Related
Hi guys,
First post here but have used this site multiple times as a non-member. Hoping you guys can fix my problem :laugh:
Right, so basically, I like to flash ALOT of roms onto my N7000 and for some reason or another, around 3 roms i have just flashed in the last couple of hours keeps making my phone get stuck in a bootloop and it is really starting to annoy me.
If anyone has a solution I would be grateful.
Thanks in advance, Rohan
Insufficient info. What rom were you on? What's the last rom you installed? What was the latest rom installed on(rom) ? Are you on a safe kernel? Did you wipe data?
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
Insufficient info. What rom were you on? What's the last rom you installed? What was the latest rom installed on(rom) ? Are you on a safe kernel? Did you wipe data?
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
I'm currently on ParaNoid Android (scared to reboot), the last rom I was on is Cynogenmod, the last rom I have installed were the two roms I just mentioned. I am on 3.0.15-CM-g0b7eacb [email protected] #1. And yes, I did wipe data, cache partition and dalvik cache.
I have faced this issue while flashing SuperNexus on my note. check this thread if if helps : link to thread
I recommend a safe kernel like philz latest kernels and then i think you are good to go with any roms.
Hello guys please help topic say it all it just wont take any pictures.. Camera app loads fine then when i press the snap button am stuck like this (pictures attached)
Im on 757 deodexed unlocked boot loader
Sent from my C6903 using xda app-developers app
try clearing the data in all camera apps in
settings/apps
Tried that already still no avail
Sent from my C6903 using xda app-developers app
Well please elaborate on what you have already done so I don't keep giving you advice that you have already done
Also, knowing which kernel and ROM you are on will help
I tried clearibg cache n data
Forced atop
Disable re enable
Maybe its a hardware issue it only saves front camera pics
I tried turning flash off changed mods
Sent from my C6903 using xda app-developers app
gregbradley said:
Well please elaborate on what you have already done so I don't keep giving you advice that you have already done
Also, knowing which kernel and ROM you are on will help
Click to expand...
Click to collapse
Posted everything i done so far in earlier post forgot to mention changed save directory
Sent from my C6903 using xda app-developers app
Hello nxkr. I also have this EXACT problem. See my post here: http://forum.xda-developers.com/showthread.php?t=2727289
I think that the reply I got was interesting, (the flashin procedures he talke about)
Unfortunately I won't be able to experiment more today, but one thing that hit me, is that I haven't done a real wipe data/factory reset in Philz recovery for some time (have done a few updates). Maybe this should solve the problem?
If you try a full wipe first make a backup of your important apps of course...
Whatever you try from now on, please let me know, I will try everything myself tomorrow, I doubt that the camera is broken, it's just software I think....
which kernel and which ROM?
As I haven't access to the phone today I can't answer that question, but downloads was made from NUT if I remember right.
Also, more duplicates of this problem start to appear, we are not alone on thisone. See:
http://forum.xda-developers.com/showthread.php?t=2706426
I am starting to think that maybe just a kernel update would solve it? Maybe Doomslords kernel? Ahh I want to try but I cannot until tomorrow... Sigh...
I had the same issue, it just cant snap a photo and it can not focus. I had it when i dirty flashed ihackers 4.1 without flashing the full 4.4.2 firmware, the newest one. I solved it by flashing the newest firmware, central europe for me, and then i continued with the fastbooting kernel, installing rom and all the classic stuff. After that the camera works really nice. All i can say is try to flash the full ftf, and then once again your rom of choice, that should get it working properly! Also please do tell what rom and kernel you are using. I use doom btw and its working fine.
VR2014 said:
As I haven't access to the phone today I can't answer that question, but downloads was made from NUT if I remember right.
Also, more duplicates of this problem start to appear, we are not alone on thisone. See:
http://forum.xda-developers.com/showthread.php?t=2706426
I am starting to think that maybe just a kernel update would solve it? Maybe Doomslords kernel? Ahh I want to try but I cannot until tomorrow... Sigh...
Click to expand...
Click to collapse
Right now am using Doom kernel even before the problem was there
gregbradley said:
which kernel and which ROM?
Click to expand...
Click to collapse
deodexed 757 doom kernel
VR2014 said:
Hello nxkr. I also have this EXACT problem. See my post here: http://forum.xda-developers.com/showthread.php?t=2727289
I think that the reply I got was interesting, (the flashin procedures he talke about)
Unfortunately I won't be able to experiment more today, but one thing that hit me, is that I haven't done a real wipe data/factory reset in Philz recovery for some time (have done a few updates). Maybe this should solve the problem?
If you try a full wipe first make a backup of your important apps of course...
Whatever you try from now on, please let me know, I will try everything myself tomorrow, I doubt that the camera is broken, it's just software I think....
Click to expand...
Click to collapse
I did a full wipe data before flashing but it was with Philz sometimes it doesn't work as good as cwm or twrp will check out your thread.. Do you recommend keeping same id in titanium backup
thanks all
Sent from my C6903 using xda app-developers app
Hello everyone, I have been lurking for a long time and I just want to say what a great community this is and thank you to everyone who develops and/or contributes. I have learned everything I know about android dev from reading these forums and I am confident enough now to start posting and trying to offer whatever I can from my experiences. Now for my question
What is the general opinion about flashing nightly builds? Is it generally only for people who are testing/debugging? I am running cm-11-20140805-NIGHTLY-moto_msm8960_jbbl on my Atrix HD right now and I am very happy with it - in fact I am ecstatic to have found a 4.4.4 rom that works smooth, fast, and stable for me (I got tired of waiting for AT&T to release their OTA update!). Consider this a positive endorsement of it. However, I see that new builds were released on 8/9 and 8/10 (as I would expect for nightly builds to be updated often, of course). I looked at the changelogs and I don't fully understand every last thing I see there, but I have not encountered any issues with the build I am running, so should I bother to flash the newest nightly releases when they come out? Is there a way to update without resetting everything or should I just restore my apps with Titanium Backup after flashing a new nightly? Finally, what is the best way for me to contribute to development (short of submitting code myself, as I do not feel confident enough to do so just yet)?
Since it seems I am not allowed to have a sig until I reach a certain number of posts(?) I will post my current devices below:
AT&T Motorola Atrix HD MB886
ClockworkMod Recovery v6.0.4.4
CyanogenMod 11 cm-11-20140805-NIGHTLY-moto_msm8960_jbbl (KK 4.4.4)
pa_gapps-stock-4.4.4-20140804-signed
Acer Iconia A500
Skrilax_CZ's Bootloader v8
ClockworkMod Recovery Thor v1.7.3
CyanogenMod 10.2 cm-10.2-20131004-UNOFFICIAL-a500 (JB 4.3)
P.S. - special thanks to the Myth Team, Djrbliss, skeevydude, leanix, osm0sis, chainfaire, PhilZ for making it super easy to root and unlock my phone :good:
Fanarkle said:
Hello everyone, I have been lurking for a long time and I just want to say what a great community this is and thank you to everyone who develops and/or contributes. I have learned everything I know about android dev from reading these forums and I am confident enough now to start posting and trying to offer whatever I can from my experiences. Now for my question
What is the general opinion about flashing nightly builds? Is it generally only for people who are testing/debugging? I am running cm-11-20140805-NIGHTLY-moto_msm8960_jbbl on my Atrix HD right now and I am very happy with it - in fact I am ecstatic to have found a 4.4.4 rom that works smooth, fast, and stable for me (I got tired of waiting for AT&T to release their OTA update!). Consider this a positive endorsement of it. However, I see that new builds were released on 8/9 and 8/10 (as I would expect for nightly builds to be updated often, of course). I looked at the changelogs and I don't fully understand every last thing I see there, but I have not encountered any issues with the build I am running, so should I bother to flash the newest nightly releases when they come out? Is there a way to update without resetting everything or should I just restore my apps with Titanium Backup after flashing a new nightly? Finally, what is the best way for me to contribute to development (short of submitting code myself, as I do not feel confident enough to do so just yet)?
Since it seems I am not allowed to have a sig until I reach a certain number of posts(?) I will post my current devices below:
AT&T Motorola Atrix HD MB886
ClockworkMod Recovery v6.0.4.4
CyanogenMod 11 cm-11-20140805-NIGHTLY-moto_msm8960_jbbl (KK 4.4.4)
pa_gapps-stock-4.4.4-20140804-signed
Acer Iconia A500
Skrilax_CZ's Bootloader v8
ClockworkMod Recovery Thor v1.7.3
CyanogenMod 10.2 cm-10.2-20131004-UNOFFICIAL-a500 (JB 4.3)
P.S. - special thanks to the Myth Team, Djrbliss, skeevydude, leanix, osm0sis, chainfaire, PhilZ for making it super easy to root and unlock my phone :good:
Click to expand...
Click to collapse
Nightly builds are just that, builds that are made nightly. They are the most up to date. Snapshots/M(*insert number here*) releases are generally more stable, but we got knocked out of being eligible for them after the release of M8 (thanks kk bootloader). CM has made a msm8960 jb bl section, which you did find. This might get us up and running for a M10 next month if they choose to do that, but then again, msm8960 did not get a M9. Nightly's are for everyone. CM makes a few tweaks to their code and pushes it to each nightly. Some tweaks make it better, some tweaks make it worse. If you are satisfied with the release that you currently are running, you don't need to flash the update if you don't want to. Since you would be flashing an update, you just flash it, no backups of apps. Now if you were going from CM11 down to CM10, 10.1, or 10.2, then yes, back them up b/c you'd wipe those partitions before flashing the ROM.
Sent from my MB886 using XDA Free mobile app
palmbeach05 said:
Since you would be flashing an update, you just flash it, no backups of apps. Now if you were going from CM11 down to CM10, 10.1, or 10.2, then yes, back them up b/c you'd wipe those partitions before flashing the ROM.
Click to expand...
Click to collapse
How would I go about updating without losing anything? Do I just boot into recovery, wipe only delvik cache, and flash cm-11-20140810-NIGHTLY-moto_msm8960_jbbl.zip? Or is there a separate file just for updating? If I don't have to set everything up all over again after each nightly then I will gladly keep updating and providing feedback.
Fanarkle said:
How would I go about updating without losing anything? Do I just boot into recovery, wipe only delvik cache, and flash cm-11-20140810-NIGHTLY-moto_msm8960_jbbl.zip? Or is there a separate file just for updating? If I don't have to set everything up all over again after each nightly then I will gladly keep updating and providing feedback.
Click to expand...
Click to collapse
You can just clear cache in recovery then flash the update and it would keep all of your settings, data, everything the same. It is not recommended. If you have enough space, you can nand backup your current version and that eliminates the risk of losing everything if updating doesn't work, but it's recommended that you wipe cache and wipe data before flashing a new nightly. I've rarely had a problem flashing a nightly on top of my existing build without wiping data, but to each his own.
Just make sure you're flashing the jbbl nightlies and you should be fine.
Dr. Orange said:
You can just clear cache in recovery then flash the update and it would keep all of your settings, data, everything the same. It is not recommended. If you have enough space, you can nand backup your current version and that eliminates the risk of losing everything if updating doesn't work, but it's recommended that you wipe cache and wipe data before flashing a new nightly. I've rarely had a problem flashing a nightly on top of my existing build without wiping data, but to each his own.
Just make sure you're flashing the jbbl nightlies and you should be fine.
Click to expand...
Click to collapse
When you say "clear cache", do you mean "wipe cache partition," "format /cache," or "wipe delvik cache?" So basically what you are saying is that it is possible to flash a nightly on top of an existing build without losing anything but it is generally not recommended? I always create a backup image before I flash anything so no problem there.
Yes. Wipe cache. It will format automagically. You can wipe dalvik cache as well. Usually I just select the first "wipe cache" option in clockworkmod recovery then start flashing. Works 99% of the time.
Some say they develop problems doing it that way, but I've never had an issue with it. Maybe my phones (I had a moto bravo before the atrix hd) just like me.
Fanarkle said:
So basically what you are saying is that it is possible to flash a nightly on top of an existing build without losing anything but it is generally not recommended? I always create a backup image before I flash anything so no problem there.
Click to expand...
Click to collapse
Dr. Orange said:
You can wipe dalvik cache as well. Usually I just select the first "wipe cache" option in clockworkmod recovery then start flashing. Works 99% of the time.
Some say they develop problems doing it that way, but I've never had an issue with it. Maybe my phones (I had a moto bravo before the atrix hd) just like me.
Click to expand...
Click to collapse
The method of flashing over-top of an existing ROM is referred to as "dirty flashing". The issue isn't so much that it's not recommended or that it develops problems, but it could potentially develop problems, because there's always a chance that the new build relies on some random file that should have been deleted, changed, etc.
So, in summary, it's perfectly fine to dirty flash a CM nightly over your existing version, especially if it works fine for you. HOWEVER, if you develop problems, then you should refrain from reporting them until you have done a CLEAN wipe of everything and installed clean from scratch. If you still have an issue after a clean install, then feel free to report any issues as "bugs."
quasihellfish said:
if you develop problems, then you should refrain from reporting them until you have done a CLEAN wipe of everything and installed clean from scratch. If you still have an issue after a clean install, then feel free to report any issues as "bugs."
Click to expand...
Click to collapse
OK, thanks. What is the best avenue and method of reporting bugs if I do find any after a clean install? xda-forums? Cyanogenmod.org? Directly from the phone?
Fanarkle said:
OK, thanks. What is the best avenue and method of reporting bugs if I do find any after a clean install? xda-forums? Cyanogenmod.org? Directly from the phone?
Click to expand...
Click to collapse
Depends on how confident you are
I usually just ask/report in the appropriate XDA thread and look for feedback. There is a thread for the Atrix HD, but the thread for the RazrHD is much more active. You'll get a lot more activity and responses in the RazrHD thread because it's essentially the same device, just be sure to note that you're on the JB bootloader.
I suppose if you're really sure of a "bug", you could always report it at cyanogenmod.org, but I've never felt to be in the right position to do that.
quasihellfish said:
Depends on how confident you are
I usually just ask/report in the appropriate XDA thread and look for feedback. There is a thread for the Atrix HD, but the thread for the RazrHD is much more active. You'll get a lot more activity and responses in the RazrHD thread because it's essentially the same device, just be sure to note that you're on the JB bootloader.
I suppose if you're really sure of a "bug", you could always report it at cyanogenmod.org, but I've never felt to be in the right position to do that.
Click to expand...
Click to collapse
Thanks, I will stick with XDA then :good: I was looking at jira.cyanogenmod.org and I can't figure out how to report anything specific to a nighly build anyway What is the useful/relevant information that I should post (besides what build I am running) to be the most helpful? i.e. How do I generate a log/report with all the relevant info?
Fanarkle said:
Thanks, I will stick with XDA then :good: I was looking at jira.cyanogenmod.org and I can't figure out how to report anything specific to a nighly build anyway What is the useful/relevant information that I should post (besides what build I am running) to be the most helpful? i.e. How do I generate a log/report with all the relevant info?
Click to expand...
Click to collapse
Well, then I just recommend sticking with XDA. If one of the real CM devs/maintainers then recognizes a bug, someone will report it. Or re-ask this question over there, and they can help you.
Why this topic is still open?
Where are the forum admins?
Sent from my GT-I9505 using XDA Free mobile app
RatusNatus said:
Why this topic is still open?
Where are the forum admins?
Click to expand...
Click to collapse
Did I do something wrong? I am creating a backup and "dirty" flashing the latest nightly right now. I was going to post how it went after I finished just so other people would have the info if they were looking for it.
Success! I rebooted into recovery and, after creating a backup, performed "wipe cache partition" and "wipe delvik cache" before installing cm-11-20140811-NIGHTLY-moto_msm8960_jbbl.zip on top of the build I was running. I rebooted and everything is as it was, except that my custom boot animation was reverted back to CM default (which was expected, no big deal) and the new version I flashed is correctly shown on the "About phone" screen. If I encounter any issues going forward, I will post in the appropriate thread.
Fanarkle said:
Did I do something wrong?
Click to expand...
Click to collapse
No.
RatusNatus said:
Why this topic is still open?
Where are the forum admins?
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
Why did you post here if you had nothing constructive to say?
I'm glad you got it to work fanarkle[emoji4]
[Q&A] [SEP-11][4.4.4-R2][1.3.7][moto_msm8960 & moto_msm8960_jbbl] AOSB Project
Q&A for [SEP-11][4.4.4-R2][1.3.7][moto_msm8960 & moto_msm8960_jbbl] AOSB Project
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
aosb 1.37-arrrrgh kernel
cannot seem to flash arrrrgg's kernel with aosb-just hangs on reboot-i understand that thr kernel gives better battery life--any suggestions?---atrix hd bootloader unlocked,rooted
dabluze said:
cannot seem to flash arrrrgg's kernel with aosb-just hangs on reboot-i understand that thr kernel gives better battery life--any suggestions?---atrix hd bootloader unlocked,rooted
Click to expand...
Click to collapse
which CM kernel are you trying to flash on a AOSP build?
Why is settings asking for su permissions? Am I missing something ?
What are the systcl tweaks on boot operate? If I implement them, what would I expect?<br/>
---------- Post added at 08:30 AM ---------- Previous post was at 08:30 AM ----------
Tried to import contacts and keeps force closing. Even tried syncing via Google account....any ideas?<br/>
Ugh. No body is monitoring
[Q] pac_moto_msm8960_jbbl-nightly-20140915
I downloaded this rom and went by the instructions wiped everything and installed the Kernel , then the rom ,Gapps and as i always do used the converter for US Celluar with the LTE in it. here is what i found.
1- the Kernel I flashed had been replaced
2= rom is more laggy than i expected
3- I t kept wanting to update the Gapps even after i did it
4 When i use the converter with LTE and i go look in acces point network it is always been in there automatically on this rom it was not
I am going back to Mokee it runs so much smoother but will retry this one when some of the bugs are fixed. One thing comes to mind when i did all the wipind and before i started flashing i did not do a factory reset if this may be the problem will someone please let me know
Billc47 said:
I downloaded this rom and went by the instructions wiped everything and installed the Kernel , then the rom ,Gapps and as i always do used the converter for US Celluar with the LTE in it. here is what i found.
1- the Kernel I flashed had been replaced
2= rom is more laggy than i expected
3- I t kept wanting to update the Gapps even after i did it
4 When i use the converter with LTE and i go look in acces point network it is always been in there automatically on this rom it was not
I am going back to Mokee it runs so much smoother but will retry this one when some of the bugs are fixed. One thing comes to mind when i did all the wipind and before i started flashing i did not do a factory reset if this may be the problem will someone please let me know
Click to expand...
Click to collapse
Go to recovery and wipe cache partition. Then reboot. Issues should go. If you want,you could also wipe dalvik.
[Q] pac_moto_msm8960_jbbl-nightly-20140915
marknoll said:
Go to recovery and wipe cache partition. Then reboot. Issues should go. If you want,you could also wipe dalvik.
Click to expand...
Click to collapse
ok I will give that a try later thasnk you
Billc47 said:
I am going back to Mokee it runs so much smoother but will retry this one when some of the bugs are fixed.
Click to expand...
Click to collapse
Mokee it is not really good.
I have to stick with it for a while. It really is not stable even though I use the release version.
------------------
I have tried but still not working heads up.
I can use: Kernel
arrrghhh_Aug2-2014-anyker.zip for aosb_kk_1.3.7_moto_msm8960_jbbl.zip?
Any PlayStore said:
Mokee it is not really good.
I have to stick with it for a while. It really is not stable even though I use the release version.
------------------
I have tried but still not working heads up.
I can use: Kernel
arrrghhh_Aug2-2014-anyker.zip for aosb_kk_1.3.7_moto_msm8960_jbbl.zip?
Click to expand...
Click to collapse
According to arrrghhh's post from may, any kernel means any kernel except stock. You should be good to go
Sent from my ATRIX HD using XDA Free mobile app
I'm using the rom : "aosb_kk_1.3.7_moto_msm8960_jbbl.zip"
and kernel "arrrghhh-May27_2013-CM.zip".
FC contacts after choosing to Import from SIM.
How to fix this. Or I go back to "aosb_kk_1.3.6_mb886.zip"?
tried again
i wiped both as i was suggested to and it made no difference as far as the Gapps keep wanting to update over and over again. I entered the apn manually and that seemed to work Still looking for the best 4.4.4 rom for my Electrify xt901 and one that will improve my battery life depending on the rom 8 hrs is the most i cxan get before it goes dead and yes i had the battery health checked it is good
Billc47 said:
i wiped both as i was suggested to and it made no difference as far as the Gapps keep wanting to update over and over again. I entered the apn manually and that seemed to work Still looking for the best 4.4.4 rom for my Electrify xt901 and one that will improve my battery life depending on the rom 8 hrs is the most i cxan get before it goes dead and yes i had the battery health checked it is good
Click to expand...
Click to collapse
What gapps u running?
pa_gapps-modular-mini-4.4.4-20141019-signed
Its quite possible that those gapps are awry. Try flashing pico. Very minimalistic
would you have a link for them by any chance ? Also this si the kernel i tried flashing arrrghhh-0.18-Stock
and I am using TWRP recovery version 27.01
I have problems with "People"
Click "People" -> Import contacts -> Import from SIM card or Import from storage or Export to SIM card -> Unfortunately, Contacts has stopped.
How to fix ?
I tried to flash it again and again.
Thanks .
I just downladed a different Kernel " arrrghhh_Aug2-2014-anyker " now waiting for what Gapps would be best and will try it again
Billc47 said:
would you have a link for them by any chance ? Also this si the kernel i tried flashing arrrghhh-0.18-Stock
and I am using TWRP recovery version 27.01
Click to expand...
Click to collapse
Can you explain why you tried flashing a custom stock kernel (stock meaning Moto based) on an non stock ROM?
---------- Post added at 08:25 AM ---------- Previous post was at 08:25 AM ----------
Billc47 said:
I just downladed a different Kernel " arrrghhh_Aug2-2014-anyker " now waiting for what Gapps would be best and will try it again
Click to expand...
Click to collapse
The most up to date Gapps or a minimal package Gapps
Resurrection Remix v5.6.8 - Victara
Please note that, I'm not responsible for any damage that it can make on your device or any other problem related of use of this ROM.
Remember: MAKE A COMPLETE NANDROID BACKUP BEFORE FLASHING THIS ROM
Installation(last TWRP recomended:
- Download ROM .Zip
- Download Gapps
- Full wipe and factory reset
- Install ROM .Zip
- Install Gapps
- Reboot
Download:
Mega.nz
All credit goes to the RR team and CM team
Reserved
downloading .................................... and testing
Is this Rom better than Octopus ?
Bryandu13 said:
Is this Rom better than Octopus ?
Click to expand...
Click to collapse
try it yourself, in my opinion is it on many things better. i got also better sot then octOS
Great ROM, i really liked some of the features. Also great performance.
Sent from my XT1095 using XDA Free mobile app
Is this a continuation from the other one that was recently closed? I'm still running on that version with very few bugs and I still have the flash file for it. It's on 5.6.7. Would it be safe for me to dirty flash this one as an update? I wouldn't think there are differences other than an update
---------- Post added at 08:56 AM ---------- Previous post was at 08:36 AM ----------
Bryandu13 said:
Is this Rom better than Octopus ?
Click to expand...
Click to collapse
I have tried octopus rom and in my personal opinion I like resurrection remix a lot more. It has so many more options and runs smoothly with little bugs.
drag0micr0 said:
Is this a continuation from the other one that was recently closed? I'm still running on that version with very few bugs and I still have the flash file for it. It's on 5.6.7. Would it be safe for me to dirty flash this one as an update? I wouldn't think there are differences other than an update
Click to expand...
Click to collapse
Is not a continuation of the another thread, I've build myself because I really liked the RR in victara. Dirty flash can do some unpredictable variables, but here I didn't notice any issues with it.
I've dirty flashed from other 5.6.7-20160409 build to this one, but I don't know if it can work always, so, if you want to try, here some tips:
- Complete Backup( including the /system)
- wipe cache/Dalwik
- Flash the ROM .Zip
- Flash the same GAPPS .Zip file.
Can sby can make Antutu Benchmark and/or Geekbench test ?
cant download.........reason-site is taking too long to load......
jmarcosk said:
Is not a continuation of the another thread, I've build myself because I really liked the RR in victara. Dirty flash can do some unpredictable variables, but here I didn't notice any issues with it.
I've dirty flashed from other 5.6.7-20160409 build to this one, but I don't know if it can work always, so, if you want to try, here some tips:
- Complete Backup( including the /system)
- wipe cache/Dalwik
- Flash the ROM .Zip
- Flash the same GAPPS .Zip file.
Click to expand...
Click to collapse
Okay thank you. I believe I had the same build so I'll try was planning to backup anyhow
After a flash with twrp 3, a factory reset, gaaps, wipe cache/dalvik, I am having an issue with random reboots. Anyone else having this issue?
I've just flashed for 3 hours. So far so good. Not any reboot.
Sent from my XT1096 using XDA-Developers mobile app
bungphe said:
I've just flashed for 3 hours. So far so good. Not any reboot.
Sent from my XT1096 using XDA-Developers mobile app
Click to expand...
Click to collapse
I have isolated it .. if I try and call or receive a call, the phone reboots.
I am going to wipe the phone and try again.
edit: ** looks like it might have been an issue with the ex-pro dialer I was using. I didn't load it this time around, use the stock dialer and calls are working fine **
Wow, thanks a lot OP for bringing victara back to life
Sent from my XT1095 using Tapatalk
is this rom a nightly or a stable release??thank you and great job!!!
Mario85mc said:
is this rom a nightly or a stable release??thank you and great job!!!
Click to expand...
Click to collapse
lol why u flash this old version?
because i don't like the new one and feeling better with this. In any case, i prefer stable release instead than nightly.
I can't turn Halo off.
Is this a bug?