Every time I try to send a mms on stock message app, I keep getting failure to send. I only get this error when I am on mobile network, but I go on wifi it works just fine. I am using 42one rom now but I was having this problem on stock rom as well. Wondering if anyone has any solution for this problem?
Did you try updating profile and prl?
Sent from my lair.
volk9029 said:
Did you try updating profile and prl?
Sent from my lair.
Click to expand...
Click to collapse
I keep getting a failed to update on either one. I don't think 42one can get those update. I will flash my back up of my stock rom amd see if that does it.
Well I updated my profile and prl and didn't seem to help. Maybe it's the tower I'm using, since sprint is supposedly upgrading them in my area.
Update 1: installed handcent and sends them fine.
Update 2: I just updated the firmware with the new radio and seems to be fine now.
Related
Does anyone have PRL 60667?? Ive heard this is the latest one....or just anything newer than PRL 60663??
I'm using PRL 60667.
I'm also ussing 60667
Sent from my HERO200 using XDA App
go to settings and update the prl that way
I'm using 60667. I flashed an earlier Fresh rom and updated my PRL then nandroided back to Darchdroid 2.7.
Sent from my Hero CDMA using XDA App
Yes, you can't update using the settings menu on an AOSP ROM, as far as I know. You need to flash to a ROM based on the Sprint leak, update and then re-flash if you so choose. I'm running DamageControl 2.09.1, so it let me update through the menu.
can someone upload the 60667.prl (file) for manual installation? I am unable to download regardless of rom.
same here, I get an error while doing my PRL update, Im using Fresh's latest release (Fresh Rom 2.3.3) and i get an error message of
"PRL could not be updated, Please try again later. If the problem persists,you maybe need to contact Customer service. Error code:1012"
I dont mind installing it manually as i learned how to last night and really F'uped my phone but i fixed it and now I have PRL 60664 but i would like 60667.
If you could post the file or guide me to fix the update PRL automaticly
i literally just did it with freshs newest and it worked fine, 60667
If you are consistently unable to update your PRL regardless of the ROM you are using, the problem likely lies within your account information at Sprint. They need to remove and re-add your phone to your account.
You can try to do this manually by activating another phone on your account (e.g., your old Sprint phone, whatever it may be), waiting 15-20 minutes, then re-activating your Hero.
Been there, done that. My PRL updates work now.
BAttitude7689 said:
same here, I get an error while doing my PRL update, Im using Fresh's latest release (Fresh Rom 2.3.3) and i get an error message of
"PRL could not be updated, Please try again later. If the problem persists,you maybe need to contact Customer service. Error code:1012"
I dont mind installing it manually as i learned how to last night and really F'uped my phone but i fixed it and now I have PRL 60664 but i would like 60667.
If you could post the file or guide me to fix the update PRL automaticly
Click to expand...
Click to collapse
I followed this and was able to update when I was getting the above error. This was on Fresh 2.1.2 so I'm not sure if it works with the latest.
Can't post links... Its in the Fresh 2.3.3 ROM thread, post #1100.
x99percent said:
If you are consistently unable to update your PRL regardless of the ROM you are using, the problem likely lies within your account information at Sprint. They need to remove and re-add your phone to your account.
You can try to do this manually by activating another phone on your account (e.g., your old Sprint phone, whatever it may be), waiting 15-20 minutes, then re-activating your Hero.
Been there, done that. My PRL updates work now.
Click to expand...
Click to collapse
I appreciate the tip but I would rather just ##775# and manually update if someone can upload the 60667.prl file.
I got the 60667.prl file from here: @ppcgeeks.
worked on my hero
xzjn9p said:
I got the 60667.prl file from here: @ppcgeeks.
worked on my hero
Click to expand...
Click to collapse
Blah, I grabbed the 60667.zip file and did the manual install, and I was roaming. So, I did a search for 60665.prl (which I had before), when I came on this thread.http://forum.xda-developers.com/showthread.php?t=691234&highlight=60665+prl&page=4 So, I noticed the 40060.prl that works with verizon, but does not cause roaming. I figured I'd try it out, and sure enough, no roaming. I have an Airave unit set up in my house, and now part of me wants to kick myself in the teeth because I could have used this all a long. Oh well. I'll see how it works when I go out West in a few weeks
Mod. edit: not dev related, moved to q&a
EVDO on 60667 prl?
I updated my phone to the 60667 PRL via the 'Update PRL' function in Settings->About Phone->System Updates last night.
I use an Airave at home (my house is in a ridiculous dead spot smack in the middle of a 5-bar coverage area), so I couldn't tell if it made any difference there.
My drive to work I streamed Pandora for about 20 minutes without a problem on EVDO
Now that I'm here, however, I can't seem to get a stable EVDO signal - my phone is stuck in 1x mode for the first time since I've owned it.. I usually have great signal here.
Anyone else experiencing EVDO signal issues on this PRL?
I've been root for years now running cyanogen mod. I am currently running cyanogenmod 7, but I found out the problem I am having isn't rom specific. The problem is my data doesn't work at all. The only way I can connect to the internet is via Wifi. It just started happening early Sunday morning. I restored back to a stock rom (still root) and tried to do updates but all updates failed. The system update and PRL update failed and the htc software update failed.
I tried restoring by running an RUU but I get bootloader verification failed. I have no idea what to do and I can't access the internet on my phone. Calls and texts still work though. It says i'm connect to Sprint 1xRTT but that data is "turning on" and never gets past that.
try restoring a sense rom that allows manual prl updates and see if that helps
rynet91 said:
I've been root for years now running cyanogen mod. I am currently running cyanogenmod 7, but I found out the problem I am having isn't rom specific. The problem is my data doesn't work at all. The only way I can connect to the internet is via Wifi. It just started happening early Sunday morning. I restored back to a stock rom (still root) and tried to do updates but all updates failed. The system update and PRL update failed and the htc software update failed.
I tried restoring by running an RUU but I get bootloader verification failed. I have no idea what to do and I can't access the internet on my phone. Calls and texts still work though. It says i'm connect to Sprint 1xRTT but that data is "turning on" and never gets past that.
Click to expand...
Click to collapse
I'm Not Sure if you have Sprint? But I've been Experiencing really Terrible Service lately Also...
I actually called Sprint and was Reimbursed Money do to the fact that they have Many Towers Down!
Look into that... its worth a Try!
Bierce22 said:
try restoring a sense rom that allows manual prl updates and see if that helps
Click to expand...
Click to collapse
I did restore to my stock rom which is original sense 2.1 and the PRL update fails even using wifi. Unfortunate...
i mean an older sense rom like zen or fresh hero and do a manual prl update if u dont know what that is read through the threads in my sig.
i mean an older sense rom like zen or fresh hero and do a manual prl update if u dont know what that is read through the threads in my sig.
Click to expand...
Click to collapse
I actually did the Prl Update last night through the Fresh Rom and my service is basically the same as before... Sprint keeps telling me its a Tower issue that'll be Resolved Soon. But I've been hearing that now for about 2-3 Weeks!
PMGRANDS said:
I actually did the Prl Update last night through the Fresh Rom and my service is basically the same as before... Sprint keeps telling me its a Tower issue that'll be Resolved Soon. But I've been hearing that now for about 2-3 Weeks!
Click to expand...
Click to collapse
Haha...if you're still in CT, I can confirm that the signal has been wacked out lately. It's driving me nuts.
hockeyfamily737 said:
Haha...if you're still in CT, I can confirm that the signal has been wacked out lately. It's driving me nuts.
Click to expand...
Click to collapse
Yeah Unfortunately... Still in ****ty Connecticut, and I feel your Pain! It's Driving me Absolutely Crazy too!
I Can't even do Anything Internet related Without WiFi, **** Sucks!
Hey guys, since switching to the 4.3 roms my voicemail has not been working. If I leave a vm from my work phone it never reaches my actual phone or shows up in VVM. Even when I try to dial 1 and connect to my vm normally, it says that is an incorrect number.
Is there something I need to do to re-associate my vm number to my phone?
indiscriminant said:
Hey guys, since switching to the 4.3 roms my voicemail has not been working. If I leave a vm from my work phone it never reaches my actual phone or shows up in VVM. Even when I try to dial 1 and connect to my vm normally, it says that is an incorrect number.
Is there something I need to do to re-associate my vm number to my phone?
Click to expand...
Click to collapse
If for some reason even dialing your voicemail manually doesn't work, it sounds like there is a provisioning issue on your device, so you could try something. First try updating you profile: go to settings, system updates -all the way at the bottom-, and tap on update profile. If that doesn't work, I assume the option activate device doesn't work either since its a custom rom. So if that doesnt work, then try flashing the stock RUU, and run activate device, this will force your device to re download all the provisioning data for your account. Let me know if either of those methods works.
matinm90 said:
If for some reason even dialing your voicemail manually doesn't work, it sounds like there is a provisioning issue on your device, so you could try something. First try updating you profile: go to settings, system updates -all the way at the bottom-, and tap on update profile. If that doesn't work, I assume the option activate device doesn't work either since its a custom rom. So if that doesnt work, then try flashing the stock RUU, and run activate device, this will force your device to re download all the provisioning data for your account. Let me know if either of those methods works.
Click to expand...
Click to collapse
When I try to update my prl it says "Unfortunately vDM Client has stopped." and the Activate is there but when doing it the message says "Sorry we experience a system problem during your task. Please dial *2 for psrint customer care."
The phone works in every other capacity fine.
indiscriminant said:
When I try to update my prl it says "Unfortunately vDM Client has stopped." and the Activate is there but when doing it the message says "Sorry we experience a system problem during your task. Please dial *2 for psrint customer care."
The phone works in every other capacity fine.
Click to expand...
Click to collapse
What rom are you using? you could try flashing the stock rooted rom and then try doing that:
http://forum.xda-developers.com/showthread.php?t=2467607
Look at the second post for the stock rooted deodexed rom. Flash that, it has no modifications other than being rooted and deodexed. When you flash it then try running activate device. Let me know what happens
matinm90 said:
What rom are you using? you could try flashing the stock rooted rom and then try doing that:
http://forum.xda-developers.com/showthread.php?t=2467607
Look at the second post for the stock rooted deodexed rom. Flash that, it has no modifications other than being rooted and deodexed. When you flash it then try running activate device. Let me know what happens
Click to expand...
Click to collapse
The first one I flashed was Venom, but it had some stability issues so I have swapped to Stock w/ Goodies earlier today. I will try to flash the complete stock later today. Is this like the old issues on the LTE Evo with provisioning where we had to occasionally call Sprint to do it?
Honestly i have no idea. And i doubt it. I cant see why you would need to call sprint. See when you activste your device it downloads everything necessary for provisioning so unless your phone is doing something wacky i doubt activating the device will fail. So yeah just flash the full stock rom and reactivate. It should work.
Sent from my HTCONE using Tapatalk
matinm90 said:
Honestly i have no idea. And i doubt it. I cant see why you would need to call sprint. See when you activste your device it downloads everything necessary for provisioning so unless your phone is doing something wacky i doubt activating the device will fail. So yeah just flash the full stock rom and reactivate. It should work.
Sent from my HTCONE using Tapatalk
Click to expand...
Click to collapse
This did end up having to be resolved by Sprint, called into their support and they had to remove, refresh, and reapply my voicemail. Took about 5 minutes and everything worked again and all of my voicemailes I had missed showed up as well.
indiscriminant said:
This did end up having to be resolved by Sprint, called into their support and they had to remove, refresh, and reapply my voicemail. Took about 5 minutes and everything worked again and all of my voicemailes I had missed showed up as well.
Click to expand...
Click to collapse
For future reference you can also try this. If you send a blank voice mail to [email protected] through the VVM app it will usually fix the problem. Had to do this on a friends phone the other day.
Anyone now getting the following error:
Unable to establish a wireless data connection.
LTE: ESM-65535
If so how to correct? Got it a few times since taking the OTA. Never got it since owning the phone prior to the OTA.
Any suggestions are greatly appreciated.
It's a fancy way of saying you had a data drop. I've noticed it a few times.
Sent from my HTC Butterfly s using Tapatalk
flomexico said:
It's a fancy way of saying you had a data drop. I've noticed it a few times.
Sent from my HTC Butterfly s using Tapatalk
Click to expand...
Click to collapse
Figured that part out, but never got that error message before. Before it would just drop the connection and no error message (before the OTA update).
weidnerj said:
Figured that part out, but never got that error message before. Before it would just drop the connection and no error message (before the OTA update).
Click to expand...
Click to collapse
Can you update the profile and PRL under settings >system updates? If so try this. If you can not do this you are having the same error many of us had after the update. The only "fix" was to run the RUU which sets to phone back to STOCK (it wipes ALL DATA). Since doing that I have had data drop once and this was while on CDMA after taking a phone call.
Ran the RUU to get the OTA (had rooted previously), then rerooted after the OTA. Going to go back to completely stock in preparation for KitKat next month. Will let you know if I still get that error. Appreciate the advice!
I RUUd and ran the OTA and stayed unrooted - still have the problem. It's minor, but it's there.
After flashing a rom, I can't connect to the mobile network. I can only access Internet through WiFi. I am also getting a message that says "the sim card is locked please reboot." Should I contact sprint? Has anybody else had this problem?
09eric09 said:
After flashing a rom, I can't connect to the mobile network. I can only access Internet through WiFi. I am also getting a message that says "the sim card is locked please reboot." Should I contact sprint? Has anybody else had this problem?
Click to expand...
Click to collapse
Yes, I have a similar problem. I have a thread here:
http://forum.xda-developers.com/showthread.php?t=2792317
Basically, if I run a sense rom (I have only tested Viper) or a CM11 rom (I tested the 6/25 nightly, Gummy Rom works too) then my network seems to work fine and I don't get the SIM locked error. If I run a more AOSP based ROM then I get this issue.
Test a sense ROM to see if you still have this issue, if so, you could need to get a new phone.
feizy said:
Yes, I have a similar problem. I have a thread here:
http://forum.xda-developers.com/showthread.php?t=2792317
Basically, if I run a sense rom (I have only tested Viper) or a CM11 rom (I tested the 6/25 nightly, Gummy Rom works too) then my network seems to work fine and I don't get the SIM locked error. If I run a more AOSP based ROM then I get this issue.
Test a sense ROM to see if you still have this issue, if so, you could need to get a new phone.
Click to expand...
Click to collapse
Thanks I'll test a sense rom out. Shame, I really enjoy using liquidsmooth.
Alright so I flashed back to sense, and I still get no 3g/lte connection. If I tick on/airplane mode, I can maybe get it for a couple of minutes. Anybody else have this problem? Looks like I might have to send this phone back.
EDIT: Ok, so after flashing back to stock rom, I updated the prl/profile, and everything was fine. I was able to connect to 3g/lte with no problems. Does this mean I will have to stay on a sense based rom? Is there a way I can update prl/profile on custom rom?
Flashing a Rom doesn't change your PRL.
Konfuzion said:
Flashing a Rom doesn't change your PRL.
Click to expand...
Click to collapse
Yes I figured that out. Thanks.
You can update your PRL on a sense ROM, you probably already tried that though. You could have a bad phone.....
feizy said:
You can update your PRL on a sense ROM, you probably already tried that though. You could have a bad phone.....
Click to expand...
Click to collapse
I did that, it worked.
PRL
Where would I find the PRL? Im having the same problem except im on tmobile
evily2k said:
Where would I find the PRL? Im having the same problem except im on tmobile
Click to expand...
Click to collapse
Settings/system update/update prl.