Hello,
I've decided to root and unlock my P880 to install a custom rom.
I'd prefer to use it with a fast, stable Kernel. The WerewolfJB kernel v007 looks good.
My question is:
Can I use that Kernel with CM 10.1.2 or will it cause any problems? The thread mentions that the kernel is made for the 10.1 Nightlies.
Thanks.
xbxsxi said:
Hello,
I've decided to root and unlock my P880 to install a custom rom.
I'd prefer to use it with a fast, stable Kernel. The WerewolfJB kernel v007 looks good.
My question is:
Can I use that Kernel with CM 10.1.2 or will it cause any problems? The thread mentions that the kernel is made for the 10.1 Nightlies.
Thanks.
Click to expand...
Click to collapse
In CWM Recovery, Install CM stable or Nightly, Flash Gaaps, Install Werewolfs Kernel v007 and reboot the system.
After success reboot the phone once again.
(make a nondorid backup of your current Rom in case)
Good Luck.
sPEADy said:
In CWM Recovery, Install CM stable or Nightly, Flash Gaaps, Install Werewolfs Kernel v007 and reboot the system.
After success reboot the phone once again.
(make a nondorid backup of your current Rom in case)
Good Luck.
Click to expand...
Click to collapse
Done that.
Danke
These are my screenshots of my phone using cyano with werewolf kernel. Y expect that these photos can help you
Sent from my LG-P880 using xda app-developers app
Related
Well I've been using Froyo 2.2 v23b and I wanted to test some roms.
I installed CM 7.1 and when I wanted to go back on the Ginger-DX v17 the first time was good and I replaced the official CM 7.1 kernel for the FXP 030.
The problem is when I had to reinstall the GDX rom for some bugs and now it gets stucked on FXP logo and don't run the rom but I still have acces to the CWM menu.
I attempted to put some kernels (stock version, CM 7.1 official and the FXP 030) but no one works
Would you guys help me?
Nice way to start posting >.< I'm sorry
Full wipe after you change rom or stuck in boot loop.
You'd better go back to stock kernel, the FXP kernel is actually only for their Rom.
Because their kernels are not tested on other roms... I think.
Well I have to say thanks for your support for you.
What I have done is flash the latest SE firmware with flash tool and at the moment it's working.
Thread closed
Hello everyone,
I want to know how to update CM7 to latest nightlies without waiting devs to make an update to the ROM.
Im using GingerDX.
Is it just flashing the cm7 zip in CWM? Which file to download from official CM7 site.
Any idea is welcome.
http://cm-nightlies.appspot.com/?device=shakira
Install only rom, not kernel.
Use one of FXP028 FXP030 or stable CM71 kernel.
Means i download the nightly zip and flash in cwm, thats all?
Why need to flash kernal?
nAa's kernel seemed to be working fine also with CM nightly
i would like to know how too...
Can u explain? I dont want any kernal, i just want CM7 nightlies. Im using stock kernal.
rav3n_pl said:
http://cm-nightlies.appspot.com/?device=shakira
Install only rom, not kernel.
Use one of FXP028 FXP030 or stable CM71 kernel.
Click to expand...
Click to collapse
Only those kernals work? Im using stock kernal.
How to install the rom? flash using cwm?
Custom kernels works only with unlock bootloader.
CM7 rom doesn't work on stock kernel. Only on custom kernel.
If your bootloader is unlock, the best kernel for CM7 right now is either nAa's kernel or fxp028/030 as mentioned previously.
But cam is vga only and fm radio doesn't work yet on CM rom.
If you still want to try CM rom, flash kernel i mentioned and install CM update zip in CWM.
Sent from my X8 using xda premium
Im using stock kernal and im using CM7 rom. In other words, i want to update cm7 like the developer.
doixanh said:
Release history
November 02 v019. Small fix.
CM Nightlies Hero 231+
Completely remove recent apps on status bar
Small gps tweak (for my personal use in France). It should have faster gps lock.
Click to expand...
Click to collapse
Does this means i have to use cm7 hero nightlies instead of shakira?
Hi, I need help with my Galaxy Note. I just buy secondhand Galaxy Note, it has XXLS2 4.1.1 rom for now. I want flash AOSPA 4.2.1 rom on it. My previous phone was HTC HD2, so I'm used to flashing without limitation So, I need your help to tell me if I'm thing good about it. So, firstly I must flash Philz kernel for my phone, to get root and recovery. But for my rom is only version 2.7... is it safe to flash? And next I can just do full wipe, reboot, and flash AOSPA 4.2.1 rom, yes?
You won't be able to flash a aokp rom using philz 2.7 as it will not install and error 7.
-Install Philz and gain root and cwm
-Then place all the required files to flash the rom to storage.
-Then flash a different safe kernel like hydracore or cm kernel.
-Boot into recovery and do wipes and formats and flash. the rom. (while on a different kernel you might not be able to boot into the rom. Just recovery)
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
sinedoOo said:
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
Click to expand...
Click to collapse
Yes 2.7 is safe. Just that it cannot install some roms.
Because it's and old kernel.
Yes stay with the kernel included in the rom
Yes PA has a safe kernel and the backup can be restored.
Any kernel like hydracore or cm will do.
Also 2.99 PA might not to that's stable. So.. Your choice. You can use and older version like 2.57 as well
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
shoey63 said:
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Need to meditate
GT N7000
hi frds i am having a issue with Amnix Xperia ROM Build 3 for GT N7000. After I installed my antivirus & later when it finished scanning for malware it gives warning about one app - MALICIOUS APP
VOODOO-INSTANT-ANTI-EXYNOS-MEM-ABUSE-0.3.APK
EXPLOIT.EXYNOS.A
can someone pls help....is it a virus....
It's already replied in the noob friendly thread
I forget to reply, sorry. Thanks! It is all working good, so I have now my Galaxy Note with newest Paranoidandroid rom
Hi there,
i got currently on my 4x: pac man rom so cwm, root, bootloader unlocked...
now i want a new kernel, so is the pac man rom compatible with an other kernel? and if, which ones are best and stable for my device and pacman rom?
And last how will I install them (most kernels i found got intruductions)..?
if i fogot some information ask
Thx
Try it out. PAC is based on three different ROMs so I don't know exactly if cm based kernels work but I would try werewolf.
You can install the kernel through cwm flash if there's a flashable zip like in the werewolfJB thread
But don't forget to make a full backup ,
just in case
Sent from my LG-P880
Omario-242 said:
Try it out. PAC is based on three different ROMs so I don't know exactly if cm based kernels work but I would try werewolf.
You can install the kernel through cwm flash if there's a flashable zip like in the werewolfJB thread
But don't forget to make a full backup ,
just in case
Sent from my LG-P880
Click to expand...
Click to collapse
Okay ty, so i'll just try it out later With the werewolf
Thx for the answer
Sent from my LG-P880 using xda app-developers app
Hey noobiei5,
werewolf kernel seems to work with pacman rom (at least for me )
You find a link to a flashable .zip in the 3rd post in the kernel thread ( http://forum.xda-developers.com/showthread.php?t=2256899 ). Make sure you choose the CM-Kernel and flash it via CWM.
If mobile data doesn't work a full wipe in CWM might help
I flash new kernel and after my phone don´t start, don´t start cwm, work only downloading.....PLEASE HELP ME !
What kernel?
Powered by CM11
jurinecko said:
I flash new kernel and after my phone don´t start, don´t start cwm, work only downloading.....PLEASE HELP ME !
Click to expand...
Click to collapse
Flash stock firmware with Odin.
I think that you installed CM kernel, maybe that Aroma installer for CM kernels on JB. CM kernel does not work on JB or GB, JB kernel do not work on CM or GB, GB kernel do not work on CM or JB. Also do not use CM10.1/2 kernel on CM11 or any combination, use kernel on ROM version that kernel is made for.