Database Develop

Just update to stock 4.3 and rerooted

I was on 4.2 stock rooted SOFF and just went to 4.3 and easily rerooted.
Please note I was SOFF stock recovery
Updated to 4.3 then:
1. Create txt file named android-info.txt
Data in file 4 lines
modelid: PN0720000
cidnum: SPCS_001
mainver: 1.29.651.10
hbootpreupdate:3
2. Get recovery of your choice and rename it recovery.img
3. Zip files up into zip file name recovery.zip
4. Run the following fastboot commands
fastboot oem rebootRUU
fastboot flash zip recovery.zip
fastboot reboot
You now have a recovery of your choice on a LOCKED S-OFF system and can re-flash superuser.
Superuser for 4.3
http://download.clockworkmod.com/superuser/superuser.zip
Thank to Indirect!!!
****After all that I restored the stock sprint recovery using the same method.
ALL STOCK LOCKED with SOFF and root.

[GUIDE] Return to stock for Canadian HTC One Users

This guide is for Canadian HTC One Bell Rogers Telus users who need to go back to stock firmware for warranty after flashing custom recovery/rom. If you have installed Open EU, Google, Dev, ATT, or any other kind of RUU, see post #2.
Requirements:
1. Your HBOOT is 1.55.
2. You received OTA to JB 4.3 from Rogers Bell Telus
3. Your main version is 3.x.661.x, 3.x.666.x, 3.x.631.x,
4. Some working knowledge of ADB/Fastboot.
Steps to restore stock:
1. Download your respective nandroid backup from below:
Rogers Nandroid: Stock_JB_4.3_ROGER001_TWRP_3.22.631.1.zip - http://www.htc1guru.com/dld/m7-twrp-nandroid-backup-cid-roger001-3-22-631-1-zip/
Bell Nandroid: Stock_JB_4.3_BM___001_TWRP_3.23.666.1.zip - http://www.htc1guru.com/dld/m7-twrp-nandroid-backup-cid-bm___001-3-23-666-1-zip/
Telus Nandroid: Stock_JB_4.3_TELUS001_TWRP_3.22.661.1.zip - http://goo.gl/sYoqei
Telus RUU ZIP: http://www.htc1guru.com/dld/ruu-zip...157-04_release_336571_signed_2_decrypted-zip/
Run fastboot oem rebootRUU.
Then, flash the RUU with the command fastboot flash zip filename
Click to expand...
Click to collapse
2. Download latest TWRP from: http://techerrata.com/browse/twrp2/m7
3. Reboot your device in fastboot and flash TWRP recovery. I used 2.6.3.0.
4. Reboot into recovery and do a backup of what you have working now (very important)
5. Boot back into OS
6. Unzip the nandroid backup folder and copy it to your \\SDCARD\TWRP\BACKUPS\######\somefolder\
7. Reboot back into TWRP, and restore the nandroid file
8. Reboot, your phone should be booting into your carrier firmware
9. Root
10. S-Off: Rumrunner thread, link: http://forum.xda-developers.com/showthread.php?t=2488772
11. Verify all is WORKING OK, then flash stock recovery, Link: http://goo.gl/2Kntxz
12. Remove *Tempered* from boot thread, link: http://forum.xda-developers.com/showthread.php?t=2477792
13. Unroot from SuperSU app.
14. S-On if you must, highly NOT suggested. command: fastboot oem writesecureflag 3
15. All should be good now.
Click to expand...
Click to collapse

** I am working from theory, and NOT actual experience with this **
Guide for HBOOT 1.44 (4.1.2) & those on DEV/GPE/ATT/INTL RUU based firmwares
Bell: 1.29.666.5 - http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-bm___001-1-29-666-5-zip/
Rogers: 1.29.631.4 - http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-roger001-1-29-631-4-2013-06-03-zip/
Telus: 1.29.661.5 - http://www.htc1guru.com/dld/m7-twrp-nandroid-backup-cid-telus001-1-29-661-5-rar/
Stock Recovery for 1.44 HBOOT: http://goo.gl/Yzkwtl
1.44 HBOOT (S-Off required): http://d-h.st/qfc
Assumptions:
1. You have S-Off
2. You have 1.44 HBOOT
3. You know how to use fastboot/adb commands.
Steps to revert to 4.1.2 HTC One:
1. Install earliest possible RUU for Dev edition.. 1.29.1540.3 http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb_50_brightstarus_wwe_1-29-1540-3-zip/
Make sure your CID is 11111111 and MID is PN0712000.
1a. If it fails to install, install the 1.44 HBOOT from above: fastboot flash zip hboot.zip and then re-flash the DEV zip file as fastboot flash zip devruu.zip
2. Install recovery. CWM for Bell & Rogers, TWRP for Telus. Do a backup from custom recovery (mostly to generate a backup path to use in step 4)
3. Reboot back into OS
4. Unzip the nandroid backup folder and copy it to your \\SDCARD\TWRP\BACKUPS\######\somefolder\ or \\data\media\clockworkmod\ .... (I am hazy on the path detail for CWM) You may need to use ES File Explorer to move the folder around if cwm is using 0\clockworkmod folder.
5. Reboot into recovery, select restore, and restore the nandroid file.
6. You should be booting into the earliest HTC OS for Rogers, Bell, Telus. (Your fastboot getvar all will still say 1.29.1540.3, this will change after an OTA)
7. Change your CID to Rogers001, BM___001, or TELUS001 accordingly in fastboot.
8. If you are rooted, either unroot supersu, or flash this file unroot-flashable.zip from recovery: http://goo.gl/JBmJVQ
9. Install stock recovery from fastboot http://goo.gl/Yzkwtl. Do a factory reset to verify that recovery has installed. You should NOT see CWM or TWRP during reset process.
10. Reboot back into OS and check for OTA, your OTA should come through and install itself, your fastboot getvar all should now result in the correct 1.29.x.17 main version.
11. At this time, you are stock, with S-Off and unlocked bootloader. If you want to continue further to lock bootloader and S-ON, start from step 9 in post 1.
Click to expand...
Click to collapse

Miscellaneous tips and tricks:
If you can NOT mount /sdcard in recovery
Download your Non-Canadian recoveries from: http://d-h.st/users/guich/?fld_id=29380#files or http://forum.xda-developers.com/showthread.php?t=2545227
Download Canadian 1.55 HBOOT recovery: http://goo.gl/2Kntxz
Make sure you're in the bootloader go into fastboot and make sure the downloaded image is in the same folder as your fastboot.
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot-bootloader
Go into bootloader and then choose Factory Reset - let that finish running <<< Important!
Phone will go out and start bootlooping. Now power off and go back to bootloader mode:
Go into fastboot
fastboot flash recovery <custom recovery>.img
fastboot erase cache
fastboot reboot-bootloader
Now you can go into custom recovery and you should be good to go now.
Click to expand...
Click to collapse
Radio/Modem files
Radio for Bell/Rogers/Telus for 3.x.x.x firmware (hboot 1.55): http://forum.xda-developers.com/showpost.php?p=46513020&postcount=12 - Tested
Radio fro Bell/Rogers/Telus for 1.x.x.x firmware (hboot 1.44): http://forum.xda-developers.com/showpost.php?p=45360195&postcount=5 - Not Tested
Click to expand...
Click to collapse

Thanks for the help! was looking for the nandroid back ups. will check back when you have the 1.44 written up. Is there a way i can upgrade my hboot to 1.55 from 1.44 in order to use the nandroid in post 1. If load the 1.29 nandroid my touch screen wont work and i need to go buy a otg cable in order to accept whats on the screen.

Thank You so much!!
I've been searching for the ROGERS RUU or Nandroid all day, new to Android so I didn't think of making a "nandroid" backup before flashing ROMs, but you saved me mate
Cheers!

Rogers htc one stuck on fastboot screen
Rogers htc one stuck on fastboot screen.

What have you tried so far? How did it get stuck?

Stuck on fastboot
SaHiLzZ said:
What have you tried so far? How did it get stuck?
Click to expand...
Click to collapse
Before following your instructions today, i relocked the bootloader and tried few exe and zip ruu yesterday. After that its stuck on fastboot screen.

What's the output of fastboot getvar all ?

SaHiLzZ said:
What's the output of fastboot getvar all ?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.22.631.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3983mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-fe1214a4f2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.080s

1. Unlock boot loader and download rogers nandroid and unzip.
2. Flash TWRP
3. Boot into TWRP
4. Run a fake backup. If it fails.. Got a SD card issue, let me know so I can guide you through it.
5. On computer type adb devices. Should come back with device in recovery mode
6. AD

6. Adb shell, then CD SDCARD, CD TWRP, CD BACKUP, note the path
7. Adb push rogersback \SDCARD\TWRP\BACKUPS\######\somefolder

Rogers Htc One stock rom
Thanks Sahilzz, I fixed it. Everything is back to normal. I was able to bring it back to stock rom.
Thanks a lot.

how do I install CWM I have twrp recovery. When I tried to install it. It said on CMD, but the phone keeps rebooting

Retry. Sometimes it takes a few tries for recovery to stick. Are you following post #2?
What's your fastboot getvar all output?

HELP! Blue screen, can't get past bootloader
I tried installing an OTA update that came through and now I am stuck on a blue screen. I can get to bootloader and fastboot but nothing I do can get past that. I want to return to stock or even just flash another ROM but I can't as my computer won't recognize the phone either. My HTC One is unlocked, S-On, TWRP recovery and HBOOT 1.44 . I've tried doing a fastboot getvar all but as I said, the computer won't recognize the phone so command prompt just sits there.

Move to a windows 7 machine and retry. Can't help if fastboot/adb doesn't work

SaHiLzZ said:
This guide is for Canadian HTC One Bell Rogers Telus users who need to go back to stock firmware for warranty after flashing custom recovery/rom. If you have installed Open EU, Google, Dev, ATT, or any other kind of RUU, see post #2.
Requirements:
1. Your HBOOT is 1.55.
2. You received OTA to JB 4.3 from Rogers Bell Telus
3. Your main version is 3.x.661.x, 3.x.666.x, 3.x.631.x,
4. Some working knowledge of ADB/Fastboot.
Steps to restore stock:
1. Download your respective nandroid backup from below:
Rogers Nandroid: Stock_JB_4.3_ROGER001_TWRP_3.22.631.1.zip - http://goo.gl/7702AM
Bell Nandroid: Stock_JB_4.3_BM___001_TWRP_3.23.666.1.zip - http://goo.gl/hw7Bj7
Telus Nandroid: Missing..
2. Download latest TWRP from: http://techerrata.com/browse/twrp2/m7
3. Reboot your device in fastboot and flash TWRP recovery. I used 2.6.3.0.
4. Reboot into recovery and do a backup of what you have working now (very important)
5. Boot back into OS
6. Unzip the nandroid backup folder and copy it to your \\SDCARD\TWRP\BACKUPS\######\somefolder\
7. Reboot back into TWRP, and restore the nandroid file
8. Reboot, your phone should be booting into your carrier firmware
9. Root
10. S-Off: Rumrunner thread, link: http://forum.xda-developers.com/showthread.php?t=2488772
11. Remove *Tempered* from boot thread, link: http://www.htc1guru.com/guides/guru-bootloader-reset/ OR http://forum.xda-developers.com/showthread.php?t=2477792
12. Verify all is WORKING OK, then flash stock recovery, Link: http://goo.gl/2Kntxz
13. S-On if you must, highly NOT suggested. command: fastboot oem writesecureflag 3
14. All should be good now.
Click to expand...
Click to collapse
Noob here
Step 9 says root.....what do you mean bu it?
Thanks

Install custom recovery, and root...

SaHiLzZ said:
Install custom recovery, and root...
Click to expand...
Click to collapse
Thanks......when should i relock bootloader?

[Solved] Bricked my One?

Hello,
i'm reading here for some weeks and this forum helped me much so far. Now I made a bad mistake while flashing the latest firmware on my One and it seems that I have bricked it.
What have I done?
I used ARHD 5.1 GE on my One with an older firmware. Before that I was using ARHD 4.1. Data of my phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4260mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I changed to SuperCID, before that I had VODAP102. Bootloader is relocked.
After flashing latest firmware, my sdcard got wiped. So I have no backups or any other data on my phone. The phone stops booting after the white screen with the "HTC" logo and shows a turquoise color with little stripes and nothing happens.
I tried to flash another firmware, as you can see in the phone's details. That worked, but changed nothing. I can't install a rom, because adb doesn't find my device, but fastboot does. I tried several HTC-drivers and cables and USB-slots. Nothing.
I read several How-To's but I got stuck with this. Even tried to install the 1.28.401.7 RUU, but that stops with Error 155. After first time that error occured I relocked my bootloader, but that didn't help. I can't push files to the phone, because adb doesn't work.
Now only one thing left: Asking you for help. I'm somewhat frustrated.
Peko

pekomane said:
Hello,
i'm reading here for some weeks and this forum helped me much so far. Now I made a bad mistake while flashing the latest firmware on my One and it seems that I have bricked it.
What have I done?
I used ARHD 5.1 GE on my One with an older firmware. Before that I was using ARHD 4.1. Data of my phone:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
I changed to SuperCID, before that I had VODAP102. Bootloader is relocked.
After flashing latest firmware, my sdcard got wiped. So I have no backups or any other data on my phone. The phone stops booting after the white screen with the "HTC" logo and shows a turquoise color with little stripes and nothing happens.
I tried to flash another firmware, as you can see in the phone's details. That worked, but changed nothing. I can't install a rom, because adb doesn't find my device, but fastboot does. I tried several HTC-drivers and cables and USB-slots. Nothing.
I read several How-To's but I got stuck with this. Even tried to install the 1.28.401.7 RUU, but that stops with Error 155. After first time that error occured I relocked my bootloader, but that didn't help. I can't push files to the phone, because adb doesn't work.
Now only one thing left: Asking you for help. I'm somewhat frustrated.
Peko
Click to expand...
Click to collapse
1- remove IMEI and s/n
2- install latest TWRP 2.6.3.3 (needed for 4.4 roms)
You need TWRP 2.6.3.3 (or later) for 4.4 roms, also if you are using a GPE rom, then you need to be s-off.
Download from here: http://techerrata.com/browse/twrp2/m7 don't use a download manager, it will fail; download normally and check MD5 to make sure file is not corrupt,
go to bootloader/FASTBOOT USB, and flash it:
fastboot flash openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
3- confirm adb working in TWRP now, and unlock using: http://forum.xda-developers.com/showthread.php?t=2475914 or "revone -u"
(you don't need to relock if you're s-off)
4- push, sideload, or OTG a ROM and install
5- error 155 occurs due to hboot 1.55+, you'll need to downgrade to 1.44 to run RUU

nkk71 said:
1- remove IMEI and s/n
2- install latest TWRP 2.6.3.3 (needed for 4.4 roms)
You need TWRP 2.6.3.3 (or later) for 4.4 roms, also if you are using a GPE rom, then you need to be s-off.
Download from here: http://techerrata.com/browse/twrp2/m7 don't use a download manager, it will fail; download normally and check MD5 to make sure file is not corrupt,
go to bootloader/FASTBOOT USB, and flash it:
fastboot flash openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
3- confirm adb working in TWRP now, and unlock using: http://forum.xda-developers.com/showthread.php?t=2475914 or "revone -u"
(you don't need to relock if you're s-off)
4- push, sideload, or OTG a ROM and install
5- error 155 occurs due to hboot 1.55+, you'll need to downgrade to 1.44 to run RUU
Click to expand...
Click to collapse
Step 1 already edited, right after posting...
Thanks for now, I have to try that when I am at home. I will post here, if it worked or not.

pekomane said:
Step 1 already edited, right after posting...
Thanks for now, I have to try that when I am at home. I will post here, if it worked or not.
Click to expand...
Click to collapse
no problem, IF you're gonna end up using RUU, you need to downgrade to this hboot: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
then go to bootloader/FASTBOOT USB:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <- just in case the first one says "failed flush again"
fastboot reboot-bootloader
and run the RUU, should work fine.

nkk71 said:
no problem, IF you're gonna end up using RUU, you need to downgrade to this hboot: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
then go to bootloader/FASTBOOT USB:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <- just in case the first one says "failed flush again"
fastboot reboot-bootloader
and run the RUU, should work fine.
Click to expand...
Click to collapse
Thanks for that, but using RUU was only one way I thought of to get my phone working again, because adb push and sideload don't work. If the way you mentioned in your first post works, then I will be absolutely fine without using RUU. Otherwise I will try the RUU option.

It worked! Thanks for your help! :good:

pekomane said:
It worked! Thanks for your help! :good:
Click to expand...
Click to collapse
Cool, if everything OK now, could you edit main thread title to include [SOLVED], Danke

Done.
By the way, it was the first option you posted that did the trick.

pekomane said:
Done.
By the way, it was the first option you posted that did the trick.
Click to expand...
Click to collapse
Sent from my HTC One using Tapatalk

Hello nkk7
S-OFF by rumrunners
bootloader 1.55
Version main 3.62.401.1
Cid HTC001
Mid pn0710000
I have tu use ruu to go back to stock can u please give me step by step guide in sequence pls
Pls
And there is no ruu for 3.62.401.1
Thus I will have downgrade that's why I am confused
Pls give me step by step info

shurahbil said:
Hello nkk7
S-OFF by rumrunners
bootloader 1.55
Version main 3.62.401.1
Cid HTC001
Mid pn0710000
I have tu use ruu to go back to stock can u please give me step by step guide in sequence pls
Pls
And there is no ruu for 3.62.401.1
Thus I will have downgrade that's why I am confused
Pls give me step by step info
Click to expand...
Click to collapse
follow my guide in my signature, there is a RUU.EXE available for CID: HTC__001 and MID: PN0710000 (so you can follow the RUU.EXE procedure)
in my opinion do NOT GO S-ON!!

nkk71 said:
follow my guide in my signature, there is a RUU.EXE available for CID: HTC__001 and MID: PN0710000 (so you can follow the RUU.EXE procedure)
in my opinion do NOT GO S-ON!!
Click to expand...
Click to collapse
Done ok ty
Why do not go s-on

Because you will close an avenue of troubleshooting if you are S-ON..

[SOLVED] HTC One Bootloader Unlock

Hey, i have tried to unlock the bootloader a few times but there appears no disclaimer. I have used the instruction from several websites.
I type in the CMD the command: fastboot flash unlocktoken Unlock_code.bin and after one second he has finished that but it happens nothing on the phone.
Can anybody help me?

steini793 said:
Hey, i have tried to unlock the bootloader a few times but there appears no disclaimer. I have used the instruction from several websites.
I type in the CMD the command: fastboot flash unlocktoken Unlock_code.bin and after one second he has finished that but it happens nothing on the phone.
Can anybody help me?
Click to expand...
Click to collapse
please post a "fastboot getvar all" (excluding IMEI and s/n) and a screenshot of bootloader

Ok they are in the attachment.

steini793 said:
Ok they are in the attachment.
Click to expand...
Click to collapse
1- GPE -> have you tried "fastboot oem unlock"
2- what kind of recovery do you have?

I have tried it now but i get an error and nothing else happens.
i dont know which kind i cant open it. When i klick on recovery there comes "no command".
EDIT: Nothing works...
I've downgraded my hboot to version 1.44 and then i tried revone but it also dont work.

steini793 said:
I have tried it now but i get an error and nothing else happens.
i dont know which kind i cant open it. When i klick on recovery there comes "no command".
EDIT: Nothing works...
I've downgraded my hboot to version 1.44 and then i tried revone but it also dont work.
Click to expand...
Click to collapse
you have stock recovery and your phone is not responding to fastboot devices ... are you using windows 8.1 ?
From stock recovery you push power + vol+ to see the menu
this is what you should see
Unlock your bootloader, but do not flash your custom recovery yet.
Reboot.
Your device will force-boot into stock recovery, wipe data and cache, then reboot again.
Let the device boot all the way to the welcome screen.
Reboot back into fastboot mode.
Flash the custom recovery and fastboot erase cache.
Reboot.
Click to expand...
Click to collapse

steini793 said:
I have tried it now but i get an error and nothing else happens.
i dont know which kind i cant open it. When i klick on recovery there comes "no command".
EDIT: Nothing works...
I've downgraded my hboot to version 1.44 and then i tried revone but it also dont work.
Click to expand...
Click to collapse
since you're locked, you won't be able to flash anything normally, but you can flash firmware.zip in RUU mode since you are S-Off, so here's a thought:
use the TWRP recovery "firmware" by @cschmitt http://forum.xda-developers.com/showpost.php?p=49635087&postcount=9
you flash that in ruu mode, so
fastboot oem rebootRUU
fastboot flash zip firmware_twrp.zip <- make sure it says Successful
fastboot reboot-bootloader
this it what the output will look like: http://forum.xda-developers.com/showpost.php?p=49666237&postcount=13
then enter recovery, and use adb commands (in TWRP) to unlock bootloader: http://forum.xda-developers.com/showthread.php?t=2475914

@nkk71
it doesnt work it comes custom id check fail
Can i change the cid number in the android.txt file in the zip?

steini793 said:
@nkk71
it doesnt work it comes custom id check fail
Click to expand...
Click to collapse
i just checked and GOOGL001 is in there:
Code:
modelid: PN0710000
modelid: PN0711000
modelid: PN0712000
modelid: PN0713000
modelid: PN0714000
modelid: PN071****
cidnum: 11111111
cidnum: T-MOB010
cidnum: CWS__001
cidnum: BS_US001
cidnum: GOOGL001
just temporarily change to SuperCID:
fastboot oem writecid 11111111" <- eight ones
fastboot reboot-bootloader
and try again
PS: copy/paste is usually easier to read than screenshots (either set Command Prompt properties to QuickEdit), or check the attachment

and edroyer
Ok thanks it works, i have now installed the zip and i am in the Recovery
but how can i use the adb commands in the TWRP?

steini793 said:
Ok thanks it works, i have now installed the zip and i am in the Recovery
but how can i use the adb commands in the TWRP?
Click to expand...
Click to collapse
adb works just fine in recovery, type adb devices
and it should come back with your serial number followed by "recovery" indicating you are in recovery
then use the adb commands to UNLOCK

Yes the bootloader is unlocked now, thanks so much for your help

steini793 said:
Yes the bootloader is unlocked now, thanks so much for your help
Click to expand...
Click to collapse
no problem, feel free to hit the thanks button, and also edit the main thread title to include [SOLVED] thanks.
remember to stay S-Off!!

[Q] Some one accidently wipe all my phone date

When i'm at recovery screen. Some one accidently wipe all my phone data, which i don't have a backup. Now my phone can't start because there are no data on the phone, even system. How can i recover them. I can still access to fastboot and recover screen but i can't copy anything into my phone.

hoang193121 said:
When i'm at recovery screen. Some one accidently wipe all my phone data, which i don't have a backup. Now my phone can't start because there are no data on the phone, even system. How can i recover them. I can still access to fastboot and recover screen but i can't copy anything into my phone.
Click to expand...
Click to collapse
Check this thread, it might help you
http://forum.xda-developers.com/showthread.php?t=2318497

Harish_Kumar said:
Check this thread, it might help you
http://forum.xda-developers.com/showthread.php?t=2318497
Click to expand...
Click to collapse
It's quite helpful but i don't have any back up of my phone data.. Where can i download one!

hoang193121 said:
It's quite helpful but i don't have any back up of my phone data.. Where can i download one!
Click to expand...
Click to collapse
can you post your fastboot getvar all please, remove your seial number and imei before posting.

Here it is
Seanie280672 said:
can you post your fastboot getvar all please, remove your seial number and imei before posting.
Click to expand...
Click to collapse
version: 0.5
version-bootloader: 1.56.0000
version-baseband: 4A.25.3263.21
version-cpld: None
version-microp: None
version-main:
version-misc: PVT SHIP S-O
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: HTC__A07
battery-status: good
battery-voltage: 3726mV
partition-layout: Generic
security: on
build-mode: SHIP
boot-mode: FASTBOOT
commitno-bootloader: dirty-4dab9d12
hbootpreupdate: 11
gencheckpt: 0

put TWRP 2.6.3.3 recovery on your phone from here, flash it through fastboot.
http://techerrata.com/browse/twrp2/m7
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
once done, download the below file, enter recovery (main screen only) and push the file to your internal storage using adb, it will look like its doing nothing whilst its pushing, but will let you know when its done
http://www.htc1guru.com/dld/guru_reset_m7_3-62-401-1-zip/
Code:
adb push Guru_Reset_M7_3.62.401.1.zip /sdcard/
when its finished pushing over, select install, and select the file you just pushed from the list, swipe to being the install.
During the aroma installer, when prompted, select wipe data, also select install stock recovery and stock radio.
Stock ROM version for these types:
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016

I'll try
Seanie280672 said:
put TWRP 2.6.3.3 recovery on your phone from here, flash it through fastboot.
Code:
fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img
fastboot erase cache
fastboot reboot-bootloader
once done, download the below file, enter recovery (main screen only) and push the file to your internal storage using adb, it will look like its doing nothing whilst its pushing, but will let you know when its done
Code:
adb push Guru_Reset_M7_3.62.401.1.zip /sdcard/
when its finished pushing over, select install, and select the file you just pushed from the list, swipe to being the install.
During the aroma installer, when prompted, select wipe data, also select install stock recovery and stock radio.
Stock ROM version for these types:
modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Click to expand...
Click to collapse
Thanks dude.. still don't know will it work but thanks..

hoang193121 said:
Thanks dude.. still don't know will it work but thanks..
Click to expand...
Click to collapse
As long as your phone isn't faulty, it should work, its your rom for your phone, sometimes after it finishes installing, if the screen goes blank, just hold the power button until the lights on the bottom flash 10 to 15 times to reset the phone, the change of recovery confuses it.

Seanie280672 said:
As long as your phone isn't faulty, it should work, its your rom for your phone, sometimes after it finishes installing, if the screen goes blank, just hold the power button until the lights on the bottom flash 10 to 15 times to reset the phone, the change of recovery confuses it.
Click to expand...
Click to collapse
"Unable to open zip file". I used the v2.7.1.1

hoang193121 said:
"Unable to open zip file". I used the v2.7.1.1
Click to expand...
Click to collapse
Did you get that error when trying to install it or trying to push it ?
Check the size of the zip file with the size on the site that site has problems with the download s sometimes

!!!!!!!!
Seanie280672 said:
Did you get that error when trying to install it or trying to push it ?
Check the size of the zip file with the size on the site that site has problems with the download s sometimes
Click to expand...
Click to collapse
I have that problem when trying to install them. I'll download that file again and doover.

hoang193121 said:
I have that problem when trying to install them. I'll download that file again and doover.
Click to expand...
Click to collapse
Check the file size and the md5 of the download before pushing it to your sdcard
---------- Post added at 08:30 AM ---------- Previous post was at 07:53 AM ----------
I just saw your other thread, if you ha e a backup on your computer, the you will have to get a usb otg cable, copy the backup onto a memory stick and plug it into the cable, plug the other end into your phone and in recovery, select restore from usb otg

TKS so much
Seanie280672 said:
Check the file size and the md5 of the download before pushing it to your sdcard
---------- Post added at 08:30 AM ---------- Previous post was at 07:53 AM ----------
I just saw your other thread, if you ha e a backup on your computer, the you will have to get a usb otg cable, copy the backup onto a memory stick and plug it into the cable, plug the other end into your phone and in recovery, select restore from usb otg
Click to expand...
Click to collapse
Thanks you su much. My phoned now had been fixed.