Related
I have the wifi only 7310 model of the 8.9
Overcme CwM Recovery 5.1.2.6
ROM was Galaxian Soup AOSP 1.6
My tablet resets during recovery. Half through a data wipe ROM install ROM backup or ROM restore it will reset and reboot.
It first happened when i booted into recovery and triedROM issue. to make a back up of m y current ROM and attempt to flash the aokp one. It reset during the backup process.
It shouldn't be a ROM issue. My tablet did this once before, it would reset when i did anything involvng dataon an Overcome ROM i think. Data wipe/backup etc. I left it alone while the ROM still worked and tried again a week later with no issues.
Any ideas? Now i have a soft brick that cant boot past the Samsung Screen. I can get into recovery and download modes.
EDIT* added a video
EDIT2:
The issue was solved.
What ended up happening what i attempted to flash back to stock software, ODIN would stall during the system.img. From this point i thought it was done, but i could still get into the stock recovery, i used the stock recovery to wipe the data after several failed attempts in a similar manner to this video.
One day it just worked. I could finally wipe data and cache without a reset. But i could't flash a file because ODIN would still freeze on the system.img. It was suwandiapr who showed me his walkthrough to push an file to recovery from adb. Thank you so much
I do NOT know why it my tablet/recovery starting resetting when i wanted to do a data/cache wipe/restore or why it decided to start doing it again. I tried the 5.5 cwm, the overcome 5.1 and the stock and none of them worked. Today i tried it on an off chance of boredom and it started working again. It is a confusing situation but that is what happened.
Again that you so much to Mr.Home and especially suwandiapr for all your help
> If you had a back up you can do advanced restore of just your system partition to get you tablet back on, though you will probably still have problem with the recovery
> If not, download the stock firmware tar.
Boot up to download mode using the power + vol combo.
flash the stock tar through odin.
boot up to download mode again.
this time flash the cwm recovery.
boot up to recovery mode.
wipe dalvikcache and data.
install aokp and gapps.
if it fails (cwm recovery stuck and reboots by itself during wiping /data partition or dalvik cache)
,chances are your data partition had been corrupted.
You can try fixing this by reflashing the stock firmware tar through odin again
just this time you need to have re-partition ticked.
and repeat above steps.
Take note that this will format the content your sd card too apart from the /data partition
EDIT: Please post this on the general section next time
MrHome said:
> If you had a back up you can do advanced restore of just your system partition to get you tablet back on, though you will probably still have problem with the recovery
> If not, download the stock firmware tar.
Boot up to download mode using the power + vol combo.
flash the stock tar through odin.
boot up to download mode again.
this time flash the cwm recovery.
boot up to recovery mode.
wipe dalvikcache and data.
install aokp and gapps.
if it fails (cwm recovery stuck and reboots by itself during wiping /data partition or dalvik cache)
,chances are your data partition had been corrupted.
You can try fixing this by reflashing the stock firmware tar through odin again
just this time you need to have re-partition ticked.
and repeat above steps.
Take note that this will format the content your sd card too apart from the /data partition
EDIT: Please post this on the general section next time
Click to expand...
Click to collapse
Sorry for the wrong section, it didn't seem like a general question to me. How do i use ODIN?
bdfull3r said:
Sorry for the wrong section, it didn't seem like a general question to me. How do i use ODIN?
Click to expand...
Click to collapse
Download Odin 1.85
Install Samsung USB drivers (should come with Kies)
Download stock firmware from samfirmware
Check the box beside PDA
Put the .md5 file into the PDA slot
Leave all other options on defaults
Put tablet into Download Mode (power and vol -, select the one that isn't recovery)
Connect it to your PC
Press START in Odin
Wait ~10 minutes
NOTE: this shouldn't wipe the internal sdcard. if you need to wipe that, select repartition and give Odin a PIT FOR THE P7310/7300 MAKE SURE IT'S THE RIGHT ONE OR YOU WILL BRICK BADLY.
Moved To General​
I understand this might be a development related question, but questions do not belong here.​
im still bricked so if ANYONE has any ideas please let me know.
Do you have a backup of yours in computer? If yes.. Push your file to device with adb...
Or replace with cwm 5.5.0.4.. ( if you not familiar with odin)
From cwm recovery 5.1.2.6 mount your /data and /system..
After that push your file (cwm 5.5.0.4. Zip and your backup file) to sdcard trough adb
Install cwm 5.5.0.4 from your recovery..then reboot..
Before you install your backup file.. Try to wipe and reboot your phone.. If problem still exist.. Your assumption about ROM may right.. But if your booting problem disappear.. I think its because yor recovery..
suwandiapr said:
Do you have a backup of yours in computer? If yes.. Push your file to device with adb...
Or replace with cwm 5.5.0.4.. ( if you not familiar with odin)
From cwm recovery 5.1.2.6 mount your /data and /system..
After that push your file (cwm 5.5.0.4. Zip and your backup file) to sdcard trough adb
Install cwm 5.5.0.4 from your recovery..then reboot..
Before you install your backup file.. Try to wipe and reboot your phone.. If problem still exist.. Your assumption about ROM may right.. But if your booting problem disappear.. I think its because yor recovery..
Click to expand...
Click to collapse
I've tried switching recoveries, the device still resets like in the video posted above
bdfull3r said:
I've tried switching recoveries, the device still resets like in the video posted above
Click to expand...
Click to collapse
I never try it before.. how about stock recovery? It will wipe your data partition include SD card..But it worth to try if you dont like ODIN..
here is the zip version..Instal from recovery..
Edit: Do with your own risk..
After looking at the video, I noticed something similar that had happened to me before.
It happened when I tried to wipe the "cache" first, instead of wiping only the "dalvik cache".
After that, whenever i tried to wipe the dalvik cache/reset factory data,
the recovery reboots by itself halfway through.
MrHome said:
After looking at the video, I noticed something similar that had happened to me before.
It happened when I tried to wipe the "cache" first, instead of wiping only the "dalvik cache".
After that, whenever i tried to wipe the dalvik cache/reset factory data,
the recovery reboots by itself halfway through.
Click to expand...
Click to collapse
But how do i fix it?
bdfull3r said:
But how do i fix it?
Click to expand...
Click to collapse
Check the thread in my signature on the ODIN How-To, Drivers (no Kies/Bloat needed for drivers) and more. If I were you I'd ODIN so the Stock Recovery is restored in place. Looks like something went wrong in your CWM Recovery's installation (could be a bad download you had, it happens). All the files you need (except for the ODIN image) are in my General Guide.
nirogu325 said:
Check the thread in my signature on the ODIN How-To, Drivers (no Kies/Bloat needed for drivers) and more. If I were you I'd ODIN so the Stock Recovery is restored in place. Looks like something went wrong in your CWM Recovery's installation (could be a bad download you had, it happens). All the files you need (except for the ODIN image) are in my General Guide.
Click to expand...
Click to collapse
Its not the recovery, i have changed recoveries two or three times now through ODIN and they all perform the same way
bdfull3r said:
But how do i fix it?
Click to expand...
Click to collapse
Well, i just don't wipe cache. Only the dalvikcache and all went well..
I have a soft brick, no memory or sd card data. I can get into recovery but i don't have any files on the tablet to flash.
Are you windows user? if yes..
Just like my answer from previous post.. See page one!
Mount your /system and /data partition from recovery menu..(from cwm)
From your computer.. Use this tools for pushing the file flashable.zip to device..
After that you can flash a new rom from recovery..
http://forum.xda-developers.com/showthread.php?t=1539352
Thank you so much sir. I worked and I no longer have a brick
bdfull3r said:
Thank you so much sir. I worked and I no longer have a brick
Click to expand...
Click to collapse
Glad to hear that..
Add your thread subject with [solve] for closing the thread..
I'm a noob I know and yes I watched the noob-video. But I need help! Cuz I'm too dump! So please help me
I wanted to update my Galaxy S Plus to the newest CM 10 (Beta 4) (before it was the Beta 3) over the CWM recovery it suddenly says
"symlinks failed"
"error in /sdcard/cm-10-20130324-invendor-beta4-ariesve.zip"
"(Status 7)"
"installation aborted"
so I looked to the CWM recovery and I saw that I don't have the latest version....okay I downloaded the latest one and installed it over the CWM recovery. The same error .... with friends. Now I got when I went into the CWM recovery: (after I tried to wipe data/factory reset or wipe cache)
"E:Can't mount /cache/recovery/log"
"E:Can't open /cache/recovery/log"
"E:Can't mount /cache/recovery/last_log"
"E:Can't open /cache/recovery/last_log"
I tried to restart the phone...black-screen after the samsung cyanogen mod screen.
Okay
So I tried to flash a older firmware "I9001XXKQ7_I9001DBTKP2_I9001XXKPK_HOME.tar.md5" with Odin. I restarted the phone...nope black screen. I installed the newest CWM recovery again and tried to flash again the CM 10. Black-screen. So I tried the old version of the CM which I had before (Beta 3) -> black-screen and still errors in the recovery mode.
I can still go into the download mode and the recovery mode. The charging symbol is not working when i connect it (just the battery but bot moving)
My device:
Samsung Galaxy S Plus
Provider: Vodafone IT
ROM: CM 10 (Beta 3) installed but not working
Kernel: Phenom 3.2 UV (updated after the symlinks failed error)
I hope some genius out there can help me
And sorry for my bad english...I don't use it often (Italy)
Follow my HOW TO Guide at Bottom till you get to Flash CM 10 and use the one you want
Remember Use PIT and Re-Partition to Flash 2.3.6..then Root then use yours!
Will clear up any errors you may have
Thanks!
Hey! Thanks a lot! I'll try it out and report it if its working :good:
EwOkie said:
Follow my HOW TO Guide at Bottom till you get to Flash CM 10 and use the one you want
Remember Use PIT and Re-Partition to Flash 2.3.6..then Root then use yours!
Will clear up any errors you may have
Click to expand...
Click to collapse
!!!!!!!!
dont download the files there!
i think they are for i9000, but the thread starter has an i9001
!!!!!!!!!
have you tried to flash a recovery like CWM 5.x.x.x via odin? it is stable. i think it is linked in the i9001 development at the CM9 Rom by arco
edit: just found
http://forum.xda-developers.com/showthread.php?p=39640245
Regards
Okay
Okay! I didn't do it yet sooo ... I'll try that one and thanks for the link! :good:
then...?
"have you tried to flash a recovery like CWM 5.x.x.x via odin? it is stable. i think it is linked in the i9001 development at the CM9 Rom by arco"
I flashed the CWM recovery via odin, I could format now tho folders and mount them again, but the recovery always freezes when I wanna format the user data. Why? and what should I do as my next step?
Imanidiot said:
I flashed the CWM recovery via odin, I could format now tho folders and mount them again, but the recovery always freezes when I wanna format the user data. Why? and what should I do as my next step?
Click to expand...
Click to collapse
take your time...
what errors does the cwm 5.5.0.4 recovery shows without doing anything?
try to additionally mount system and data partition (see under <mount and storage>)
then click on wipe data/factory reset in the main menu
Hi everybody I'm new.
My situation is exactly the same, I did the same things, got the same problems... got stuck with no solutions yet if not to send it to samsung assistance.
Flashad many other android phones in the past and never had issues like this... it's a nightmare...
try to additionally mount system and data partition (see under <mount and storage>)
then click on wipe data/factory reset in the main menu
Click to expand...
Click to collapse
Without doing anything the recovery says nothing....just the normal main-screen.
After I mounted system and data I click on wipe data/factory...but then it doesn't do anything. It freezes after "Formatting /data..."
I flashed the FeaMod Recovery v.1.2. based on CWM v5.0.2.7
Imanidiot said:
Without doing anything the recovery says nothing....just the normal main-screen.
After I mounted system and data I click on wipe data/factory...but then it doesn't do anything. It freezes after "Formatting /data..."
I flashed the FeaMod Recovery v.1.2. based on CWM v5.0.2.7
Click to expand...
Click to collapse
I also tried the broodROM RC5, succesfully flashed with Odin but still the same problems as before.
Can't format /data.
Stock-Firmware
I am trying to flash now the latest stock firmware with Odin...hopefully it will work.... Still waiting for other ideas :/
Imanidiot said:
I am trying to flash now the latest stock firmware with Odin...hopefully it will work.... Still waiting for other ideas :/
Click to expand...
Click to collapse
I already did that too but it didn't work...
I'm gonna go to the samsung assistance in the afternoon... :crying:
Well....Nothing is working...Anyone who could help me? ... Or better us..
If my guide is no use to you as its for i9000 : try this HERE
If that helps you in any way let me know.
I did this already... I flashed it with the newest stock-FW but it doesn't do anything...and the stock-recovery can't make a factory reset. It always freezes....
other things that could be worth a try:
try flashing different recoveries - not only feamod... also cwm,...
for me cwm5.5.0.4 works
look: our wiki-page -> un-brick
if all doesnt help you could try to reset all partitions
I tried already a few recoveries...like the CWM or the TeamWin... How can I reset them? Can you give me a link please? ^^
Flash BroodROM RC 5... flash this multiple times without touching any buttons like repartion etc..
After that, wipe system and data via the recovery provided in the ROM.
Then flash the newest stock FW from samsung..
This solved all my issues multiple times xD
thanks for the reply, but my phone is now finally brocked....it doesn't even start....and I don't have any idea what i can do now...
??
So, now Samsung, no Samsung Galaxy S Plus GT-I9001? No nothing. Not even the soft brick image (see wiki)
Hello Everybody, My phone is Samsung Galaxy Ace S5830 and I have an issue.I am the one who is changing rom constantly.I was using the rom named ''Xperiance-Ace-v4_Sky_Walker_Studios'' for a long time.Lately i loaded another rom, 2 hours after i used, The phone was closed by itself, I tried open phone again but it stayed at boot animation screen.After that, I thought that rom is spoilt, I tried other roms but they stayed at boot animation screen as well.I tried all of roms that i have but result was same.I thought that i should try the rom which i was using before all those problems started.So i flashed Xperiance-Ace-v4_Sky_Walker_Studios Rom.Bizarre but it worked.When it opened i have faced with some pop-up ''android upgrading 0/70'' when it finished (70/70) i was at homescreen and all of my apps that i downloaded when i was using this rom at old days was there.It was so weird, And all aplications started to stop itselves and i even havent touched any of them. Like ''Unfortunately Whatsapp has stopped'' ''Unfortunately contacts has stopped'' ''Unfortunately facebook has stopped'' finally they all stoped working and i tried open applications, No application opened even contacts.
Present state: Only one rom is working, Others staying at boot animation screen and the rom which is working actually not working, Only phone is opening, No application working
What is the Problem? What Should i do? I am waiting your answers, THANKS.
Talha10 said:
Hello Everybody, My phone is Samsung Galaxy Ace S5830 and I have an issue.I am the one who is changing rom constantly.I was using the rom named ''Xperiance-Ace-v4_Sky_Walker_Studios'' for a long time.Lately i loaded another rom, 2 hours after i used, The phone was closed by itself, I tried open phone again but it stayed at boot animation screen.After that, I thought that rom is spoilt, I tried other roms but they stayed at boot animation screen as well.I tried all of roms that i have but result was same.I thought that i should try the rom which i was using before all those problems started.So i flashed Xperiance-Ace-v4_Sky_Walker_Studios Rom.Bizarre but it worked.When it opened i have faced with some pop-up ''android upgrading 0/70'' when it finished (70/70) i was at homescreen and all of my apps that i downloaded when i was using this rom at old days was there.It was so weird, And all aplications started to stop itselves and i even havent touched any of them. Like ''Unfortunately Whatsapp has stopped'' ''Unfortunately contacts has stopped'' ''Unfortunately facebook has stopped'' finally they all stoped working and i tried open applications, No application opened even contacts.
Present state: Only one rom is working, Others staying at boot animation screen and the rom which is working actually not working, Only phone is opening, No application working
What is the Problem? What Should i do? I am waiting your answers, THANKS.
Click to expand...
Click to collapse
Are you do a full wipe, before flashing another custom rom?
I did Wipe data factory reset, Wipe cache partition, Advanced>Wipe Dalvik cache
Talha10 said:
I did Wipe data factory reset, Wipe cache partition, Advanced>Wipe Dalvik cache
Click to expand...
Click to collapse
I suggest you install the stock rom using odin. It seems you have some corrupted files. Before flashing the stock rom, do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats. Once you have flashed the stock rom, go to recovery mod and do Wipe Data/ Factory Reset and Wipe Cache Partition (otherwise bootloop might occur). After that install root and CWM from the recovery mod. Now you can install any other custom rom without any problem. Do post your results. Hope I Helped
When i connect phone to the computer, connecting text under phone logo is occuring in kies, But not connecting
And neither in download mode nor not in download mod odin can't see the phone at all
Talha10 said:
When i connect phone to the computer, connecting text under phone logo is occuring in kies, But not connecting
And neither in download mode nor not in download mod odin can't see the phone at all
Click to expand...
Click to collapse
Uninstall kies, and then download driver for galaxy ace.
Maybe, there is something wrong with your recovery, what recovery do you use?
---------- Post added at 06:03 AM ---------- Previous post was at 06:00 AM ----------
Talha10 said:
When i connect phone to the computer, connecting text under phone logo is occuring in kies, But not connecting
And neither in download mode nor not in download mod odin can't see the phone at all
Click to expand...
Click to collapse
Uninstall kies, and then download driver for galaxy ace.
Maybe, there is something wrong with your recovery, what recovery do you use?
And, try redownload, and flash that rom again. Maybe, it's corrupted.
i unistalled and nothing happened.
And there is no problem about driver because pc is recognizing the phone which means it's was already updated.
ClockworkMod Recovery version is v4.0.0.9
And i flashed many times
Talha10 said:
i unistalled and nothing happened.
And there is no problem about driver because pc is recognizing the phone which means it's was already updated.
ClockworkMod Recovery version is v4.0.0.9
And i flashed many times
Click to expand...
Click to collapse
Try installing CWM 5 from the recovery mod. CWM 5 is much more stable than CWM 4. Once you have installed CWM 5, do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats. Then try to flash any working rom with it. Here is the link,
CWM 5.0.2.6 fix for Samsung Galaxy Ace S5830
Do post your result. Hope I Helped
i did all of the things that you said but result is same
edit: Yeeeesss now i istalled Xperiance-Ace-v4_Sky_Walker_Studios but it wasnt like old instalations, Old applications didn't come.Rom was opened like new phone, There is no problem now, Everything in phone are opening.
But why could'nt i install other roms.Of course i can continue with this rom it's better than none i mean at least i can use phone without problem.It is perfect but if can we solve the problem for other roms it will be very perfect, By the way thank you for your helps
Talha10 said:
i did all of the things that you said but result is same
edit: Yeeeesss now i istalled Xperiance-Ace-v4_Sky_Walker_Studios but it wasnt like old instalations, Old applications didn't come.Rom was opened like new phone, There is no problem now, Everything in phone are opening.
But why could'nt i install other roms.Of course i can continue with this rom it's better than none i mean at least i can use phone without problem.It is perfect but if can we solve the problem for other roms it will be very perfect, By the way thank you for your helps
Click to expand...
Click to collapse
Bro, are you sure you can't install any other rom with CWM 5? Never forget to do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats before you install any other rom. Also click the Thank button to thank us for our time. Do post the results. Hope I Helped
mahithm said:
Bro, are you sure you can't install any other rom with CWM 5? Never forget to do Format Data/ Factory Reset, Format Cache Partitions, Mount & Storage> Format /system, Wipe Dalvik Cache and Wipe Battery Stats before you install any other rom. Also click the Thank button to thank us for our time. Do post the results. Hope I Helped
Click to expand...
Click to collapse
Yes im sure i do all of them always
Soft brick after CM installer
Hi guys, I could really need some help here. I tried the Cyanogenmod installer and everything went fine, except my phone was stuck in
bootscreen for too long time (never booted).
In CWM recovery I did a factory reset/wipe, reboot, but to no avail; still stucked on CM bootscreen.
I then tried to flash CM11 by recovery sideloader. This goes to 100% and recovery says "Installing update", but nothing happens.
Is it supposed to install and finally reboot by itself, or should I do something?
I tried to installed zip from SD-card, but got "E:Can't mount /sdcard". I guess that means that I can't push the .zip over ADB to /sdcard
either.
What else can I try?
Edit: I wiped /data and then I could suddenly push the .zip to /data/media and the, finally flash the .zip from sdcard!
Why on earth the installer didn't wipe everything from the beginning, I don't get...
Did I miss anything obvious about the wiping thing?
A factory reset should do the trick normally. But if you ever get a message that you can't mount something you have to wipe that partition in recovery. I haven't used CWM in a long time. I prefer twrp as a recovery these days
Sent from my HTC One using XDA Premium 4 mobile app
Thanks, I'll remember that, should it ever happen again. What's the benefit for TWRP over CWM?
in Htc One i always had this problem.
I'm pretty sure you will never be able to mount SD
but its not a big problem since you can still sidepush the zip file.
and to be honest there is not much difference between TWRP and CWM . its a matter of preference.
On my Htc one i always used TWRP but on other android devices for some reason i sticked with CWM.
Ayman.y88 said:
in Htc One i always had this problem.
I'm pretty sure you will never be able to mount SD
but its not a big problem since you can still sidepush the zip file.
and to be honest there is not much difference between TWRP and CWM . its a matter of preference.
On my Htc one i always used TWRP but on other android devices for some reason i sticked with CWM.
Click to expand...
Click to collapse
Unfortunately, I was not able to sideload the image, the transfer went well, the phone said "Installing update" but nothing happened!
sblar said:
Unfortunately, I was not able to sideload the image, the transfer went well, the phone said "Installing update" but nothing happened!
Click to expand...
Click to collapse
i guess u will have to install back the official ruu and after it add the rom u want to flash on the sd card and flash it ...
let me know if it works with you.
GL
Ayman.y88 said:
i guess u will have to install back the official ruu and after it add the rom u want to flash on the sd card and flash it ...
let me know if it works with you.
GL
Click to expand...
Click to collapse
Post 2 implies op was able to flash the zip successfully after wiping /data.
Correct, and I could probably also have sideloaded after wiping /data...
Hallo together,
I seem to have done something wrong while trying to flash the rom "RazRi_JB_X-2014-Jul-16".
Here is what i did:
- Unlocked to bootloader using official Motorola homepage
- Flashed CWM (non-touch) recovery using "Recovery Flasher by LeBobo v1.7", USB-Debugging was on
- Rebooted into bootloader and flashed "RAZRiRoot2" to prevent Stock-ROM from overwriting the recovery
- Tried to install the Custom ROM using CWM, but it fails to wipe cache (stuck on line "Formatting /cache")
Because it didn't work, i tried to reset everything as it was before to be able to try again - flashed stock-recovery using the Recovery Flasher by LeBobo, booted into bootloader and selected "Factory". The cell is now just showing the "Warning bootloader unlocked" warning and nothing else happens.
When i try to select the recovery in the bootloader menu, an image of a Android laying on its back with an opened hatch and a red warning symbol showing a "!" appears and nothing else happens.
I seem to have bricked my device, because i cant't really do anything now - is there any solution?
I read through different topics but could not find a real solution to this particular problem...
Thank you so much in advance for your help!
It's not bricked
At the moment u enter stock recovery with that android and red warning sy,bol, u need to press bot volume up + downp. Than it will enter stock recovery mode.
Those are the following things u can do to get custom rom,
1. Flash another recovery, cwm touch, cwm non-touch, twrp. They all work a little different.
2. Flash the custom rom and wipe everything, The wip can take some time. sometimes it will be seconds, sometimes it will take a couple of minutes. Every recovery behaves different, and every flash/wipe too.
3. enjoy
If u really want to go back to stock, flash your stock JB firmware by RSD-Lite.
Thank you very much for your answer. I restored the stock rom using RSD Lite and did a clean install of TWRP.
Then I did a Factory Reset and started to install the custom ROM.
The TWRP is now stuck at "Flashing File 1 of 1 /external_sd/RazRi_JB_X-2014-Jul-16.zip".
Is it normal that it takes more than five minutes or is something going wrong here? Is there something i forgot?
StarGeneral said:
Thank you very much for your answer. I restored the stock rom using RSD Lite and did a clean install of TWRP.
Then I did a Factory Reset and started to install the custom ROM.
The TWRP is now stuck at "Flashing File 1 of 1 /external_sd/RazRi_JB_X-2014-Jul-16.zip".
Is it normal that it takes more than five minutes or is something going wrong here? Is there something i forgot?
Click to expand...
Click to collapse
5 minutes is a bit too much. But that's the problem with this device. Every device behaves different and we haven't found out a solution too it.
At the moment i can't do much for you. I can only say try to wipe the partitions mannualy. Wipe system, data and cache. and mount system. And then try to install it. Maybe if that doesnt do the trick try again another recovery.
This from KTR-ROM
Code:
- Enter in TWRP or CWM
- Wipes required: data, system, cache y dalvik
*In CWM mount system must format before (Mount and storage -> Mount system)
Thanks again - that was it.
For some reason, TWRP did not automatically wipe the system-partition. It had to be mounted + wiped manually.
Not the custom ROM is up and running well. Installation took 35 minutes for some reason though...
Thank you so much for your help!
StarGeneral said:
Thanks again - that was it.
For some reason, TWRP did not automatically wipe the system-partition. It had to be mounted + wiped manually.
Not the custom ROM is up and running well. Installation took 35 minutes for some reason though...
Thank you so much for your help!
Click to expand...
Click to collapse
nice, glad that it worked