Database Develop

[Q] LCD its not working!!!

Hello everybody this is my first post and is a problem as always i already search in other posts and i didn't find my problem some similars but not the same i hope you help me guys so my problem is that after trying to flash my T-Mobile tab to gingerbread stock rom 2.3.3 odin gave me an error instead of the pass in green
1) the screen didnt respond anymore - so my instinct is to forcely reboot by pressing power+volume.
and so it was successfully rebooted but still no function from the LCD and menu buttons but the power and volume is working so
2) I've tried to run a force reboot again but same scenario happens the menu buttons lightup and i can hear the samsung song when its booting and even i can hear the volumen buttons when i turn it up or down but my screen is black
3) After giving my TAB a good rest chargin it all night i press the power button to check the screen but the screen is not showing anymore only a black screen
4) Instinctively i've try to repeat the process from STEP 1 -2 until i've decided to quickly restore and factory settings because it might be cause of a software conflict but nothing
So it on but the screen its off when i plugg it to the pc with W7 odin recognize the tablet and i can flash it, so i flash it to to 2.2 froyo and it finish succesfully and even reboot the device and i can hear the samsun logo again buuuuuuut!! the screen is still black whitout any sign of light in it but the button are lighted up and the volume works
Conclusion:
I've suspecting the power button is damaged, LCD has been damaged, virus thru the OS(FROYO 2.2).
I still dont understand what happen to it, i dont know if i can take it to samsung because im not from the US im from mexico and i bought the tab in El Paso Tx, i hope you help me guys. Thank You

Is a latin america tab (P1000N/L)?
check your model and use the correct firmware.

Model: SGH-T849 is from T-Mobile

Use odin to flash this rom: http://www.multiupload.com/NKB3NWGHFA.
Is the stock Gingerbread.

Tnx!! downloading....i hope it works

thanks a lot buddy it works my tab is working perfectly thanks a lot now i must find a why to root it tnx really!!

Great! remember to flash the correct modem for call
heres the T-mobile modem: http://www.multiupload.com/0K7XSXOPBQ

please help me rafaeker19 i have same problem my model is latin america tab (P1000N/L)

what ROM did you flash? 2.2 or 2.3 or 4.0, that is Froyo, GB or ICS.
You are likely using P1000 kernel which has wrong digitizer driver for the L/N series.
If GB or ICS, go to
http://www.humberos.com.br/p/kernel-p1000l-p1000n.html
and download the correct format.

[Q] Boot loop after smart flash lg p970

hello every one
i was using cici ros mookes port and it was running well
suddenly after using it for 24 hours the touch failed to work and i was unable to unloack the phone by swipe down the lock on touch screen
then i flased patched poland by smart flash tool it flashed ok but after success ful flash it shows the cwm touch which i have installed but i was unable to operate it by touch
if i tried to select the items by volume up down menu it returens to reboot the phone selections
i reboot the phone but now its boot loop after lg logo and some animation of lg logo.
i tried to recover the phone thorugh b2 c application it also successfully flashed the v20 o version but boot loop
please help me
i have searched xda and tried 3 diff patched ap cp bin files and not got success pl answer thanks to all for reading this question waiting for some reply from the xda members and cici rom author pl if he reads this .

flash again via smartflash, you've messed up with the wiping step.

maybe some wrong step in using the smartflash tool.. use the "rom copy" option, choose ap, cp, then start.. just that.. so far, that tool always unbrick my phone from any condition..

Screen may be broken
try again by smartflash but only checked rom from provider and when will be bad you have to go lg service

Thanks all iki duke supi
it was hardware fault the touch plate panel was not working got it working in 2 days from LG service center.
So the actually problem was solved
Than I again root with smart flash and when rebooted in cwm just mounted SD card copied Zeus on it and installed Zeus 5. 35 thanks all of you and Zeus creator
At present all working fine
Fast stable ok thanks again all.
Sent from my LG-P970 using XDA

unable to software update

hello guys m new here I hope m doing things right
so my problem is that my phone (rooted) stucked at bootloob after pureperformance flashed w/ cwm so the only method to survive was factory reset...and the phone worked normally except I cnt do ota bcoz of device status is custom even ive didn't installed any custom rom (actually ive tride this http://forum.xda-developers.com/showthread.php?t=2030282 with odin before I had rooted my phone but failed to flash and device worked normally, so its nt the problem right?) :/
so after hours in the web ive seen posts sugget using triangle away and it reseted my flash counter only but device status still custom...so searched again for hours and hours and there were posts recommending replace cwm with the stuck recovery, but the problem my s3 mini didn't come with recovery mod !
again with continuous searching ive concluded it maybe a csc/baseband problem?cuz the one I have is very different from stock firmware available on the web (sammobile/Samsung-updates...)
I live in Jordan which has no sale code instead in /system/csc/customer.xml it shows that m on Iraq and my sale code is MID !
m noob in adndroid and I really need ur help guys
here are stuffs maybe usefull for u guys to help me
after dialing *#1234#
version
ap: i8190xxamc1
cp: i8190xxamc1
csc: i8190ojvamc1
and in about device
baseband: i8190xxamc1
kernel version:3.0.31-1039429
[email protected] #2
smp preempt sat mar 9 13:11:21
kst 2013
build number jzo54k,i8190xxamc1

So you are stuck in a bootlop? If so Get Odin and some i8190 stock rom from sammobile install, drivers for your phone so the pc and Odin can detect the phone.
Open Odin,
Your phone must be turned off, now press volumen down button, home button and power button lastly hold these three until it turns on, now reléase the buttons it will boot into download mode
connect the phone Odin will detect it
then select ap
search for the rom you just downloaded unzip it if you didn´t select the tar file and flash it
when it finishes your phone will restart

PLease Help Urgent my only phone doesn't working!!!! May be Soft Brick

PLease Help Urgent my only phone doesnot working!!!!:crying::crying:
Hello Guys, Please help me because my phone is not working and this is the only phone i have so please help me soon.
What Happened:-
I had bought this phone 3 years back in 2012 after 1 month of purchase i updated my phone to official Jelly bean via Samsung kies but my phone had issues like blank screen failing to install official update, So i went to samsung service centre first they refused to service and told me that my motherboard is to be replaced because emmc not working but later they say no need to replace motherboard and installed official update and phone working fine later on i rooted my phone and installed various custom ROMS.
I had been using AICP rom based on kitkat and it is working fine. Some call comes and my phone launcher changed so i goto settings change my launcher but it doesnt change so i rebooted my phone. After that phone booted and AICP bootscreen logo comes after then automatically phone was switched off, Again i switch on the phone but same issue so i go to TWRP recovery and do wipe cache and wipe partition and rebooted my phone but nothing happened galaxy note logo appears and again phone goes switched off.
Problem:-
After that again i went to TWRP Recovery but now failed to go in Recovery mode. Then i go to Odin 3.07 and trying to install official jelly bean via Odin & it displays Pass. Again booted the phone samsung logo comes and then language settings came then after pressing next button phone switch off. After that i tried to install custom ROMS, Clockwork Recovery , Safe Kernels, and official ROMS but situation is same as earlier. Then i install PIT FILE via odin 16 gb pit file with official rom odin shows pass but the situation is same.
Then i go to samsung service centre they go to download mode and where it shows custom binary count:- 1 they told me that you install custom rom i said yes but right now it is on official one ( As i installed Official Firmware via Odin ). They told me that as your phone is old and has no warranty so we try to install our official firmware via odin with all files Like Pit File, Phone, Csc etc. but there is 50 -50 % chance if we fail then you have to replace your motherboard costs around Rs 8500/- or USD $134 which is huge money . Now after installing official firmware with all files got success in odin Phone rebooted with samsung logo and settings come after that phone again switch off means it fails according to samsung service centre.
So after that i become sad but i tried to go to recovery but now good news is yes i get samsung official recovery working perfectly now what to do ? How to check is my emmc corrupted or not ? How to install Lollipop Rom of bauner? How to make my phone working ?
I search xda forum on my issue but not getting exact my situation so Please Help me guys fast .... i think my phone is soft brick not hard bricked.
Thanks in advance for cooperating many needful person and making life easier with sharing of knowledge.:good:

Hi, try going back to official firmware ( i know you already have) , but look for a firmware package with "phone", "pda" and "csc" files to flash, then you're back to square one and can go to a lollipop rom. I had a similar problem and this fixed it

coko___bear said:
Hi, try going back to official firmware ( i know you already have) , but look for a firmware package with "phone", "pda" and "csc" files to flash, then you're back to square one and can go to a lollipop rom. I had a similar problem and this fixed it
Click to expand...
Click to collapse
Which official firmware you are saying and where to find that firmware with phone pda csc files because i searched many official firmware but there download links are dead now. So no option to download. If you have any then please give me link to download and step by step guide or Using Odin just like normally we do .
Thanks buddy for giving your valuable time and suggestion for help.

Does Anybody will help Dr. Ketan, forest 1971
Please Help me guys Dr. Ketan, Forest 1971 plz
Its 4 days and my phone is still not working everything tried but all results FAil:crying::crying:

Black Screen With Light after update TSP FW update *#2663#

hello guys so i wrote the code *#2663# on my samsung galacy M20 and i update TSP FW update than the logo samsung appears and the phone turned off and after this operation my phone won't turn on i've trried all the solution of the internet and nothing happens i tried the hard reset but nothing happend the samsung logo won't appear please help give a solution i want to remove this update but the phone did'nt show on the laptop