[Q] NFC no longer turns on (Sinless ROM and ARHD 12.1) - One (M7) Q&A, Help & Troubleshooting

Hi, so I'm having trouble getting my NFC to turn on on both ROMs (sinless 2.2.6 and ARHD 12.1). The option is there and when I click on the option to turn it on, it goes gray as if enabling but exiting the settings app and returning, the option is left unchecked.
I did a full wipe before flashing either ROM and I get the same problem. I haven't flashed a stock version yet, as I haven't had the time. Has anyone experienced similar problems? Any solutions I can try before downloading/flashing a stock Sense ROM?
Thanks.

Im having the same problem with my note2
Sent from my SGH-I317 using xda app-developers app

Related

Question about [ROM GNEXUS PORT] JRO03L 4.1.1 RC10 [official jelly bean stock rom]

Hello,
I want to ask about that rom, i relly like it but i have problem with my WIFI adapter
It can not be turned on, and when i turn it on it stays tahat way for some time and never get on.
where can i change the wifi adapter setting, i assume android couldnt find the wifi or something like that?
Thanks in advance,
Hi,
Can anyone help me please ??
How can i get my wireless work in this rom?
Regards,
Did you check the wifi in the "Settings" menu? You should be able to see your wifi network. I'm using the same rom. I Initially ran into problems with my IMEI but managed to solve it after a few hours of searching and messing with the phone.
Sent from my GT-P7500 using xda app-developers app

[Q] C-ROM mix 6.0 phone changes its settings by it

HI,
This problem starts about one day after the installation of the rom.
It changes it's settings without any reboot.
It the sound, keyboard, vibrant settings be the only settings changed it would not be a problem but that's not all.
The icon space for the status bar on the left from WiFi, Signal, bater etc is not showing any staff.
The middle button is not working at all.
The sound for the incoming messages and notifications is not working.
There is no notification for the incoming calls
After a hard reset the phone works fine for a noter 30 hours and "crashes" again.
Can this problem by in any way repaired ?
I've been using C-RoM Mix v6 since the 1st day of its release and I'm not experiencing any of the problems you mentioned. I suggest you re-flash the Rom with full wipe plus format /system. If you came from GB, it is recommended to flash a CM9 ICS first before C-RoM to avoid any post-installation problems.
Sent from my GT-I9000 using xda app-developers app
Hi, I was using C-ROM Bean before(starting from 2.0)and I newer had this problem. Each time I'm installing a new version, I do it from GB>CM10>C-Rom. Each step is followed by a factory format and data and cache wipe.
I've change the Bean(in 2.4 ver.) version to Mix(6.0), because of the a gps problem.
Could this be because of the CM10(nightly version) I'm installing before the C-Rom ?
Yes that might be the cause of your trouble. The recommended way is to flash CM9 before C-RoM. I suggest you re-flash as recommended.
Sent from my GT-I9000 using xda app-developers app

Black Screen Camera Issue

I just got my HTC One for AT&T two weeks ago,
rooted and installed the following
-TWRP
-SuperSU
-bulletproof Kernel/ROM
Whenever I start the camera application, the whole screen is black and the on screen buttons are greyed out.
I've tried to install a stock boot.img and reinstall the Bulletproof Kernel and the same happens.
I've tried the solutions listed on the thread to delete 3 specific files in the zip with no avail. The latest version, 1.10 is supposed to address the camera issue with a camera fix, but I tried it and its still the same.
Reference threads:
Guide I used: http://forum.xda-developers.com/showthread.php?t=2273376
Bulletproof thread: http://forum.xda-developers.com/showthread.php?t=2233665
Can anyone help please?
You're on the stock ROM?
If so, you don't need the camera fix, you need the original files. If you have a backup, restore /system and you should be good to go.
flar2 said:
You're on the stock ROM?
If so, you don't need the camera fix, you need the original files. If you have a backup, restore /system and you should be good to go.
Click to expand...
Click to collapse
Don't have a backup, and when I'm on the stock ROM, it says "Unable to start the camera" and when I'm on Bulletproof Kernal, the camera is all blacked.
Isn't the original files the stock boot.img?
P.S. Sorry, new to this.
Try using a different kernal it might fix the problem, worked for me.
adz3d said:
Try using a different kernal it might fix the problem, worked for me.
Click to expand...
Click to collapse
I can't put my kernel inside my HTC One's storage because it says Cannot copy item. The device has either stopped responding or has been disconnected. I just factory resetted and the camera problem is still present.
Bulletproof on 4.1.2 camera issue!!!!
i am running into this exact same issue, black camera screen of death
i've tried installing all bulletproof kernals from 1.0 to 2.1
(compatable with my AT&T, android 4.1.2, sense 5)
HAS ANYONE BEEN ABLE TO SUCCESSFULLY INSTALL THIS BULLETPROOF
KERNAL ON AT&T, android 4.1..2
???
if you have, please help.
which version of the kernel did you install?
what settings did you use?
maybe i'm doing something wrong, i'm somewhat new to rooting,
before i install a "new" kernel, do i have to do anything so that it overwrites the previous properly?
thanks
AJ
As Flar2 said you don't need the camera fix on stock, reflash Bulletproof and uncheck the option to apply the camera fix.
Ok, thanks, i will give it a shot.
Noob question, if im reflashing a kernel,
(Using TRWP)
Do i have to do anything special? Or will these kernels automatically overwrite?
Thanks!
Sent from my HTC One using xda premium
black screen camera issue
Hey can someone help me fix this please.
I got my HTC one phone and I
Unlocked the bootloader
Rooted
Installed supersu
And a kernel elementalx
There's something with the camera after I did the installation later
For like a few hrs and when I opened the camera app
To check everythine if it's ok. And I got this issue. A black screen on my camera when I open it
I don't know what to do next. Please help me is there a way to fix.
I can only think of unrooting my HTC one. But I don't know it will work.
But please developers help. It's not nice to just leave someone for ex. In a desert struggling.
Please help me. And help the other people who have this problem.
superdev151 said:
Hey can someone help me fix this please.
I got my HTC one phone and I
Unlocked the bootloader
Rooted
Installed supersu
And a kernel elementalx
There's something with the camera after I did the installation later
For like a few hrs and when I opened the camera app
To check everythine if it's ok. And I got this issue. A black screen on my camera when I open it
I don't know what to do next. Please help me is there a way to fix.
I can only think of unrooting my HTC one. But I don't know it will work.
But please developers help. It's not nice to just leave someone for ex. In a desert struggling.
Please help me. And help the other people who have this problem.
Click to expand...
Click to collapse
Dont panic, i cant say for sure, but all i did to resolve my black camera issue (ran into same problem myself aftr i installed the bulletproof kernal on stock rom) ...was i installed the Android Revolution HD ROM (FOR HTC ONE) and all my troubles were resolved!
U can find it here on XDA forums
Sent from my HTC One using XDA Premium 4 mobile app
Hey I got your message and what version of android are u on. I'm on 4.1.2. Is that compatible to download with it(android evolution hd) rom. Or there's a 4.1.2 version for HTC one android evolution hd Rom. Thanks for suggestion.
Sent from my HTC One using xda premium
I was originally 4.1.2 also...when i unlocked boot & rooted my phone. Then i installed the android revolution HD which is basically 4.2,...worked like a charm aftr i installed. Are u using TRWP? Make sure u run a backup prior (just in case) but i have had zero problems with android rev. hd
Sent from my HTC One using XDA Premium 4 mobile app

[Q] Poor Call Quality after 4.4.2 update

Is anyone else experiencing poor call quality since upgrading to 4.4.2? I can hear just fine, but the user on the other end says it is VERY quiet and I have to yell into the phone for it to sound normal. it only seems to have happened after I updated to ARHD 4.4.2. I have also tried InsertCoin's latest revision and got the same result, even after using the Aroma option to disable the noise suppressor. I'm hoping I dont have a dud.
Was it normal before you updated?
That's weird because I didn't have any such issues. Try a factory reset may be ?
Sent from my HTC One
No issue here
No issue at all on Skydragon 9.3
Must be your phone.
I'm on SinLessROM and all is up and running. Maybe try a GPe ROM see how it goes. Update your favorite custom recovery, full wipe and reflash. Maybe even try to update firmware. Just giving you options dude! :silly:
No such issue here, I had stock 4.4.2 now I'm MaximusHD ....both didn't have any problems
Sent from my HTC One using xda app-developers app
Thanks for all the replies. I tried every possible firmware/rom/reset combination - all with problems. I assume it was just coincidental I noticed it after the 4.4.2 update.
Returned it back to stock using the guides here on XDA and I have my replacement from AT&T

[Q] [HELP] No Vibration after update on ViperOne 6.x

After i updated my ViperOne rom from 5.x my phone lost every vibration functionality.
I tried it with different installment methods (with and without wipe, stock kernel, bulletproof kernel etc).
Does anyone have a hint for me how to get the vibration functionality back?
Cheers
kamothegamer said:
After i updated my ViperOne rom from 5.x my phone lost every vibration functionality.
I tried it with different installment methods (with and without wipe, stock kernel, bulletproof kernel etc).
Does anyone have a hint for me how to get the vibration functionality back?
Cheers
Click to expand...
Click to collapse
Try with few other ROMs to rule out hardware problem
Definitely try a few different ones. It could be a hardware failure. Mine didn't last long before it totally failed
Sent from my GT-I9305 using xda app-developers app

Categories

Resources