Related
hey ya'll, so for the longest time when I would plug the tilt into the wall charger, the screen would NOT turn on (it would not wake up) - however, suddenly, now it does...
I've tried going through all the settings, but I can't seem to figure out how to get it to not wake up when plugged in (wall charger) -- I know it will turn on when plugged into the computer, that's fine -- any help, as always, would be greatly appreciated
thanks!
Well I'm not sure how to stop it from waking when you plug it in, but you can always tell it to go right back into stand-by.
Check out the settings in Start > Settings > System [tab] > Power > Advanced [tab]
You can tell it to "Turn off device if not used for" X amount of time while "On external power".
Not a fix but I hope it helps.
It's a strange thing. I have both a wall charger and a desktop cradle/charger.
When I plug my Tilt into the desktop cradle (without the usb cable connected to the pc), it turns on. But, when I use the wall charger, it doesn't.
This is very consistant. Maybe the pinout is different between the connectors, or the output voltage is different.
It's just something I've gotten used to and can live with.
The Tilt will not wake if you use the wall charger that came with the Tilt. It will wake if you use other types of usb charger
replay37 said:
The Tilt will not wake if you use the wall charger that came with the Tilt. It will wake if you use other types of usb charger
Click to expand...
Click to collapse
I've noticed that myself and I think it is extremely odd but intelligent.
If your cradle is connected to a PC via USB then it will wake. My Tilt never wakes when I simply plug into the charger, but dropping it into my cradle wakes the PPC and the PC (if it happens to be asleep).
It wakes because there is a sync notification that tells it to on detection of a USB ie. repllog.exe is by default set to run when this key is present "AppRunAtRs232Detect"
Now you can remove this repllog entry, but it means you would have to run repllog manually every time you want to sync.
The following was written for the purpose of replacing repllog entries deleted by mistake. However it will give you some info on what happens when you connect certain Rs232 USB connectors.
http://michael-channon.spaces.live....artqs=cat=Repairing+the+ActiveSync+Connection
Mike
I am using the supplied wall charger that came with the phone and the screen powers on when I plug it in. It used to not do this at one point. I believe some thrid party software I installed is causing this. Also the screen with turn on once the charge is complete. Very annoying at night. I don't want to use the on external power settings to blank the screen after x minutes because this messes with using the GPS function while in my car. I want to see the screen while using GPS and plugged into a power source.
dalavar said:
. I don't want to use the on external power settings to blank the screen after x minutes because this messes with using the GPS function while in my car.
Click to expand...
Click to collapse
It shouldn't, all GPS programs I've tried force backlight on regardless on the system settings while they're running. Which one are you using?
I'm using iGuidance 3.1.
I had to do a hard reset due to an app I installed making my phone go all wonky. After the hard reset and re-installing all my programs I no longer have this problem of the phone waking on external power.
My original Tilt used to do the same thing - screen turned on when plugging into the HTC supplied power cord (even after a H/R with no programs). Eventually, the phone had to be replaced after one day it had a red light after charging a few hours and wouldn't turn on (it had been around 50% when plugged in). My refurbished Tilt mostly does not power on when plugged into the wall charger. Once in a blue moon, it will. It is random enough, I haven't been able to see a common factor as to why.
Any settings to disable wake on USB to computer connection?
A lot of times I plug my Kaiser to PC just to charge it, and I hate to see it connecting every time.
Many thanks!!!
Hi there,
I just bought an active car cradle for the Htc HD2 (Carcomm), no problem, working as expected.
Then I began wondering why the phone would not go into car mode when connected to the car cradle... If it's a car cradle, it should put the phone into car mode, right ??
So I was wondering what could possibly trigger the phone into car mode when connected to a charger.
Found this in another thread (http://forum.xda-developers.com/showthread.php?t=767961):
To the person who wanted to know about connecting pins 2&3 to 4 to create a car doc? Looking at the USB spec datasheet It's not that simple. You need to insert a voltage divider across the data lines and tie it back into the 3.2v of the device. A little more trouble than it's worth unless you are doing it for the learning experience.
Click to expand...
Click to collapse
and also from user dabigcheezze :
unfortunately it is a problem with froyo, whenever the phone is placed into dock mode, no matter what the charging input, it will only show up charging in usb mode, i have a homemade dock cable with pin 4 to ground, when i hook that up to my 1 amp charger it only shows usb, using a normal cable it shows ac charging, it has nothing to do with the HTC dock, it will happen whenever the phone is placed into dock mode, it also locks the vol output on the 3.5 jack 3/4 up....sooooo stupid.
Click to expand...
Click to collapse
Does anyone know about grounding pin 4 to enable car mode ? what about power, is the charger powering enough the phone while using BT, GPS and navigation ? Also, the limitations in Froyo are they gone in Gingerbread or could it be fixed ?
Thank you for sharing your experience, I would really like to have a car cradle working 100%
Nobody ?
Sent from my HD2 using XDA App
Come on, I'm sure somebody did the modification... or tried to do it
Willing to share ?
Hi !
Just wait I can contact the guy I wish to buy that second hand HD2 first, then find an appropriate car charger craddle, and I'll look for a solution.
Don't know how to automatically enable car mode, but just solder the 2 middle wires in your USB cable together and you'll get 1A instead of 500mA, which charges way faster. Your car charger needs an output of 1A, of course, else it's just gonna remain 500mA.
StephanV said:
Don't know how to automatically enable car mode, but just solder the 2 middle wires in your USB cable together and you'll get 1A instead of 500mA, which charges way faster. Your car charger needs an output of 1A, of course, else it's just gonna remain 500mA.
Click to expand...
Click to collapse
Thanks for your reply. Yes, it's true. I've seen this small hack to enable AC charging for cheap chargers that are charging with USB mode (400mA I think).
My charger was good enough to provide AC charging (1A), which is great, but not enough to enable the car mode...
What I would like to confirm is if grounding pin 4 will really put the phone in car mode when plugged into the car cradle, before doing it myself...
Do not hack the hardware!
Use a software
http://forum.xda-developers.com/showthread.php?p=8178010
Thank you for your response.
But... is it a software for windows only ?
I run Android on my HD2
Unfortunately, the software only runs on Windows Mobile :-(
So you have to try that:
http://translate.google.at/translat....cz/forum/viewtopic.php?f=3&t=73&p=1037#p1037
seen here:
http://www.youtube.com/watch?v=Nx0zPFQtyxs
I personally ordered the original car holder from htc and it is really a very good one!
Excellent !!
I think that if the mentionned modification works with a HD2 AND a Desire HD, the official Htc android software should work also, like the windows software in the video.
Thank you, it's great ! I will post here my results when done
Even easier - try using PhoneWeaver (can't add a link as a noob)
It's basically an app for setting your phone's parameters, based on all sorts of external influences, such as time, date, power source etc.
So, for example, I have the following settings:-
6:15 am - turn phone on, set volume to Normal
8:15am - set volume to low (for when I'm in the office - its a personal mobile)
4:45pm - set volume to Normal
6:45pm, turn wireless on (as I'm at home, and browsing is much faster)
10:00pm - turn phone / wireless off, set volume to low, start SPB Time (my alarm clock)
Additionally, I have the following:-
If external power is detected AND Activesync isn't running (ie it's not connected to a PC) then turn on Bluetooth and increase volume (this is because the only other possibility for this environment is when its in the powered car cradle)
If external power is detected AND Activesync IS running, turn Bluetooth off, but turn wireless on
It's completely brilliant - never fails and I never have to remember to do anything
I have built a Nexus 7 into my car and I have a small issue.
I need a tasker profile:
When I turn the car on, the screen turns on and music plays.
When i turn the car off, the music stops and the screen turns off. (along with other stuff)
I have created a "test" version of all this so when I connect a power cable (i.e when charging) it turns the screen on and plays music.
When I disconnect the USB (i.e. stops charging) the screen goes off, music stops, bluetooth off etc and all this works fine.
However, the USB will always be connected with power coming through so I cannot use this option. I need another way to detect if the car is on and when it turns off so I can run the correct tasks.
One option i thought of is buy a wireless charger and build it into the car. When my phone is placed on the charger, send a text message to the tablet to turn it on, and when i turn the car off the charging will stop, then the phone will send a text to the tablet to turn the screen off etc.
However after purchasing the wireless charger, i realised everytime i get a call or take my phone of the charger for whatever reason, the screen will go off and music will stop, so this isnt an option either.
So the question is, what can i do so tasker can detect that the car is on or off so the nexus can perform the tasks?
Hope that makes sense
idi_idi said:
ISo the question is, what can i do so tasker can detect that the car is on or off so the nexus can perform the tasks?
Click to expand...
Click to collapse
You do realize that you really have two problems, right? The Nexus 7 will not know when the car is started, or stopped. Unless you can disconnect the power, manually etc.. If you can do that, you can send a command in fastboot to force the N7 to power up when power is connected, otherwise you'd have to boot it up manually.
You could unplug the USB charger.. Or have the tablet turn off after N hours of inactivity, although how do you detect "new" activity if there's no change when the car is started.
If your car has bluetooth, you could detect that as the "turn off" task perhaps, but turning on is probably your bigger issue.
Will the wireless charger idea work?
idi_idi said:
Will the wireless charger idea work?
Click to expand...
Click to collapse
No idea what you mean by wireless charger (2012 model has no wireless charging), or how you'd control it with the phone. And unless your tablet is a 3g one, I don't know how you'd directly communicate with it either.
I just put my phone back to stock so I had to uninstall Tasker, however your tablet does not pull power once the car is off correct? I had a power based one as well, I remember testing it with a surge protector. I could leave the USB connected but flip the surge protector on and off (to mimic power to the phone being halted). To my knowledge when the car is off your USB shouldn't be drawing power therefore you could run the profile off that. Export the profile and post here. I'd like to help test it.
Sent from my Nexus 5 using xda app-developers app
elpeterson said:
To my knowledge when the car is off your USB shouldn't be drawing power therefore you could run the profile off that. Export the profile and post here. I'd like to help test it.
Click to expand...
Click to collapse
My last four cars (current and previous of wife and my cars) the lighter plug stays powered when the engine is off.
I think it's getting increasingly common for the plugs to stay powered. So there's no way for the tablet to know the car is off unless the car has bluetooth and you can look for that.
khaytsus said:
My last four cars (current and previous of wife and my cars) the lighter plug stays powered when the engine is off.
I think it's getting increasingly common for the plugs to stay powered. So there's no way for the tablet to know the car is off unless the car has bluetooth and you can look for that.
Click to expand...
Click to collapse
I have actually found the exact opposite to me true. My wife's 2014 Pilot goes off as well as my 2012 Veloster whereas my 2001 Sable and her 2007 Passat left them on. I'm not sure if you can resolve your issue then. I'll keep looking into it. You could trigger it based on speed I think
Sent from my Nexus 5 using xda app-developers app
elpeterson said:
I have actually found the exact opposite to me true. My wife's 2014 Pilot goes off as well as my 2012 Veloster whereas my 2001 Sable and her 2007 Passat left them on. I'm not sure if you can resolve your issue then. I'll keep looking into it. You could trigger it based on speed I think
Click to expand...
Click to collapse
I suppose that could work.. Find out the speed for several periods in a row, if it's zero, assume it's time to shut down. But that'd mean it's playing music etc during that period etc.
IMO bluetooth, or a plug he can turn off, is really the only way if his USB is powered up all of the time.
Also remember, he has no way to know when to power UP either. I still maintain that's the bigger problem, especially if it's a fixed install and he can't poke the power button
At the moment, its connected so when the car turns on, the USB is powered up and when the car turns off, the power in the USB stops. So at the moment, my tasker profile works on "when charging" do Task A, when not charging do Task B. And it all works fine at the moment.
However I am having issues with charging, (The device is not charging fast enough when turned on and the battery drains over a couple of days) so i planned to keep it always charging, so the power in the USB will always be there regardless of if the car is on or off. So i cant use the "when charging" on tasker anymore. So i needed a new way to it to figure out when i got in the car.
Here are my ideas:
1. Have a wireless charger in my car for my phone. (Not the tablet). When i get in the car, i could put my phone on the charger, have the phone send a text to the tablet to turn it on. When i remove the phone from the charger, send a text to the tablet to turn it off. Simples
2. Connect a wifi router in the boot or something and have it start up only when the car starts, and turn off with the car. It doesn't have to be connected to the internet, it just needs to power up. Then i can do a 'When wifi near' on tasker to see if the car is off or on, and turn the screen off accordingly.
3. Connect the tablet to my phones bluetooth. Whenever i get in the car, they will connect and the tablet will power on. when i leave the car, it will power off. (Not the best option since it will stay on even if i am near the car)
4. Similar to option 1, but have a nfc sticker in the car. when i swipe my phone on it, it communicates with the tablet and turns it on, n then off when required. but i dont want to do this since i know i am going to forget to turn it off one day.
I don't really want to do the speed option, since i want it to turn on as soon as i enter the car, not when i start driving, and i want to be able to park up and use it when i need to put an addess in the sat nav etc.
idi_idi said:
However I am having issues with charging, (The device is not charging fast enough when turned on and the battery drains over a couple of days)
Click to expand...
Click to collapse
If your charger isn't charging fast enough, you're using a crappy charger or one that isn't designed for Android. If your car has a built-in USB port, those are usually super slow, maybe 500mA, most less.
Anyway, glad to hear that your power follows the car state, that makes it all simple.
khaytsus said:
If your charger isn't charging fast enough, you're using a crappy charger or one that isn't designed for Android. If your car has a built-in USB port, those are usually super slow, maybe 500mA, most less.
Anyway, glad to hear that your power follows the car state, that makes it all simple.
Click to expand...
Click to collapse
I've tried about 20 different chargers, up to 2.5amps. The problem isnt the charger. The problem is i dont drive the car long enough to give it time to charge. So if i drive the car for about half an hour a day, for the other 23.5 hours, its on standby. so the battery is always going to go less. So thats why I plan to connect the charger directly to the battery so it will always be charging.
idi_idi said:
I've tried about 20 different chargers, up to 2.5amps. The problem isnt the charger. The problem is i dont drive the car long enough to give it time to charge. So if i drive the car for about half an hour a day, for the other 23.5 hours, its on standby. so the battery is always going to go less. So thats why I plan to connect the charger directly to the battery so it will always be charging.
Click to expand...
Click to collapse
Oh, I thought you had the tablet turning off when the car went off. If I were you, I'd set up a profile that turns off the tablet if it hasn't had power in a few hours, pretty simple to do. On Power, set a time var, every so often check that time var to see if it exceeds your threshold, and power down if so.
If you don't have much installed, it should be a fairly quick power-up, especially the plug goes hot when you start the car.
BTW I hope you're considering cold and heat if you're leaving the tablet in the car. Leaving it in the heat all summer will will the battery.
You can use Timur's kernel, it senses power to turn N7 on or deep sleep it.
Also charges N7 while using OTG.
It;s designed for car install.
khaytsus said:
If your charger isn't charging fast enough, you're using a crappy charger or one that isn't designed for Android. If your car has a built-in USB port, those are usually super slow, maybe 500mA, most less.
Anyway, glad to hear that your power follows the car state, that makes it all simple.
Click to expand...
Click to collapse
I agree, you need to get at least a 2A charger for your car. My wife would watch Netflix on long drives and my car USB port or the normal USB charger I got for the cigarette lighter worked until I up'd it to a 2A charger. I can have screen on for hours while streaming video and still fully charge the tablet in a reasonable amount of time.
I have setup my old nexus 5 as my full time AA device in my car. Though no matter what I do I have to unplug and plug it in again for it connect to the car. (golf mk7).
Anyone know why this is or a way around it? I have tasker to kill the app and relaunch it. Though when i do that it loads on the phone and not on the car display... Driving me crazy. No pun intended
Sage said:
I have setup my old nexus 5 as my full time AA device in my car. Though no matter what I do I have to unplug and plug it in again for it connect to the car. (golf mk7).
Anyone know why this is or a way around it? I have tasker to kill the app and relaunch it. Though when i do that it loads on the phone and not on the car display... Driving me crazy. No pun intended
Click to expand...
Click to collapse
I have modify a cable. I added a switch on/off. In off disconnecting +Voltage AND +data. It does the job..
Sent from my Note 8 using XDA Labs
sosimple said:
I have modify a cable. I added a switch on/off. In off disconnecting +Voltage AND +data. It does the job..
Sent from my Note 8 using XDA Labs
Click to expand...
Click to collapse
Nicely done mate!! I was looking for a software solution though ill take a hardware one! Thanks!
Sage said:
Nicely done mate!! I was looking for a software solution though ill take a hardware one! Thanks!
Click to expand...
Click to collapse
For anyone else you can actually get these cables on ebay. They are made for Raspberry Pis..
Actually the cable i have made is more complicated. I have an old phone always in car, always connected to car system for android auto.
In switch on, i have android auto enabled. In switch off, Android auto disconnect AND phone is charging..
Just an idea what is possible to do..
Sent from my Note 8 using XDA Labs
sosimple said:
Actually the cable i have made is more complicated. I have an old phone always in car, always connected to car system for android auto.
In switch on, i have android auto enabled. In switch off, Android auto disconnect AND phone is charging..
Just an idea what is possible to do..
Sent from my Note 8 using XDA Labs
Click to expand...
Click to collapse
Yup me too old phone that is always in car too. Ill do the same - though ill use Tasker to launch and kill AA when it detects power/no power i can't charge when im not running cause my stupid car's USB port doesn't provide power when the car is off...
Sage said:
Yup me too old phone that is always in car too. Ill do the same - though ill use Tasker to launch and kill AA when it detects power/no power i can't charge when im not running cause my stupid car's USB port doesn't provide power when the car is off...
Click to expand...
Click to collapse
Also my car usb doesn't charge when car is off (after a couple of minutes).
But it charge when i drive and don't use android auto (as the switch in off, charge tge phone). So phone is always charged.
I also use tasker. But not to kill android auto. Android auto is automatically run in switch on. In switch off automatically killed without tasker.
But i use tasker to save battery. When i drive (so phone is charging), tasker open wifi, Bluetooth, battery normal mode). When car is of, charging stops so tasker closes bluetooth, wifi, set battery savings mode). This way battery discharge very low..
Just to give ideas..
Sent from my Note 8 using XDA Labs
Hi all,
I need a device that plugs into your wall and can connect to by an app on your phone to turn on. Or similar.
So my aim is to be able to turn a specific wall socket or plug on with my phone through an app or something. Also turn it off. I want to plug a lamp that has a USB connection(only way of turning on the lamp).
Kind of like the tesla cars and their app able to turn the heating on etc etc. Or those house thermostats you can control with your phone.
I'm sure there's a smart plug or something? Anyone know?
Thank you
Well I ended up getting this, it's on the way. Hopefully it's sufficient.
https://www.amazon.co.uk/gp/aw/d/B07867NPY7
Doesn't work on android pie, what a joke. Sending it back