Hey there,
I'm using this Mardon's ROM -> [ROM][CM10.2] - modded - [stable-20140126]
links's here: http://forum.xda-developers.com/showthread.php?t=2442024
I've got an issue with camera - I reboot to recovery, wipe data/factory reset, format/system, install ROM, install hotfix, reboot - just like in instruction. And when I try to record video with camera app (Gallery2.apk)- on high quality compression I see just grey colour screen and on lower qualities, there is a green colour,stripes, sound only.
I've seen that video recording should be working already couple of versions ago, so what am I doing wrong?
I'm using CWM 6.0.4.7, but before I was trying that on CWM 5 with the same result. Please help.
sexipsik said:
Hey there,
I'm using this Mardon's ROM -> [ROM][CM10.2] - modded - [stable-20140126]
links's here: http://forum.xda-developers.com/showthread.php?t=2442024
I've got an issue with camera - I reboot to recovery, wipe data/factory reset, format/system, install ROM, install hotfix, reboot - just like in instruction. And when I try to record video with camera app (Gallery2.apk)- on high quality compression I see just grey colour screen and on lower qualities, there is a green colour,stripes, sound only.
I've seen that video recording should be working already couple of versions ago, so what am I doing wrong?
I'm using CWM 6.0.4.7, but before I was trying that on CWM 5 with the same result. Please help.
Click to expand...
Click to collapse
replace the camera app with one from cm 11 by jenkins build and see if it is working or not
sexipsik said:
Hey there,
I'm using this Mardon's ROM -> [ROM][CM10.2] - modded - [stable-20140126]
links's here: http://forum.xda-developers.com/showthread.php?t=2442024
I've got an issue with camera - I reboot to recovery, wipe data/factory reset, format/system, install ROM, install hotfix, reboot - just like in instruction. And when I try to record video with camera app (Gallery2.apk)- on high quality compression I see just grey colour screen and on lower qualities, there is a green colour,stripes, sound only.
I've seen that video recording should be working already couple of versions ago, so what am I doing wrong?
I'm using CWM 6.0.4.7, but before I was trying that on CWM 5 with the same result. Please help.
Click to expand...
Click to collapse
I would suggest you to flash this rom and hotfix again from CWM 5. It could be CWM 6 causing the problem as CWM 6 is still not stable. I know you have already done this, but as I have gone through the Mardon's thread, no one else had such a problem when flashed through CWM 5. Also there is a new stable release. Before flashing, do Wipe Data/Factory reset, Wipe Cache partitions, Mount & Storage>Format system, Wipe Dalvik Cache and Wipe Battery Stats. Do post your result. Hope I Helped
aditya rathee said:
replace the camera app with one from cm 11 by jenkins build and see if it is working or not
Click to expand...
Click to collapse
Since there are changes in the API's from CM 10 to CM 11, I don't know if the Camera app from CM 11 will work on CM 10. But it's still worth a try
Will try out!
mahithm said:
I would suggest you to flash this rom and hotfix again from CWM 5. It could be CWM 6 causing the problem as CWM 6 is still not stable. I know you have already done this, but as I have gone through the Mardon's thread, no one else had such a problem when flashed through CWM 5. Also there is a new stable release. Before flashing, do Wipe Data/Factory reset, Wipe Cache partitions, Mount & Storage>Format system, Wipe Dalvik Cache and Wipe Battery Stats. Do post your result. Hope I Helped
Since there are changes in the API's from CM 10 to CM 11, I don't know if the Camera app from CM 11 will work on CM 10. But it's still worth a try
Click to expand...
Click to collapse
At first - thanks for reply. I'm going to try it out and post my experience here. The only problem for me is time.
What version of CWM 5 do you advice to me? It is necessary to flash stock rom via Odin, root again and then flash new CWM via Odin, is it?
mahithm said:
I would suggest you to flash this rom and hotfix again from CWM 5. It could be CWM 6 causing the problem as CWM 6 is still not stable. I know you have already done this, but as I have gone through the Mardon's thread, no one else had such a problem when flashed through CWM 5. Also there is a new stable release. Before flashing, do Wipe Data/Factory reset, Wipe Cache partitions, Mount & Storage>Format system, Wipe Dalvik Cache and Wipe Battery Stats. Do post your result. Hope I Helped
Since there are changes in the API's from CM 10 to CM 11, I don't know if the Camera app from CM 11 will work on CM 10. But it's still worth a try
Click to expand...
Click to collapse
still if this does not work bro try camera app of last stable build of cm 10 made by jenkins
also HAPPY HOLI { it is a festival of colors in india}
sexipsik said:
At first - thanks for reply. I'm going to try it out and post my experience here. The only problem for me is time.
What version of CWM 5 do you advice to me? It is necessary to flash stock rom via Odin, root again and then flash new CWM via Odin, is it?
Click to expand...
Click to collapse
Your only option is to flash the stock rom using odin. Here is the link on how to install stock rom using odin,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. As for rooting and installing CWM 5, goto stock recoveymod, choose "apply update from sdcard", then choose the root package first. Perform similar steps to install CWM 5 too and then choose "Reboot system now". Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I Helped
---------- Post added at 11:03 AM ---------- Previous post was at 10:51 AM ----------
aditya rathee said:
still if this does not work bro try camera app of last stable build of cm 10 made by jenkins
also HAPPY HOLI { it is a festival of colors in india}
Click to expand...
Click to collapse
Happy Holi to you and your family too, Bro
mahithm said:
Your only option is to flash the stock rom using odin. Here is the link on how to install stock rom using odin,
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Once installed, go to recoverymod and do a wipe data/ factory reset & wipe cache (otherwise bootloop might occur). Then restart. Now you have successfully flashed the stock rom. As for rooting and installing CWM 5, goto stock recoveymod, choose "apply update from sdcard", then choose the root package first. Perform similar steps to install CWM 5 too and then choose "Reboot system now". Here is the link for rooting and installing CWM 5 on Samsung Galaxy Ace,
How To Root and Unroot Samsung Galaxy Ace?
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Hope I Helped
---------- Post added at 11:03 AM ---------- Previous post was at 10:51 AM ----------
Happy Holi to you and your family too, Bro
Click to expand...
Click to collapse
have fun and tell me after trying my method if it worked or not
Suprise, suprise...
aditya rathee said:
have fun and tell me after trying my method if it worked or not
Click to expand...
Click to collapse
Dear friends,
Mr. Mardon released new stable CM 10.2 with included hotfix! I tried that with CWM 6 and... still same ****.
Then I did it your way - flashed stock ROM, root, install CWM 5.0.2.6, installed new stable release (in Submit bug section there was my post marked as ''resolved'') and - NOTHING!
The only change is that on ''extreme'' quality compression, I get same green stripes as on other qualities instead of just grey screen. One guy there (at least one - one who posted that too) has the same problem. It's really frustrating for me...
At this moment I have CM 7.2 adrenalin ROM in device and... thinking about future :laugh:
What you mean, guys?
sexipsik said:
Dear friends,
Mr. Mardon released new stable CM 10.2 with included hotfix! I tried that with CWM 6 and... still same ****.
Then I did it your way - flashed stock ROM, root, install CWM 5.0.2.6, installed new stable release (in Submit bug section there was my post marked as ''resolved'') and - NOTHING!
The only change is that on ''extreme'' quality compression, I get same green stripes as on other qualities instead of just grey screen. One guy there (at least one - one who posted that too) has the same problem. It's really frustrating for me...
At this moment I have CM 7.2 adrenalin ROM in device and... thinking about future :laugh:
What you mean, guys?
Click to expand...
Click to collapse
I'm sorry to hear that it's not working. Since there is no change even after flashing through CWM 5.0.2.6, this must be a rom related problem. Since you already have 10 posts, now you can directly post this question in the corresponding rom thread so that the owner @Mardon can reply it. Please post the solution here nonetheless so that if anyone encounter the same problem, they will know what to do. Hope I Helped
Related
Hi everyone,
Newbie posting here.. I've had my share of flashing Roms a few times (say 4 or 5 times) but i stuck with cm 7.2 when they released the stable mod for the i9000.
Now i see that the cm9 stable mod has been released and i definitely want to try that out however, I'm not sure on how to go about it and I don't want to do anything stupid. Don't get me wrong, i've tried reading around through different sites and forums but all the mix and match methods of flashing and installing has gotten me confused..
My main question is, how do i flash to cm9 from cm 7.2? naturally i have cwm installed and can boot into cwm recovery. Am on the XXJVK baseband with the pawitp kernel. Not sure if i have to donwload new drivers (since the base ROM is going to change)...
Do i just place the zip file for the cm9 mod in the internal sd storage? could you guys help me out and let me know if this process is correct:
1) save zip file in internal storage (both cm9 and gapps)
2) do a nandroid backup
3) boot into recovery
4) wipe data and dalvik cache
5) install the package
6) wipe data and dalvik cache
7) install gapps
8) reboot
Once it boots up, i'm assuming it'll be running cm9 already.. could you guys help me out and let me know if this procedure's correct? sorry for the noob question but i'd rather just make sure and ask you guys first.
thanks in advance guys! cheers and more power!
ablack01 said:
Hi everyone,
Newbie posting here.. I've had my share of flashing Roms a few times (say 4 or 5 times) but i stuck with cm 7.2 when they released the stable mod for the i9000.
Now i see that the cm9 stable mod has been released and i definitely want to try that out however, I'm not sure on how to go about it and I don't want to do anything stupid. Don't get me wrong, i've tried reading around through different sites and forums but all the mix and match methods of flashing and installing has gotten me confused..
My main question is, how do i flash to cm9 from cm 7.2? naturally i have cwm installed and can boot into cwm recovery. Am on the XXJVK baseband with the pawitp kernel. Not sure if i have to donwload new drivers (since the base ROM is going to change)...
Do i just place the zip file for the cm9 mod in the internal sd storage? could you guys help me out and let me know if this process is correct:
1) save zip file in internal storage (both cm9 and gapps)
2) do a nandroid backup
3) boot into recovery
4) wipe data and dalvik cache
5) install the package
6) wipe data and dalvik cache
7) install gapps
8) reboot
Once it boots up, i'm assuming it'll be running cm9 already.. could you guys help me out and let me know if this procedure's correct? sorry for the noob question but i'd rather just make sure and ask you guys first.
thanks in advance guys! cheers and more power!
Click to expand...
Click to collapse
wipe date
wipe cache
wipe delvik cache
then flash rom nd gapps
wipe cache nd delvik cache again.. good luck..
Best and most reliable way to do this is flashing through stock rom via Odin. Then flashing kernel with CWM Recovery via Odin. And only then flash CM9 via CWM.
thanks for the quick reply guys. will try it out tonight and update this post. hope all goes well.
cheers!
bmwchampz said:
wipe date
wipe cache
wipe delvik cache
then flash rom nd gapps
wipe cache nd delvik cache again.. good luck..
Click to expand...
Click to collapse
and if u want u can try chimera rom from team passion.. it s combination of cm9 and AOKP.. It s stable and fast..
took me less than 10 minutes to flash to cm9 and it's as snappy as i thought it was. now to fix up everything and check if everything's okay.
so far, wifi and network signal are working fine and dandy. might just have a go at that chimera rom.
Hello, can some one help me with this issue please, this has never happened to me before, I really don't know what is wrong or how to fix it. I want to try out TheWhisp's CM10 rom on my S6500D, I follow instructions that few ppl posted in the original thread of the rom.
Download rom
Go to squadzone CWM
Wipe data
Install zip
Reboot
I follow that tutorial, I download latest 13.2 update/build or w/e, I have squadzone's 5.0.2.8 CWM, I'm on a stock rom and I'm rooted aswell, so I reboot in CWM, wipe data/factory reset, then Instal zip from sd card, when it tries to instal I get that status 7 error, it say's something about build.prop, I looked around and saw that you can delete something at the beggining when you open updater file and I did that but then It starts to instal but finishes really quickly, less then a minute. Shouldn't it take longer? When it instals I reboot my phone it gets stuck at the screen after Samsung one, on the one where it says Samsung GT-S6500D and then goes into bootloop, can someone help me with this please. Maybe i deleted wrong strings or w/e it's called in updater? I also tried wipe cache + dalvik cache + battery stats
are you sure you used the rom for mini 2 i think the one you flashed was for mini
dheeraj (dhlalit11) said:
are you sure you used the rom for mini 2 i think the one you flashed was for mini
Click to expand...
Click to collapse
Yea I'm sure I was flashing the right one. Anyways I fixed it today, the problem was in my kernel, I flashed squadzone's kernel and it worked perfectly, now I have cm10 on my lil' SGM2 . Well hope this helps if anyone else is having problem like this and sorry for bothering.
Hi fellows,
I need your guidance and expert advice in resolving a situation, I have ran into recently. I was trying to install CM10.1 on my brother's galaxy Note GT-N7000 international version which was running official ICS 4.0.4.
Since, I had experience in installing different ROMs on my Galaxy S2, Nexus 7 and Xperia Arc so I was not worried about it being a big deal. So, I followed the procedure described in this page http://techgoneinsane.blogspot.com/2012/08/installing-cm10-on-galaxy-note-n7000.html?m=1 and used Odin and file from 'speedmod' to gain root access and flash CWM which was successful. Then, as planned, I tried update zip in the CWM recovery for CM10.1 nightly. But, I came across error 'Status 7' installation aborted. This was new to me, so I tried few things like 'factory reset', wipe data etc and even tried installing stock ROM ICS XXLRK which was previously installed but no avail. I tried several other ROMs like stable CM9 and other nightlies but no success. The phone is stuck on the boot Samsung logo with yellow triangle. However, I'm able to go in the recovery and download mode.
Upon doing couple of Google searches, I came to know, quite a number of people have faced this error by I couldn't understand the fix properly so can anyone of you please guide me for the solution. Thanks.
Your help will be greatly appreciated.
perceptorz said:
Hi fellows,
I need your guidance and expert advice in resolving a situation, I have ran into recently. I was trying to install CM10.1 on my brother's galaxy Note GT-N7000 international version which was running official ICS 4.0.4.
Since, I had experience in installing different ROMs on my Galaxy S2, Nexus 7 and Xperia Arc so I was not worried about it being a big deal. So, I followed the procedure described in this page http://techgoneinsane.blogspot.com/2012/08/installing-cm10-on-galaxy-note-n7000.html?m=1 and used Odin and file from 'speedmod' to gain root access and flash CWM which was successful. Then, as planned, I tried update zip in the CWM recovery for CM10.1 nightly. But, I came across error 'Status 7' installation aborted. This was new to me, so I tried few things like 'factory reset', wipe data etc and even tried installing stock ROM ICS XXLRK which was previously installed but no avail. I tried several other ROMs like stable CM9 and other nightlies but no success. The phone is stuck on the boot Samsung logo with yellow triangle. However, I'm able to go in the recovery and download mode.
Upon doing couple of Google searches, I came to know, quite a number of people have faced this error by I couldn't understand the fix properly so can anyone of you please guide me for the solution. Thanks.
Your help will be greatly appreciated.
Click to expand...
Click to collapse
If you are on Speedmod's recovery (which is safe), you can try this:
1) Download the latest CM10.1 kernel and save it to your SD card.
2) Flash it in Recovery (Install zip from sdcard > choose zip from sdcard), then reboot in the new Recovery (advanced > reboot recovery).
3) Do a full wipe (even format preload and system in "mounts")
3) Flash the latest CM10.1 build
4) Flash the 4.2.2 Gapps
5) Do a data wipe / factory reset
6) Reboot
You got a yellow triangle because you flashed an unofficial kernel through Odin. To get rid of it, use TriangleAway.
Good luck!
Solved
Kortxero said:
If you are on Speedmod's recovery (which is safe), you can try this:
1) Download the latest CM10.1 kernel and save it to your SD card.
2) Flash it in Recovery (Install zip from sdcard > choose zip from sdcard), then reboot in the new Recovery (advanced > reboot recovery).
3) Do a full wipe (even format preload and system in "mounts")
3) Flash the latest CM10.1 build
4) Flash the 4.2.2 Gapps
5) Do a data wipe / factory reset
6) Reboot
You got a yellow triangle because you flashed an unofficial kernel through Odin. To get rid of it, use TriangleAway.
Good luck!
Click to expand...
Click to collapse
Thanks a lot man. Issue has been resolved by following your procedure and phone is working all fine with CM10.1 on it. Xda rocks!!!
perceptorz said:
Thanks a lot man. Issue has been resolved by following your procedure and phone is working all fine with CM10.1 on it. Xda rocks!!!
Click to expand...
Click to collapse
You're welcome. Glad I could help . If you feel like it, hit the Thanks button on Chasmodo's first message in the repository (where you downloaded your CM10.1 kernel). He really deserves it. You may also want to do the same on Entropy's first post in the unofficial CM10.1 thread :good: That way, you'll show your support and appreciation :angel:.
I am currently running V20a EURxx the one that everyone was downloading a while back, via the lg suite hack..
I have installed the all-in-one root tool and "think" i have rooted it but i found it to be very confusing
Cyanogenmod 10.1 (the one that came out yesterday) is what i want. http://forum.xda-developers.com/showthread.php?t=2238040
so.....
What are the steps i have to take? I have rooted and done custom roms in the past but am still kind of a n00b.. Please help a fellow XDA member
ragdoll20 said:
I am currently running V20a EURxx the one that everyone was downloading a while back, via the lg suite hack..
I have installed the all-in-one root tool and "think" i have rooted it but i found it to be very confusing
Cyanogenmod 10.1 (the one that came out yesterday) is what i want. http://forum.xda-developers.com/showthread.php?t=2238040
so.....
What are the steps i have to take? I have rooted and done custom roms in the past but am still kind of a n00b.. Please help a fellow XDA member
Click to expand...
Click to collapse
You have the steps right there in the first post. I'll leave some explanations
You need cwm (clockwordmod recovery) first. The easiest way to install it is via rommanager https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en. Use rommanager to flash cwm.
Once cwm is installed. Then proceed.
1. Place cm-10.1-20130416-NIGHTLY-p880.zip and gapps-jb-20130301-signed.zip in to your internal sdcard
- Download cm http://get.cm/get/jenkins/25315/cm-10.1-20130417-NIGHTLY-p880.zip
- Download gapps http://goo.im/gapps/gapps-jb-20130301-signed.zip
- Move the files to your internal sdcard
You need to be in cwm recovery for the next steps. To do this you need to power off your phone, Hold VolUp and Power Button at the same time to power on your phone. Wait till you get to cwm recovery console.
2. BACKUP ALL YOUR DATA with CWM Recovery
- In cwm console select backup. use vol+/vol- to navigate through the menus and use power button to select the option.
3. In CWM Recovery make wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system
- These options can also be found in cwm
4. Flashcm-10.1-20130416-NIGHTLY-p880.zip from sdcard
- Still in cwm. Select Install zip from sdcard -> choose zip from sdcard -> navigate to where you put cm-10.1-20130416-NIGHTLY-p880.zip
5. Gapps-jb-20130301-signed.zip from sdcard
- Still in cwm. Select Install zip from sdcard -> choose zip from sdcard -> gapps-jb-20130301-signed.zip
6. Done
- Reboot
I'm not an expert, but that is how I did it.
ragdoll20 said:
I am currently running V20a EURxx the one that everyone was downloading a while back, via the lg suite hack..
I have installed the all-in-one root tool and "think" i have rooted it but i found it to be very confusing
Cyanogenmod 10.1 (the one that came out yesterday) is what i want. http://forum.xda-developers.com/showthread.php?t=2238040
so.....
What are the steps i have to take? I have rooted and done custom roms in the past but am still kind of a n00b.. Please help a fellow XDA member
Click to expand...
Click to collapse
Actually, the first thing you must do is unlock the bootloader. For now, the only sure versions are EUR-XXX (and to be clear, it's not enough that you installed the Euro-Open FW, your phone must have the software identified as EUR-XXX - for instance, german sim-free phones will be identified as 262-000, even if they install Euro-Open FW, and they don't seem to be unlockable as of yet).
So, check the software version (at system settings -> phone info -> software information -> software version) and, if it's Eur-XXX or something similar, you can unlock the bootloader.
If you're using the all-in-one tool, you just have to follow the instructions on it's thread to unlock the bootloader.
Only then can you install CM with the method akosierwin provided.
Okay i followed the steps and installed clockwork mod via the rom manager...BUT!
If i boot into recovery it says: LG Security,ERROR boot image signature, 5 seconds shut down something something...
Whats that all about? thanks for the fast reply's!
you need to unlock your bootloader first
Yep, unlock your bootloader first.
Here are the steps for that
http://forum.xda-developers.com/showthread.php?t=2224020
Okay i unlocked the bootloader ( when im in the S/W upgrade screen it says unlocked at the top..) i have clockworkmod installed but i cant install anything... All the zips give: assert failed,status 7.. Now im in a bootloop. I can go into clockword mod but thats about it. I have tried other zips than the Nightlys from cyanogen but nothing works. WTF
ragdoll20 said:
Okay i unlocked the bootloader ( when im in the S/W upgrade screen it says unlocked at the top..) i have clockworkmod installed but i cant install anything... All the zips give: assert failed,status 7.. Now im in a bootloop. I can go into clockword mod but thats about it. I have tried other zips than the Nightlys from cyanogen but nothing works. WTF
Click to expand...
Click to collapse
In the general section there's a thread callled flashable CM 10.1 FIX P880 (or similar).
The status 7 error occurs because of a little line (p880 instead of x3 for device recognition).
Install the CM from there or try to reinstall CWM through ROM Manager (should be latest and working)
And don't forget the GApps (from goo.im or the thread with the fixed CM)
EDIT: Link to the fix http://forum.xda-developers.com/showthread.php?t=2238814
ImInMunichBitch said:
In the general section there's a thread callled flashable CM 10.1 FIX P880 (or similar).
The status 7 error occurs because of a little line (p880 instead of x3 for device recognition).
Install the CM from there or try to reinstall CWM through ROM Manager (should be latest and working)
And don't forget the GApps (from goo.im or the thread with the fixed CM)
EDIT: Link to the fix http://forum.xda-developers.com/showthread.php?t=2238814
Click to expand...
Click to collapse
Thanks a bunch! I didnt find that thread, i will try it now!
ImInMunichBitch said:
In the general section there's a thread callled flashable CM 10.1 FIX P880 (or similar).
The status 7 error occurs because of a little line (p880 instead of x3 for device recognition).
Install the CM from there or try to reinstall CWM through ROM Manager (should be latest and working)
And don't forget the GApps (from goo.im or the thread with the fixed CM)
EDIT: Link to the fix http://forum.xda-developers.com/showthread.php?t=2238814
Click to expand...
Click to collapse
IT WORKED!! YOU JUST MADE MY DAY! PM me and i'll give your reward :laugh:
ragdoll20 said:
IT WORKED!! YOU JUST MADE MY DAY! PM me and i'll give your reward :laugh:
Click to expand...
Click to collapse
I'm glad that I helped you, but I really don't want some kind of reward
Just click the thanks button and donate to our developers if you want to give a reward
to the people who deserve it
In the steps for installing CM, there is the advice to do a nandroid backup of the existing system!
Is it possible, after wiping and installing CM 10.1, to restore only data, so I would have all my Apps and Userdata back, or would this cause problems with CM 10.1 settings?
Has someone tried this already?
Is CWM after wiping and installing still present?
Bogeyof said:
In the steps for installing CM, there is the advice to do a nandroid backup of the existing system!
Is it possible, after wiping and installing CM 10.1, to restore only data, so I would have all my Apps and Userdata back, or would this cause problems with CM 10.1 settings?
Has someone tried this already?
Is CWM after wiping and installing still present?
Click to expand...
Click to collapse
CWM ist still installed after CM 10.1 flash.
If you want to have your apps + data back install titanium,
though I don't really know about restoring a backup on CM
(but it's a different android so I think it wouldn't work)
ImInMunichBitch said:
CWM ist still installed after CM 10.1 flash.
If you want to have your apps + data back install titanium,
though I don't really know about restoring a backup on CM
(but it's a different android so I think it wouldn't work)
Click to expand...
Click to collapse
Thanks, but I tried with Titanium Backup on V20a (after wiping and installing V20a over V10h) and not all Apps was correctly restored, settings of system, all the screens of Nova Launcher, the Widgets and their settings and many more was wrong or not restored, so I tried with restoring only "data" from CWM-Backup and it works perfectly...
Anyone tried this on CM 10.1?
Glad that it worked
Didn't know that.
Sent from my LG-P880
I got used exhibit from my brother. my exhibit was on gingerbread. when i went to recovery mode , it was already cwm 6.0.4.5 . i downloaded cm 11 and gapps and copied it to my phone. i wiped dalvik cache , system , data , and cache . but when I try to install the .zip package it always suddenly aborted without notification. any suggestions ?
rahadyanharits said:
I got used exhibit from my brother. my exhibit was on gingerbread. when i went to recovery mode , it was already cwm 6.0.4.5 . i downloaded cm 11 and gapps and copied it to my phone. i wiped dalvik cache , system , data , and cache . but when I try to install the .zip package it always suddenly aborted without notification. any suggestions ?
Click to expand...
Click to collapse
Hey there! Unfortunately Cyanogenmod 11 has had a bad reputation on the Galaxy Exhibit 4G. You're not the only one who is experiencing problems getting the ROM to run. If you can't install the ROM via recovery I can only imagine the problems you'll encounter when you do install it; constant FC, random reboots, etc. My suggestion is to try an older version of Android if you're looking for stability. My personal suggestion would be CM 10 with 2.6 kernel. I love that ROM. Anyways, here are a few things you can try.
Install different recovery versions. You can start with these ones and see which one allows you to install the ROM successfully.
CWM 6.0.4.4 http://blownco.com/index.php/doc_download/13661-cwm-6-0-4-4-exhibit
CWM 6.0.4.5 http://d-h.st/aTo
CWM 6.0.4.6 http://d-h.st/owg
CWM 6.0.4.7 http://d-h.st/tSN
TWRP 2.6.3.0 http://d-h.st/kjr
If you're able to successfully install the ROM proceed to the reboot and if you don't get any FC, reboots or whatnot you're one of the lucky ones. If you do run into issues, then wipe everything, install the rom, gapps and then this kernel. http://d-h.st/kha
That's pretty much all you can do now. Development here has waned, so I'm not sure the issues will ever get fixed. Good luck!
You should try out cwm 6.0.4.7. just got released. I got it with no probs. running the kernel jorge007 has posted. Build number 1/23 with stable 1.4ghz oc