Database Develop

Galaxy tab 8.9 dead solution

I got galaxy tab 8.9 now it's dead no power on its only detect in USB mode we insert cable screen is blank and when I tried with odin downloader it stucks and didn't do flashing how to over come from this plz help the team .

Have you tried holding the power button for 30 seconds?

i have tried that also not working its detecting in usb comport but blank screen.

what you've done before this happen? are you flashing?

Firstly is the tab dead with no battery left and you haven't charged it from a wall socket first. The sgt does not charge via usb to computer, only from a wall powered charger or a 5v-2amp usb charger socket. First charge the device from the wall then wen theres power let us know if theres still anything you need help with
I know it stupid thst it dosen't charge from the computer, thankyou motleys kernel.....
Sent from my GT-P7300 using Xparent Blue Tapatalk

My Tab is dead
It was working fine but have not used for past 3 months and now not charging. Have tried charging thru USB as well as wall charger but no go. Any solution??

[Q]

Neeeed helppp.guys my device after charging cant power off.everytime finish charging n i power off it will boot again until i take off the battery n put in the battery again.n everytime after charging i plug off the cable bt my device still processing charging eventhougt not charging until pull down the battery power on. Pls anyone facing same issue n succes to solve the issue or any suggestion.any help will be so welcomed.regards.

I have a slightly different problem : when I power off my phone while charging, it reboots automatically. So if I have to switch off while charging,I have to unplug the charger, turn it off and plug it back in.
I'm not sure if it's only my problem.
Any help would be appreciated.

Same but a bit different
harith.unnikrishnan said:
I have a slightly different problem : when I power off my phone while charging, it reboots automatically. So if I have to switch off while charging,I have to unplug the charger, turn it off and plug it back in.
I'm not sure if it's only my problem.
Any help would be appreciated.
My Device : Rooted GT-I9070
ROM - 4.1.2 Stock I9070DDULP8
Kernel - CoCore-E-5.0
Recovery - TWRP
Click to expand...
Click to collapse
hey the same here but its again slightly different,even if i unplug it and power down , then plug the charger into the phone which is now off, it powers on again, BASICALLY "I CANT HAVE THE PHONE POWERED DOWN WHILE CHARGING ",PERIOD.

[Q] Phone Dead...

My battery totally died last night and powered off when it ran out of battery however now I cannot charge the phone at all. It was on charge all night and no charging light comes on. Ive tried with the mains cable, usb cable to pc and in car charger.
Does anyone have any suggestions to get it working again?
Thanks

Did it just randomly die? Is there anything you did beforehand that could influence it, like dropping it (in water)?
I'm not entirely sure what it could be, but if you could provide this info, others mide have an easier time troubleshooting.

dr9722 said:
My battery totally died last night and powered off when it ran out of battery however now I cannot charge the phone at all. It was on charge all night and no charging light comes on. Ive tried with the mains cable, usb cable to pc and in car charger.
Does anyone have any suggestions to get it working again?
Thanks
Click to expand...
Click to collapse
HI
greetings,
connect the phone to charger and press and hold the power button for 30 sec and see if the led is flashing
if not then connect to pc and try to boot into bootloader menu and tell what happens. weather it boots, does it just vibrates or does the led flash

rooted my device and now my phone wont power up?

I had over 80 percent in battery and now my phone wont charge or turn on or even be in fastboot mode... please help

miguel11691 said:
I had over 80 percent in battery and now my phone wont charge or turn on or even be in fastboot mode... please help
Click to expand...
Click to collapse
Did you get this to work?
Based on your post count, this is probably a stupid question but:
You tried charging in an outlet (not through computer), right? Any under-the-hood work makes my Bionic run hot and burn through the battery.
More technical: I read somewhere that someone upgraded to windows 8 and fastboot stopped working. Windows 7 fixed the problem (if you're saying that fastboot is the problem, not Vol - & power button recovery mode).
Were you in the process of rooting?

LJ6782 said:
Did you get this to work?
Based on your post count, this is probably a stupid question but:
You tried charging in an outlet (not through computer), right? Any under-the-hood work makes my Bionic run hot and burn through the battery.
More technical: I read somewhere that someone upgraded to windows 8 and fastboot stopped working. Windows 7 fixed the problem (if you're saying that fastboot is the problem, not Vol - & power button recovery mode).
Were you in the process of rooting?
Click to expand...
Click to collapse
I am kind of having the same problem. I recenty got a droid bionic where I had to replace the LCD screen and battery since when I got it it did not have a battery with it. I got an NON-OEM extended battery and every thing was working fine for three days. In that time I was able to upgrade everyting to the latest software, fireware, and Android version (4.1.2 JB) but after those three days the phoe woould not power on. When I plugged it into my computer and tried, the white power light would just blink at me. when I unplugged it from the computer and tried it would not even come on. I thought it was the battery so I sent it back and got an OEM extended batter and a OEM dock/charger. When I got everything I plugged it all in and the screen came on with the Motorola M logo and then showed me a picture of the battery at 5%, so I let it charger over night. In the morning I pressed the power button while still plugged into the charger, the phone light up saying the battery was at 100%. So I took it off the charger and tried to power up. Nothing happened. I plugged it into my computer and the white power light came on and stayed solid but still no power-up. I just tries the Volume Up/Down power while plugged into the wall charger and I can get to the recovery screen and try the normal boot up, I get the Motorola M Logo screen, I just now tried recovery and the little Droid just showed up with its stomach with a red triangle and an ! in it and is just sittin there. and now it when back to the Motorola M Logo screen then the battery screen. Does this mean mine is bricked as well? Please some one help.

Bumping because of no help yet. I can access the recovery screen but does not seem to help any, it also has to be plugged into the wall charger for this to happen but I can not power it up whether it is plugged in or not. Please Help someone so I can get this figures out.

Alright strange thing to try, plug it into your computer, while plugged in take it the battery, give it a minute and put it back in while still plugged in.
Sent from my XT875 using Tapatalk 2

Did as you suggest but when I took out the battery. the white light stayed on. Still could do nothing. Waited 2 minutes, put the battery back in and still nothing. All I get is the white light staying on. I unplug from the computer, the light turns off and still nothing, not even the recovery screen will boot up.

Can you get to the fast boot option by holding both volume buttons and power
Sent from my XT875 using Tapatalk 2

B.E.McAllister said:
Can you get to the fast boot option by holding both volume buttons and power
Sent from my XT875 using Tapatalk 2
Click to expand...
Click to collapse
As long as I keep it plugged into the wall charger I can. When I go there it says "Battery Low Cannot Program Connect USB Data Cable. But as soon as I unplug the wall charger it shuts off and I can not get back to fast boot. When I plug it into the USB cable and plug into the computer, I can not get to fast boot. I just check and it says my battery is at 100%. but when I first plug it in it says 5%.

Your gonna need to charge your battery with either an external charger or the usb charging hack before you can perform an fxz on it
Sent from my XT875 using Tapatalk 2

[FIX] Revive phone from the drain of death

this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.

Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?

Celestial Fury said:
Interesting. For normal charging, will plugging the Z1 to the USB and magnetic ports simultaneously speed up charging as well?
Click to expand...
Click to collapse
no you can't speed up charging. Charging speed is limited to cable quality, AC plug quality and software/hardware restrictions.
the USB on PC and magnetic cable combo for some reason helps to start the phone like you do when you want to recharge an depleted car battery.
It just open the circuit and let the phone charge again.

someone please confirm if this works for more than one person/situation.
Thanks for assistance btw, hopefully it works for all of us.

Nope doesn't work.
I tried it already.
Sorry guys.

Worked for me. Took some time before PCC registered it though.

help me please
Asadroid said:
this is a problem on Xperia Devices (at least the ones with a sealed battery my x10 never had this).
This drain brick happens because the hell i know, but is phone bricked, dark, no light , no vibration, nada, its was a real brick.
how i fixed it? sort of i fixed my Xperia T had to provoke charging but the Z1 doesnt have a red blinking light after charging it for a while... but it does have a magnetic charging port!.
now to the instructions. following what i did to try and revive my phone.
1. try to charge the phone for an hour or so.
2. most like it wont charge but if you connect it to the PC, it will sort of react to it, just try unplugging and plugging the phone till it reacts, you may even leave it to charge there just in case (for about 10 mins if you want i leaved it for 3).
3. get a 2 AMP charger, the original one or a known brand charger like anker (i did it with my anker charger and it worked).
4. get or Use a magnetic cable/dock and connect it simultaniously with the usb cable on the PC. (and no the magnetic cable wasnt enough to jump charge the phone).
5. if the stimulation worked, it should be able to show a really dim red led, that means your phone is still alive
6.let it charge it will turn on alone.
7. smile and cry out of joy because your 500-700 dollar phone still works.
if it worked or you have any modifications on this method leave a comment and hit the THANKS button.
btw i turned on my phone and it had 1% that means it never charged until i jump charged it.
Click to expand...
Click to collapse
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you

pheel said:
Nope doesn't work.
I tried it already.
Sorry guys.
Click to expand...
Click to collapse
did the computer detected the phone but for a brief moment like trying to install the drivers?
Kirkymole said:
Worked for me. Took some time before PCC registered it though.
Click to expand...
Click to collapse
@Kirkymole;
can you share what you did exactly and what i can up to the guide?
and im glad that i could help you
momo-infos said:
Hello my friend I have Xperia Z1 and I fall into the Hard Brick Pc didn't recognized my phone but I put myself in the wall charger after a few hours LED red blinking you can post a picture for this solution because I did not understand exactly and thank you
Click to expand...
Click to collapse
as i told you on the PM write up how you bricked it exactly and what steps have you done so i can help you correctly.
i will post pictures of the procedure of how i did it when i get a few hours to edit and upload it.

Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.

Video instruksion would be very helpfull maybe

Asadroid said:
did the computer detected the phone but for a brief moment like trying to install the drivers?
Click to expand...
Click to collapse
Yes. But the computer simply recognised it as a normal "unknown" usb device with usb debugging disabled.
--
ruinkhan said:
Tried this trick last night. After 2 hours LED stopped blinking and became stable RED (no flashing). This is the first time in 1 month that LED stopped flashing, I was even able to Hold Power+Volume up button and it vibrated 3 times (nothing like that happened in the past). So it was a significant improvement from where I was 2 days ago. However, LED suddenly turned off and when I connected it to charger again it started to blink again. Buttons do not respond again.
Little info from the past:
I bricked my Z1 when I flashed .290 ROM. Left it on charge for 2 days nothing happened, flashtool would not recognize it and kept saying USB debugging off. Then I decided to open back cover and remove the battery so it could reset. That didnt resolve the issue and i just gave up.
Click to expand...
Click to collapse
Exact same thing happened to me. "USB debugging off"

All I did was plug in the magnetic connector, then with the PC turned on and Pc companion running I plugged in the USB, it took about 20 minutes to recognise it but once it did, I unplugged it, left it on charge via the magnetic plug for around 5 hours and although the charging symbol never appeared it booted into recovery the normal way (I did that just to see what would happen) then restarted the phone via Cwm and it worked normally from then on.

Kirkymole said:
although the charging symbol never appeared it booted into recovery the normal way .
Click to expand...
Click to collapse
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?

ruinkhan said:
BY saying "Charging Symbol never appeared", do you mean LED was not red and turned off?
Click to expand...
Click to collapse
The symbol that appears on the screen.

I also kind of used this method.
I directly plugged in, in these steps.
1) Plug in magnetic charging dock with 1A charger (Plugged USB into charger)
2) Plug in USB with 2.1A charger (Plugged USB into charger)
Dim-ish red light popped up and the phone began booting.
Plugging into the phone for me wasn't as effective as plugging into the charger as I left it for a while and nothing happened but upon plugging USB into my single dual port charger this method worked to get my phone onto the charging screen, Android L
Had to plug the USB in and out a few times, not too many times, but eventually it booted up to the charging screen.
Be patient is the key I suppose?

For me worked with magnetic and usb 1A charger! Thanks!