[Q] LED does not work with Bulletproof and ARHD - One (M7) Q&A, Help & Troubleshooting

I flashed Arhd 12.1 and Bulletproof 3.4 on my device, now my Led Notification doesn't work anymore at all. Any Suggestions how i can get it to work again ? Or is it just not possible ?

Does your LED work while charging?
I found that on my old desire HD, after flashing a new rom, the notification flash settings in display settings were all switched off. Simply re-enabling these solved my problem.

Thanks for answering. Yes the led worked while charging (red/green). But the notification led blinking didn't worked. i checked the settings for the led notification so that wasn't the problem. Now after a few hours it suddenly started working, i don't know why, i didn't changed any settings.

That's strange.
ROMs can be a bit random during the first few hours of usage, at least from my experience.
At least you managed to get it working properly now which was the initial problem!

Related

[Q] Does 2.3.4 fix the internment notification light and blank keyboard?

I'm currently using a custom 2.3.3 rom that's giving me some trouble as is and I would like to go back to stock. The only real thing that's holding me back is the notification light.
Does 2.3.4 fix the notification light? Previously it would only blink if the notification was received while the screen was off, and once you turned the screen on it would stop. I'd prefer it to blink until I addressed or cleared the notification.
Also, as a bonus, does 2.3.4 reliably fix the pmem blank keyboard issue? Or will I still have to restart my phone ever ~24 hours?
I think that the notification light hasn't been "fixed" (not sure they deem it as a problem). I know that feature has been included in CyanogenMod for quite a while.
2.3.4 in the cyanogenmod nightlies seems to fix the pmem issue. I haven't had it since CM incorporated 2.3.4 into the nightlies. Now I am guessing the fix came from google, but I don't know for sure.

Notification LED

Hi,
is there a possibility to change the notification-led settings? Like that the LED should shine instantly or blink so long till i unlock the phone?
Thanks...
(I´ve the One for 2 days now and want to install TrickDroid)
There's not much you can do with the led
And you should flash trickdroid
Hmm, but why? Is it not possible to change the kernel "a little bit" so you can config the led?
You can download a led app from Google play but you got to be rooted it doesn't work very well
There's also LightFlow, but apparently there's some serious compatibility issues with the One at the moment. Perhaps when there's an update.
so as of right now, there is no way to extend the duration of the flashing led notification without rooting? it really doesn't make sense that it would turn off after a few minutes. it seems obvious that it should remain blinking until you've viewed the notification...or is it just me? can this be done if the phone has been rooted?

[Q] Having some problems maybe after 4.3

Hi there everyone
I bought my HTC One just one week before. I was using it without any problem since yesterday. Yesterday I updated my HTC to official JB 4.3 and sense 5.5 . Then few hours later I figured out a dead pixel at the bottom of the screen. I have started worried about it because I had just bought it, the phone was just for one week. And then another problem occured, the notification leds started not working properly. For instance; when I plug the charger to phone, the orange notif. works good and when the battery is full, it blinks green without any problem. But when there is a miss call or an unread message it sometimes blinks sometimes not. And for Whatsapp, it never blinks. I tried the test settings for the leds, they were working properly. I don't know if all this problems occur because of 4.3 and sense 5.5, I am just trying to comment on it.
What do you suggest me for the dead pixel and for the notification led problem?
007jami said:
Hi there everyone
I bought my HTC One just one week before. I was using it without any problem since yesterday. Yesterday I updated my HTC to official JB 4.3 and sense 5.5 . Then few hours later I figured out a dead pixel at the bottom of the screen. I have started worried about it because I had just bought it, the phone was just for one week. And then another problem occured, the notification leds started not working properly. For instance; when I plug the charger to phone, the orange notif. works good and when the battery is full, it blinks green without any problem. But when there is a miss call or an unread message it sometimes blinks sometimes not. And for Whatsapp, it never blinks. I tried the test settings for the leds, they were working properly. I don't know if all this problems occur because of 4.3 and sense 5.5, I am just trying to comment on it.
What do you suggest me for the dead pixel and for the notification led problem?
Click to expand...
Click to collapse
Well if you have a dead pixel that's an hardware issue and your carrier should be able to exchange it.
attanasi0 said:
Well if you have a dead pixel that's an hardware issue and your carrier should be able to exchange it.
Click to expand...
Click to collapse
So what can you say for the notification problem?

Led not lighting up for notifications

Just got the Nexus 6 a few days ago. I could have sworn that before I unlocked the bootloader, installed TWRP, and rooted that when I got a text or email the LED would blink. The last day or so I noticed it isn't blinking when I get a notification. Any help is appreciated. Thanks
I understood that although there is an LED under the top speaker it isn't activated. The only solution I remember seeing is using Lightflow on a rooted device. Are you sure your memory isn't playing tricks?
I don't believe the LED on this device has the ability to flash, just stay solid when active. Stock doesn't have this enabled, I have seen the setting to activate the LED in CM 13, but when I've used it there, it just stays solid when a notification comes in. I've never tried Lightflow so I do not know if that can flash the LED or not.
You can do software based flashing through lightflow but, it is a bit janky and has random intervals. Solid is probably what you want to do with the nexus since it isn't supported by the hardware (that's my understanding at least). In response to the OP, there is really no way you had the LED flash without having root
Only custom ROMs or being rooted allows activations of the LED. By default it is not used.
I ended up flashing Pure Nexus rom and it has the led enabled but it is solid only. Works for me. Thanks for the reply's guys.
And it is quite possible my eyes were playing tricks on me. I was transferring stuff from my old phone and maybe I mistook a notification on my old phone for the new one.

LED disfunctional after OOS 4.0

Anyone else having this issue after updating to Nougat?
My LED will not work in any situation whether it'd be charging light or a notification. Unsure why...
Mine is working. Try to flash a full 1.4GB zip and then do a factory reset.
Hazzy28 said:
Anyone else having this issue after updating to Nougat?
My LED will not work in any situation whether it'd be charging light or a notification. Unsure why...
Click to expand...
Click to collapse
Same problem, no LED after update.
Same Problem, no LED's, LED Notification Grayed out in menus
Bionic Toad said:
Same Problem, no LED's, LED Notification Grayed out in menus
Click to expand...
Click to collapse
From OOS 4.0 like the original post? If so, try a more recent update. There are many, since 4.0 is over 9 months old. Try to install the full update zip.
If not OOS 4.0, then it's best to avoid just saying "I have the same problem" without providing the proper details.
Same problem. Currently testing OOS 4.5.0, LED doesn't work, even with GravityBox or LightFlow. Only charging works, notifications doesn't, it's like the device had no diode.
I miss the stability of OOS 3.5.4, everything worked there. You see, the newest isn't always the best.
Edit: it started to work with GB on itself. LED blinks now.

Categories

Resources