've tried holding the powerbutton from anywhere between 1 and 50 seconds. Also tried power+volup and power+voldown
About to odin. No issues with retail wifi right?
mughalgxt do you flash all the tar.md5 files in the pda section one after another? there are 3 files and one PDA spot? or is there one specific Md5 to flash... i dont use Odin much thx
updating the first post for steps.
And I'm guessing if we don't want to do ODIN (or in my case don't know anything about ODIN) then most likely someone will be putting together an update.zip in the coming hours?
By the way I don't know why everybody is doing this ODIN thing; when I had my XOOM there was never a need for this, it was always all about the .zip's in CWM.
Done the following:
android_fastboot_emmc_full_p4_16G_32G.pit in pit
BOOTLOADER_P7510XXKFC_CL317542.tar.md5 in bootloader
CSC_P7510OXAKFC.tar.md5 in CSC
CODE_P7510XXKFC_CL317542_REV00_user_low_ship.tar.md5 in PDA
ODIN FAILS..
RE-PARTITION CHECK
AUTO REBOOT CHECK
F.RESET TIME CHECK
error msj on device ( IN RED )
+-------------------------------+
| INVALID BINARY SIGNATURE |
+-------------------------------+
I rooted my sgs 3 mini and install custom ROMs. I loaded CM 11 (4.4.2 kitkat) from Maclaw.pl. It worked, but after few weeks, my fhone just suddenly shut down. Tried to unroot it via odin + stock ROM, but nothing happens. Or something happens, there is the samsungs own bootlogo back. But the phone is stuck on that logo. Funny part is that when I put a charger on, there appears maclaws panda charging logo. I tried to load stock charging logo via odin, but nothing happens. Phone won't get to recovery mode, but the download mode works. Any ideas what to do? Except to throw it to trash can...
If the download work so
Recovery also need to work
Try again
Also did you try flash by Odin
Sent from my GT-I8190 using xda app-developers app
oldmen said:
If the download work so
Recovery also need to work
Try again
Also did you try flash by Odin
Sent from my GT-I8190 using xda app-developers app
Click to expand...
Click to collapse
Won't go to recovery, have tried few weeks now. Download work, when tried to go recovery, it just showing the samsungs bootlogo
And yes tried flash stock ROM by odin plenty times.
Problems
Guys, i think i have similar problem. I rooted my sgs 3mini and put maclaw.pl kitkat 4.4.2, now after downloading some photos my mobile turned off, i tried to turn it on but it shown only: "samsung galaxy s3 mini i8190", after that restarted and now it wont even turn on...
Is there anything to save this mobile or? Iam soo angry on my self and on mobile -.-
blodrayn said:
Guys, i think i have similar problem. I rooted my sgs 3mini and put maclaw.pl kitkat 4.4.2, now after downloading some photos my mobile turned off, i tried to turn it on but it shown only: "samsung galaxy s3 mini i8190", after that restarted and now it wont even turn on...
Is there anything to save this mobile or? Iam soo angry on my self and on mobile -.-
Click to expand...
Click to collapse
Sad to hear :/ Hope someone can help us
Try this forum maybe will help you http://forum.xda-developers.com/showthread.php?t=2159660
Sent from my GT-I8190 using Tapatalk
oldmen said:
Try this forum maybe will help you http://forum.xda-developers.com/showthread.php?t=2159660
Sent from my GT-I8190 using Tapatalk
Click to expand...
Click to collapse
Thanks, but as I said, nothing happens. I have tried many times to flash stock firmware. I have read many posts and tips but it looks like that there is nothing to do :/
Staattius said:
Thanks, but as I said, nothing happens. I have tried many times to flash stock firmware. I have read many posts and tips but it looks like that there is nothing to do :/
Click to expand...
Click to collapse
It could be something with a corrupt param or something. Have you tried the service firmware also, not just the stock firmware?
Enable 3 button combo for recovery, do a factory reset and it will boot.
http://forum.xda-developers.com/showthread.php?t=2157105
deconectat said:
Enable 3 button combo for recovery, do a factory reset and it will boot.
http://forum.xda-developers.com/showthread.php?t=2157105
Click to expand...
Click to collapse
Tried, didn't work. Thanks for trying to help
You kan fix your phone like this
1. Download the pit file. If your phone is variant with 8Gb internal memory. Warning this pit file is only for 8Gb internal memory galaxy s3 mini all variant (i8190 i8190N i8190L) for the 16Gb variant googlelit for pit file
2. Put your phone on Download mode , conect usb cable to the phone and tick "re-partition" box
3. Choose on PIT tab your pit file from your pc where you downloaded
4. Choose on PDA tab the Stock room wat you want to flash.
5. Put again the phone in "Download mode" open again ODIN chose PDA and flash Stock Recovery. Be careful that the box is not checked "re-partition". Flash Normal. Warning this way increase binary count on Download mode. After reboot
6. Put your phone on recovery mode by holding the keys "HOME+VOLUME UP+POWER BUTONS and wipe factory reset,cashe partition and reboot the phone. Voala the phone is Works.
Follow the instructions as in the picture
joker79 said:
1. Download the pit file. If your phone is variant with 8Gb internal memory. Warning this pit file is only for 8Gb internal memory galaxy s3 mini all variant (i8190 i8190N i8190L) for the 16Gb variant googlelit for pit file
2. Put your phone on Download mode , conect usb cable to the phone and tick "re-partition" box
3. Choose on PIT tab your pit file from your pc where you downloaded
4. Choose on PDA tab the Stock room wat you want to flash.
5. Put again the phone in "Download mode" open again ODIN chose PDA and flash Stock Recovery. Be careful that the box is not checked "re-partition". Flash Normal. Warning this way increase binary count on Download mode. After reboot
6. Put your phone on recovery mode by holding the keys "HOME+VOLUME UP+POWER BUTONS and wipe factory reset,cashe partition and reboot the phone. Voala the phone is Works.
Follow the instructions as in the picture
Click to expand...
Click to collapse
Your pit-file have password protection?
Filpus said:
Your pit-file have password protection?
Click to expand...
Click to collapse
No
joker79 said:
No
Click to expand...
Click to collapse
Trying to unrar goldenxx.rar
and then comes this. its finnish and it says password needed
http://gyazo.com/9531e2ba608d103d39de9f51b32e9738
Try Now
Filpus said:
Trying to unrar goldenxx.rar
and then comes this. its finnish and it says password needed
http://gyazo.com/9531e2ba608d103d39de9f51b32e9738
Click to expand...
Click to collapse
Sorry i forgot the arhive have password. Try now i put a new arhive without password.
joker79 said:
Sorry i forgot the arhive have password. Try now i put a new arhive without password.
Click to expand...
Click to collapse
does not work :/ oh sorry forgot link http://gyazo.com/17371b77ef82a2f3804342284bdd3854
Filpus said:
does not work :/ oh sorry forgot link http://gyazo.com/17371b77ef82a2f3804342284bdd3854
Click to expand...
Click to collapse
You tick the box "re-partition" on odin ?
joker79 said:
You tick the box "re-partition" on odin ?
Click to expand...
Click to collapse
yep
Joker, have you found solution of this issue?
I have the same problem, also tried lot of thighs but nothing helped. Every try of using pit end-up with message "there is no pit partition", but stock FW I can falsh with no troubles.
Still the same behaviour only logo after staring phone and cannot get into recovery menu...
I upgraded my Samsung Galaxy Ace s5830c to 4.2.2, run.
After I moved to 4.3 and also worked, but after changing some things in build.prop (Root Explorer), my phone stopped getting into Download mode, It is a gray screen forever. Now my phone is stopped ( Loop Infinite )
I can not do unroot: Installation Aborted.
When I try to change my android version (install zip from sd card), appear this: Installation Aborted
I did found the build.prop backup, and I can not go back to stock rom by odin, because as I said, the screen turns gray when I try to enter download mode.
Help me, will have to go back stock rom, downloading a backup. (My friend did it, but I did not think and do not know how to do)
Thanks, beautiful site admin
fernando15j said:
I upgraded my Samsung Galaxy Ace s5830c to 4.2.2, run.
After I moved to 4.3 and also worked, but after changing some things in build.prop (Root Explorer), my phone stopped getting into Download mode, It is a gray screen forever. Now my phone is stopped ( Loop Infinite )
I can not do unroot: Installation Aborted.
When I try to change my android version (install zip from sd card), appear this: Installation Aborted
I did found the build.prop backup, and I can not go back to stock rom by odin, because as I said, the screen turns gray when I try to enter download mode.
Help me, will have to go back stock rom, downloading a backup. (My friend did it, but I did not think and do not know how to do)
Thanks, beautiful site admin
Click to expand...
Click to collapse
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace that should hopefully work on your phone too. Go through the entire thread and you will get to know all the possible solutions. Make sure to use your phone's own key combination to enter the download mode. Here is the link,
How to unbrick Samsung Galaxy Ace
Do post your result. Hope I helped
Thx bro
mahithm said:
Sadly you have bricked your phone. But @SuperMini has provided us with a rather simple guide on how to unbrick Samsung Galaxy Ace that should hopefully work on your phone too. Go through the entire thread and you will get to know all the possible solutions. Make sure to use your phone's own key combination to enter the download mode. Here is the link,
How to unbrick Samsung Galaxy Ace
Do post your result. Hope I helped
Click to expand...
Click to collapse
:victory: i said '' i can't enter in download mode'' ..... this link above needs the odin ( odin needs download mode ) but '-'
I said that happen a gray touch after press the download mode buttons, but already entered on download mode, altrought doesn't appear any image, already is the download mode. So i did this...
After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip
1- download mode buttons
2- volume up + to continue
3- Click in Start on Odin
When appeared Pass, done '-'... thx for tried help me, thx :victory: :laugh:
fernando15j said:
:victory: i said '' i can't enter in download mode'' ..... this link above needs the odin ( odin needs download mode ) but '-'
I said that happen a gray touch after press the download mode buttons, but already entered on download mode, altrought doesn't appear any image, already is the download mode. So i did this...
After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip
1- download mode buttons
2- volume up + to continue
3- Click in Start on Odin
When appeared Pass, done '-'... thx for tried help me, thx :victory: :laugh:
Click to expand...
Click to collapse
No problem! Glad I could help
mahithm said:
No problem! Glad I could help
Click to expand...
Click to collapse
ok then.. !! let me try this... but please tell me first...
i have Cooper_v1.0.OPS to call in OPS
then i have Latest firmware (downloaded from samsung website) for call in One package.. right?
he wrote "After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip"
so basically whats is Pit, boot, phone, pda, csc .... and where to download them all.. and why? need to know this time before do again amazing thing with my mobile....
info2shail2010 said:
ok then.. !! let me try this... but please tell me first...
i have Cooper_v1.0.OPS to call in OPS
then i have Latest firmware (downloaded from samsung website) for call in One package.. right?
he wrote "After open the Odin and add: pit, boot, phone, pda, csc.... i did wipe reset and wipe cache, then i removed the sd-card and chip"
so basically whats is Pit, boot, phone, pda, csc .... and where to download them all.. and why? need to know this time before do again amazing thing with my mobile....
Click to expand...
Click to collapse
You can continue with the installation using "One Package". According to @fernando15j, when he pressed the key combo, it was in Download Mode even though the downloading image was not displayed. If this doesn't work work either, then your last option will be USB Jig. You can use the following guide to make your own,
Need a Samsung USB Jig? Build Your Own
I hope you can unbrick your Samsung Galaxy Ace. Good Luck! Hope I helped
mahithm said:
You can continue with the installation using "One Package". According to @fernando15j, when he pressed the key combo, it was in Download Mode even though the downloading image was not displayed. If this doesn't work work either, then your last option will be USB Jig. You can use the following guide to make your own,
Need a Samsung USB Jig? Build Your Own
I hope you can unbrick your Samsung Galaxy Ace. Good Luck! Hope I helped
Click to expand...
Click to collapse
Nope.. all things failed..... i made 3 USB jigs... ( wasted 3 data cables ) ... but failed...
then i purchased a ready-made USB Jig from eBay... and tried but again failed....
now the situation is i cant access download mode... and even cant access Recovery mode...
info2shail2010 said:
Nope.. all things failed..... i made 3 USB jigs... ( wasted 3 data cables ) ... but failed...
then i purchased a ready-made USB Jig from eBay... and tried but again failed....
now the situation is i cant access download mode... and even cant access Recovery mode...
Click to expand...
Click to collapse
I'm so sorry to hear that. I suggested you that option because the user @Baracs was successful in forcing open his Ace's Download Mode using USB Jig. Here is the thread,
USB Jig for Ace
Guess it doesn't work sometimes
Hi guys, newbie here trying not to brick my s3 mini any more than it is.
It all started with the lack of mobile signal, so i changed the sim card-didn't work
After a hard reset it got worse, as i got a black popup on my screen :
PDA: I8190XXAMG4
Phone : XXXX
CSC : NONE
H/W : Not Active
EF Cal Date : NONE
SMD : 01N, PBA : 04N
CAMERA : N/A, FrontCam : N/A
TSP : 0X11
TSK : 0x19
Band : GPRS, CH : N/A
UART : N/A, USB : N/A
Also, the phone will not go in recovery mode anymore, only on download mode.
I tried flashing a stock firmware with Odin, but no change. The thing is, after the phone restarts, it loses any settings i made (like wireless password, google account, etc), so if i check USB in debugging mode, after restart it will be unchecked again, so for that reason i'm not sure if the reflashing worked.
In download mode it says:
custom binary download: no
current binary:Samsung official
system status: official
At the bottom of the page: HW REV: 0x5
As far as I understand after reading the forum for about 8 hours, i've lost the partitioning of the device.
If any of you has any idea what i could do, please advise.
there are a few threads on how to fix your problem
some more reading involved
efaustino84 said:
there are a few threads on how to fix your problem
some more reading involved
Click to expand...
Click to collapse
Can you please be more specific?
i"ve been looking through the topics and couldn't find anything.
Getting a bit desperate here...bought the phone a couple of weeks ago and i don't really afford another one
Can anyone please help me?:crying:
kstk said:
Can anyone please help me?:crying:
Click to expand...
Click to collapse
refer to the threads on loading stock ROM using ODIN
those will provide you with the information to repair the phone in it's current state
you will then be able to fix the partition
Ok. So I tried numerous times to upload the stock software but absolutely nothing happens, even if ODIN says that the upload was successful. As soon as the phone restarts, it loses any settings i had done, including USB debugging mode, so maybe this is why it doesn't work. I tried selecting a CSC, but after restart it's still:''none''.
The thing is that wireless is working, so i can connect to internet, but i cannot download and install anything (no space). I will try and download an emulator via PC and put it on a memory card.
Of course, it won't read my memory card :|
kstk said:
Of course, it won't read my memory card :|
Click to expand...
Click to collapse
post a screen shot of the options you have enabled when loading via odin
efaustino84 said:
post a screen shot of the options you have enabled when loading via odin
Click to expand...
Click to collapse
here it is
kstk said:
here it is
Click to expand...
Click to collapse
all settings are ok, so flash it via Odin
AND start Odin as Admin dude
I even tried with a pit file and re-partition checked. No result.
Just flashed again with Odin started as admin. No change.
kstk said:
Just flashed again with Odin started as admin. No change.
Click to expand...
Click to collapse
i had similar problems a few months ago. So what did i do:
download the " i8190_buttonenable_cwm6.0.2.7.tar " from HERE (see attached files) and flash it via Odin (as admin)
download This rom "I8190 серв. укр.rar" from the same side and follow the instructions.
you will get a branded lafleur rom (russian), set it to your language at setup.
put any rom as zip you like on your device.
reboot into recovery with vol. up + home + power
fullwipe and flash any rom (as zip) you want.
HTH
MJ
JackoMJ said:
i had similar problems a few months ago. So what did i do:
download the " i8190_buttonenable_cwm6.0.2.7.tar " from HERE (see attached files) and flash it via Odin (as admin)
download This rom "I8190 серв. укр.rar" from the same side and follow the instructions.
you will get a branded lafleur rom (russian), set it to your language at setup.
put any rom as zip you like on your device.
reboot into recovery with vol. up + home + power
fullwipe and flash any rom (as zip) you want.
HTH
MJ
Click to expand...
Click to collapse
Just tried that, it didn't work. It's like i didn't do anything at all.
I just can't write anything on this thing
Anyway, thank you very much, guys. Any more ideas are welcome :
Was i supposed to have F. reset time checked as well?
JackoMJ said:
all settings are ok, so flash it via Odin
AND start Odin as Admin dude
Click to expand...
Click to collapse
actually given the fact that he has lost the partition those setting are not enough in my opinion
i would say load up the pit file as well as enable re-partition
efaustino84 said:
actually given the fact that he has lost the partition those setting are not enough in my opinion
i would say load up the pit file as well as enable re-partition
Click to expand...
Click to collapse
I did load the pit file and enabled the re-partition. It just doesn't change anything.
This last week it was taken back to the place i bought it from (pawn shop ), and of course, they all say (the experts they took it to) that i did something to it, and it can't be fixed, and of course it's my fault.All i did was to reset it.
Anyway, I'm still hoping to get it fixed myself, with your help, guys.
Thanks.
kstk said:
I did load the pit file and enabled the re-partition. It just doesn't change anything.
This last week it was taken back to the place i bought it from (pawn shop ), and of course, they all say (the experts they took it to) that i did something to it, and it can't be fixed, and of course it's my fault.All i did was to reset it.
Anyway, I'm still hoping to get it fixed myself, with your help, guys.
Thanks.
Click to expand...
Click to collapse
Is it booting normaly or just download mode?
Sent through time and space from my s3mini/CM11
tys0n said:
Is it booting normaly or just download mode?
Sent through time and space from my s3mini/CM11
Click to expand...
Click to collapse
It is booting normally, but it takes very long to boot.
kstk said:
It is booting normally, but it takes very long to boot.
Click to expand...
Click to collapse
You still got that FactoryApp popup on screen?
Are you rooted?
Can you enter recovery? If so, what recovery do you have?