hello guys so i wrote the code *#2663# on my samsung galacy M20 and i update TSP FW update than the logo samsung appears and the phone turned off and after this operation my phone won't turn on i've trried all the solution of the internet and nothing happens i tried the hard reset but nothing happend the samsung logo won't appear please help give a solution i want to remove this update but the phone did'nt show on the laptop
Related
Hello, I have this intermittent problem with my galaxy mini s5570... sometimes when I tried to wake up the phone the screen will not wake up... if I go to the android market I can see that the phone is still turned on as it shows the phone as online... however there are no gestures or button combinations that allow me to start using the phone again. I must pull the battery and reboot.
At the moment my phone is rooted however I had this same problem before I rooted it. My friend has an identical galaxy mini that is unrooted and he has the same problem.
Does anyone have any fixes or suggestions to solve this problem?
The next time it happens I will post a alogcat log.
Thanks for any suggestions.
Same firmware problem ?
Try flashing XXPK firmware.
Use Odin n flash a New Firmware,,it would solve ur prob if ur phone do goes to Download Mode..!!
Hello
I have tried to update my Galaxy Mini's firmware using Samsung Kies. Kies just shut down once the progress bar for the download reached 100%, it never installed it. I have tried using the Emergency Recovery Code but the same thing happens. The phone will no longer do anything - turn on or off. It just looks like there is power - the screen appears to be backlit.
Any advice you can offer would be greatly appreciated!
Thanks
Sorry I should have also said it's an S5570!
put your phone into download mode
it may look like phone--!--computer instead of yellow triangle
then just flash a four package firmware with the help of odin multi downloader
My samsung G SPlus I9001 Touch Is not Working in my misstake
I m type Secret Codes *#*#2663#*#* Touch screen firmware version and update
And update TSP FW When Process n Update Long time i Will put out of battery and restart the mobile
and i will see my touch not working i m flash with odin but nothing will do is there any one give me any solution
Hello
I have a mini S3 and went to install CyanogenMod on it but the ODIN stopped in the middle of the installation, causing the Android stay corrupted and whenever I called this message appeared: "firmware upgrade encountered an issue. Please select recovery mode in kies and try again "
So I downloaded the original S3 mini according to my country and everything and I install ROM, well, the installation took place correctly but leave it stuck in boot start screen showing the phone model, then I install the ROM again but the ODIN stopped again and there came the problem ...
it does not turn on the power switch and the only way to 'make it light up the screen' is connecting the USB, but when I plug the cable it gets on and off the screen repeatedly at the "firmware upgrade encountered an issue. Please select recovery mode in kies and try again " until I remove the cable and the phone turns off completely.
I hope you guys understand my problem and can help me please.
Already grateful : )! (sorry my english)
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Can't power on and enter on recovery menu
JanniekM00 said:
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Click to expand...
Click to collapse
I can't do wipe/factory reset in the recovery menu because i can't power on at all. It keeps only blinks (on and off) all the time when its plugged on PC or charger.
Thanks very much for your support!
Did you see the s3 mini logo if you turn on the phone. If you see this works download mode then? if not then your phone is bricked....
When you try and turn the phone on does it display the phone name? Or does nothing happen? If you get nothing then I'm afraid it's bricked. I'd try a different computer, different lead and possibly a different windows os. Then try and flash a stock rom using odin and be 100% sure it's for the model of the phone you have as there's loads of variants of the s3. Other than that, I can't help you any further
Hi everyone,
At first sorry for my english. I`m Dawid from Poland
OK, so i have gt-i8190N and when i trying to turn it on i see only white screen. Screen is ok because i can run phone in download mode.
Of course everyone says " so try to flash rom by odin" but i can`t because in odin i have error "FAIL Get PIT for mapping There is no PIT partition". I was try to flash rom with PIT file (to i8190N and i8190) but without succes.
Are anyone have the same problem?
I was try OneClick also.
Thanks for any answer.
Hello everyone.
I have Note8 Exynos version on DTED firmware.
First time it occure to me, my screen goes black and cannot be turn on. I can receive call and whatsapp, but screen stay off. Nothing can revive it, even restart etc. It ok on Recovery mode and Download mode. So i Odin after wipe to factory also same. Its ok for 2 day.
Today its happen again, but this time screen is flashing, then its ok, then flashing again and boom.. cannot turn on screen anymore. So i odin again and its ok again.
So anyone got this problem on DTED firmware or its just me and maybe my note display or motherboard gone crazy already?
rz_gloveda said:
Hello everyone.
I have Note8 Exynos version on DTED firmware.
First time it occure to me, my screen goes black and cannot be turn on. I can receive call and whatsapp, but screen stay off. Nothing can revive it, even restart etc. It ok on Recovery mode and Download mode. So i Odin after wipe to factory also same. Its ok for 2 day.
Today its happen again, but this time screen is flashing, then its ok, then flashing again and boom.. cannot turn on screen anymore. So i odin again and its ok again.
So anyone got this problem on DTED firmware or its just me and maybe my note display or motherboard gone crazy already?
Click to expand...
Click to collapse
I'm on DTED firmware with XEU CSC with no issues!
If you are on a MULTI-OXM csc try another CSC firmware that OXM supports.
Try flashing DTE6 firmware since it's the same bootloader version "B". ("B"DTE6)
"C"DTF1 firmware is out for the multi-CSC OXM with july patch might give that a try but can't go back to "B"DTED because of the bootloader change (it won't downgrade itself).
edited.....
Thanks for your suggestion, im will try DTF1 if it happen again. ??