Hello guys, I have a problem with my htc one m7. I installed twrp 2.6.0.0 and when I reboot my phone in recovery mode, touch doesn't work! I can't do anything and I can't turn off my phone because the screen is bloqued and I can't unlock... What I can do? C
Thank you very much!!!
Sorry for my English, i'm from spain
kellkelten said:
Hello guys, I have a problem with my htc one m7. I installed twrp 2.6.0.0 and when I reboot my phone in recovery mode, touch doesn't work! I can't do anything and I can't turn off my phone because the screen is bloqued and I can't unlock... What I can do? C
Thank you very much!!!
Sorry for my English, i'm from spain
Click to expand...
Click to collapse
If you are still on a 4.12 firmware version, you need TWRP 2.5.0.0ml for your phone. TWRP 2.6.0.0/2.6.0.1 requires the updated touch drivers in firmware 2.17 and above. Hope this helps......
kellkelten said:
Hello guys, I have a problem with my htc one m7. I installed twrp 2.6.0.0 and when I reboot my phone in recovery mode, touch doesn't work! I can't do anything and I can't turn off my phone because the screen is bloqued and I can't unlock... What I can do? C
Thank you very much!!!
Sorry for my English, i'm from spain
Click to expand...
Click to collapse
Can you use your volume buttons to navigate in recovery? That would be an alternative if the touch screen isn't working in recovery.
Sent from my ViperOne
You need to update to 2.6.0.1 after you updated your firmware the touchdrivers have changed
dgtiii said:
If you are still on a 4.12 firmware version, you need TWRP 2.5.0.0ml for your phone. TWRP 2.6.0.0/2.6.0.1 requires the updated touch drivers in firmware 2.17 and above. Hope this helps......
Click to expand...
Click to collapse
How I update touch drivers? Goomanager can help? My firmware is modaco switch rom (sense 4.2.2 and google edition 4.3). Thanks!!!
ineedone said:
You need to update to 2.6.0.1 after you updated your firmware the touchdrivers have changed
Click to expand...
Click to collapse
Thanks!! I can't turn off my phone because the screen is locked and I can't swipe to unlock the screen. Hold power button doesn't work When the batery turns off, I can try to update to 2.6.0.1
kellkelten said:
Thanks!! I can't turn off my phone because the screen is locked and I can't swipe to unlock the screen. Hold power button doesn't work When the batery turns off, I can try to update to 2.6.0.1
Click to expand...
Click to collapse
Waiting for the battery will work, but it's a pain. Did you try holding down power and volume down keys at the same time? Takes like 15 seconds, but it should reboot...
dgtiii said:
Waiting for the battery will work, but it's a pain. Did you try holding down power and volume down keys at the same time? Takes like 15 seconds, but it should reboot...
Click to expand...
Click to collapse
Yes... I try it, but doesn't work. I wait for the battery
kellkelten said:
Yes... I try it, but doesn't work. I wait for the battery
Click to expand...
Click to collapse
Hmmm, that is strange kell, but I guess you have to wait then, sorry I couldn't help more
dgtiii said:
Hmmm, that is strange kell, but I guess you have to wait then, sorry I couldn't help more
Click to expand...
Click to collapse
No problem, thanks to you for your help
kellkelten said:
No problem, thanks to you for your help
Click to expand...
Click to collapse
You're welcome, pm me if you need anything else once your phone boots
Keep it under a bright light, then reboot the device with powerbutton and volume down. It Wil work . Or adb fastboot
problem with touch in recovery mode htc one
i have the same problem... what did you do to resolve it? i can't swipe to unlock the screen!
Related
Hello. I installed the TWRP 2.5 to get s-off, and finally got inside it. Now I have a really big problem, as the TWRP doesn't let me click (touch) on the phone. In other words, the touch is not responding. I'm stucked in the lock screen of the TWRP that says "swipe to unlock". It doesn't let me restart the phone... any ideas to solve it? If only the battery was removable...:crying:
thanks.
jcasado94 said:
Hello. I installed the TWRP 2.5 to get s-off, and finally got inside it. Now I have a really big problem, as the TWRP doesn't let me click (touch) on the phone. In other words, the touch is not responding. I'm stucked in the lock screen of the TWRP that says "swipe to unlock". It doesn't let me restart the phone... any ideas to solve it? If only the battery was removable...:crying:
thanks.
Click to expand...
Click to collapse
Go back to fastboot and flash the 2.6.0.1 version that is the latest one and has no issues with the HTC One
http://techerrata.com/browse/twrp2/m7wls
cloppy said:
Go back to fastboot and flash the 2.6.0.1 version that is the latest one and has no issues with the HTC One
http://techerrata.com/browse/twrp2/m7wls
Click to expand...
Click to collapse
thank you, but how can I go back to fastboot? It doesn't let me restart. Should I wait till the battery is over...?
jcasado94 said:
thank you, but how can I go back to fastboot? It doesn't let me restart. Should I wait till the battery is over...?
Click to expand...
Click to collapse
Holding down the power button for about 30 seconds powers off the device. once the device is off you can hold the power button and volume down button to get back to the bootloader
cloppy said:
Holding down the power button for about 30 seconds powers off the device. once the device is off you can hold the power button and volume down button to get back to the bootloader
Click to expand...
Click to collapse
thanks again, but it does not power off... I holded it for about 1 minute haha... Maybe it's because it's in the lock screen of recovery
jcasado94 said:
thanks again, but it does not power off... I holded it for about 1 minute haha... Maybe it's because it's in the lock screen of recovery
Click to expand...
Click to collapse
yea that would happen to me too with 2.6.0.0. hitting the back button will let you unlock but it will then ask to swipe to unlock for anything else. try to start to hold power button at the lock screen hit the back button and unlock and see if it turns off after 30 seconds.
cloppy said:
yea that would happen to me too with 2.6.0.0. hitting the back button will let you unlock but it will then ask to swipe to unlock for anything else. try to start to hold power button at the lock screen hit the back button and unlock and see if it turns off after 30 seconds.
Click to expand...
Click to collapse
back button doesn't let me unlock..
do you think if it goes out of battery, I would be able to charge it and then open bootloader or just normal OS?
jcasado94 said:
back button doesn't let me unlock..
do you think if it goes out of battery, I would be able to charge it and then open bootloader or just normal OS?
Click to expand...
Click to collapse
yea when it runs out of battery and you let it charge a bit you should be able to turn it back on normally (as long as you have a working system) or to bootloader. i would recommend replacing the recovery first though
cloppy said:
yea when it runs out of battery and you let it charge a bit you should be able to turn it back on normally (as long as you have a working system) or to bootloader. i would recommend replacing the recovery first though
Click to expand...
Click to collapse
ok, thanks, that's what I wanted to know. Fortunately, I have a working operating system (as long as I know, because I have not preformed any wipe, just installed recovery...). Hope it works, anyway I'm gonna try adb reboot first..
Thank you.
Hi there need help pls
I have sensation xl with rom sense 5.0, when to recovery and by mystake aplied wipes including dalvik and format system, know i´m stuck on htc Green logo and I can´t access custom recovery to restore
What can I do?
Thanks in advance, sorry for my english
joekool619 said:
Hi there need help pls
I have sensation xl with rom sense 5.0, when to recovery and by mystake aplied wipes including dalvik and format system, know i´m stuck on htc Green logo and I can´t access custom recovery to restore
What can I do?
Thanks in advance, sorry for my english
Click to expand...
Click to collapse
sense 5.0??
To access recovery swith phone off then press volume down button and power button. Hold both buttons until phone will go on.
Thanks
jjaagg said:
sense 5.0??
To access recovery swith phone off then press volume down button and power button. Hold both buttons until phone will go on.
Click to expand...
Click to collapse
It´s been fixed, but I have another problem by the way I have sense 3.6 Software version 2.31.401.2
The problem that I have now is when I turn off the phone and connect the charger immediately turns on and goes to recovery every time.
What can I do?
joekool619 said:
It´s been fixed, but I have another problem by the way I have sense 3.6 Software version 2.31.401.2
The problem that I have now is when I turn off the phone and connect the charger immediately turns on and goes to recovery every time.
What can I do?
Click to expand...
Click to collapse
It is normal behaviour of SXL.
Hello...
I buy a moto g 2014 XT1063 and i follow the tutorial in this xda forum to unlock the bootloader, after that the phone restarts fine and work well. Then i power off the phone and turn on again then the phone dont turn on :S no custom no bott not nothing!!!! i follow this tutorial http://forum.xda-developers.com/moto-g-2014/help/qa-unbrick-hard-bricked-moto-g-2nd-gen-t2972832but dont work for me uu ANY SUGESTIONS?
What have you tried after that?
The battery was ending?
Tried to plug the charger something happens?
....
A fix...
Have you tried holding the power button?
hold it for a minute or two to see if starts...
Nothing. Try again with the charger plugged.
hold the power button forces the phone to reset. Just like in windows when it is stuck. Maybe your phone is just stuck.
Good luck.
baybutcher27 said:
What have you tried after that?
The battery was ending?
Tried to plug the charger something happens?
....
A fix...
Have you tried holding the power button?
hold it for a minute or two to see if starts...
Nothing. Try again with the charger plugged.
hold the power button forces the phone to reset. Just like in windows when it is stuck. Maybe your phone is just stuck.
Good luck.
Click to expand...
Click to collapse
i try everything but cant respond... then i leave the phone unpluged for a night and today i plug in again and bum!!! the phone is awake... Why the phone goes from 80% battery to a 0% :S is a bug or something?
now i have another problem... i do a clean install factory reset from my CWM and try to install the 5.0 flasheable ROM but they stops at the second phase :S
I am not a moderator or someone that is from xda developers, but sounds like you need a newer version of ClockWorkMod (or an other custom recovery for your model)
Older versions of cmw may not support android 5.0
its the peanut said:
I am not a moderator or someone that is from xda developers, but sounds like you need a newer version of ClockWorkMod (or an other custom recovery for your model)
Older versions of cmw may not support android 5.0
Click to expand...
Click to collapse
hows that supposed to help? he can't turn his phone on...
mrtaylor1997 said:
hows that supposed to help? he can't turn his phone on...
Click to expand...
Click to collapse
If you read his second post it wil answer your question.
He says he got another problem flashing a 5.0 custom rom.
its the peanut said:
If you read his second post it wil answer your question.
He says he got another problem flashing a 5.0 custom rom.
Click to expand...
Click to collapse
Oh, I'm sorry
mrtaylor1997 said:
Oh, I'm sorry
Click to expand...
Click to collapse
Dont feel bad my friend, it can happen alot.
Hold power and sound down key for 130 sec. After u see menu click on reboot.
Dear people,
So i tried flashing my android phone with rashr and installing Android 6.0 marshmallow, so when i went into rashr and pressed "reboot into recovery mode on boot"
it keeps booting into recovery mode, although i have a black screen when it's in recovery mode and i can tell that it's on because the phone gets warmer the longer it's on.
I've honestly tried everything on the Internet, i think i even got some viruses on my computer now, is there anything i can do?
Or am i screwed? ;c
Thanks,
Alanaaya
Can you boot into download mode?
justinxfan said:
Can you boot into download mode?
Click to expand...
Click to collapse
No, i can't every time i reboot by removing my battery i get into recovery mode with a black screen
Alanaaya said:
No, i can't every time i reboot by removing my battery i get into recovery mode with a black screen
Click to expand...
Click to collapse
Immediately press home, volume down and power when you put the battery in. Try that.
justinxfan said:
Immediately press home, volume down and power when you put the battery in. Try that.
Click to expand...
Click to collapse
Damn, thank you! Did this just save my ass?
EDIT: What do i do now i'm in the download mode?
Alanaaya said:
Damn, thank you! Did this just save my ass?
Click to expand...
Click to collapse
It booted into download mode?
justinxfan said:
It booted into download mode?
Click to expand...
Click to collapse
Yes it did, for some odd reason - What now?
Alanaaya said:
Yes it did, for some odd reason - What now?
Click to expand...
Click to collapse
Flash stock firmware
justinxfan said:
Flash stock firmware
Click to expand...
Click to collapse
Well, i've been trying to do that but whenever i add the firmware and press start it will just pop-up a box and tell me that odin has stopped working :/
Reboot loop/recovery
Soo, im having the same problem as OP
However, my odin seems to be working fine, and im using the correct firmware.
but... When i do flash it the problem persist nothing changes, so im sorta stuck in a boot loop
anyone that can help ?
Alanaaya said:
Well, i've been trying to do that but whenever i add the firmware and press start it will just pop-up a box and tell me that odin has stopped working :/
Click to expand...
Click to collapse
Use this version of odin
http://www.android.gs/download-odin-3-09/
Also what version of windows are you running?
Hi
Hi all,
I've used this thread to unbrick a Leeco Le 2 (x520).
The flash itself went like a charm, however, after disconnecting the cable and pressing the power button to reboot, the screen remains black.
When I short press the power button I can hear a sound and vibration, but that's it.
I'm stuck, even more so than before.
Is there anyone who can help me with this issue please?
Thanks in advance!
PS: I've also posted this question Thursday in the thread itself.
hello, did you solve the problem? I have the same situation. If you solve the problem, please write to the mail [email protected]
I've also same issue, please tell me if you get rid of this.
Volvo_be said:
Hi
Hi all,
I've used this thread to unbrick a Leeco Le 2 (x520).
The flash itself went like a charm, however, after disconnecting the cable and pressing the power button to reboot, the screen remains black.
When I short press the power button I can hear a sound and vibration, but that's it.
I'm stuck, even more so than before.
Is there anyone who can help me with this issue please?
Thanks in advance!
PS: I've also posted this question Thursday in the thread itself.
Click to expand...
Click to collapse
PandaDex48 said:
hello, did you solve the problem? I have the same situation. If you solve the problem, please write to the mail [email protected]
Click to expand...
Click to collapse
Masood_alam said:
I've also same issue, please tell me if you get rid of this.
Click to expand...
Click to collapse
10. Once completed, disconnect the phone and power it up by long pressing power button.
Click to expand...
Click to collapse
I can't see/read, one of you did a long Power-Button pressing???
JamBax said:
I can't see/read, one of you did a long Power-Button pressing???
Click to expand...
Click to collapse
my leeco le2 is stuck on boot logo. i cant even unlock my bootloader. what to do?
sree94 said:
my leeco le2 is stuck on boot logo. i cant even unlock my bootloader. what to do?
Click to expand...
Click to collapse
Down load this older version of twrp-3.0.2-0-s2.img from https://dl.twrp.me/s2/
do a wipe->data format-> yes
then reboot.
Hi
I have same issue. Its looks like phone is turned on but my screen is black. I cant connect with adb cos i flashed fresh stock rom and with black screen i cant turn on debuging usb or unlock.(i can\t flash twrp so i cant flash new custom rom) Is there a way to flash custom rom with stock flasing tools like flashone or qfil, or is there a way to control my phone from computer without needing android screen(i can\t give any permission to new apps cos it new stock rom and my screen is black )
Solved - No Display after Flash
I know this is a old thread, but still i am posting this because u never know who might need it...
Guys i was having similar issue. After flashing Le2 with QFIL, I was getting no display. However my phone was somewhat on and making bleep sound when power key was pressed. Do this if you have similar problem:
1. Download this firmware:
https://drive.google.com/file/d/136X8jKA5eJRkyQ3Fi2f1r6qNkLXAG8io/view?usp=sharing
2. Flash it with QFIL/Miracle box/UMT whatever u feel like.
3. Hold Vol+ and Power button and goto Recovery. TWRP recovery will boot.
4. Now put any rom (i used latest LOS nightly) in it by using MTP from PC and flash it.
(Optional step: if u want to use official firmware It may happen that u get stuck at LeEco boot screen, only if u get stuck, then flash the kernel inside the zip and it will boot normally.)
5. ENJOY ^_^
If this helped, you know what u have to do :angel: