Hi, i've got to the point that i need to click "install" and choose "CWM-SuperSU-v1.30" but my touch screen stop from working if i connected the usb to the phone it will charge it or if i press the lock button for a few seconds the light will blink.
when i tried to "swipe to unlock" the arrow didn't move.
pleas pleas help me, what should i do?
ilanxxxx1 said:
Hi, i've got to the point that i need to click "install" and choose "CWM-SuperSU-v1.30" but my touch screen stop from working if i connected the usb to the phone it will charge it or if i press the lock button for a few seconds the light will blink.
when i tried to "swipe to unlock" the arrow didn't move.
pleas pleas help me, what should i do?
Click to expand...
Click to collapse
Search for the latest version of CWM for touch support or you can navigate using vol up and down and select with power button.
Also for info the latest SuperSU for the One is 1.51
Related
Hi! Im trying to fix a LG Optimus 2x because it won't boot Im trying to reset the factory settings, but when I enter the Recovery Menu on the phone (it actually does this itself when I try to boot it up normally) the only thing I can do is move the "select thingy" up and down with the volume buttons, but I cant select anything there I tried the Power button, but nothing :O I have tried holding it in, but nothing happends. I have also tried all the other buttons, but the only one that does something is the Home Button ( Shows/Hides the menu).
Please help me
the power button should work fine as the select button, but did you try touching the menu?
some more recent recovery versions support using the touchscreen.
if that doesnt work id say just reinstall cwm with nvflash
Hi
We need to know the version you use of CMW to help you. if you have the 5 probably touch
Have you tried re-installing from ROM manager.
Press either home button or menu button repeatedly until the log says "Back menu button enabled"
Hi guys,
I have just unlocked the bootloader on the rom and installed TWRP Recovery, Went into the recovery and the touch screen wont work it just comes up with swipe to unlock but nothing happens nothing moves. So i thought i would try and turn it off and try again so i press and hold the power button at the top and the to white buttons at the bottom just flash and the device does not turn off.
Really hope you guys can help me as i will need to use my phone tomorrow and it has a full charge of battery.
XSuperDan said:
Hi guys,
I have just unlocked the bootloader on the rom and installed TWRP Recovery, Went into the recovery and the touch screen wont work it just comes up with swipe to unlock but nothing happens nothing moves. So i thought i would try and turn it off and try again so i press and hold the power button at the top and the to white buttons at the bottom just flash and the device does not turn off.
Really hope you guys can help me as i will need to use my phone tomorrow and it has a full charge of battery.
Click to expand...
Click to collapse
You need to hold the Power button for an extended time even after the buttons flash.
What TWRP version did you flash?
What version of the OS do you have?
holding power and volume down will reboot to the bootloader.
XSuperDan said:
Hi guys,
I have just unlocked the bootloader on the rom and installed TWRP Recovery, Went into the recovery and the touch screen wont work it just comes up with swipe to unlock but nothing happens nothing moves. So i thought i would try and turn it off and try again so i press and hold the power button at the top and the to white buttons at the bottom just flash and the device does not turn off.
Really hope you guys can help me as i will need to use my phone tomorrow and it has a full charge of battery.
Click to expand...
Click to collapse
You can also try connecting your usb cable and send the command
Code:
adb reboot-bootloader
:good:
I'm trying to remotely help a friend with a Nexus 6 stuck in a bootloop. The phone is new, just out of the box. He accepted an OTA update before doing anything else, so no USB debugging (or anything else) was set. Now it's stuck in a bootloop.
Is there a step by step guide available to allow flashing a factory image in this situation. Everything I find so far requires USB debugging to be set first. Or, are we talking brick? Returning the phone would be very difficult.
Bob Coxner said:
I'm trying to remotely help a friend with a Nexus 6 stuck in a bootloop. The phone is new, just out of the box. He accepted an OTA update before doing anything else, so no USB debugging (or anything else) was set. Now it's stuck in a bootloop.
Is there a step by step guide available to allow flashing a factory image in this situation. Everything I find so far requires USB debugging to be set first. Or, are we talking brick? Returning the phone would be very difficult.
Click to expand...
Click to collapse
If I were your friend I would put the phone back in the box take it back to the store and demand a brand new one immediately that shouldn't be happening on the stock device
toknitup420 said:
If I were your friend I would put the phone back in the box take it back to the store and demand a brand new one immediately that shouldn't be happening on the stock device
Click to expand...
Click to collapse
Unfortunately, he bought in the US and is now far outside the US. That's why returning would be difficult.
Dam. Can he boot to the bootloader.
toknitup420 said:
Dam. Can he boot to the bootloader.
Click to expand...
Click to collapse
He can do each of these steps but when it reboots after #6 it goes back to the dead robot and "no command"
1. With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on. You will see the word "Start" with an arrow around it.
2. Press the Volume Down button twice to highlight "Recovery mode"
3. Press the Power button to restart into Recovery mode. You'll see an image of an Android robot with a red exclamation mark and the words "No command."
4. While holding down the Power button, press the Volume Up button.
5. Use the volume buttons to scroll to "wipe data/factory reset" and press the Power button to select it.
6. Scroll down to "Yes - erase all user data" and press the Power button to select it.
Bob Coxner said:
He can do each of these steps but when it reboots after #6 it goes back to the dead robot and "no command"
1. With the phone powered off, press and hold the Volume Down button and the Power button at the same time until the device turns on. You will see the word "Start" with an arrow around it.
2. Press the Volume Down button twice to highlight "Recovery mode"
3. Press the Power button to restart into Recovery mode. You'll see an image of an Android robot with a red exclamation mark and the words "No command."
4. While holding down the Power button, press the Volume Up button.
5. Use the volume buttons to scroll to "wipe data/factory reset" and press the Power button to select it.
6. Scroll down to "Yes - erase all user data" and press the Power button to select it.
Click to expand...
Click to collapse
On the "no command" screen, hold power, push volume up and reenter recovery. Select reboot system. See if the phone boots up.
Evolution_Freak said:
On the "no command" screen, hold power, push volume up and reenter recovery. Select reboot system. See if the phone boots up.
Click to expand...
Click to collapse
Same result "no command"
Bob Coxner said:
Same result "no command"
Click to expand...
Click to collapse
At this point, you must connect to a PC and see if you can get fastboot to recognize the device. Then we can proceed.
Will the Nexus Root Toolkit http://www.wugfresh.com/nrt/ work even though USB debug has not been turned on?
Bob Coxner said:
Will the Nexus Root Toolkit http://www.wugfresh.com/nrt/ work even though USB debug has not been turned on?
Click to expand...
Click to collapse
USB debugging does not have anything to do with being in fastboot or recovery. As long as the proper drivers are installed, your computer can recognize it and you can use fastboot in bootloader.
so , i was trying to root my device
when i was in twrp ( last version ) , trying to install supersu . and the "Swipe to unlock" message appear
but i can't swipe
tried to turn off the device , but it won't turned off
after a minutes , the screen turned off
so i tried to press the power again , still in that screen and message and i can't swipe
if i plug it PC , it recharge
i heard if i press and hold the power button under strong light it will recognize or something , not sure if that a joke
aos10 said:
so , i was trying to root my device
when i was in twrp ( last version ) , trying to install supersu . and the "Swipe to unlock" message appear
but i can't swipe
tried to turn off the device , but it won't turned off
after a minutes , the screen turned off
so i tried to press the power again , still in that screen and message and i can't swipe
if i plug it PC , it recharge
i heard if i press and hold the power button under strong light it will recognize or something , not sure if that a joke
Click to expand...
Click to collapse
mate this is m7 thread not m9..
Answer to your problem is try reflashing full RUU or latest firware only & latest twrp http://twrp.me/Devices/
aos10 said:
so , i was trying to root my device
when i was in twrp ( last version ) , trying to install supersu . and the "Swipe to unlock" message appear
but i can't swipe
tried to turn off the device , but it won't turned off
after a minutes , the screen turned off
so i tried to press the power again , still in that screen and message and i can't swipe
if i plug it PC , it recharge
i heard if i press and hold the power button under strong light it will recognize or something , not sure if that a joke
Click to expand...
Click to collapse
Turn off screen timeout in twrp settings.
Sent from my kangaroo powered Inverted ViperONE using Tapatalk 2
I charged my htc one mini 2 (m8 mini) at night and in the mornig It wasn't work. My device is not rooted or not s-off, so it is factory stock. Pressing power button is not working, when i choose recovery on hboot menu, device restarts and stucks black screen and shows me red interjection mark screen, then i press volume up+power button, it says "device CW install: can not found Data". If I choose factory reset on hboot, it is being the same thing ( restarts and stucks black screen and shows me red interjection mark screen, then i press volume up+power button, it says "device CW install: can not found Data"). I don't know what to do please help Thanks a lot.
it is urgend guys help pleasee !!
blu3sm4n said:
it is urgend guys help pleasee !!
Click to expand...
Click to collapse
you not the first one this happens too. you phone lost all its data.
1- Send to HTC for repair (usually FREE)
2- Fix it yourself using tools provided in this forum.
Could you send me a link or the names of the tools dude ? I tried to install stock rom ruu using cmd command but it didnt work. I download the ruu zip file but i can not open with winrar. it says the file is broken or something.
[removed due insult]
If you don't have any solution shut up !! Is there anybody who can help ??