Related
Hi,
The wireless network we have at work requires us to first connect to the network (the easy part), then open a web browser (Opera) to login. In my Opera under Settings->Privacy->Password management, I've saved my username and password, however it doesn't auto-fill the form like it should on other websites. I've also had this problem on my laptop (auto-fill doesn't work), so was wondering if there's a script or software or something for me to automatically login instead of having to type in my username and password every time?
Looking at the login website, it says it's a Cisco Wireless Network (presumably that's the router used).
Thanks
dan168 said:
Hi,
The wireless network we have at work requires us to first connect to the network (the easy part), then open a web browser (Opera) to login. In my Opera under Settings->Privacy->Password management, I've saved my username and password, however it doesn't auto-fill the form like it should on other websites. I've also had this problem on my laptop (auto-fill doesn't work), so was wondering if there's a script or software or something for me to automatically login instead of having to type in my username and password every time?
Looking at the login website, it says it's a Cisco Wireless Network (presumably that's the router used).
Thanks
Click to expand...
Click to collapse
Did you try for example a MortScript-based solution? (I don't think a GET-based solution would work, instead of the default POST-based one. You can, however, give it a try too, if adding the full URL, along with your l/p, as a bookmark, isn't a problem.)
Menneisyys said:
Did you try for example a MortScript-based solution? (I don't think a GET-based solution would work, instead of the default POST-based one. You can, however, give it a try too, if adding the full URL, along with your l/p, as a bookmark, isn't a problem.)
Click to expand...
Click to collapse
The POST-based is probably the most simple solution actually - going to give that a try now on my laptop. As far as MortScript goes, I think it'll probably work, but I do need to get around to learning it first.
Quick question without going into the MortScript documentation - how would I go about either calling Opera, or ideally, send a http command through a script? I'm an engineer and part of my job IS programming, but don't program for any web-based stuff so a bit lost there...
Edit: nevermind, reading the MortScript manual now, seems fairly easy to follow, will try to figure it out myself instead of wasting people's time here
Oh, just tried the POST idea on my laptop, works great! Thanks! Now time to look at MortScript me thinks
I was wondering if there is any windows mobile software that can monitor some specific websites on http or on specific ports.
I'm a web developer with some servers which I want to check every 10 minutes if they are online, and since i always have my mobile it would be useful if i could run some program on it.
I found the following software:
- Porta+ http://portaplus.com/
This one does not work on windows mobile 6, it always says it doesn't find a data connection, even not when I use wifi or gprs
Perhaps someone has something better?
Found in the Windows Mobile MarketPlace a nice one: "Server Monitor"
Greetingz Themuzz
Email Alerts?
In my opinion, the far better option is to run some server-side monitoring package which sends out email alerts. Then use push email to your phone. Much more powerful monitoring can then be done, you can filter which alerts you want to get, and you'll still have monitoring being performed (but without the alerts) if you switch your phone off.
Nagios is one option - my preference is the free version of Big Brother (see http://bb4.org/home1.html - available in *nix or Windows versions). Both of those would do what you want - and more.
Thanx for the reply, but the problem is that I don't have a server where I can runs this sort a software, I only have dedicated servers pure for http en sql.
My phone is always on and has a internet plan so it would be easy if i could run something like porta+ on my phone.
Perhaps someone else has a solution?
Greetingz Themuzz
Ask porta+ if they can update it?
Just did, i'm wondering what their response will be.
But in the mean time, if anyone has another solution?
Well, found a nice one (after a year ) on the Windows Mobile MarketPlace. Namely "Server Monitor".
(For the people who where still searching)
Hi,
Today when I ordered my flight tickets i got a SMS with a link to see flight-information. In the browser i also got a "barcode" (QR/DR code? Im not sure).
I have tried the Marked to find an application to scan this code directly from my Android Webbrowser, but I cant find any. (Its pretty hard to use my phone cam to scan my phone screen )
Does anyone knows how?
Forward the SMS to your email account, check your email on a PC, scan the barcode from there
Hmmm, isnt there any barcode scanner that could read from the phone-display? :-((
Dont understand why WAP pages uses this kind of content if the cellphones arent able to use it straight from the phone-webbrowser?
- Kind of irritating that you have to lunch the wap page in a PC-browser and than scan the barcode. I doesnt always have my computer with me, and the reason why im using Andorid- and/or WM-OS, is just because that I could use my phone as a substitute for my computer when I dont have it around.
Tried your solution with "Barcode Scanner", but it didnt reconize it?? Maybe I have to use another type of scanner/app?
Here is the barcode (added the red line because the barcode have personal information)
Er, I was just suggesting a workaround until you found something that worked like you specified
Your QR code looks weird anyway, they usually have boxes in 3 of the corners.
Example
Its seems like my QR Code has one box only - and thats in the middle. Isn' it a QR Code maby?
Looks like the code is a DM Code: Example
nukleuzN said:
Looks like the code is a DM Code: Example
Click to expand...
Click to collapse
It's neither a QR code nor a DM code. I don't know the specific name of it, but the picture you provided above is a new bar code that, as far as I know, is only used for paperless boarding passes. I don't know about internationally, but here in the US, it's currently only available at a few dozen airports while the system is being tested. I've used it flying out of both Newark, NJ (EWR) and Atlanta, GA (ATL).
It's a special 2D barcode that contains encrypted information about your flight information, as well as some personal information to identify you. It is specifically designed to be secure so that only the TSA and the airlines can decode the information. Most likely, the reason you received it was not so that you could scan it to get information about your ticket, but so that the TSA could scan it at security and the airline could scan it at the gate. Ideally, you wouldn't then need to print out a paper boarding pass, all you would need is your phone! (I say ideally, because since it's a brand new program, not everybody's really familiar with it yet, and you get some funny looks from the gate agents sometimes!)
Nokia Lumia 920
I am having a problem with a mobile version of one website on my Windows Phone: The home page loads and displays correctly, but when you touch a link, a "server or DNS cannot be found" - error is shown. However, after hitting "refresh", the page addressed by the link is displayed fine. This is very annoying, so I reported that behavior to the web master of the site.
The suggested solutions that came in response were two:
- allow cookies all the time (I changed that setting, but it did not fix the issue)
- make sure that java scripting is enabled in the Internet Explorer
While in the regular version of IE you can adjust this setting easily through the respective menu, I couldn't find any option in the Windows Phone system or in the options of IE mobile to adjust java scripting.
Questions:
1. Can these settings be changed at all?
2. What are the java script settings in IE mobile by default?
Many thanks
Joerg
First of all, "JavaScript" - one word - is the language commonly used in websites. Java (which is not scripted, although in old versions it was interpreted much the way scripts are) is occasionally also used on the web, but very rarely.
Windows Phone supports JavaScript, and this support cannot be turned off in the browser to the best of my knowledge. Apps can turn it off within their internal WebView controls, but in IE it is always on.
Possibly a silly suggestion, but have you tried rebooting the phone? After that, my next suggestion would be trying the mobile site in IE10 on the desktop, probably using the Developer Tools to spoof the WP8 IE10 user agent string.
GoodDayToDie said:
First of all, "JavaScript" - one word - is the language commonly used in websites. Java (which is not scripted, although in old versions it was interpreted much the way scripts are) is occasionally also used on the web, but very rarely.
Windows Phone supports JavaScript, and this support cannot be turned off in the browser to the best of my knowledge. Apps can turn it off within their internal WebView controls, but in IE it is always on.
Possibly a silly suggestion, but have you tried rebooting the phone? After that, my next suggestion would be trying the mobile site in IE10 on the desktop, probably using the Developer Tools to spoof the WP8 IE10 user agent string.
Click to expand...
Click to collapse
Yes, I tried rebooting - to no avail. Opening the site in IE10 on the desktop does not work, because it automatically detects the browser and switches to the regular (instead of the mobile) site.
Meanwhile, I have encountered the same issue with more mobile sites: clicking on links causes an error. This error does not occurr when you open the site e.g. in Safari on an Ipad.
... probably using the Developer Tools to spoof the WP8 IE10 user agent string
Click to expand...
Click to collapse
I take it you're not overly familiar with how web browsers (and servers) work. I can try figuring out what the problem is if you let us know what the problematic site is, though.
Hello guys ... I dont know if this is the place to post my problem but its the only one that is close to what I have as an issue... So .. I have a problem with some active buttons in some sites, when I log in the site there are little active buttons on the top of the page ( account, community, forum, etc. ) so when I try to click on those buttons the phone ( lumia 920 ) just selects the text and gives me the option to copy it. I have few android devices and there is no such issue with them, I dont know if this is connected with the java script or flash or what ever ... I just need some help if there is a fix for this. THX in advance and have a happy new year :good::good::good:
If possible, tap off the text but still on the button (zoom in if you need to). You could also try tapping more quickly, or alternatively tap-and-hold and see if it offers you the context menu for links.
Does any one know the registry settings to enable internet sharing?
There's a small collection of them, what isn't working about it on your phone? If it's something like the mobile operator permission check, then yeah, we can bypass that.
GoodDayToDie said:
There's a small collection of them, what isn't working about it on your phone? If it's something like the mobile operator permission check, then yeah, we can bypass that.
Click to expand...
Click to collapse
Really? I missed that. Is that in a thread somewhere?
I have the Samsung Ativ S Neo from Ssprint.
-Tdecision10
There are a number of threads about Internet Sharing and about registry tweaking. The requirement for tethering to be enabled on your account is checked by a mobile operator-specific DLL that is used by ICSSVC (the Internet Connection Sharing SerViCe). There's a registry value that tells the phone what DLL to load, or whether to load any. If you don't tell it to use any, it defaults to assuming you have access.
There are a number of ways to make registry changes on your phone. You can flash a custom CSC (not a full ROM, though if you look for "custom ROM" on the dev&hacking subforum, you'll find stuff about it), or you can edit the registry directly using a hijacked app chamber, or you can interop-unlock (itself requiring a registry edit, so you probably need to use the chamber hack unless you're on an old version of Samsung's firmware) and unblock RPC, then use the RPCComponent.
GoodDayToDie said:
There are a number of threads about Internet Sharing and about registry tweaking. The requirement for tethering to be enabled on your account is checked by a mobile operator-specific DLL that is used by ICSSVC (the Internet Connection Sharing SerViCe). There's a registry value that tells the phone what DLL to load, or whether to load any. If you don't tell it to use any, it defaults to assuming you have access.
There are a number of ways to make registry changes on your phone. You can flash a custom CSC (not a full ROM, though if you look for "custom ROM" on the dev&hacking subforum, you'll find stuff about it), or you can edit the registry directly using a hijacked app chamber, or you can interop-unlock (itself requiring a registry edit, so you probably need to use the chamber hack unless you're on an old version of Samsung's firmware) and unblock RPC, then use the RPCComponent.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=54929482&postcount=13
http://forum.xda-developers.com/showpost.php?p=54652850&postcount=575
I followed and did everything posted in these but I'm still not sure if there was a solution for s print.
"and unblock RPC, then use the RPCComponent. " I think this is the part I need to be educated on.
-tdecision10
That is one (of several) methods for editing the registry. It can write more places than the other methods, but only works on Strings and Integers (DWORDs) and is only usable on Samsung phones. It requires that your process have ID_CAP_INTEROPSERVICES, which many OEM apps (and some first-party ones, like Skype) have, but which is not normally available to sideloaded apps.
"Unblock RPC" is the term we use for telling a Samsung service that it's in test mode by placing a file named "Non-production errors.txt" in the Documents folder of the phone. This will allow using RPCComponent anywhere in the registry, instead of just in a few specific places. Search for "unblock rpc" to learn more.
RPCComponent is a Samsung-provided native (C++/CX) DLL and WINMD for accessing various privileged functions by means of a high-privilege RPC (Remote Procedure Call) server. It is not publicly available but is bundled in many of Samsung's OEM apps and is available on this forum inside most .XAP files intended for use on Samsung phones (such as my own BootstrapSamsung tool; see the interop-unlock thread). As mentioned above, you need ID_CAP_INTEROPSERVICES for it to be useful.
GoodDayToDie said:
That is one (of several) methods for editing the registry. It can write more places than the other methods, but only works on Strings and Integers (DWORDs) and is only usable on Samsung phones. It requires that your process have ID_CAP_INTEROPSERVICES, which many OEM apps (and some first-party ones, like Skype) have, but which is not normally available to sideloaded apps.
"Unblock RPC" is the term we use for telling a Samsung service that it's in test mode by placing a file named "Non-production errors.txt" in the Documents folder of the phone. This will allow using RPCComponent anywhere in the registry, instead of just in a few specific places. Search for "unblock rpc" to learn more.
RPCComponent is a Samsung-provided native (C++/CX) DLL and WINMD for accessing various privileged functions by means of a high-privilege RPC (Remote Procedure Call) server. It is not publicly available but is bundled in many of Samsung's OEM apps and is available on this forum inside most .XAP files intended for use on Samsung phones (such as my own BootstrapSamsung tool; see the interop-unlock thread). As mentioned above, you need ID_CAP_INTEROPSERVICES for it to be useful.
Click to expand...
Click to collapse
I interop-unlocked (all-capabilities) my phone using methods you've posted. This was earlier in the year sometime.
http://forum.xda-developers.com/showpost.php?p=54929482&postcount=13
I followed this closely but didn't see any finality.
I just added the Non-production errors.txt in the place noted on that relative thread.
Not sure what to do next.
Forgive me if I am being a bother.
-tdecision10
Yeah i'm completely lost. The EnableAllSideloading XAP won't deploy for me (The manifest could not be loaded and may not be valid) so I can't even full unlock, and I have no clue how to go about using the MBN creator. So if you could hold my hand, I'd love it....
okay so I figured out MBN creator (kinda) but I still need to know the proper reg settings to disable the carrier authorization check.... i.e. the setting that points to the carrier specific DLL you mentioned...
EnableAllSideloading doesn't work on WP8.1 because they changed the security on the registry key where it operates. If you can't sideload it, that's because you're not interop-unlocked at all.
MBN Creator should, in theory, not require any particular customization unless your operator requires it; the *default* state of the Internet Sharing feature is "no restrictions, enabled by default". Several people have reported that IS started working after they flashed a custom CSC even though that CSC had nothing to do with IS, just because it removed the carrier-specific customizations that were present (and were blocking IS from working) before.
@tdecision10: If you are or were able to capability-unlock, then you can just sideload any registry editor tool you want and use that. Some of them are better than others, of course. A handful of apps, like WPTelnetD (https://github.com/FurballTheGreat/WPTelnetD/releases), ship with almost no capabilities so that they can be sideloaded on any phone, but you could unpack the XAP and edit the capability list before installing if you want to. A capability that gives access to the relevant registry key is ID_CAP_RUNTIME_CONFIG.
GoodDayToDie said:
EnableAllSideloading doesn't work on WP8.1 because they changed the security on the registry key where it operates. If you can't sideload it, that's because you're not interop-unlocked at all.
MBN Creator should, in theory, not require any particular customization unless your operator requires it; the *default* state of the Internet Sharing feature is "no restrictions, enabled by default". Several people have reported that IS started working after they flashed a custom CSC even though that CSC had nothing to do with IS, just because it removed the carrier-specific customizations that were present (and were blocking IS from working) before.
@tdecision10: If you are or were able to capability-unlock, then you can just sideload any registry editor tool you want and use that. Some of them are better than others, of course. A handful of apps, like WPTelnetD (https://github.com/FurballTheGreat/WPTelnetD/releases), ship with almost no capabilities so that they can be sideloaded on any phone, but you could unpack the XAP and edit the capability list before installing if you want to. A capability that gives access to the relevant registry key is ID_CAP_RUNTIME_CONFIG.
Click to expand...
Click to collapse
Okay, I put Pasquiindustry CustomPFD on my pc unzipped it added that capability in the WPAppManifest. xml file, rezipped it but now it won't deploy.
Did I think it was too simple?
EDIT:
For Spr int, I think I need to figure out how to do this:
TetheringNAIConnection
Optional. Specifies the CDMA TetheringNAI Connection Manager cellular connection that internet sharing will use as a public connection.
If a CDMA mobile operator requires using a Tethering NAI during internet sharing, they must configure a TetheringNAI connection and then specify the connection in this node.
Specified connections will be mapped, by policy, to the internet sharing service. All attempts to enumerate Connection Manager connections for the internet sharing service will return only the mapped connections.
The mapping policy will also include the connections specified in the DedicatedConnections as well.
(This is the error I get)
If the specified connections do not exist, internet sharing will not start because it will not have any cellular connections available to share
Anyone know how to add this to the APN settings?
-tdecision10
well, i reverted to 8.0 and then updated to 8.1 via retail without thinking.... so i got the new firmware and took myself out of the game :crying:
edit: reverted back to 8.0 again and i have the old firmware again. i think using the mbn creator is key. with older versions of windows phone, the APN settings were all built into the rom. now they are provisioned OTA. everytime i change the CSC, the device fails the authorization check with sprints servers and the device doesn't provision itself. what we need is the provxml that contains all of sprints APN settings. I used to have this information in a kitchen for WM 6.5, but sadly, I deleted it a long time ago. i can currently do one thing or another, unlock internet sharing but have no data connection, or, have a data connection with internet sharing locked. i believe that i can make a custom CSC with all the necessary edits but I need to get my hands on the correct sprint provxml first. I've tried and tried to find an old kitchen for Sprint with the correct files in it, but because it's so old most of them are dead download links. I think even a stock RUU for the GOLD_C (Sprint's HTC Arrive) would do. If anyone has this or can track it down I think we'd be in business....
@GoodDayToDie thanks for all the input, it's really helpful. I think that most people have found success by simply changing their CSC because their phones are not CDMA. we've got all these extra restrictions that keep the technology from working automatically
also, i believe that if I could manage to somehow get my MSL unlock code, I could manually program the APN. problem is, CDMA Workshop can't read it, and the free version doesn't let you use the brute force option to find it. Sprint changed their policy in October to under no circumstances giving out the MSL code unless your contract is up. I'm going to continue to keep trying different tech support reps to see if I can get one of them to give it up.
@tdecision10 I'm getting close, but I REALLY need those WM 6.5/7 Sprint OEM packages..... if you know of anyone or come across it browsing it would be immensely helpful!
mtstmp, I have leadpoizon's old rom for HTC Arrive. Let me know if that will work and if so, how to get it to you.
-tdecision10