Related
This may be a stupid question but please it is legit for me a newbie...
I have flashed to stock italian Gingerbread-no problems so far. I want to replace my region from XEU to XSG which is the Arabic region sales code.
yup this is possible. i did something similar on my tab. flashed stock italian GB posted by chainfire and then replaced all my csc files with those for philippines (XTC, GLB, SMA, XTE).
Kabayan, ok I've read somewhere that you used root explorer to replace the csc folder. Where to get the csc folder that I need is now my problem.....
Would you mind to post a step by step procedure on how to go about replacing the csc sales code?
Can we use csc - arab from froyo to gingerbread?
@bongski55
i used sec_csc.zip from KM3 (froyo) firmware. if you have a copy of your old firmware, it is found in the cache.rfs you could mount it with apps likes ultraiso and then extract sec_csc.zip
@romy4321
you could use csc files from froyo builds.
noxxious said:
yup this is possible. i did something similar on my tab. flashed stock italian GB posted by chainfire and then replaced all my csc files with those for philippines (XTC, GLB, SMA, XTE).
Click to expand...
Click to collapse
sir, where can i get those CSC files? can you lead me to the right thread for this? salamat
dudung_ambot said:
sir, where can i get those CSC files? can you lead me to the right thread for this? salamat
Click to expand...
Click to collapse
get csc_sec.zip here
http://forum.xda-developers.com/showpost.php?p=13931129&postcount=47
clearer instructions by vince_junior
http://forum.xda-developers.com/showpost.php?p=13936982&postcount=6
attached csc folder for arab region
http://www.4shared.com/folder/yHALatWU/_online.html
extract copy this csc to my sd card, delete the existing csc folder on system/ and then move from sd card paste to system/ using root explorer
i used this on my tab with gingerbread europe version
hope it will help
it didn't work with me after deleting the CSC from system then move the arabic CSC , reboot my tab then they system hang , so i had to do full re-install !!!!!!!!!!!!
sec_csc file. flashable via cwm.
its for the overcome gingerbread or for the stock rom ?
k0sh said:
its for the overcome gingerbread or for the stock rom ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=14459996&postcount=10
i think it would work for both.
to be clearly , this is will make the tab totally support the arabic language or only for the modem 3g etc ?
EDIT : i just flashed it , and actually no affect at all , talking about if u want to change the locale to arabic or even if you wanna browse in arabic is not supported .. actually the CSC i know is for modem .
ok here is how you do it after u flash the zip . *#272*MIEI# and choosed EGY and press install ( this will wipe all your data ) . then your tab will reboot , but still doesn't support arabic in locale or even in browser .. so what is the use of it ?
just the 3G/Market issues...
noxxious said:
just the 3G/Market issues...
Click to expand...
Click to collapse
i thought it will also affect on the locale , nvw thanks , am feeling good with overcome gingerbread because in their rom they don't include the modem , so 3g will work even if you are in the moon .. tnx
k0sh said:
i thought it will also affect on the locale , nvw thanks , am feeling good with overcome gingerbread because in their rom they don't include the modem , so 3g will work even if you are in the moon .. tnx
Click to expand...
Click to collapse
then i guess it's for those who just flashed stock italian GB.
CSC files contain settings for region/carrier for 3G and not really for modem.
So anyone succeed to get Arabic working ?
Or is there any 2.3.3. Rom supporting Arabic ?
Thanks.
manadus said:
So anyone succeed to get Arabic working ?
Or is there any 2.3.3. Rom supporting Arabic ?
Thanks.
Click to expand...
Click to collapse
There is still no official Arabic gingerbread release by samsung so there is only temporary patch to partially enable Arabic on Overcome Gold. Go to "the overcome experience" website to download the patch.
Samsung is quite busy with the upcoming releases of the 10.1 and 8.9 tabs so it will take a while for the updates. Even the Italian gingerbread had become unofficial now that it has been pulled out.
If I were you you can write a letter to samsung to pressure them to release an arabic gb..
As I don't like to come back to Froyo, I'll try Overcome Gold Rom and try the arabic patch.
Sent from my GT-P1000 using XDA App
for almost two weeks on playing/expirementing on my tab with gb -overcome, i used csc for arabic region, extracted from froyo
Uploaded with ImageShack.us
Dears,
I have flashed a new ROM into my P7300 8.9 tab using Odin 1.85 but yet I still don't understand some of the terms,
- What is the pit file? as I could see it is related to the partition, and when using it we are wiping the whole ROM right? is there versions for such file? what I used is p5, is there a newer one? if so, how to find it?
- What is the CSC and Phone files? when we have to use them or not? and how to find the latest versions?
- How to understand the naming in the ROM file? for example on SamMobile,
P7300XWKL4, P7300XWKK4, P7300UTKH6, P7300BVKJ5, and for the CSC, P7300ATOKI1, P7300OXEKK2...
as well in .md5 files
P7300XWKL4_P7300ATOKI1_P7300XXKJ6_HOME.tar
P7300BVKJ5_P7300FTMKJ5_P7300BVKJ2_HOME.tar
P7300XWKL4_P7300ATOKI1_P7300XXKJ6_HOME.tar.md5
what does these names points for?
thanks,
zeekabal said:
Dears,
I have flashed a new ROM into my P7300 8.9 tab using Odin 1.85 but yet I still don't understand some of the terms,
- What is the pit file? as I could see it is related to the partition, and when using it we are wiping the whole ROM right? is there versions for such file? what I used is p5, is there a newer one? if so, how to find it?
- What is the CSC and Phone files? when we have to use them or not? and how to find the latest versions?
- How to understand the naming in the ROM file? for example on SamMobile,
P7300XWKL4, P7300XWKK4, P7300UTKH6, P7300BVKJ5, and for the CSC, P7300ATOKI1, P7300OXEKK2...
as well in .md5 files
P7300XWKL4_P7300ATOKI1_P7300XXKJ6_HOME.tar
P7300BVKJ5_P7300FTMKJ5_P7300BVKJ2_HOME.tar
P7300XWKL4_P7300ATOKI1_P7300XXKJ6_HOME.tar.md5
what does these names points for?
thanks,
Click to expand...
Click to collapse
No idea about the pit file, i have never used one.
CSC shows what region it's meant for. I don't care about that.
Build number P7300XWKL4 Says:
Product: P7300
Included languages: XW (there is a table posted somewhere on xda about what languages are included with what letters)
Build year and month: K is 2011 and L is December
File name P7300XWKL4_P7300ATOKI1_P7300XXKJ6_HOME.tar
Build number P7300XWKL4 (already explained above)
CSC version P7300ATOKI1 (where ATO is CSC and KI is year and month)
Baseband version P7300XXKJ6 (not sure about the XX, it seems to always be XX for us and KJ is again year and month)
Many many thanks!
What about the number at the end?
Sent from my Nexus One using XDA App
zeekabal said:
Many many thanks!
What about the number at the end?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
It's just a build number in that month.
For example KL4 is fourth build in December 2011.
Million thanks!
Sent from my Nexus One using XDA App
hi guys i am requesting for sumone to upload or give the link where i can download 4 or 5 package for s5830.. i needed the file which 2.3.4 or 2.3.5 MIDDLE EAST FIRMWARE..plz can some give me the link..on sammobile only updated version is seen on their site..thanks
package shud include the following file:
APPBOOT
MODEM
CSC
PDA
mizukage said:
hi guys i am requesting for sumone to upload or give the link where i can download 4 or 5 package for s5830.. i needed the file which 2.3.4 or 2.3.5 MIDDLE EAST FIRMWARE..plz can some give me the link..on sammobile only updated version is seen on their site..thanks
package shud include the following file:
APPBOOT
MODEM
CSC
PDA
Click to expand...
Click to collapse
I remember... KPH is a full package :good:
http://www.sammobile.com/firmwares/1/?model=GT-S5830&pcode=SER#firmware
Viper The Ripper said:
I remember... KPH is a full package :good:
http://www.sammobile.com/firmwares/1/?model=GT-S5830&pcode=SER#firmware
Click to expand...
Click to collapse
i already have the KPH but i am looking for middle east firmware or even asian firmware coz kph does not support 3G here in our country..3G problem, that is why i am looking for full package of the said version.. [2.3.4, 2.3.5]
mizukage said:
i already have the KPH but i am looking for middle east firmware or even asian firmware coz kph does not support 3G here in our country..3G problem, that is why i am looking for full package of the said version.. [2.3.4, 2.3.5]
Click to expand...
Click to collapse
Try to flash a modem of your side, or you can create it
http://forum.xda-developers.com/showthread.php?t=1289830
Creating Modem file
http://forum.xda-developers.com/showpost.php?p=27640614&postcount=102
Viper The Ripper said:
Try to flash a modem of your side, or you can create it
http://forum.xda-developers.com/showthread.php?t=1289830
Creating Modem file
http://forum.xda-developers.com/showpost.php?p=27640614&postcount=102
Click to expand...
Click to collapse
does backup_modem a flashable zip? and by the way after enterting this code *#*#4636#*#* and chose wcdma only the phone lost the ability to receive txt messages, it display like "EMERGENCY CALLS ONLY" but when i tick back to WCDMA preferred carrier name shown..
sorry for posting my tablet question here but my pro-12 forum is DEAD
I have found the file kies downloads to restore my tablet note pro 12.2 att version model sm-p907a
the zip file form kies contains 4 files :
AP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar
BL_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar
CP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar
CSC_ATT_P907AATT1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar
Can i use this files to restore with odin? the firmware version matches my tablet.. in fact its the only firmware available for this device.
torreon901 said:
sorry for posting my tablet question here but my pro-12 forum is DEAD
I have found the file kies downloads to restore my tablet note pro 12.2 att version model sm-p907a
the zip file form kies contains 4 files :
AP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar
BL_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar
CP_P907AUCU1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar
CSC_ATT_P907AATT1AND7_1428272_REV00_user_low_ship_MULTI_CERT.tar
Can i use this files to restore with odin? the firmware version matches my tablet.. in fact its the only firmware available for this device.
Click to expand...
Click to collapse
Those file names appear to be correct odin files for a 907a.
Sorry there really isn't an at&t note pro section for ya. I see you posted in the general pro 12 forum with no response.
440bro said:
Those file names appear to be correct odin files for a 907a.
Sorry there really isn't an at&t note pro section for ya. I see you posted in the general pro 12 forum with no response.
Click to expand...
Click to collapse
Well i used the files with odin and worked !!!!
All this firmwares are from SAMSUNG
only for SM-N910F
I will try keep this Thread updated and give some improvements if possible
You should download Odin 3.09 or Odin 3.10.7 and follow this video if you don't know how to do it
After the process, if you are stuck at boot animation, just go to recovery and clean cache, it should work, if not, do a wipe
If you wanna change CSC for some reason, please follow the Thread made from @TML1504
If you wanna root, check this: ROOT N910F
if you want more things check this: INDEX
----> Mega List - All firmwares in one place <----
You all can use always the thanks button xD
Click to expand...
Click to collapse
EclipseX said:
Last 5.1.1 HTS - Sweden (tre)
Last 5.1.1 HUI - Italy (h3g)
Last 5.1.1 DREE - Austria (3)
Android 5.0.1
Last 5.0.1 XEF - France
Last 5.0.1 TPD - N/A
Android 4.4.4
Last 4.4.4 BTU - United Kingdom
Click to expand...
Click to collapse
When I unzip Last 5.1.1 HTS - Sweden (tre) I'm getting a corupted file error.
thanks for telling me, I will check
@home said:
When I unzip Last 5.1.1 HTS - Sweden (tre) I'm getting a corupted file error.
Click to expand...
Click to collapse
I have a ITV Note 4, is it ok to install the swedish one? I'm reading about touchwiz and meno issues, plus other problems. The topics are very confusionary, can you do me a summary?
@home, I've downloaded and extracted without problems using winrar
If you have an unlocked device, yes u can.
If you have 5.0.1 Yes it is much, but really much better then 5.0.1
I can compare the performance to 4.4.4
Tommolo said:
I have a ITV Note 4, is it ok to install the swedish one? I'm reading about touchwiz and meno issues, plus other problems. The topics are very confusionary, can you do me a summary?
Click to expand...
Click to collapse
EclipseX said:
If you have an unlocked device, yes u can.
If you have 5.0.1 Yes it is much, but really much better then 5.0.1
I can compare the performance to 4.4.4
Click to expand...
Click to collapse
What about touchwiz issues and memo not working?
By installing the swedish firmware, the CSC of my phone will change?
Off course, but you can change again the CSC follow the other thread, or wait for ITV firmware
Tommolo said:
What about touchwiz issues and memo not working?
By installing the swedish firmware, the CSC of my phone will change?
Click to expand...
Click to collapse
EclipseX said:
@home, I've downloaded and extracted without problems using winrar
Click to expand...
Click to collapse
I have tried downloading again & unzipping with Winrar & still get -
C:\Users\mark\Downloads\511_N910FXXU1COH4_N910FHTS1COH3_N910FXXU1COH4_HOME (1).zip: The archive is corrupt
@home, i've done the upload of HUI, try it please
[QUOTE @home;62584713]I have tried downloading again & unzipping with Winrar & still get -
C:\Users\mark\Downloads\511_N910FXXU1COH4_N910FHTS1COH3_N910FXXU1COH4_HOME (1).zip: The archive is corrupt[/QUOTE]
EclipseX said:
@home, i've done the upload of HUI, try it please
[QUOTE @home;62584713]I have tried downloading again & unzipping with Winrar & still get -
C:\Users\mark\Downloads\511_N910FXXU1COH4_N910FHTS1COH3_N910FXXU1COH4_HOME (1).zip: The archive is corrupt
Click to expand...
Click to collapse
[/QUOTE]
Same again.....
C:\Users\mark\Downloads\511_N910FXXU1COH4_N910FHTS1COH3_N910FXXU1COH4_HOME (1).zip: The archive is corrupt
I didn't reupload the FHT yet, please try the DRE or HUI @Home Boonchan
DRE avaliable
I've installed the swedish firmware, it works flawless without a full wipe, I'm impressed! The recents tab works PERFECT with zero lag, like a Nexus device! Action memo is not working (it doesn't recognize the text), but it's not a problem since I don't use it. Looking forward to the ITV version, hoping they don't screw everything up
I'm on a UK unbranded btu firmware on 910f. Which one would be best for me to try?
I'm on 3 network so Italy or Austria maybe.
Thx
Has anyone opened & used these files successfully?
I've now tried all 3 files & everyone give me this error when I open it.......
C:\Users\mark\Downloads\N910FXXU1COH4_N910FDRE1COH3_N910FXXU1COH4_HOME.zip: The archive is corrupt
up
update the post with the new version no brand nation mbm macedonia
Firmware upgrade fails with Odin 3.09
Hi,
I have tried to upgrade the 5.1.1 HTS firmware with Odin . But near the end , I am receiving an error message , in Odin, "Fail. I have tried with the 2 other firmware
but I am always receiving the same error message " fail" .
Any idea please?
Thank you
Daniel
Danielfr said:
Hi,
I have tried to upgrade the 5.1.1 HTS firmware with Odin . But near the end , I am receiving an error message , in Odin, "Fail. I have tried with the 2 other firmware
but I am always receiving the same error message " fail" .
Any idea please?
Thank you
Daniel
Click to expand...
Click to collapse
because they are branded firmware and then three with the pit different, but the version and exit no brand mbm macedonia proof that version
expects the EclipseX loads after this test version