Hi,
I’m trying to upgrade my Wind Mobile Optimux 2x from 2.2 to Android 4.2.2 (CyanogenMod Nightlies). The Clockworkmod identifies my phone as LG G2X; I tried to manually select Optimus 2x but flash recovery failed. I kept it as LG G2X but each time that I tried to flash with a P990 ROM (Optimux 2x), it was unsuccessful and I had to factory reset it by pressing Power and volume down key.
This time, I selected P999 ROM (LG G2X) as I read that it’s the same as Optimus 2x for T-Mobile...but now it stuck at the LG logo (with blue/purple background lines) and pressing Power and down key doesn’t work anymore and it stops at logo again instead of resetting.
If I hold the volume down key until second LG screen, it shows: S/W Upgrade Please wait while upgrading... and it stops there forever...
What should I do to resolve the problem? And is there a way to go back to factory setup mode?
Thanks
sal1c said:
Hi,
I’m trying to upgrade my Wind Mobile Optimux 2x from 2.2 to Android 4.2.2 (CyanogenMod Nightlies). The Clockworkmod identifies my phone as LG G2X; I tried to manually select Optimus 2x but flash recovery failed. I kept it as LG G2X but each time that I tried to flash with a P990 ROM (Optimux 2x), it was unsuccessful and I had to factory reset it by pressing Power and volume down key.
This time, I selected P999 ROM (LG G2X) as I read that it’s the same as Optimus 2x for T-Mobile...but now it stuck at the LG logo (with blue/purple background lines) and pressing Power and down key doesn’t work anymore and it stops at logo again instead of resetting.
If I hold the volume down key until second LG screen, it shows: S/W Upgrade Please wait while upgrading... and it stops there forever...
What should I do to resolve the problem? And is there a way to go back to factory setup mode?
Thanks
Click to expand...
Click to collapse
First of all, check the sticker under your battery for whether your phone P990 or not. Please let me know what type of phone do you have P999 or P990
bitdomo said:
First of all, check the sticker under your battery for whether your phone P990 or not. Please let me know what type of phone do you have P999 or P990
Click to expand...
Click to collapse
It's P999. I spend several hours to research about it and tried different applications...One-Click-G2x-recovery-flasher-04-28-12 and CWM_5.0.2.8_P999 cannot flash the device and give the partition download fail error, maybe because I previously used AIO-P990-ToolKit_v5.6 to nvflash it as APX drivers are installed and USB cable is working well. I tried different custom recovery versions using AIO, ICS-cwm-6.0.3.1, ICS-cwm-6.0.2.5 (before knowing that I have to use G2X), ICS-cwm-5.0.2.8e and ICS-cwm-5.0.2.0 but was not able to flash it as it goes back to recovery mode after rebooting, instead of running the new O/S.
sal1c said:
It's P999. I spend several hours to research about it and tried different applications...One-Click-G2x-recovery-flasher-04-28-12 and CWM_5.0.2.8_P999 cannot flash the device and give the partition download fail error, maybe because I previously used AIO-P990-ToolKit_v5.6 to nvflash it as APX drivers are installed and USB cable is working well. I tried different custom recovery versions using AIO, ICS-cwm-6.0.3.1, ICS-cwm-6.0.2.5 (before knowing that I have to use G2X), ICS-cwm-5.0.2.8e and ICS-cwm-5.0.2.0 but was not able to flash it as it goes back to recovery mode after rebooting, instead of running the new O/S.
Click to expand...
Click to collapse
I can do for you a nvflash for your p999. It will recreat all partitions and etc and will flash cwm p999 recovery to your device. Search custom roms on the optimus g2x forums. It will take some time since i have to download a stock p999 rom and gather the necessary files
Download my attachment and run flash.bat. It repartitionate your phone to p999 layout and flash cwm as well. Do not flash p990 custom roms with cwm to your phone, because p990 and p999 partition layout is different.
bitdomo said:
I can do for you a nvflash for your p999. It will recreat all partitions and etc and will flash cwm p999 recovery to your device. Search custom roms on the optimus g2x forums. It will take some time since i have to download a stock p999 rom and gather the necessary files
Download my attachment and run flash.bat. It repartitionate your phone to p999 layout and flash cwm as well. Do not flash p990 custom roms with cwm to your phone, because p990 and p999 partition layout is different.
Click to expand...
Click to collapse
Thank you for your reply. I finally could flash it using G2XCleanUpBatch5028. It turned out that CM7 unlike what I thought is 2.3.7 not 4.x and I already found some problems in it...I'm trying to find the original Wind Mobile ROM and a way to install it back on my phone to keep it as my factory reset backup to return back to it in case that I could not find a reliable custom ROM.
By the way, I'm wondering what's the difference between your attachment and the one (G2X_V21E_00_NVFlash) that comes with 450MB ext3_system.img file?
sal1c said:
Thank you for your reply. I finally could flash it using G2XCleanUpBatch5028. It turned out that CM7 unlike what I thought is 2.3.7 not 4.x and I already found some problems in it...I'm trying to find the original Wind Mobile ROM and a way to install it back on my phone to keep it as my factory reset backup to return back to it in case that I could not find a reliable custom ROM.
By the way, I'm wondering what's the difference between your attachment and the one (G2X_V21E_00_NVFlash) that comes with 450MB ext3_system.img file?
Click to expand...
Click to collapse
My version of nvflash I skipped the system image, because I assumed that you are going to flash a custom rom. So that 445 mb differnce is teh missing android OS.
You can find your original rom at http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=0000000000000000 , replace the zeroes with your IMEI number. It will give you the download link for your current stock rom. It is in kdz format. If you having troubles flashing kdz, then give me the link to your kdz and I am going to make you a nvflash rom from that.
Related
Hi,
I have a problem with my phone, Original LG Optimus 2x SU660, and I have flashed it with an ROM, using nvflasher, but i was not informed that it is for P990. Now the screen become not touchable and the menu keys are not working.
What I am wondering if there is nvflasher bundle with a ROm that is using the Original ROM for LG Optimus 2x SU660. So I can flash the phone in recovery mode, (Pressing simultaneously the up and down volume button), and get back to the original ROM which has a TV and Radio Application.
Thanks in advance.
-Thomie
Try this: http://forum.xda-developers.com/showthread.php?t=969057
Here's a guide for using the KDZ flasher: http://forum.xda-developers.com/showthread.php?t=1060121
Rusty! said:
Try this: http://forum.xda-developers.com/showthread.php?t=969057
Here's a guide for using the KDZ flasher: http://forum.xda-developers.com/showthread.php?t=1060121
Click to expand...
Click to collapse
Thanks. But I have the problem that the screen is not touchable therefore I can't enable the debugging mode.
I think that guide is overstating things, pretty sure when I used a KDZ I just booted into Update Mode (battery out, hold vol- and plug in USB) and went for it.
You could also use smartflash instead. Here are a few roms. http://forum.xda-developers.com/showthread.php?t=942830
Probably little easier then kdz. But as Rusty! is saying, enabling usb debugging is really not needed.
Edit: Just had a thought that maybe the P990's smartflash-dll isn't working on the SU660. It should work, just don't update baseband to be sure it doesn't break something (becouse that's where they are the most different) or just use the kdz as Rusty! suggested first.
chinese !!
2mo】2mo定制v2版,韩版su660中文完美ROM发布bbs.gfan.com/viewthread.php?tid=1240979&from=recommend_f
【2mo】2mo.v3_LG_P990/993/su660韩版国际版通刷ROM发布/bbs.gfan.com/viewthread.php?tid=1240979&from=recommend_f
【2mo】2mo.v4_LG_P990/993/su660韩版国际版通刷ROM发布/bbs.gfan.com/viewthread.php?tid=1311628&from=recommend_f
【2mo】超级炸弹,恶魔2MO.V5深秋来临!bbs.gfan.com/android-2669199-1-1.html
【2mo】韩版2x移植使用国行,亚太,欧美ROM关键。/bbs.gfan.com/viewthread.php?tid=1290885&from=recommend_
Hi
I'm helping out a friend, which O2X I have rooted and flashed WIUI on to (I previously owned one myself too)
For some reason the phone started to get hot after a while and used up the battery fast, until one day where he couldn't even turn it on again.
Now, he has been trying to fix it himself with NVflash, but no luck, so now its up to me and you guys.
I have used the smartflash tool and flashed the EURO OPEN stock ROM and everything went succesfull, but when the phone reboots, the LG logo appears, and it bootloops.
I tried both with battery and no battery in, but still no cigar.
Any suggestions what I should try next?
PS: If I try to turn on the phone normally, nothing happens. not even a blink from the screen, but I can get into S/W mode and APX
Try lg update tool, choose recover as option, then choose imei as entrance
SuperSkill said:
Try lg update tool, choose recover as option, then choose imei as entrance
Click to expand...
Click to collapse
EDIT: The software says the update is not compatible (dunno if translation is correct, but you get the point)
Update is aborted :/
No more suggestions on what to do?
Tried:
NVflash
Smartflash (Flashed EURO OPEN rom)
LG Update tool (recover function)
The phone still won't boot.
Smartflash is the only solution like you said that the phone can boot in s/w mode try to dig some answer in smartflash thread or search in google i know you can find some answer there
Sent from my Optimus 2X using xda premium
Assuming you have carried out the procedures correctly, looks like this device is actually defective. Probably not what you want to hear, I know, but...
Before giving up completely, you can NVFlash it again (using the original 10C NVFlash from Modaco) and post the log here. Wouldn't get my hopes up though.
Hi,
I tried upgrading my LG-P999 from Android 2.2.2 to Jelly Bean by installing cm-9.9.9-JB-p999-2.zip on the internal storage and then running that file from there, the phone rebooted and is stuck on LG logo screen now.
Can someone please advise how to fix this problem?
Thank you.
LG-P999
rabbagon said:
Hi,
I tried upgrading my LG-P999 from Android 2.2.2 to Jelly Bean by installing cm-9.9.9-JB-p999-2.zip on the internal storage and then running that file from there, the phone rebooted and is stuck on LG logo screen now.
Can someone please advise how to fix this problem?
Thank you.
Click to expand...
Click to collapse
Can someone please guide me how I can flash ROM from computer as the phone doesn't respond to any key except when I restart it by holding the volume down and power buttons, it reboots and gets stuck at LG screen again. When I plug in the USB cable, the computer detects a device but doesn't show anything under My Computer. Please help !!!
Search for this:
[NOV16][STOCK ICS][NEW BL][NEW LAYOUT][CLEAN][CWM 6][ROOT][FACELOCK][UNBRICK] in P990 Android Development,in this post find:
Installation NVFlash version (under Windows): follow that instructions for your p999 custom Rom,but you must have NVFlash version of the Rom,if you dont have it,you must find it just to unbrick your phone,follow the instructions for the NVFlash version,Install this Rom,then install ROM Manager and Flash Clockwork Recovery,the easiest way of installing custom roms to use it,just put custom rom on your SD card,turn off your phone and turn on your phone on the way of holding the VOL + and Power button together,then follow instructions for your custom Rom(Wipe Data/Factory Reset,Wipe Dalvik Cache,Wipe Cache Partition ...) next step go to the "install zip from SD card",find your rom and flash it...
Thank you very much for your response.
Does every phone has it's own specific NVFlash and ROM? I have downloaded one from modacoDOTcom/topic/335474-25-mar-nvflash-stock-rom-release-v10b-dated-1300166062-15032011/ .... 2x-nvflashdrivers.zip and 2x-v10b-1300166062-nvflash.zip .... do you think it will work with p999 as well ?
Turky Party said:
Search for this:
[NOV16][STOCK ICS][NEW BL][NEW LAYOUT][CLEAN][CWM 6][ROOT][FACELOCK][UNBRICK] in P990 Android Development,in this post find:
Installation NVFlash version (under Windows): follow that instructions for your p999 custom Rom,but you must have NVFlash version of the Rom,if you dont have it,you must find it just to unbrick your phone,follow the instructions for the NVFlash version,Install this Rom,then install ROM Manager and Flash Clockwork Recovery,the easiest way of installing custom roms to use it,just put custom rom on your SD card,turn off your phone and turn on your phone on the way of holding the VOL + and Power button together,then follow instructions for your custom Rom(Wipe Data/Factory Reset,Wipe Dalvik Cache,Wipe Cache Partition ...) next step go to the "install zip from SD card",find your rom and flash it...
Click to expand...
Click to collapse
You do realize this is the P990 forum, right? The suggested solution posted above is for P990 devices. You need to check the G2X (P999) forums instead.
DrummerMuppet said:
You do realize this is the P990 forum, right? The suggested solution posted above is for P990 devices. You need to check the G2X (P999) forums instead.
Click to expand...
Click to collapse
Guys, thank you very much for your help. I flashed my phone and it is working now in a sense that its no longer freezing at LG logo. I can see the menu, wifi is working great however its not connecting to wireless network. I believe its due to the fact as DummerMuppet mentioned that I flashed it with 990 and have to look for 999.
I truly appreciate your help and support at least my phone is alive now.
rabbagon said:
Guys, thank you very much for your help. I flashed my phone and it is working now in a sense that its no longer freezing at LG logo. I can see the menu, wifi is working great however its not connecting to wireless network. I believe its due to the fact as DummerMuppet mentioned that I flashed it with 990 and have to look for 999.
I truly appreciate your help and support at least my phone is alive now.
Click to expand...
Click to collapse
That's correct. Even when they're practically identical in most stuff, the P990 and P999 are not the same device (eg. partitions are slightly different, if I remember correctly). P990 ROMs won't work on P999, and viceversa.
Hello friends
i need help after i try to install custom rom using rom manager my Lg optimus 2x went into boot loop, i tried factory hard reset(Vol down+power), pc doesn't detect my phone when i connect(3 diff computers). if i remove battery and press vol down switch and connect phone to computer it show "s/w upgrade screen". phone get charge when connected to computer.
please help, if anybody tell me how i can make my phone get recognized by computer.
thanks
Your user name suggest me that you have a LG P999 which is LG optimus G2X. So, before you do anything can you check the sticker under your battery what does it say? If it says that LG-P990, then download the drivers from here and install, then try to flash a rom again with smartflash. If the sticker says LG-P999 then go to this forum.
bitdomo said:
Your user name suggest me that you have a LG P999 which is LG optimus G2X. So, before you do anything can you check the sticker under your battery what does it say? If it says that LG-P990, then download the drivers from here and install, then try to flash a rom again with smartflash. If the sticker says LG-P999 then go to this forum.
Click to expand...
Click to collapse
Thanks for reply, but luckily i managed to get driver installed on WIn 7 and used Nvflash and ClockworkMod Recovery to install Jellybean. happy that phone is running, but i am disappointed with signal quality and battery life. i am not buying any lg phone for sure.
hi, iv rooted my lg optimus 4x HD device,
i have eur 4.1.2 v20a stock rom.
after that iv installed cwm by the instructions in this link:
http://forum.xda-developers.com/showthread.php?t=1826378
when device reboot, it gets stuck on the lg logo screen and wont resume.
iv tried:
1. reboot
2.all types of wipe the device is not recognized by my computer, and pressing vol(-),
doesn't offer me the possibility to update software.
is there a way out of this??
I take a quick look at instructions and they are for ICS. You did it wrong.
LGaljo said:
I take a quick look at instructions and they are for ICS. You did it wrong.
Click to expand...
Click to collapse
is there a way to revert back..
cause for now i cant start my device,
and it is not recognized in my computer so i cant do anything.
You couldn't go to S/W mode? Charge to full, battery out and in and then volume - and powerbutton? There my knowledge ends, sorry Next time read instruction.
itamarf said:
hi, iv rooted my lg optimus 4x HD device,
i have eur 4.1.2 v20a stock rom.
after that iv installed cwm by the instructions in this link:
http://forum.xda-developers.com/showthread.php?t=1826378
when device reboot, it gets stuck on the lg logo screen and wont resume.
iv tried:
1. reboot
2.all types of wipe the device is not recognized by my computer, and pressing vol(-),
doesn't offer me the possibility to update software.
is there a way out of this??
Click to expand...
Click to collapse
Did you try to hold the - key down while plugging in a usb? (pull out your battery) if that succeeds then you should use kdz flash tool to revert and AIO Tool by OS_Hacking to get a proper recovery.