Hi guys
Is this rom for I9070P?
http://forum.xda-developers.com/showthread.php?t=2197333
He write there that rom is based on CM which should be for my phone...
And when i want install this rom.. Will Kernel install with? (I m using CoCo-re 7.0)
And last... In changelog is Beta 5B Added multi-lang pack.. It means multi-lang is in rom or i have to install it?
Thanks for your Answers (Bad English)
look there: http://forum.xda-developers.com/showpost.php?p=39167329
the cm10 compatibility zip shoud work for miui as the one you mentioned is based on cm10
don't install another kernel, cm10 based roms are told to be not compatible with cocore kernel
adamuadamu said:
look there: http://forum.xda-developers.com/showpost.php?p=39167329
the cm10 compatibility zip shoud work for miui as the one you mentioned is based on cm10
don't install another kernel, cm10 based roms are told to be not compatible with cocore kernel
Click to expand...
Click to collapse
So if i understand correct.. Download Miui zip ang change there META-INF and tee folder from BlibteefolderCM10?
And I m using Coco-re... So Firstly Do i have to install other Kernel or the Kernel is in Miui rom?
Thanks!
Lalson said:
So if i understand correct.. Download Miui zip ang change there META-INF and tee folder from BlibteefolderCM10?
And I m using Coco-re... So Firstly Do i have to install other Kernel or the Kernel is in Miui rom?
Thanks!
Click to expand...
Click to collapse
With CM instalation CM kernel will be installed. So you can install it when you are on CoCore. I suggest you to make nandroid backup of Stock based JB in CWM, that you can easily go back from CM when you want. If not you need to flash stock based kernel, and then ROM, or to flash firmware with Odin.
Послато са GT-I9070 користећи Тапаталк 4
Lalson said:
So if i understand correct.. Download Miui zip ang change there META-INF and tee folder from BlibteefolderCM10?
Thanks!
Click to expand...
Click to collapse
in order to run the rom you don't need to change anything. just flash the MIUI zip, don't leave the recovery and flash libteefolderCM10, then reboot
shut_down said:
With CM instalation CM kernel will be installed. So you can install it when you are on CoCore. I suggest you to make nandroid backup of Stock based JB in CWM, that you can easily go back from CM when you want. If not you need to flash stock based kernel, and then ROM, or to flash firmware with Odin.
Послато са GT-I9070 користећи Тапаталк 4
Click to expand...
Click to collapse
adamuadamu said:
in order to run the rom you don't need to change anything. just flash the MIUI zip, don't leave the recovery and flash libteefolderCM10, then reboot
Click to expand...
Click to collapse
Thanks Guys!
Related
okay i have seen kernel in the android development section there.. there 2 type devil ics/jellybean kernel and a semaphore kernel.. now the problem is how do i use them? or how to flash them?
Read this: http://forum.xda-developers.com/showthread.php?t=1379650
Essentially, you want to use Odin to flash a custom rom that is rooted with clockworkmod recovery. From there, you can simply download the .zip file of the rom to your phone and flash it from recovery mode.
kngroo said:
Read this: http://forum.xda-developers.com/showthread.php?t=1379650
Essentially, you want to use Odin to flash a custom rom that is rooted with clockworkmod recovery. From there, you can simply download the .zip file of the rom to your phone and flash it from recovery mode.
Click to expand...
Click to collapse
so i have to go to recovery mod and then flash the kernel?
Yes but they are for the android versions specified like ICS or JB
Sent from my Awesome I9000 running Slim Bean
Latrop said:
Yes but they are for the android versions specified like ICS or JB
Sent from my Awesome I9000 running Slim Bean
Click to expand...
Click to collapse
alright, im now one cm10 JB so i have to download the JB version then flash it and reboot only?
Yes
Sent from my Awesome I9000 running Slim Bean
Hi all ,noob here, i have upgraded to stock XXLPE some days ago and rooted my GT-I9070P, i have verified that it is indeed rooted and i want to flash a CoCore kernel, however when i try to flash it with Universal Kernel Flash i get an incompatible device error from the application. (This kernel is not supported for you device)
I tried to flash 5.6.2, and 6.2 of either TWRP or CWM versions from http://forum.xda-developers.com/showthread.php?t=2140597
Also in the UKF thread i have found a post reply that says i don't need to have CWM or TWRP i can do it only with UKF.
Any ideas?
tolisp said:
Hi all ,nood here, i have upgraded to stock XXLPE some days ago and rooted my GT-I9070P, i have verified that it is indeed rooted and i want to flash a CoCore kernel, however when i try to flash it with Universal Kernel Flash i get an incompatible device error from the application. (This kernel is not supported for you device)
I tried to flash 5.6.2, and 6.2 of either TWRP or CWM versions from http://forum.xda-developers.com/showthread.php?t=2140597
Also in the UKF thread i have found a post reply that says i don't need to have CWM or TWRP i can do it only with UKF.
Any ideas?
Click to expand...
Click to collapse
Did you unzip file? You need kernel.bin.md5 from zip.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
Did you unzip file? You need kernel.bin.md5 from zip.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
Yes i did, i select the md5 file but i get this error. The only time i don't have this error is if i select the CWM 6.2 version which however is not recognised by UKF anyway so i guess this is why i don't get the error... the kernels that are recognised are labeled as unsupported for my device
Thanks for the quick reply shut_down
tolisp said:
Yes i did, i select the md5 file but i get this error. The only time i don't have this error is if i select the CWM 6.2 version which however is not recognised by UKF anyway so i guess this is why i don't get the error... the kernels that are recognised are labeled as unsupported for my device
Thanks for the quick reply shut_down
Click to expand...
Click to collapse
You have I9070P?
P.S. Yeah, you have. That is why UKF is telling you that your phone is not supported. Because it is not.
shut_down said:
You have I9070P?
P.S. Yeah, you have. That is why UKF is telling you that your phone is not supported. Because it is not.
Click to expand...
Click to collapse
FYI
http://forum.xda-developers.com/showthread.php?t=2137598
INCREMENTAL CHANGELOG:
[Update 1.10]
Minor fixes / cleanup
Added support for GT-I9070P JB version
Added support for CoCore 5.6
Click to expand...
Click to collapse
tolisp said:
FYI
http://forum.xda-developers.com/showthread.php?t=2137598
Click to expand...
Click to collapse
Yeah, but there is no CoCore for P on JB official. You can use it, but it is without NFC. And there was some problems, probably heating maybe. So that is why it is showing that your phone is not supported.
shut_down said:
Yeah, but there is no CoCore for P on JB official. You can use it, but it is without NFC. And there was some problems, probably heating maybe. So that is why it is showing that your phone is not supported.
Click to expand...
Click to collapse
Thanks for this man, i appreciate it, if i am not asking for too much, can you reccomend a kernel for P ?Does the fact that i have XXLPE make a difference?
tolisp said:
Thanks for this man, i appreciate it, if i am not asking for too much, can you reccomend a kernel for P ?Does the fact that i have XXLPE make a difference?
Click to expand...
Click to collapse
For now there is no custom kernel for P, you can use CoCore. Read in his thread what version is best for it. We only have development of CoCore right now, other kernels are abandoned.
Послато са GT-I9070 користећи Тапаток 2
shut_down said:
For now there is no custom kernel for P, you can use CoCore. Read in his thread what version is best for it. We only have development of CoCore right now, other kernels are abandoned.
Послато са GT-I9070 користећи Тапаток 2
Click to expand...
Click to collapse
Thanks a million for all your help mate!, will do!
I'm on stock Rom GB 2.3.6 on my Samsung s plus and I tried to flash any Cyanogen Custom Rom in CWM ( Ics and Jb) and Always i get the same answer . O f course I rooted My phone ,Installed CWM and did all the wipes .Always the same answer no matter what version of Custom rom I tried to flash.What can I do?
Makesure you have to use correct version of cwm to install the cm. I recommend try cyanogenmod 10.1 JB 4.2.x . GO to the cyanogen official rom post (under ADC team).
FOllow all the instruction that stated inside the topic.
Any mismatch of the version of installation can fail to install rom.
Example:
http://forum.xda-developers.com/showthread.php?p=42346733
Sent from my GT-I9001 using xda app-developers app
iulian vu said:
I'm on stock Rom GB 2.3.6 on my Samsung s plus and I tried to flash any Cyanogen Custom Rom in CWM ( Ics and Jb) and Always i get the same answer . O f course I rooted My phone ,Installed CWM and did all the wipes .Always the same answer no matter what version of Custom rom I tried to flash.What can I do?
Click to expand...
Click to collapse
You have i9001
The rom you try to flash is for i9000
mihaitosca said:
You have i9001
The rom you try to flash is for i9000
Click to expand...
Click to collapse
Exactly.
Looks like your installation is failing because the file is for an I9000B. If you want to use CM10.1 on an I9001, you'll need to go here.
I want to using certain kernel on other rom but Idk how . Someone ? :fingers-crossed:
What do you exactly mean? I use Semaphore kernel instaed of the standard-kernel in CM 10.2 ...do you mean something like this???
You have to download a new kernel which is available for you android-version and flash it via Odin....
AmirAnwar said:
I want to using certain kernel on other rom but Idk how . Someone ? :fingers-crossed:
Click to expand...
Click to collapse
AmirAnwar said:
I want to using certain kernel on other rom but Idk how . Someone ? :fingers-crossed:
Click to expand...
Click to collapse
Just download the zip file for the kernel and flash the zip file by going to recovery. And you will get switched to the kernel.
This is the alternative i forgot, thanks:good:
Rohitdahiya said:
Just download the zip file for the kernel and flash the zip file by going to recovery. And you will get switched to the kernel.
Click to expand...
Click to collapse
You don't have to extract kernels from other roms, you can just search on the development page http://forum.xda-developers.com/showthread.php?t=1786220
or you can choose any kernel you want here :
for android 2.3 http://forum.xda-developers.com/showthread.php?t=1112908
and for Jelly Bean : http://forum.xda-developers.com/showthread.php?t=1786220____http://forum.xda-developers.com/showthread.php?t=1795274
just flash the zip file in recovery mode
And have you flashed an other kernel ??? Are you satisfied ?
AmirAnwar said:
I want to using certain kernel on other rom but Idk how . Someone ? :fingers-crossed:
Click to expand...
Click to collapse
Hello,
I want to install Kitkar 4.4 on my Samsung Galaxy Note GT-N7000(India).
I'm completely not aware for this android installation. So please help me.
Please tell me steps and download links. I tried steps which is i got fro internet but most of the time file location was banned by government or removed. So again tried with CWM but still i got stuck. Now I'm using Android Jelly Bean 4.1.2, Build no- JZO54K.N7000DLSC, Kernel version- 3.0.31-906407(SMP PREEMPT WED MARCH 6 19:53:40 KST 2013). This is my phone details. Please suggest me for this model.
Thanks in advance.
Rahul.
I use Firefox with anonimox extesion to bypass the banned's site... But i'm in Italia. You Can try.
The Step to install kilkat are:
Install The correct philz kernel version.
Install the raw kernel and reboot the recovery.
Full wipe.
Install the 4.4 Rom
Install the gapps.
Wipe cache and dalvik
Roboot.
Inviato dal mio GT-N7000 utilizzando Tapatalk
try cm11 by herna (try the latest built by frantisheq) really stable and smooth
btw: full wipe means wipe data, wipe cache, wipe dalvik and manually format /system.
Sent from my GT-N7000 using XDA Premium 4 mobile app
I've tried to install 4.4 kitkat on my note n7000 too but there are too much cusrom, such as asylum,omnirom, cyogenmod and much recovery mode like cwm,twrp, this is make me so frustating, what to choose what to install? If anyone can guide newbie like us step by step and also the link, the best step that never make our phone brick
just stay away from Stock ICS kernel (dont wipe anything using stock ics recovery)
then root your rom and make a backup of your efs (this is the most important step)
now each thread contains all the steps you need to follow, just read them carefully)
I advice you to try herna cm11 (very stable)
regards
Sent from my GT-N7000 using XDA Premium 4 mobile app
done install philz kernel+safe kernel for my JB 4.1.2 and supersu 1.89. Want to install kitkat 4.4 but don't know where to start :crying:
aphinxwu said:
done install philz kernel+safe kernel for my JB 4.1.2 and supersu 1.89. Want to install kitkat 4.4 but don't know where to start :crying:
Click to expand...
Click to collapse
Ok my friend
I use this method to install cm 11 4.4 kitkat
1- I install philz kernel+safe kernel for my JB 4.1.2
2- I install cm 10.2 (4.3) or cm10.1 (4.2.2)
3- I install cm11(4.4)
It work to me and I install 3 kitkat rom
Or as he is already on philz kernel, just flash raw kernel reboot recovery and flash omnirom or asylum omnirom or Nameless Rom or DU or SlimKat
Sent from my GT-N7000 using Tapatalk
Dawood Al Amri said:
Ok my friend
I use this method to install cm 11 4.4 kitkat
1- I install philz kernel+safe kernel for my JB 4.1.2
2- I install cm 10.2 (4.3) or cm10.1 (4.2.2)
3- I install cm11(4.4)
It work to me and I install 3 kitkat rom
Click to expand...
Click to collapse
So if i want to install kitkat, after i install philz kernel then i directly install cm11 (4.4) ? why you install 3 kitkat rom?
treacherous_hawk said:
Or as he is already on philz kernel, just flash raw kernel reboot recovery and flash omnirom or asylum omnirom or Nameless Rom or DU or SlimKat
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
sorry i'm newbie, how to flash raw kernel? flash is mean install? sorry stupid question.
aphinxwu said:
So if i want to install kitkat, after i install philz kernel then i directly install cm11 (4.4) ? why you install 3 kitkat rom?
Click to expand...
Click to collapse
I mean if you want to install kitkat in your phon and you have 4.1.2 by recovery philz you must install cm10.2 Jely been 4.3 after you install 4.3 you can install 4.4 kitkat
I use this method and I install 3 rom kitkat
Dawood Al Amri said:
I mean if you want to install kitkat in your phon and you have 4.1.2 by recovery philz you must install cm10.2 Jely been 4.3 after you install 4.3 you can install 4.4 kitkat
I use this method and I install 3 rom kitkat
Click to expand...
Click to collapse
wow so much step huh. maybe theres a more shortcut way if dont, i'm gonna take your way
aphinxwu said:
wow so much step huh. maybe theres a more shortcut way if dont, i'm gonna take your way
Click to expand...
Click to collapse
Install this recovery
http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip
Aftarthat you can install kitkat 4.4.2
Just flash the raw Kernel from this thread:
http://forum.xda-developers.com/showthread.php?t=2397000
Then reboot into recovery directly (DO NOT reboot into system) then flash directly whatever you want of KitKat based ROMs.
Remember to follow the instructions of each ROM that is mentioned in the opening post of the thread.
kaborayyan said:
Just flash the raw Kernel from this thread:
http://forum.xda-developers.com/showthread.php?t=2397000
Then reboot into recovery directly (DO NOT reboot into system) then flash directly whatever you want of KitKat based ROMs.
Remember to follow the instructions of each ROM that is mentioned in the opening post of the thread.
Click to expand...
Click to collapse
thanks you for the link source. it help me cm10.2 is the latest?
Dawood Al Amri said:
Install this recovery
http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip
Aftarthat you can install kitkat 4.4.2
Click to expand...
Click to collapse
is this recovery support kitkat nameless? i would like to install nameless. thank you for the link
Dawood Al Amri said:
Install this recovery
http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip
Aftarthat you can install kitkat 4.4.2
Click to expand...
Click to collapse
Hey i already follow ur instruction and it works. Thank you. Very happy this is the first time for me changing rom :fingers-crossed:
but there's question i want to ask you, can i still use philz kernel to install rom kitkat? because i prefer philz kernel UI than cwm
Thank you sir
aphinxwu said:
Hey i already follow ur instruction and it works. Thank you. Very happy this is the first time for me changing rom :fingers-crossed:
but there's question i want to ask you, can i still use philz kernel to install rom kitkat? because i prefer philz kernel UI than cwm
Thank you sir
Click to expand...
Click to collapse
as mentioned earlier you need raw kernel to flash omnirom, you will get error if you try to flash using philz kernel.
treacherous_hawk said:
as mentioned earlier you need raw kernel to flash omnirom, you will get error if you try to flash using philz kernel.
Click to expand...
Click to collapse
ooo i understand. what's different between kernel and raw kernel? i install kitkat with cwm it works.
aphinxwu said:
ooo i understand. what's different between kernel and raw kernel? i install kitkat with cwm it works.
Click to expand...
Click to collapse
Raw kernel has SElinux support and that is required to be able to flash kitkat.
treacherous_hawk said:
Raw kernel has SElinux support and that is required to be able to flash kitkat.
Click to expand...
Click to collapse
so cwm is raw kernel too. How we know what kernel is support SELinux? So, if i dont instal philz kernel on my official stock rom before and then directly install cwm, so after that i can install kitkat ?
aphinxwu said:
so cwm is raw kernel too. How we know what kernel is support SELinux? So, if i dont instal philz kernel on my official stock rom before and then directly install cwm, so after that i can install kitkat ?
Click to expand...
Click to collapse
raw kernel r4 is cwm while r5 is TWRP. To root and get custom recovery for your stock rom,you must flash philz kernel. Once you have philz kernel, reboot recovery and from there flash r4 or r5 kernel and again reboot recovery and then do the wipes and flash any kitkat rom with gapps. Kernel with SELinux support are raw kernel, r4 and r5, Asylum kernel http://asylumrom.com/Asylum/Asylum-Roms/KitKat-4.4/N7000/kerner/.