I've been trying to flash a kernel and a modem for a long time now. And it's always been giving me errors.
My modem is XXBMD5, I'm trying to flash it to XXBMG3
For the modem it says:-
Installing: /sdcard/(modem name).zip
Finding update package...
Opening update package...
Installing update...
Installation aborted .
For the kernel (boeffla) i get the status (7) error.
I really need some help , Gonna flash a ROM after flashing the modem and kernel too.
unknownfame said:
I've been trying to flash a kernel and a modem for a long time now. And it's always been giving me errors.
My modem is XXBMD5, I'm trying to flash it to XXBMG3
For the modem it says:-
Installing: /sdcard/(modem name).zip
Finding update package...
Opening update package...
Installing update...
Installation aborted .
For the kernel (boeffla) i get the status (7) error.
I really need some help , Gonna flash a ROM after flashing the modem and kernel too.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------
And can anyone give step by steps instructions on how to flash boot.img files or
how to fastboot it? I've searched and I only see briefly explained tutorials.
No one have really give the proper instructions on I9305.
use latest cwm...
cz4r3n said:
use latest cwm...
Click to expand...
Click to collapse
I am using the latest one which is 6.0.3.6 but not the touch one.
Your modem flash reads as probable faulty file .
JJEgan said:
Your modem flash reads as probable faulty file .
Click to expand...
Click to collapse
It can't be? I downloaded it from samsung-updates.com . Then how do you explain the kernel.
unknownfame said:
It can't be? I downloaded it from samsung-updates.com . Then how do you explain the kernel.
Click to expand...
Click to collapse
Oh I got it all mixed up! What I was trying to flash was the firmware, not the modem. But there isn't any XXBMG3 modem for download now. Sorry for the mixing up! But I need help with the kernel now.
Post does not make any sense .
Flash a modem and flash a kernel then wipe the modem and kernel by flashing a rom .
Hi,
May you give download link for XXBMG3?
Thx before.
Related
Hi,
First, forgive my english, in France our teatcher are french too ^^
So, I tried flash kernel with Odin, and it get FAIL at end.
I tried overcome kernel and modaco (something like that!) and i get same error. Everytime I must reflash an official rom to reboot the tab, because I get the computer with phone link screen and I can't access to recovery (I don't know if you can understand what I try to say )
An idea ? I don't know why I can't flash the kernel...
Thanks you
babysugar said:
Hi,
First, forgive my english, in France our teatcher are french too ^^
So, I tried flash kernel with Odin, and it get FAIL at end.
I tried overcome kernel and modaco (something like that!) and i get same error. Everytime I must reflash an official rom to reboot the tab, because I get the computer with phone link screen and I can't access to recovery (I don't know if you can understand what I try to say )
An idea ? I don't know why I can't flash the kernel...
Thanks you
Click to expand...
Click to collapse
hm....if you tried to do that from Stock firmware, you can't because you have a protected bootloader.....it happened to me as well ....but there is a solution:
1. go in download mode....if you can. If is showing phone - ? - computer, no problem, just flash with PIT file! it works.
2. flash the stock firmware once again via Odin from SamFirmware
3. once you done, root you tab with SuperOneClick.
4. Apply the patch
5. Flash again the kernel . Overcome_Kernel_v1.0.tar (5.50 MB) don't flash the latest on; if you coming from stock , you need to flash this version, and after conversion to Ext4 you can update...
....BTW you have a very good tutorial here. just follow it. hope it helps!
Thanks !
I will try !
Woaw, worked as well !!
It was just the bootloader !
Thanks for your help !
nice to see you back !!!!
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
ossamatarek said:
I was trying to install ICS to my galaxy note, it wasn't rooted and I was running GB 2.3.6
Now I can access *Power+home+Volume down*
Any ideas?
Thanks in advance.
Click to expand...
Click to collapse
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Akiainavas said:
You CAN or CANT access download mode ? If you can, simply flash a stock ROM via ODIN.
Click to expand...
Click to collapse
Yes I can, I tried to downgrade to GB but it failed as well :/
I don't really clearly understood your issue.
But if you want to flash a Stock ICS Rom, start ODIN PC, start your SGNote in download mode (button volume down + home + power), then connect your SGNote to your PC and flash via ODIN PC.
If you don't know exactly how to use ODIN PC, check tutos on the forum.
ossamatarek said:
Yes I can, I tried to downgrade to GB but it failed as well :/
Click to expand...
Click to collapse
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
ossamatarek said:
Sorry I wanted to upload a screen shot for it but it won't let me.
http : // imageshack.us/f/339/43186614. png/ *Remove spaces*
Click to expand...
Click to collapse
I'm at work right now and I can't view imageshack because it's blocked on this computer.
andreww88 said:
I'm at work right now and I can't view imageshack because it's blocked on this computer.
Click to expand...
Click to collapse
Thanks for trying to help
Reinstall your ADB/USB drivers, make sure you're using USB2.0 port - for me USB3.0 always results in failed flash, ultimately switch USB ports.
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
The file you download from dr. Ketan is a .rar file, unzip it once and you get a .tar file. Flash that file with Odin in pda section. So don`t unzip the .tar file again.
andreww88 said:
When you say "it failed" you are going to have to be more specific. Please give us an error message. Did you get a NAND write start and factoryfs.img and it just freeze after that in Odin?
Click to expand...
Click to collapse
The problem was the ROM itself
I flashed a new 4.0.3 and it worked perfectly
Thanks a lot.
Richard.p.struike said:
i have a problem with odin too..
i realy like to install this rom:http://forum.xda-developers.com/showthread.php?t=1609252
i have flashed to stock, have odin. but this rom has the following files:
Folder:
Data
meta-inf
Sdcard
System
Files:
Flash_image
modem
ZImage
how can i set this up in Odin so that i can flash this rom?
i've used DR. Ketan's guide to unroot..
who can help me?
Click to expand...
Click to collapse
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Akiainavas said:
To start with - you need root to flash this custom ROM, so unrooting your device was a mistake, you have to root it again.
Now, i've never flashed Criskelo's ROM, but from what i've read in the thread, you need to root your device, flash Chainfire's ICS repack via mobile odin, and then flash criskelo rom via CWM. Do not unpack the .zip file, you need to point CWM to that file.
Click to expand...
Click to collapse
witch rom should i install first then?
and then with CWM to the zip file i can install this rom. thats nice
Who can help me with the rom i should have running on my note before i start this?
You should be on rooted ICS. Then you flash Criskelos rom from CWM
ossamatarek said:
Thanks for trying to help
Click to expand...
Click to collapse
upload it somewhere else then!
Belfia said:
You should be on rooted ICS. Then you flash Criskelos rom from CWM
Click to expand...
Click to collapse
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Richard.p.struike said:
i've downloaded
N7000XXLPY
and root my device
but i don't see any CWM ?
i see super user but no cwm..
what am i doing wrong or what am i forgetting..
can't remember flashing was this hard on my HTC and Samsung Wave.....
who can help me out plz?
Click to expand...
Click to collapse
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
andreww88 said:
When you boot into recovery, is it CWM recovery?
If you are talking about not seeing the CWM app, don't worry about that.
Click to expand...
Click to collapse
no still boots android revovery
i've tried 3 times but still the same
Richard.p.struike said:
no still boots android revovery
i've tried 3 times but still the same
Click to expand...
Click to collapse
So you have to flash the CWM.zip file found in drketan's thread in android development.
Hello.
The phone is Samsung GalaxyS i9000.
I have installed cm10 from this thread: http://forum.xda-developers.com/showthread.php?t=1778526
and i got bootloop, so I can start os or start cmw (volume up+home+power), only download mode works fine.
I tried to reinstall CMW from this link: http://www.clockworkmod.com/rommanager , but there is "..../recovery-clockwork-2.5.1.2-galaxys.zip" and Odin does not work with "zip" files, only "tar" for recovery.
Sorry for my english.
Regards.
GZep89 said:
Hello.
The phone is Samsung GalaxyS i9000.
I have installed cm10 from this thread: http://forum.xda-developers.com/showthread.php?t=1778526
and i got bootloop, so I can start os or start cmw (volume up+home+power), only download mode works fine.
I tried to reinstall CMW from this link: http://www.clockworkmod.com/rommanager , but there is "..../recovery-clockwork-2.5.1.2-galaxys.zip" and Odin does not work with "zip" files, only "tar" for recovery.
Sorry for my english.
Regards.
Click to expand...
Click to collapse
https://www.dropbox.com/s/d382m2kyorzum16/ezbase recovery kit gb.zip
flash your phone with ezodin..all instructions given
Thank you!
pp_prathap said:
flash your phone with ezodin..all instructions given
Click to expand...
Click to collapse
Thank I LOT, it works fine now, I hope
After all, I got an error when installing Clockmod recovery:
Install from package...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Click to expand...
Click to collapse
So, just need to flash PDA part via Odin this file:
CF-Root-XX_OXA_JVO-v3.2-CWM3RFS.zip (tar inside zip archive)
from this thread: http://forum.xda-developers.com/showthread.php?t=788108
finally I installed cm9.
P.S. mby someone got similar problem.
Hey
there is an easy guide..this'll flash 2.3.6 value pack
Guide: http://www.androidauthority.com/galaxy-s-gt-i9000-gingerbread-xwjw1-firmware-52955/
To root 2.3.6 go to : http://www.androidauthority.com/galaxy-s-clockworkmod-recovery-51392/
Simple using Odin...and yeah after rooting this u can flash CM9 through CWM...and remember to make the wipes...
hi
I'm writing for the first time although I've been visiting the forum for couple of weeks as I'm facing a problem with my samsung SGH-I897.
PROBLEM HISTORY
it was a present to me which was already rooted and loaded with ICS rom (I can't remember the version, kernel, baseband or build no). 2 weeks back, I tried to upgrade the phone with JB Slim custom rom (www.android.gs/update-galaxy-captivate-i897-jelly-bean-slim/) but stuck with AT&T bootlogo. I tried to go back to ICS again but accidentally did something wrong in CWM recovery (don't know the version) for which CWM went back to original 3e version.
Since then I couldn't load any rom (by CWM or Odin) bcos there was error in CWM saying failed to mount /dbdata... etc. 2 days ago I found a fix for that in blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
Then I loaded GB rom 2.3.5 , baseband I897UCKJ1 , kernel 2.6.35.7-I897UCKJ1-CL614489 . But my CWM is still 3e.
THE PROBLEM NOW
1) I am trying to update the captivate but every time I try to update I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
I've tried Lanight, Slim Rom (again) but no use. what should I do?
2) Maybe there is a kernel issue (it says here forum.xda-developers.com/showthread.php?t=1874327 ). So to flash new kernel I followed the instruction from androidprof.blogspot.com/2013/02/upgrading-rooting-and-then-installing.html?goback=%2Egde_86481_member_213543419 and forum.xda-developers.com/showthread.php?t=1350266 but Odin hangs at midpoint and the captivate becomes softbricked. Then again I have to load the GB. is the odin defective? (I used odin 1.85 & odin3)
3) I tried to load GB I897UCKK4 by one click odin installer but it hanged everytime. why?
thanx in advance
Sent from my GT-I9070 using xda app-developers app
shiploo35 said:
hi
I'm writing for the first time although I've been visiting the forum for couple of weeks as I'm facing a problem with my samsung SGH-I897.
PROBLEM HISTORY
it was a present to me which was already rooted and loaded with ICS rom (I can't remember the version, kernel, baseband or build no). 2 weeks back, I tried to upgrade the phone with JB Slim custom rom (www.android.gs/update-galaxy-captivate-i897-jelly-bean-slim/) but stuck with AT&T bootlogo. I tried to go back to ICS again but accidentally did something wrong in CWM recovery (don't know the version) for which CWM went back to original 3e version.
Since then I couldn't load any rom (by CWM or Odin) bcos there was error in CWM saying failed to mount /dbdata... etc. 2 days ago I found a fix for that in blog.kalpetros.com/2012/04/how-to-fix-cant-mount-dbdata-error-sgs.html
Then I loaded GB rom 2.3.5 , baseband I897UCKJ1 , kernel 2.6.35.7-I897UCKJ1-CL614489 . But my CWM is still 3e.
THE PROBLEM NOW
1) I am trying to update the captivate but every time I try to update I get this:
-- Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
I've tried Lanight, Slim Rom (again) but no use. what should I do?
2) Maybe there is a kernel issue (it says here forum.xda-developers.com/showthread.php?t=1874327 ). So to flash new kernel I followed the instruction from androidprof.blogspot.com/2013/02/upgrading-rooting-and-then-installing.html?goback=%2Egde_86481_member_213543419 and forum.xda-developers.com/showthread.php?t=1350266 but Odin hangs at midpoint and the captivate becomes softbricked. Then again I have to load the GB. is the odin defective? (I used odin 1.85 & odin3)
3) I tried to load GB I897UCKK4 by one click odin installer but it hanged everytime. why?
thanx in advance
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
From your signature, you have a GT-I9070, which is a different device. This section is for the Captivate.
Perhaps this link can help you: http://forum.xda-developers.com/showthread.php?t=1985398
NO, it's Captivate
BWolf56 said:
From your signature, you have a GT-I9070, which is a different device. This section is for the Captivate.
Perhaps this link can help you: http://forum.xda-developers.com/showthread.php?t=1985398
Click to expand...
Click to collapse
I used my wife's cell to post. So it is Captivate SGH-I897 that is giving me problem.
See TRusselo's Guide here ---> http://forum.xda-developers.com/showthread.php?p=19425513
Sent from my SAMSUNG-SGH-I747 using xda premium
tried and didn't work
4-2ndtwin said:
See TRusselo's Guide here ---> http://forum.xda-developers.com/showthread.php?p=19425513
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
Yes I've tried but odin hangs during flashing of speedmod kernel (everytime).
THANX anyway.
Did ya take a look at this Captivate - PC Connection Issues thread ?? ...http://forum.xda-developers.com/showthread.php?p=33227541
And u could flash the .tar file of KK4 Corn Kernel instead of the Speedmod kernel...http://forum.xda-developers.com/showthread.php?p=18233847
Sent from my SAMSUNG-SGH-I747 using xda premium
odin hangs
4-2ndtwin said:
Did ya take a look at this Captivate - PC Connection Issues thread ?? ...http://forum.xda-developers.com/showthread.php?p=33227541
And u could flash the .tar file of KK4 Corn Kernel instead of the Speedmod kernel...http://forum.xda-developers.com/showthread.php?p=18233847
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
thank you 4-2ndtwin,
I think the pc connection is ok bcos I can flash the GB 2.3.5 I897UCKJ1 ROM by odin 3. (infact it's the only ROM I can flash)
And Odin cannot flash the kk4 kernel, it hangs at midpoint.
SO FAR HERE GOES THE SUMMERY
I can only flash the above mentioned ROM. No other ROM, kernel, CWM recovery can't be loaded by Odin 1.85 or 3.
Same goes for flashing through recovery mode. there's always signature verification failure error (see 1st post)
bad usb driver, connector or cable can cause intermittent fail like that, mid flash, even though it looks okay when you start. also, have you tried redownloading your sources? signature verification can mean failed md5 checksum= corrupt source file.
Out of curiosity, did you accidentally enable the signature verification in speedmod? I did that yesterday while installing Captivating and it'll throw the signature verification error lol. Just click it again in CWM and you should be able to get passed the signature verification.
laughingT said:
bad usb driver, connector or cable can cause intermittent fail like that, mid flash, even though it looks okay when you start. also, have you tried redownloading your sources? signature verification can mean failed md5 checksum= corrupt source file.
Click to expand...
Click to collapse
I don't know, if it's bad usb driver, connector or cable how come they always give trouble during flashing everything except I897uckj1 rom?
and, I'll try redownloading the sources (have to browse the history)
nope
x0ne215 said:
Out of curiosity, did you accidentally enable the signature verification in speedmod? I did that yesterday while installing Captivating and it'll throw the signature verification error lol. Just click it again in CWM and you should be able to get passed the signature verification.
Click to expand...
Click to collapse
there's no such option in my cwm. the cwm is 3e and very limited. it has only 4 option... reboot, update from zip, wipe factory data, wipe cache.
CWM and 3e recovery are 2 different things. CWM is a CUSTOM recovery, 3e is the stock recovery. It sounds like you're still on stock recovery.
Have you tried using ADB to push a CWM recovery.img to the device? There should be some tutorials or posts on other threads here about doing it. I had to do that for my Pantech Crossover.
Once you do that, you can flash a ROM no problem.
x0ne215 said:
... It sounds like you're still on stock recovery
Have you tried using ADB to push a CWM recovery.img to the device?....
Once you do that, you can flash a ROM no problem.
Click to expand...
Click to collapse
ok thanx, this ADB thing is sounds complicated to me. but I'll learn it.
bad news
ok... bad news.. phone is hard bricked... no download mode, no charging battery display when plugged to wall... this is going near to the end.
Time to build a jig. See the how to if you want to diy. There are a few you can buy online if you're lazy
Sent from my SGH-I897 using xda app-developers app
It's quicker and easier to just do it yourself, there's a no solder method on the forums here.
I'm trying
yes.. I'm following this 2 solderless threads jig without cutting usb cord and jig with cutting usb cord
but no luck yet, have to identify the problem. is there any suggestions about these methods or any other?
What problem? Only follow 1 of the guides, they're different, hence why there's 2.
Hello,
I've been stuck on this problem all the afternoon and evening.
Here it is : I got my mother's n7000 offered, which has never been flashed before. Today, I'd like to install CM10.1. I want to install CWM (PhilZ) in order to flash CM.
When I try to "apply update from sdcard" in the stock recovery (file: PhilZ-cwm6-XXLT4-OXA-4.93-6-signed.zip) it tells me that E:signature verification failed.
And when I try to use Odin, to flash a PDA (.tar.md5), it get stuck on "NAND Write Start!!".
Concerning Odin, I found out it could be a problem that has to do with the phone partitioning and that I should flash a PIT file to resolve that problem. So I used Odin to 'flash' a PIT file. But still, this doesn't resolve the CWM installation problem...
Anyone has an idea on why is this happening and how could I get out of this mess?
Thanks in advance! Bye!
Up please, can anyone help ?
Thanks XDA community.
cannadams said:
Up please, can anyone help ?
Thanks XDA community.
Click to expand...
Click to collapse
What worked for me back in the day was using
http://forum.xda-developers.com/showthread.php?t=1901191
An older version from here, for example << 03.06.2013 - PhilZ-cwm6 v5.06.1 with CWM 6.0.3.2 based recovery >>
Then once that is installed, reboot to recovery again and install the new "advanced version"
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000/ (4.84.3 ZIP)
Then restart and you should be able to flash the one you wanted.
Also, try using older ODIN version, I think I use 1.87 or something like that, definitely not 3+.
Thank you for your help, I succeeded installing Philz 5 via Odin 1.85, then updating to CWM (KitKat compatible), then installing NightOwl (Android 5.1.x with CM12) Beta4
Once again, thank you!