Database Develop

SGS sudden reboot then settings like have been reset...

Hi,
Does anyone i9000 facing sudden reboot then settings like reset and browser & home button can't use anymore problems here?
I have no idea what's happen to my sgs and got this problem since last September happened. I had flashed few cm10 build roms with full wipes, format system/cache/data and storage before but it still happen in cm10 nightly 20121010 just now. This problem keeps annoyed me... Please help

johnsin5393 said:
Hi,
Does anyone i9000 facing sudden reboot then settings like reset and browser & home button can't use anymore problems here?
I have no idea what's happen to my sgs and got this problem since last September happened. I had flashed few cm10 build roms with full wipes, format system/cache/data and storage before but it still happen in cm10 nightly 20121010 just now. This problem keeps annoyed me... Please help
Click to expand...
Click to collapse
Try using the fix permission or try another rom.

Yeah, the problem appeared since I used remix-jb rom last time. Then I flash to cm 10 roms, but it still appear again. Do I need to wipe cache&dalvik cache, then fix permission?
Sent from my GT-I9000 using xda premium

johnsin5393 said:
Yeah, the problem appeared since I used remix-jb rom last time. Then I flash to cm 10 roms, but it still appear again. Do I need to wipe cache&dalvik cache, then fix permission?
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
yes you can try that...

I am on Remics-JB v2.0, it was fine for one week. All of sudden reboots are happening almost 1-2 times in a day.
Any solution for this?

Hi, guys.
If I wish to use odin flash back to 2.3 gb rom then re-flash cm10 again, which 2.3 gb version do you recommend?
My sgs still have the randomly then get reset system & lost home button function, so I wish to try reflash to see whether can remove this problem...
And then, can I flash latest cm10 directly after I flash cm7 on 2.3 gingerbread?
Thank you.

[Q] Help !! My SGN wont Turn on !!!

Hello everyone
My phone isnt working turning on , its stuck on the samsung logo !
I was using Ultimate jb rom when suddenly my phone turned off and it was stuck on the samsung logo , i tired flashing the another rom Angry v3 4.1.2 at first it the phone turned on and then the same happened , after that i tired flashing to stock ICS and now its again stuck on the samsung logo , what should i do now ? Please help asap
Thanks in advance

Have you tried to flash back with Odin PC?

Kortxero said:
Have you tried to flash back with Odin PC?
Click to expand...
Click to collapse
Yeah i flashed stock ICS using pc odin !

xp3rto said:
Yeah i flashed stock ICS using pc odin !
Click to expand...
Click to collapse
You should use a wipe stock ROM when flashing through Odin.

Since struck at logo, battery may be ok, nevertheless as a blind shot, why don't you try with another battery.
Sent from my GT-N7000 using xda premium

after installing the ICS rom, install a safe kernel and do a factory reset, wipe cache and dalvik.
dont you have any nandroid backups?

i have this problem b4
try flash safe kernel (example hydracore), reboot
then go to download mode flash any type of ROM
and do a factory reset, wipe cache and dalvik

pods71 said:
i have this problem b4
try flash safe kernel (example hydracore), reboot
then go to download mode flash any type of ROM
and do a factory reset, wipe cache and dalvik
Click to expand...
Click to collapse
If you install ICS, the its not safe to do a wipe till you install a safe kernel...

Thanks for the help everyone The phone turned on finally after doing this
nokiamodeln91 said:
after installing the ICS rom, install a safe kernel and do a factory reset, wipe cache and dalvik.
Click to expand...
Click to collapse
Thanks everyone
Happy New Year !!

xp3rto said:
Thanks for the help everyone The phone turned on finally after doing this
Thanks everyone
Happy New Year !!
Click to expand...
Click to collapse
having the same issue right now.. i rooted my stock rom, and used speedmod 15 version. This morning the screen started flickering and occasional power offs. Then the battery reading was incorrect - first 60%, then it went to 65%. After a restart it went to 12% after which I just recharged the phone as usual. No problems until this evening again it went bad and couldn't restart. I can however restart in CWM recovery and luckily have a NAND backup and Titanium backup of everything that is important to me.
I also managed to recover the /sdcard partition with adb pull command. Right now the phone will not boot past the startup animation. I already tried CM 10.1 31.12 nightly and also 9.1 stable, and have the exact same issue.
Anyone know how to fix this except for wiping? Because I already wiped everything while trying the CM builds.

First check if the battery is good. Also try a different battery.
Also this time installing the rom, try in cwm, mounts & storage, format/system, format/data, format/cache and then flash the rom
Sent from my GT-N7000 using xda premium

just a quick update, I ran in recovery mode and did an fsck on the 9 and 10 partitions, i got a lot errors that got "fixed" by fsck. After that I just reflashed the CM10.1 nightly and it made it past the boot screen. Not for long though. After restarting it didn't get past the boot screen again.
I gave up yesterday night and just started downloading the latest official GB. This morning I flashed it with odin and it kind of worked, until i got force closes in the wifi settings step of the setup wizard.
Now it boots into android but doesn't get past the wizard screen. I will try flashing the GB rom once more through odin, maybe that fixes some things.
any other suggestions? If it is the battery, would it make any difference if it was plugged into the wall charger while starting the phone?
---------- Post added at 12:27 PM ---------- Previous post was at 12:03 PM ----------
another update: I did a factory reset on the GB rom and am using it while connected to the wall charger. It seems to be working OK like this. So I guess I need to find a battery and try to restore my apps and settings

Another update, I ordered a brand new genuine battery and now it seems to work stable again. I just used it as a mp3 player and to surf for a few hours and no instability issues anymore, boots up perfectly.
Original battery was dated november 2011. The new one (also genuine samsung) is from october 2012 I believe.

[Q] URGENT My Note doesn't boot after flashing HydraCore v7

Hello guys, i have a Note on stock ICS 4.0.4 and i was using SpeedMod kernel untill a few minutes ago, but now i tried to flash HydraCore v7 Standard(From here https://www.dropbox.com/sh/tgt862w7t0dbbwf/wtCeOLxSsU/HydraCore 7 ) and after that my phone refuses to boot, it only gets to "Samsung Galaxy Note GT-N7000" screen but after that the screen just turns black and i need to remove the battery to try again or to go into CMW.
I tried to reflash the SpeedMod .zip but it doesn't work(The CMW version changes, but i still can't boot).
I'm a noob, brought my Note two months ago and i am an Android noob(Came from iOS).
Could someone here PLEASE help me?

Quimerinha said:
Hello guys, i have a Note on stock ICS 4.0.4 and i was using SpeedMod kernel untill a few minutes ago, but now i tried to flash HydraCore v7 Standard(From here https://www.dropbox.com/sh/tgt862w7t0dbbwf/wtCeOLxSsU/HydraCore 7 ) and after that my phone refuses to boot, it only gets to "Samsung Galaxy Note GT-N7000" screen but after that the screen just turns black and i need to remove the battery to try again or to go into CMW.
I tried to reflash the SpeedMod .zip but it doesn't work(The CMW version changes, but i still can't boot).
I'm a noob, brought my Note two months ago and i am an Android noob(Came from iOS).
Could someone here PLEASE help me?
Click to expand...
Click to collapse
Did you wipe cache and dalvik cache?
Next time read the threads for a new kernel or a new Custom Rom here in XDA and follow the installation instructions carefully. This reduces the chances of error dramatically.
But first try to clean the caches and reboot again.

Just wiped Dalvik Cache and Partition Cache but i still can't boot.

Quimerinha said:
Just wiped Dalvik Cache and Partition Cache but i still can't boot.
Click to expand...
Click to collapse
Please try the factoy reset.

As the poster before said: factory reset is a possibility.
But: only if you really sure you're using a recovery in a safe kernel. This should be from what you told before.
Another option I would try first:
So I would search for the Philz kernel for your ICS and install this first in CWM. Maybe you can boot with this into Android. If not this gives you a safe environment for factory reset or installing a new Rom

When you want revert from HydraCore v7 kernel you need to flash this:
http://forum.xda-developers.com/showpost.php?p=32806581&postcount=10783
After flashing this .zip, see if it boots properly, then you can try flash any other kernel that you want (speedmod, philz, or other version of HydraCore/Notecore)
Edit: oh I see this file isnt avilable anymore, so try this link:
https://docs.google.com/file/d/0B_a9lzwtDaN5VnNzME1YUWRKNVk/edit?usp=sharing

djoni_gitara said:
When you want revert from HydraCore v7 kernel you need to flash this:
http://forum.xda-developers.com/showpost.php?p=32806581&postcount=10783
After flashing this .zip, see if it boots properly, then you can try flash any other kernel that you want (speedmod, philz, or other version of HydraCore/Notecore)
Edit: oh I see this file isnt avilable anymore, so try this link:
https://docs.google.com/file/d/0B_a9lzwtDaN5VnNzME1YUWRKNVk/edit?usp=sharing
Click to expand...
Click to collapse
Thanks dude, you saved me!
Didn't need to do the factory resets, used this .zip and now i can boot. Think i will stay with that kernel for a while now Maybe later i get back to SpeedMod. But, anyway, thank you all for helping me out with this guys, I really appreciate it.

Trouble flashing jfbs kitkat rom

I have tried multiple times to flash jfbs's Kitkat rom without sucess. I am using CWM 6.0.4.5 from his OP, have tried different downloads of the rom, have done multiple wipes and factory resets, all to no avail.
After the install I get the boot animation that runs for about five minutes then boots to a black screen with the status or navigation bar (the one on top of the screen with battery level and signal strength) but the bar is on the bottom and the rest of the screen is black. Any help would be appreciated.
I am able to flash other roms without a problem including Kitkang v1 by Awsome.
Any help would be appreciated.

I have seen the status bar problem, but it normally goes away after a couple of seconds, the longest I had it was about 3 mins when opening Facebook. Try wiping everything including internal SD. Not you external. See it that helps
Sent from my SGH-T679 using XDA Premium 4 mobile app

I have noticed the status bar on the bottom since the 12\25 build. Changed a few things with a test build last night and it is still present. Do you get a black screen with builds prior to 12\25?

tazmaniondvl said:
I have seen the status bar problem, but it normally goes away after a couple of seconds, the longest I had it was about 3 mins when opening Facebook. Try wiping everything including internal SD. Not you external. See it that helps
Sent from my SGH-T679 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
When I do a wipe data/factory reset isn't that wiping my internal SD?

No. It wipes data partition and cache.

jfbs said:
I have noticed the status bar on the bottom since the 12\25 build. Changed a few things with a test build last night and it is still present. Do you get a black screen with builds prior to 12\25?
Click to expand...
Click to collapse
I have not tried an earlier build recently, but tried the 12/08 build when it first came out and it worked ok. I'll try to install the 12/08 build again and maybe dirty flash to the most recent build.

jfbs said:
No. It wipes data partition and cache.
Click to expand...
Click to collapse
Sorry for the noob question, but how do I wipe the internal SD?

I would try that too. I really don't know why its giving you troubles, but you shouldn't have to wipe sdcard even though it's recommended. I have some newer builds, but I'm trying to get the stock camera working before I upload another.
---------- Post added at 07:02 PM ---------- Previous post was at 06:59 PM ----------
Go to wipe > advanced wipe and select sdcard, then swipe to confirm.
Edit: noticed you're using cwm, so hold on and I'll switch to that and get back in a few.

jfbs said:
I would try that too. I really don't know why its giving you troubles, but you shouldn't have to wipe sdcard even though it's recommended. I have some newer builds, but I'm trying to get the stock camera working before I upload another.
Click to expand...
Click to collapse
Thanks will give the wipe SD a try and if that does not work I'll try an older build.

mpces said:
Thanks will give the wipe SD a try and if that does not work I'll try an older build.
Click to expand...
Click to collapse
In cwm go to mounts and storage and select format /storage/sdcard0.

jfbs said:
I would try that too. I really don't know why its giving you troubles, but you shouldn't have to wipe sdcard even though it's recommended. I have some newer builds, but I'm trying to get the stock camera working before I upload another.
---------- Post added at 07:02 PM ---------- Previous post was at 06:59 PM ----------
Go to wipe > advanced wipe and select sdcard, then swipe to confirm.
Edit: noticed you're using cwm, so hold on and I'll switch to that and get back in a few.
Click to expand...
Click to collapse
Already started with the wipe and reinstall

mpces said:
Already started with the wipe and reinstall
Click to expand...
Click to collapse
Did the wipe of the internal SD and still have the same problem.
I have the battery stat and the signal strength on the bottom right corner and black screen. When it goes to sleep after 30 seconds or so I can press the power button and it brings up the unlock screen which when I unlock brings me back to the black screen.

mpces said:
Did the wipe of the internal SD and still have the same problem.
Click to expand...
Click to collapse
Did you wipe sdcard, install 12\08, reboot, boot back to recovery and installed 12\25, wiped cache and dalvik, rebooted and got black screen already? Did you have black screen with 12\08?

jfbs said:
Did you wipe sdcard, install 12\08, reboot, boot back to recovery and installed 12\25, wiped cache and dalvik, rebooted and got black screen already? Did you have black screen with 12\08?
Click to expand...
Click to collapse
Tried the 12/25...will try the 12/08 now

mpces said:
Tried the 12/25...will try the 12/08 now
Click to expand...
Click to collapse
Ok wiped the internal SD again, factory reset and data wipe, wiped cache, and wiped dalvick. Installed 12/08 rom and it has installed correctly. what would you advise next, flashing the 12/25 rom? And wiping what? Really appreciate the help, thanks!

mpces said:
Ok wiped the internal SD again, factory reset and data wipe, wiped cache, and wiped dalvick. Installed 12/08 rom and it has installed correctly. what would you advise next, flashing the 12/25 rom? And wiping what? Really appreciate the help, thanks!
Click to expand...
Click to collapse
Let's try something else. I'll upload a new build and see if changing the kernel made any difference. It'll take about 15 minutes, so keep an eye on the cm11 thread and avoid the 12/25 build for the time being.

jfbs said:
Let's try something else. I'll upload a new build and see if changing the kernel made any difference. It'll take about 15 minutes, so keep an eye on the cm11 thread and avoid the 12/25 build for the time being.
Click to expand...
Click to collapse
ok thanks

New build 12/29 did not work...same problem. Tried 12/08 rom and it installed ok then tried a dirty flash to 12/29 rom and had all kinds of problems. Went back to AOIP 4.2.2 for now.

I'm having the same problems. I've tried checking md5s and they match. 12/29 boots up from a clean install until I install banks standard and or core gapps. With standard gapps it locks up at the splash screen. With core gapps it locks up when it says android is upgrading.
Basically once I install gapps it's doomed. Same results with cwm and twrp. How are others able to install this ROM?

Are you wiping cache and dalvik-cache before installing gapps? If not before, after installing? Either way should work.

[Q] How to fix ''fixed'' camera?

Hey there,
I'm using this Mardon's ROM -> [ROM][CM10.2] - modded - [stable-20140126]
links's here: http://forum.xda-developers.com/showthread.php?t=2442024
I've got an issue with camera - I reboot to recovery, wipe data/factory reset, format/system, install ROM, install hotfix, reboot - just like in instruction. And when I try to record video with camera app (Gallery2.apk)- on high quality compression I see just grey colour screen and on lower qualities, there is a green colour,stripes, sound only.
I've seen that video recording should be working already couple of versions ago, so what am I doing wrong?
I'm using CWM 6.0.4.7, but before I was trying that on CWM 5 with the same result. Please help.

sexipsik said:
Hey there,
I'm using this Mardon's ROM -> [ROM][CM10.2] - modded - [stable-20140126]
links's here: http://forum.xda-developers.com/showthread.php?t=2442024
I've got an issue with camera - I reboot to recovery, wipe data/factory reset, format/system, install ROM, install hotfix, reboot - just like in instruction. And when I try to record video with camera app (Gallery2.apk)- on high quality compression I see just grey colour screen and on lower qualities, there is a green colour,stripes, sound only.
I've seen that video recording should be working already couple of versions ago, so what am I doing wrong?
I'm using CWM 6.0.4.7, but before I was trying that on CWM 5 with the same result. Please help.
Click to expand...
Click to collapse
replace the camera app with one from cm 11 by jenkins build and see if it is working or not

sexipsik said:
Hey there,
I'm using this Mardon's ROM -> [ROM][CM10.2] - modded - [stable-20140126]
links's here: http://forum.xda-developers.com/showthread.php?t=2442024
I've got an issue with camera - I reboot to recovery, wipe data/factory reset, format/system, install ROM, install hotfix, reboot - just like in instruction. And when I try to record video with camera app (Gallery2.apk)- on high quality compression I see just grey colour screen and on lower qualities, there is a green colour,stripes, sound only.
I've seen that video recording should be working already couple of versions ago, so what am I doing wrong?
I'm using CWM 6.0.4.7, but before I was trying that on CWM 5 with the same result. Please help.
Click to expand...
Click to collapse
I would suggest you to flash this rom and hotfix again from CWM 5. It could be CWM 6 causing the problem as CWM 6 is still not stable. I know you have already done this, but as I have gone through the Mardon's thread, no one else had such a problem when flashed through CWM 5. Also there is a new stable release. Before flashing, do Wipe Data/Factory reset, Wipe Cache partitions, Mount & Storage>Format system, Wipe Dalvik Cache and Wipe Battery Stats. Do post your result. Hope I Helped
aditya rathee said:
replace the camera app with one from cm 11 by jenkins build and see if it is working or not
Click to expand...
Click to collapse
Since there are changes in the API's from CM 10 to CM 11, I don't know if the Camera app from CM 11 will work on CM 10. But it's still worth a try

Will try out!
mahithm said:
I would suggest you to flash this rom and hotfix again from CWM 5. It could be CWM 6 causing the problem as CWM 6 is still not stable. I know you have already done this, but as I have gone through the Mardon's thread, no one else had such a problem when flashed through CWM 5. Also there is a new stable release. Before flashing, do Wipe Data/Factory reset, Wipe Cache partitions, Mount & Storage>Format system, Wipe Dalvik Cache and Wipe Battery Stats. Do post your result. Hope I Helped
Since there are changes in the API's from CM 10 to CM 11, I don't know if the Camera app from CM 11 will work on CM 10. But it's still worth a try
Click to expand...
Click to collapse
At first - thanks for reply. I'm going to try it out and post my experience here. The only problem for me is time.
What version of CWM 5 do you advice to me? It is necessary to flash stock rom via Odin, root again and then flash new CWM via Odin, is it?

mahithm said:
I would suggest you to flash this rom and hotfix again from CWM 5. It could be CWM 6 causing the problem as CWM 6 is still not stable. I know you have already done this, but as I have gone through the Mardon's thread, no one else had such a problem when flashed through CWM 5. Also there is a new stable release. Before flashing, do Wipe Data/Factory reset, Wipe Cache partitions, Mount & Storage>Format system, Wipe Dalvik Cache and Wipe Battery Stats. Do post your result. Hope I Helped
Since there are changes in the API's from CM 10 to CM 11, I don't know if the Camera app from CM 11 will work on CM 10. But it's still worth a try
Click to expand...
Click to collapse
still if this does not work bro try camera app of last stable build of cm 10 made by jenkins
also HAPPY HOLI { it is a festival of colors in india}

sexipsik said:
At first - thanks for reply. I'm going to try it out and post my experience here. The only problem for me is time.
What version of CWM 5 do you advice to me? It is necessary to flash stock rom via Odin, root again and then flash new CWM via Odin, is it?
Click to expand...
Click to collapse
Your only option is to flash the stock rom using odin. Here is the link on how to install stock rom using odin,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. As for rooting and installing CWM 5, goto stock recoveymod, choose "apply update from sdcard", then choose the root package first. Perform similar steps to install CWM 5 too and then choose "Reboot system now". Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I Helped
---------- Post added at 11:03 AM ---------- Previous post was at 10:51 AM ----------
aditya rathee said:
still if this does not work bro try camera app of last stable build of cm 10 made by jenkins
also HAPPY HOLI { it is a festival of colors in india}
Click to expand...
Click to collapse
Happy Holi to you and your family too, Bro

mahithm said:
Your only option is to flash the stock rom using odin. Here is the link on how to install stock rom using odin,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. As for rooting and installing CWM 5, goto stock recoveymod, choose "apply update from sdcard", then choose the root package first. Perform similar steps to install CWM 5 too and then choose "Reboot system now". Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I Helped
---------- Post added at 11:03 AM ---------- Previous post was at 10:51 AM ----------
Happy Holi to you and your family too, Bro
Click to expand...
Click to collapse
have fun and tell me after trying my method if it worked or not

Suprise, suprise...
aditya rathee said:
have fun and tell me after trying my method if it worked or not
Click to expand...
Click to collapse
Dear friends,
Mr. Mardon released new stable CM 10.2 with included hotfix! I tried that with CWM 6 and... still same ****.
Then I did it your way - flashed stock ROM, root, install CWM 5.0.2.6, installed new stable release (in Submit bug section there was my post marked as ''resolved'') and - NOTHING!
The only change is that on ''extreme'' quality compression, I get same green stripes as on other qualities instead of just grey screen. One guy there (at least one - one who posted that too) has the same problem. It's really frustrating for me...
At this moment I have CM 7.2 adrenalin ROM in device and... thinking about future :laugh:
What you mean, guys?

sexipsik said:
Dear friends,
Mr. Mardon released new stable CM 10.2 with included hotfix! I tried that with CWM 6 and... still same ****.
Then I did it your way - flashed stock ROM, root, install CWM 5.0.2.6, installed new stable release (in Submit bug section there was my post marked as ''resolved'') and - NOTHING!
The only change is that on ''extreme'' quality compression, I get same green stripes as on other qualities instead of just grey screen. One guy there (at least one - one who posted that too) has the same problem. It's really frustrating for me...
At this moment I have CM 7.2 adrenalin ROM in device and... thinking about future :laugh:
What you mean, guys?
Click to expand...
Click to collapse
I'm sorry to hear that it's not working. Since there is no change even after flashing through CWM 5.0.2.6, this must be a rom related problem. Since you already have 10 posts, now you can directly post this question in the corresponding rom thread so that the owner @Mardon can reply it. Please post the solution here nonetheless so that if anyone encounter the same problem, they will know what to do. Hope I Helped