Greetings,
I have I9000 and i was on frameware 2.2.1 foryo then i updated it to 2.3.4( Maroc ) it was one file with tar extension by Odin but its now Cause some problems and make my phone slow so now i want change the frameware for something better and faster like Gingerbread 2.3.6 or any version of IceCream sandwich or Jellybean but all i need rom or frameware Aligned with the telephone and can run all the characteristics of the phone properly and there is no defects and the most important thing be supporting the Arabic language as well as I attach way to setup it .
PS.i made root to my phone by busybox and also i'm using tatainum backup so did i can restore all my program after flashing my phone with the new frameware?
DevastatedSoul said:
Greetings,
I have I9000 and i was on frameware 2.2.1 foryo then i updated it to 2.3.4( Maroc ) it was one file with tar extension by Odin but its now Cause some problems and make my phone slow so now i want change the frameware for something better and faster like Gingerbread 2.3.6 or any version of IceCream sandwich or Jellybean but all i need rom or frameware Aligned with the telephone and can run all the characteristics of the phone properly and there is no defects and the most important thing be supporting the Arabic language as well as I attach way to setup it .
PS.i made root to my phone by busybox and also i'm using tatainum backup so did i can restore all my program after flashing my phone with the new frameware?
Click to expand...
Click to collapse
download 2.3.6 Firmware from this thread
http://forum.xda-developers.com/showthread.php?t=1102881
i suggest JVU
then download CM 9 from http://get.cm/?device=galaxysmtd and flash
if you want JB , install any costum rom from development section
if you are moroccan gouulha
DevastatedSoul said:
Greetings,
I have I9000 and i was on frameware 2.2.1 foryo then i updated it to 2.3.4( Maroc ) it was one file with tar extension by Odin but its now Cause some problems and make my phone slow so now i want change the frameware for something better and faster like Gingerbread 2.3.6 or any version of IceCream sandwich or Jellybean but all i need rom or frameware Aligned with the telephone and can run all the characteristics of the phone properly and there is no defects and the most important thing be supporting the Arabic language as well as I attach way to setup it .
PS.i made root to my phone by busybox and also i'm using tatainum backup so did i can restore all my program after flashing my phone with the new frameware?
Click to expand...
Click to collapse
Yes, you can restore you'r apps with titanium backup, but only user apps, don't restore system apps, because you can get bootlop
Cheers,
The Tox said:
download 2.3.6 Firmware from this thread
http://forum.xda-developers.com/showthread.php?t=1102881
i suggest JVU
then download CM 9 from http://get.cm/?device=galaxysmtd and flash
if you want JB , install any costum rom from development section
if you are moroccan gouulha
Click to expand...
Click to collapse
thnx for ur responde but the link for 2.3.6 i think not include Arabic support only the 2.3.4 include Middle East area then what do u mean with (JUV) and what is the CM 9 and what the importance from install after 2.3.6 .
and what JB custom rom u reccmonde for me to be stable and work good and also include Arabic support.
sorry for too much question coz i'm normal user and btw I'm From Egypt.
DevastatedSoul said:
thnx for ur responde but the link for 2.3.6 i think not include Arabic support only the 2.3.4 include Middle East area then what do u mean with (JUV) and what is the CM 9 and what the importance from install after 2.3.6 .
and what JB custom rom u reccmonde for me to be stable and work good and also include Arabic support.
sorry for too much question coz i'm normal user and btw I'm From Egypt.
Click to expand...
Click to collapse
don't worry about arabic support , JB and ICS support arabic , and the font is amazing
CM9 is ICS
CM 10.x is JB
flash a 2.3.6 firmware then flash CM9 to avoid loosing IMEI , then install any costum rom you want , try SLIMBEAN or GamerzRom
The Tox said:
don't worry about arabic support , JB and ICS support arabic , and the font is amazing
CM9 is ICS
CM 10.x is JB
flash a 2.3.6 firmware then flash CM9 to avoid loosing IMEI , then install any costum rom you want , try SLIMBEAN or GamerzRom
Click to expand...
Click to collapse
what about (JUV) what dose it mean? and the link that u sent b4 include stock Kernel with every frameware and what the best frameware from 2.3.6
SlimBean or Gameezrom is ICS or JB?
and if i like to install CM 10.x did i will lose the IMEI?
DevastatedSoul said:
what about (JUV) what dose it mean? and the link that u sent b4 include stock Kernel with every frameware and what the best frameware from 2.3.6
SlimBean or Gameezrom is ICS or JB?
and if i like to install CM 10.x did i will lose the IMEI?
Click to expand...
Click to collapse
JUV is a 2.3.6 firmware , don't worry , install any 2.3.6 firmware from the thread that i posted
the kernel for 2.3.6 is stock ( from samsung )
slim bean and gamerzrom are JB roms
you have to install CM 9 ( ics ) first then install JB rom , to avoid loosing IMEI
The Tox said:
JUV is a 2.3.6 firmware , don't worry , install any 2.3.6 firmware from the thread that i posted
the kernel for 2.3.6 is stock ( from samsung )
slim bean and gamerzrom are JB roms
you have to install CM 9 ( ics ) first then install JB rom , to avoid loosing IMEI
Click to expand...
Click to collapse
Greetings,
sorry for prolong i will install 2.3.6 by odin so could u plz tell me the right steps that i have to do after finishing it to istall CM9 and CM10 and after installing CM9 and CM10 did i have to install something alse after these?
DevastatedSoul said:
Greetings,
sorry for prolong i will install 2.3.6 by odin so could u plz tell me the right steps that i have to do after finishing it to istall CM9 and CM10 and after installing CM9 and CM10 did i have to install something alse after these?
Click to expand...
Click to collapse
PLEASE INSTALL THIS FIRMWARE VIA ODIN
http://www11.zippyshare.com/v/52135055/file.html
After that you have to root your phone :
follow this
1.Download CF-Root
2. Unzip the file and you get a tar file. It may look like a zip file but it is not. So do not extract the tar file.
3. Open Odin
4. Switch off the phone and wait for vibration. When it vibrates it is completely off
5. Make sure you have drivers (JW4 installing section 1)
6. Put your phone to download download mode. To do that press vol down + home + power.
7. Now your phone should be in download mode. Plug it to computer (make sure odin is still open)
8. Click PDA tab and choose CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.tar.
9. Click start
10. Wait
11. Wait more and then there should read Success! in odin
12. Now you can disconnect the phone.
13. Finish!
Now we are ready to install a custom ROM!
Download the ROM. from here http://get.cm/get/3qH
Put it to your phone's internal sd-card
Reboot to recovery (vol up + home + power)
Wipe data/factory reset
Wipe cache
Advanced > wipe dalvik cache
Install zip from sd-card
Choose zip from sd-card
Select cm-9.0.0-galaxysmtd.zip
Confirm
Wait
Go back
Reboot
Know you have ICS on your phone , if you want to stay to ICS install Gapps if you want to upgrade to JB
download any custom rom from devlopoment section and install it as the same way you did with ICS ans install Gapps
موفق بإدن الله
اخوك من المغرب
The Tox said:
PLEASE INSTALL THIS FIRMWARE VIA ODIN
After that you have to root your phone :
follow this
1.Download
2. Unzip the file and you get a tar file. It may look like a zip file but it is not. So do not extract the tar file.
3. Open Odin
4. Switch off the phone and wait for vibration. When it vibrates it is completely off
5. Make sure you have drivers (JW4 installing section 1)
6. Put your phone to download download mode. To do that press vol down + home + power.
7. Now your phone should be in download mode. Plug it to computer (make sure odin is still open)
8. Click PDA tab and choose CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.tar.
9. Click start
10. Wait
11. Wait more and then there should read Success! in odin
12. Now you can disconnect the phone.
13. Finish!
Now we are ready to install a custom ROM!
Download the ROM. from here
Put it to your phone's internal sd-card
Reboot to recovery (vol up + home + power)
Wipe data/factory reset
Wipe cache
Advanced > wipe dalvik cache
Install zip from sd-card
Choose zip from sd-card
Select cm-9.0.0-galaxysmtd.zip
Confirm
Wait
Go back
Reboot
Know you have ICS on your phone , if you want to stay to ICS install Gapps if you want to upgrade to JB
download any custom rom from devlopoment section and install it as the same way you did with ICS ans install Gapps
موفق بإدن الله
اخوك من المغرب
Click to expand...
Click to collapse
Greeting,
which cell on Odin i have to put the Kernel on ?
What do you recommend ? ICS or JB and plz if u have the link of Gapps for both rom plz send it.
and plz if u have any idea how to backup my SMS to restore it after flashing tell me.
ومتشكر جدا أخى الكريم الفاضل لتعاونك معى أخ كريم من بلد عزيز وشقيق.
أخوك أحمد من القاهرة -مصر
DevastatedSoul said:
Greeting,
which cell on Odin i have to put the Kernel on ?
What do you recommend ? ICS or JB and plz if u have the link of Gapps for both rom plz send it.
and plz if u have any idea how to backup my SMS to restore it after flashing tell me.
ومتشكر جدا أخى الكريم الفاضل لتعاونك معى أخ كريم من بلد عزيز وشقيق.
أخوك أحمد من القاهرة -مصر
Click to expand...
Click to collapse
- PDA
- try them both and you'll find the difference
- i don't know if that will work with you , any way , use any sms Backup ( G backup cloud )
متشرفين
The Tox said:
- PDA
- try them both and you'll find the difference
- i don't know if that will work with you , any way , use any sms Backup ( G backup cloud )
متشرفين
Click to expand...
Click to collapse
Greetings,
You have sent to me the link to CM9 would you plz send the Gapps link for it and the link to CM10 Slim bean rom with Gapps for it coz i didn't want to miss coz the Forum here is very huge and i'm feelling getting lost on it thank u bro.
DevastatedSoul said:
Greetings,
You have sent to me the link to CM9 would you plz send the Gapps link for it and the link to CM10 Slim bean rom with Gapps for it coz i didn't want to miss coz the Forum here is very huge and i'm feelling getting lost on it thank u bro.
Click to expand...
Click to collapse
if you want to install JB after iCs you don't have to install Gapps for cm9
just let it boot , after that , turn off your phone and go to recovery and flash any JB rom
here is the link for slim bean thread
http://forum.xda-developers.com/showthread.php?t=2060374
you'll find download link
Slim-galaxysmtd-4.2.2.build.7-OFFICIAL
Slim_Gapps.4.2.2.build.7.x
PS : i've just suggested slimbean , i don't say it's the best , you should give a try for each rom to choose the best for you
The Tox said:
if you want to install JB after iCs you don't have to install Gapps for cm9
just let it boot , after that , turn off your phone and go to recovery and flash any JB rom
here is the link for slim bean thread
you'll find download link
PS : i've just suggested slimbean , i don't say it's the best , you should give a try for each rom to choose the best for you
Click to expand...
Click to collapse
for that reason i asked you about Gapps for both roms to give a try for each ty man for every thing u did for me just send the link for CM9 Gapps after that i will be got every thing i will need for flashing my phone i will do it tonight god willing.
PS: something more how can i install Gapps did i sould put it on SD card and install it after my phone boot like any program or i have to do from recovery?
Gapps come in a .zip file so just boot into recovery after you flash custom rom then flash Gapps
EDIT: Gapps may be included in custom rom so flash custom rom first and check if you have Gapps, if no Gapps then flash Gapps.
pryerlee said:
Gapps come in a .zip file so just boot into recovery after you flash custom rom then flash Gapps
EDIT: Gapps may be included in custom rom so flash custom rom first and check if you have Gapps, if no Gapps then flash Gapps.
Click to expand...
Click to collapse
Hi,
How can I know if the rom include Gapps or not and plz i need link for CM9 Gapps .thank you for your concern
just flash custom rom, and then look in app drawer, if you have google market, google talk, gmail or any other app from google then you have Gapps, if not download from here http://goo.im/gapps boot into recovery and flash Gapps.
ICS GAPPS [49MB] http://d-h.st/MFz
ICS GAPPS LITE [16MB] http://bit.ly/16N3bwq
Greatings,
I'm now on CM9 ICS but there something where the Icon of my Folders and music player i can't find them did i make something wrong?
i'm triing it now and i when i need to know something i will ask about it.
if i want to go back to GB what i have to do? coz i a want to do everything From the beginning to make sure that is no mistake i did
pryerlee said:
just flash custom rom, and then look in app drawer, if you have google market, google talk, gmail or any other app from google then you have Gapps, if not download from here boot into recovery and flash Gapps.
ICS GAPPS [49MB]
ICS GAPPS LITE [16MB]
if i want to go back to GB what i have to do? coz i a want to do everything From the beginning to make sure that is no mistake i did
Click to expand...
Click to collapse
Related
I m running on stock 2.3.4 rom.. m rooted now.. m facing certain problems :
1. Dialer lags 2 to 3 seconds when i hit call button.
2. Ringtone sounds as if its a scratched disk.
3. When i slide for accepting a call the timer takes 2-3 secs to start.
4. Sometimes the phone goes dumb.. gives no sounds at all ; neither during call, music player ( stock, 3rd party ) , touch sounds, unlock sound. Nothing works.
5. Camera goes black n asks 2 " Turn on Hardware Mode ".
Only restarting the phone seems to help for a short span of time.
Now dt i m rooted, i want to upgrade to ICS Spice 2.3.4
i hv downloaded this n the base rom AndroIDv3.3 RC2. Somebody please guide me step by step ( i don't wanna end up owning a 4 inch brick )... ur help wud b greatly appreciated.
please help me out pals....
New?
Hey Buddy...
I am assuming you are new to this device...Well read the XDA section for this device. There's lots of grt information and ROMS to try..
I am assuming you are on Spice Stock Gingerbread. First things first theres in no stable ICS Rom for this device. edowar has done a amazing job of porting the first Pre Alpha Cm9 build...but that's not completely functional...
details: http://forum.xda-developers.com/showthread.php?t=1434219
As for what ROM you should try....Try Edowar CM7, TJ's MIUI, or MMACCs Maclite..
Or if you want to stick with Stock Wellcom A99 stock is the most stable...the New Stocl from Sharp has also got grt reviews...maybe you can try that...
You will find all threads and info in the device dev section.
Though be careful, as u rightly said you dont want a 4 inch brick....read carefully, ask questions....
More valuable info on Tj's Forum
http://forum.andro-id.net/fb0_system_modification/
Happy Flashing....
how to flash Andro-ID v3.3 RC1 using SUT LR 1.8.2 ???? n yes m on Stock Gingerbread...
ezio2 said:
how to flash Andro-ID v3.3 RC1 using SUT LR 1.8.2 ???? n yes m on Stock Gingerbread...
Click to expand...
Click to collapse
1. install. SUT LR 1.8.2 in your PC
2. rc1 ( .nb0) should be somewhere in your PC
3. put the phone on download mode ( volume up + power on) and connect it to PC via usb
4. run sut LR, see the notification ' a phone is connected, browse and select the rom (.nb0) file and click next and wait until flashing is completed. once completed click finish.
5. disconnect the phone and remove battery and then replace it back and switch on the phone.
6. for cwm recovery again go to download mode and replace the stock recovery with cwm recovery.
7. put rc2 in your SD card, go to recovery mode and flash rc2 (.zip)
read 'roll -up ' thread in the development section by Haree.
or read the first page of this
forum.lowyat.net/topic/1985476
i downloaded andro-ID v3.3 rc1 in .zip format . when i extracted it i got 6 files namely
.android_secure, boot, cache, data nd system ( all image files )
also i hv nandroid.md5 file...
i completed upto step 3 but further i could not select any .nbo file... i could not find it anywhere....
what do i do now ???? i already hv cwm installed implyiny m rooted... help !!!
ezio2 said:
i downloaded andro-ID v3.3 rc1 in .zip format . when i extracted it i got 6 files namely
.android_secure, boot, cache, data nd system ( all image files )
also i hv nandroid.md5 file...
i completed upto step 3 but further i could not select any .nbo file... i could not find it anywhere....
what do i do now ???? i already hv cwm installed implyiny m rooted... help !!!
Click to expand...
Click to collapse
if it is in .zip format then dont unzip it... just put it in the sd card and flash it via cwm...........steps 1. install zip from sd card 2. select zip from sd card 3. install zip.... thats all .. then install rc2 (same procedure)
do i need to rename the .zip file to anything ???? wht if its in .7z format ??? ( i got it in .7z format on the forum u suggested )
did u flash rc1 using sut LR? if yes, you should have selected 'erase all user data ' which I forgot to mention.. (because of all the problems you have mentioned in your post) . if you have not selected the option, you should reflash the rom again selecting the 'erase all user data) ...
tellin me now... :-o kkkk ... :-| nevr mind... i ll do dt agn if dt won't cause any prblm.. on rc2 by Archanian nw by the way.... \m/
sorry i was away and was always late in replying.. if you dont face any problem then ok you need not to do that.... actually RC2 was by TJ Style( stable one)...
actually every time when you flash new rom it is always better to erase user data ... and if you flash via cwm wipe user data , cache and dalvik
i did flash rc1 again with SUT LR by erasing all user data, then i used CWM to flash rc2 but didn't wipe data, cache n dalvik.. will dt b a prblm in future ????
is there any specific order of wiping data, cache n dalvik while flashing another rom ?
it is OK because rc2 is the upgrade of rc1. .. I really don't know if there is any specific order to be followed while wiping data via cwm. I use to wipe user data first then cache and dalvik last.
rc2 is working gud 4 me.... i did hv problems transfering mp3 files with a Nokia Supernova ( the supper buggy phone ) though... else all is well...
olla guys i think a few new peoples are having issues on case how to use software update tool and other updates ...
wait guys video coming up next on how to update fih-fbo devices on all stages rc1 rc2 rc3 wait till midnight today
rc3
kshitij_bhatt said:
olla guys i think a few new peoples are having issues on case how to use software update tool and other updates ...
wait guys video coming up next on how to update fih-fbo devices on all stages rc1 rc2 rc3 wait till midnight today
Click to expand...
Click to collapse
rc3 coming as well.. dt wud b gud... Kshitij is dere really an issue with bluetooth file transfer in rc2 ????
Im sure Spice will never ever release a ICS rom. That they had released a GB rom too was a surprise. The only way is if TJ or Edowar can make a stable rom.
Suppose m on rc3... can i get back 2 stock rom to avail my warranty... if yes then how ???
ezio2 said:
Suppose m on rc3... can i get back 2 stock rom to avail my warranty... if yes then how ???
Click to expand...
Click to collapse
Yes you can.
Just flash offical 2.2 rom for your device through SUT LR. And you are done you have your warranty
Sent from my CSL-MI410 using xda premium
You can go back to GB rom as well and Ur warranty will remain. Just ensure you have all the original files in the download mode.
all files in download mode !!!
mithil.thesailor said:
You can go back to GB rom as well and Ur warranty will remain. Just ensure you have all the original files in the download mode.
Click to expand...
Click to collapse
i put cell in download mode nd connect using usb cable . then i flash using SUT LR 1.8.2 on GB... is dt wht u meant
( m on rc3 now )
cud u plz guide me updating 2 MIUI frm my current rc3 ???
Whenever i install the Slim ics from Cwm recovery, it just keeps going in a bootloop
I have no idea what i must do to fix this?
I have factory reset, cleared cache n dalvik
Pls help urgent
I come from the Aosp rom by bhuvan goyal.
try to install it again,if it doesn't work make a clean install by
flashing xxjvu>flash kernel supported cwm>wipe all>install ics slim
if it still doesn't work after you stuck in bootlogo,install ics slim again
hope it works
trustsyzaa said:
try to install it again,if it doesn't work make a clean install by
flashing xxjvu>flash kernel supported cwm>wipe all>install ics slim
if it still doesn't work after you stuck in bootlogo,install ics slim again
hope it works
Click to expand...
Click to collapse
Same bloody problem,bootloops like hell
Can you give a link for XXJVU so that i can install Ics after that
Any other assistance? common guys
ramu
darkkid85 said:
Same bloody problem,bootloops like hell
Can you give a link for XXJVU so that i can install Ics after that
Any other assistance? common guys
ramu
Click to expand...
Click to collapse
common guys i need assistance here
what is this forum for?
calm down and sorry dude i just woke up about a minute ago
here is a download link for xxjvu> http://www.filefactory.com/file/c306c7d/n/I9000XXJVU_I9000OXAJVU_OXA.rar
and root kernel>http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip
Faryaab said:
Instructions For Flashing Firmware:
Extract the firmware
Put your device into Download MODE
Start Odin
Click PDA and select CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar.m d5
Click PHONE and select MODEM_I9000XXJVU_REV_00_CL1092175.tar.md5
Click CSC and select GT-I9000-CSC-MULTI-OXAJVU.tar.md5
Then finally click START!
Instructions For Rooting JVU :
Extract the Rooted Kernel
Open Odin
Put your device into Download MODE
Click PDA and select CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.tar
Then finally click START!
Click to expand...
Click to collapse
Credit the download link and installation guide to faryaab and chainfire
When you get into bootloops, flash the kernel from the rom using heimdall and reflash rom in cwm
darkkid85 said:
Whenever i install the Slim ics from Cwm recovery, it just keeps going in a bootloop
I have no idea what i must do to fix this?
I have factory reset, cleared cache n dalvik
Pls help urgent
I come from the Aosp rom by bhuvan goyal.
Click to expand...
Click to collapse
Try, in cwm factory reset/wipe cache/wipe delvik/format system/format cache/format data data and flash 2.8 Essentials i9000 first then Base 2.8 (if bootloops pullout battery, put it back, enter recovery, reset, wipe, flash base again) and then Essentials again.
beardedwonder said:
When you get into bootloops, flash the kernel from the rom using heimdall and reflash rom in cwm
Click to expand...
Click to collapse
how do you do that? the rom is 1 zip file. do i extract it?
xSamuraix said:
how do you do that? the rom is 1 zip file. do i extract it?
Click to expand...
Click to collapse
Unzip it and then push the file zImage to your phone with Heimdall while in download mode.
On command line, it's:
heimdall flash --kernel zImage
There's probably a way to do it in the GUI, too.
hey guys i just want some help because am planin to flash ics roms so i need a stock gb rooted + cwm ? download link ?
my quss
1- can i flash that rooted gb with cwm on odin pc without gettin the yallow triangle if there's not rooted gb with cwm then please provide me a link of gb rooted so i can use mobile odin to flash Abyss kernel 4.2
2- when i decide to go back from ics rom i should flash Abyss kernel in recover then reboot recovery then how can i flash the stock gb rooted in recovery or should i have a custom gb rom for it to be zip so i can flash it in recovery or should i just flash rooted stock gb with odin pc directly from ics rom ?
i know that i can do wiping things and factory data on ics and pleaes correct me if i said anything that would brick my phone thaank you so much you all for any help
am just worried i don't wanna brick my lovely Note
dannycanrock said:
hey guys i just want some help because am planin to flash ics roms so i need a stock gb rooted + cwm ? download link ?
my quss
1- can i flash that rooted gb with cwm on odin pc without gettin the yallow triangle if there's not rooted gb with cwm then please provide me a link of gb rooted so i can use mobile odin to flash Abyss kernel 4.2
2- when i decide to go back from ics rom i should flash Abyss kernel in recover then reboot recovery then how can i flash the stock gb rooted in recovery or should i have a custom gb rom for it to be zip so i can flash it in recovery or should i just flash rooted stock gb with odin pc directly from ics rom ?
i know that i can do wiping things and factory data on ics and pleaes correct me if i said anything that would brick my phone thaank you so much you all for any help
am just worried i don't wanna brick my lovely Note
Click to expand...
Click to collapse
Wht i understand is you want to flash a custom ICS rom on your note.
First of all..
Get root.
http://forum.xda-developers.com/showthread.php?t=1329360
Stick with the instructions.
After doing this you will have root+cwm installed on your lovely note.
Now download Abyss 4.2 from here.
http://forum.xda-developers.com/showthread.php?t=1362424
Now download custom ics rom from android development section and put it in your phone sd card or external card.
Reboot into recovery.
Flash abyss 4.2
Go to advanced and reboot recovery.
Now you have abyss redpill recovery or touch cwm.
Do all 3 wipes. Cache, Dalvik and data.
Flash rom
Reboot system
Sent from my GT-N7000 using XDA Premium App
Criskelo ICS v9 trouble
Hi,
I installed criskelo v9 on my phone just now..and titanium backup doesnt work..it says i do not have root permissions
now all my apps are on it and the phone is pretty pointless without it..
I tried installing abyssnote and franco kernel just to see if it works but the update gets stuck at "installing packages" and then reboots to system to the earlier settings..
the cwm i have right now is also not the touch version and my kernel is cf-root so i do not know if i should be reflashing criskelo directly on this to check for any difference..
PLease tell me what i need to do..I am lost and could not find anything after an hour of googling
shubhm_22 said:
Hi,
I installed criskelo v9 on my phone just now..and titanium backup doesnt work..it says i do not have root permissions
now all my apps are on it and the phone is pretty pointless without it..
I tried installing abyssnote and franco kernel just to see if it works but the update gets stuck at "installing packages" and then reboots to system to the earlier settings..
the cwm i have right now is also not the touch version and my kernel is cf-root so i do not know if i should be reflashing criskelo directly on this to check for any difference..
PLease tell me what i need to do..I am lost and could not find anything after an hour of googling
Click to expand...
Click to collapse
You need to get root first.. Follow this.
http://forum.xda-developers.com/showthread.php?t=1329360
Then check root permissions with root explorer. Don't try to flash kernels and wipes without the instructions as this will brick your device. Just stay calm and post here. I ll try to help ya as i could.
Sent from my GT-N7000 using XDA Premium App
Still not working!!
sahilarora2003 said:
You need to get root first.. Follow this.
http://forum.xda-developers.com/showthread.php?t=1329360
Then check root permissions with root explorer. Don't try to flash kernels and wipes without the instructions as this will brick your device. Just stay calm and post here. I ll try to help ya as i could.
Sent from my GT-N7000 using XDA Premium App
Click to expand...
Click to collapse
I followed the instructions to the T.. Root permissions didnt happen..Here's what i did..
1. Downloaded CWM and busybox and placed them where he said
2. Booted into recovery and installed CWM
After this the UI didnt change to the touch UI as he indicated but was still the button UI
3. ANyway went ahead and installed busybox from the zip
Here the progress was stuck at "unmounting system" till the phone reboot itself to the system..And i still dont have root permissions as per titanium..
Where did i go wrong?
shubhm_22 said:
I followed the instructions to the T.. Root permissions didnt happen..Here's what i did..
1. Downloaded CWM and busybox and placed them where he said
2. Booted into recovery and installed CWM
After this the UI didnt change to the touch UI as he indicated but was still the button UI
3. ANyway went ahead and installed busybox from the zip
Here the progress was stuck at "unmounting system" till the phone reboot itself to the system..And i still dont have root permissions as per titanium..
Where did i go wrong?
Click to expand...
Click to collapse
if u want to use gb version just to flash roms u can go ahead and install this stock gb rooted + cwm from dr.ketan i tried workin very well
http://d-h.st/HJM
dannycanrock said:
if u want to use gb version just to flash roms u can go ahead and install this stock gb rooted + cwm from dr.ketan i tried workin very well
http://d-h.st/HJM
Click to expand...
Click to collapse
Hi, what i really want is root permission so i can use criskelo as my ROM..I was using gb (checkrom v6 with abyss) till now and thought of upgrading to ICS...if i get root permissions i can restore my apps using titanium and my problem wil be solved..titanium is currently saying i dont have root permissions and not restoring my apps...
Of course i will want to change kernels too to mix and match my requirements with battery life later on...
If your desire is to just get rooted, then download the Abysskernel touch zip file* : http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.zip
Saved it in your external SD card and install it using Recovery Mode
After that, your phone should restart and check after if you have SU(Superuser) and CWM installed. If you do have it.. Rest assured your phone is already rooted.
*courtesy of RootGalaxyNote website
letters_to_cleo said:
If your desire is to just get rooted, then download the Abysskernel touch zip file* : http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.zip
Saved it in your external SD card and install it using Recovery Mode
After that, your phone should restart and check after if you have SU(Superuser) and CWM installed. If you do have it.. Rest assured your phone is already rooted.
*courtesy of RootGalaxyNote website
Click to expand...
Click to collapse
Thats where the problem is..i have tried installing that file multiple times..it gets stuck at "installing update" and reboots into the system..
Within the phone i already have CWM (as the app) in my phone but it says it cannot work coz i need cf-root v5 or newer for it to work...can i use the LRG file as given in this forum to change the kernel?
http://forum.xda-developers.com/showthread.php?t=1329360
file name : CF-Root-SGN_XX_DBT_LRG-v5.6-CWM5 (i had chosen the LRG modem while installing criskelo v9)
Are there different kernels for ICS and GB and maybe im trying the wrong file?
Also right now all i want is the root..but i also wanna be able to rollback to gb later and try other roms as per my convenience if i dont like criskelo..so any guidance keeping that in mind for the future will b much appreciated
Thanks..
shubhm_22 said:
Thats where the problem is..i have tried installing that file multiple times..it gets stuck at "installing update" and reboots into the system..
Within the phone i already have CWM (as the app) in my phone but it says it cannot work coz i need cf-root v5 or newer for it to work...can i use the LRG file as given in this forum to change the kernel?
http://forum.xda-developers.com/showthread.php?t=1329360
file name : CF-Root-SGN_XX_DBT_LRG-v5.6-CWM5 (i had chosen the LRG modem while installing criskelo v9)
Are there different kernels for ICS and GB and maybe im trying the wrong file?
Also right now all i want is the root..but i also wanna be able to rollback to gb later and try other roms as per my convenience if i dont like criskelo..so any guidance keeping that in mind for the future will b much appreciated
Thanks..
Click to expand...
Click to collapse
What is your current ROM now? stock DXLRG? if it is, yes you can flash that kernel on your link (using mobile odin pro). Try to check back after thru CWM if it still gives you the same message or not.
Yes, there are different kernels solely for ICS only and also solely for GB alone. Don't make a mistake in mixing a GB kernel to your ICS Rom or else your phone gets fried.
letters_to_cleo said:
What is your current ROM now? stock DXLRG? if it is, yes you can flash that kernel on your link (using mobile odin pro). Try to check back after thru CWM if it still gives you the same message or not.
Yes, there are different kernels solely for ICS only and also solely for GB alone. Don't make a mistake in mixing a GB kernel to your ICS Rom or else your phone gets fried.
Click to expand...
Click to collapse
I am right now on Criskelo ICS v9..
The exact problem on my phone (id mentioned earlier too) is that its like its semi-rooted..things like cpuspy etc work..but titanium backup and moble odin dont..my main motive is to have titanium working so i can use the phone normally..
Now i see that criskelo has just launched v10.1 of the same ROM which has solved the semiroot+wifi issue..download is in progress and It wud be great to know how i can move on to that now..
Abyssnote kernel is not installing (stuck at "installing update" ) and as per my knowledge the phone isnt rooted (coz titanium backup and mobile odin dont work)..
Can i rollback to prerooted gb (i have this file: Rooted_Stock_Odex_N7000DDLB2 - nonwipe gb ROM) via PC odin to initiate the whole process again under present circumstances?
Whole process here meaning *prerooted gb+abyssnote kernel+criskelo v10.1 install*..
PS - i did all wipes while installing the present ROM (if it matters)..
Yes, you have what we call it here as a semi rooted phone. Not getting all the permissions to access system files inside. It's a good thing though that Criskelo has a new version to his ROM and that should be appropriate in installing it.
Can you rollback to pre rooted GB? Yes you can. Just pick the appropriate GB ROM. And oh by the way bud, stay clear on fully wiping your phone... Remember your walking in a thin line here when your flashing Custom ICS ROMs...
Just a heads up, that's all.
Cheers!
letters_to_cleo said:
Yes, you have what we call it here as a semi rooted phone. Not getting all the permissions to access system files inside. It's a good thing though that Criskelo has a new version to his ROM and that should be appropriate in installing it.
Can you rollback to pre rooted GB? Yes you can. Just pick the appropriate GB ROM. And oh by the way bud, stay clear on fully wiping your phone... Remember your walking in a thin line here when your flashing Custom ICS ROMs...
Just a heads up, that's all.
Cheers!
Click to expand...
Click to collapse
thanks a lot for the quick response
just a final query..i dont have abyssnote on my phone now..i have whatever criskelo v9 gave me by default (i chose cf-root during install) and im semi-rooted..
Under these conditions can i go ahead with installing the prerooted gb ROM that i mentioned?
and about the heads-up (sorry im still new to flashing ) do u mean i shudnt be wiping everything when i do the flash to the prerooted gb now? (the ROM i have is a no-wipe ROM as i said earlier)
Thanks again
shubhm_22 said:
thanks a lot for the quick response
just a final query..i dont have abyssnote on my phone now..i have whatever criskelo v9 gave me by default (i chose cf-root during install) and im semi-rooted..
Under these conditions can i go ahead with installing the prerooted gb ROM that i mentioned?
and about the heads-up (sorry im still new to flashing ) do u mean i shudnt be wiping everything when i do the flash to the prerooted gb now? (the ROM i have is a no-wipe ROM as i said earlier)
Thanks again
Click to expand...
Click to collapse
first, let's tackle your second question. If your on Criskelo ICS now, please under NO circumstances, YOU DO NOT FULLY WIPE your phone before going back to the pre rooted GB. There's a bug circulating around the forum and it's called the SUPER BRICK BUG. It'll fry your emMC chip (on your phone) thereby making it as a dead paper bag. There are countless of folks here already that have succumbed to the bug. Most have returned their dead phone back to Samsung Repair for an exchange on the motherboard. That is how deadly this bug can sting your phone.
So stay away from it. (It's better late than never, mind you)
on your first question,
Use PC Odin to downgrade to a pre rooted GB one. That's it.
Cheers!
letters_to_cleo said:
first, let's tackle your second question. If your on Criskelo ICS now, please under NO circumstances, YOU DO NOT FULLY WIPE your phone before going back to the pre rooted GB. There's a bug circulating around the forum and it's called the SUPER BRICK BUG. It'll fry your emMC chip (on your phone) thereby making it as a dead paper bag. There are countless of folks here already that have succumbed to the bug. Most have returned their dead phone back to Samsung Repair for an exchange on the motherboard. That is how deadly this bug can sting your phone.
So stay away from it. (It's better late than never, mind you)
on your first question,
Use PC Odin to downgrade to a pre rooted GB one. That's it.
Cheers!
Click to expand...
Click to collapse
whoaa!! thank god i didnt do that!!!
as a beginner, im gonna take it as a thumb rule then to use PC odin whenever i have to change ROM from any custom ICS to any other ROM and stay away from recovery mode..once im on prerooted gb thru PC odin i can do what i desire...that shud keep me safe i guess
Thanks for saving me a year of groceries
shubhm_22 said:
whoaa!! thank god i didnt do that!!!
as a beginner, im gonna take it as a thumb rule then to use PC odin whenever i have to change ROM from any custom ICS to any other ROM and stay away from recovery mode..once im on prerooted gb thru PC odin i can do what i desire...that shud keep me safe i guess
Thanks for saving me a year of groceries
Click to expand...
Click to collapse
hehehe no problemo bud.. that's should be your rule of thumb from now on.
P.S.
don't forget to hit my 'Thank' button if I've helped you in one way or the other. Cheers! :good:
Did you get rooted installing busybox su? I think you have partial root.
Install busybox from playstore and open it. Press install button. It should be fine.
Sent from my GT-N7000 using XDA Premium App
to check if you are fully rooted copy and paste in root / system...install busybox that helped me on ics roms then once your fully rooted flash a safe kernel ..dafuq , speedmod etc then flash new rom . dont do any wiping til on a safe kernel and read instructions fully
@All
Thanks for the your responses
This is what i did after getting some doubts cleared over here:
I rolled back to a prerooted ODEX gb ROM..and installed rocketrom for now..gonna use it for a while and check how people are finding criskelo v10.1..Once im satisfied with that gonna go ahead with flashing it..
Thanks again :good:
I have a probleme : i have gingerbread and i want to update to jelly bean but i can't : the message is (installation aborted). I downloaded rom manager i help with http://theunlockr.com/2012/08/29/how-to-load-a-custom-rom-on-an-android-device/ because i have a bleu recovery . I flash the cwm in rom manager and i have the recovery orange . I can't load all custom rom .What's solution ?
Try ICS first.. Then flash jb..
Sent from my GT-I9000 using xda premium
LohithN said:
Try ICS first.. Then flash jb..
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I try this http://forum.xda-developers.com/showthread.php?t=1852546 but it's don't working
My baseband version is XXJVU
I have flash cm9 it's work ( installation complete) but and in boot i see he enter into recovery i see installation aborted
Search for the newest cwm recovery and flash it, install the JB Rom with factory reset and the hole stuff and then have a look at the wiki maybe theres a zip to go back to stock recovery (Used this way myself but i' m using the s+ so i don't now if theres such a file for the normal s. sorry for that)
Or you can search for how to recover from bootloop to recovery
Anywhere was a thread for this but don't know at the moment, will post a link tomorrow
Twll me if it helped you
markey97 said:
Search for the newest cwm recovery and flash it, install the JB Rom with factory reset and the hole stuff and then have a look at the wiki maybe theres a zip to go back to stock recovery (Used this way myself but i' m using the s+ so i don't now if theres such a file for the normal s. sorry for that)
Or you can search for how to recover from bootloop to recovery
Anywhere was a thread for this but don't know at the moment, will post a link tomorrow
Twll me if it helped you
Click to expand...
Click to collapse
No i try this but it's don't working for me i can't reflash to ics and jb . What's the solution
Hi.
first check your file download is complete
then Install 3 files Stock ROM (GB) then Root it with Semaphore and install Your Rom from Recovery
I use with this site http://pinappu.hubpages.com/hub/Sam...e-update-to-Android-40-aka-Ice-Cream-Sandwich . Thx you all
Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
wingleaf said:
Hi Guys,
I want to re-format and fresh install the official fimrware from samsung, please teach me how. Thanks
btw, the reason i want to re-format or fresh install is because my wifi and mobile data is turning it on automatically, any ideas about this? Thanks
Regards,
Wingleaf
Click to expand...
Click to collapse
Hi!
Maybe this will help: How to use Odin for GT-I9070
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
DjDiabolik said:
Hi boys&girls
I have in my hand a "old" GT-I9070 very laggy and very slowly at this moment.
I have an idea and i want try to FULL FORMAT and reflash all and after that if it's present here a custom rom (not necessary lollipop.....) i'm opened to all suggestion.
I have looked on sammobile and i have downloaded this:
http://www.sammobile.com/firmwares/download/23434/I9070XXLQL_I9070ITVLQ5_ITV/
I have prepared Odin but i want to aspect some information about someone here contain what i need to do after this full flash for example......... thanks in advance.
Click to expand...
Click to collapse
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
kilroy69 said:
If you want fast and stable custom rom, then try this: New build of CM10.2 in [Team Canjica] CyanogenMod 10.2 thread.
Click to expand...
Click to collapse
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
DjDiabolik said:
Interesting also it's no more developed
I don't know the world of this smartphone.... how i can find for example the exact custom recovery i can install ? Twrp ? CWM ? Or what ?
Click to expand...
Click to collapse
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
kilroy69 said:
The phone is too old to stay many developers (not much left) :crying:
Here is CWM: update.zip
If you need kernel, then after flash this: [Kernel][3.0.101] MK kernel r6
I think these files are only going on I9070 phone. I'm not sure that will be fine on i9070p.
If I'm wrong, someone correct me.
Click to expand...
Click to collapse
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
DjDiabolik said:
Oh yeah great suggestion
Tomorrow i prepare ODIN and flash the latest official rom. After that from stock recovery i thinks i can flash the root.zip for root access....... using flashify for installing recovery and after that finally installed this 10.2 and after that install the kernel here.
I thinks it's not the best solution...... but it's but it's better than nothing I need only to use this i9070 only for emergency or backup smartphone
Click to expand...
Click to collapse
This is the right order for me after Odin;
in recovery: wipe, flash update.zip, flash mkkernel zip, flash root.zip and then custom rom + gapps.
I don't flash kernel on custom rom. You know that you need it or not. I think that's unnecessary. I would rather flashing kernel before flashing custom rom.