Related
i flashed a new firmware to my ONE (DEV ED) i used this guide with this firmware
NOTE i was on 4.1.2 and wanted to install 4.2.2 ARHD, now after all this proccess my phone turns on and it shows only a black screen no htc logo nothing (well the HTC withe boot screen loads, but then nothing) :/ i wanted to push the rom through adb but i couldnt is my phone dead????
what can i do?
Code:
x.xx.1700.x - Google Edition (WWE)
modelid: PN0710000
modelid: PN0711000
modelid: PN0712000
modelid: PN0713000
modelid: PN0714000
modelid: PN071****
cidnum: 11111111
cidnum: T-MOB010
cidnum: CWS__001
cidnum: BS_US001
cidnum: GOOGL001
Download:
firmware.zip from 1.29.206.11
MD5:
F3CC4B4B0ACD18A4B35D0B3C9DF2AB20
Code:
How to flash?
(bootloader needs to be relocked)
Re-lock your bootloader (this will most probably wipe content of your device)
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
PLEASE HELP!!! any advise is great
eltoffer said:
i flashed a new firmware to my ONE (DEV ED) i used this guide with this firmware
NOTE i was on 4.1.2 and wanted to install 4.2.2 ARHD, now after all this proccess my phone turns on and it shows only a black screen no htc logo nothing (well the HTC withe boot screen loads, but then nothing) :/ i wanted to push the rom through adb but i couldnt is my phone dead????
what can i do?
Code:
x.xx.1700.x - Google Edition (WWE)
modelid: PN0710000
modelid: PN0711000
modelid: PN0712000
modelid: PN0713000
modelid: PN0714000
modelid: PN071****
cidnum: 11111111
cidnum: T-MOB010
cidnum: CWS__001
cidnum: BS_US001
cidnum: GOOGL001
Download:
firmware.zip from 1.29.206.11
MD5:
F3CC4B4B0ACD18A4B35D0B3C9DF2AB20
Code:
How to flash?
(bootloader needs to be relocked)
Re-lock your bootloader (this will most probably wipe content of your device)
Copy downloaded .zip to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
Re-name .zip file to firmware.zip
Open command prompt
Boot your device in fastboot mode (vol down + power ===> fastboot)
Connect device to the PC
In command prompt cd to fastboot.exe location
Make sure you have correct modeid and cidnum (type: fastboot getvar all)
Type: fastboot oem lock (if your device is not relocked yet)
Type: fastboot oem rebootRUU and wait for device to reboot
Type: fastboot flash zip firmware.zip and wait for process to complete
Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
Type: fastboot flash zip firmware.zip and wait for process to complete
Type: fastboot reboot
Unlock your bootloader and flash custom recovery if you are going to use custom ROM.
PLEASE HELP!!! any advise is great
Click to expand...
Click to collapse
First, not sure where you got your instructions, but you did not have to relock your bootloader to flash firmware, especially not S-off as your screenshot shows. Anyways, your pic shows you are unlocked, S-off, on 3.06 firmware. Have you flashed a custom recovery yet? That should be next, I recommend TWRP, look in the Original Development thread for the TWRP thread for the download and instructions. You want the 2.6.0.1 version for the m7. Flash recovery, then flash ARHD thru TWRP
dgtiii said:
First, not sure where you got your instructions, but you did not have to relock your bootloader to flash firmware, especially not S-off as your screenshot shows. Anyways, your pic shows you are unlocked, S-off, on 3.06 firmware. Have you flashed a custom recovery yet? That should be next, I recommend TWRP, look in the Original Development thread for the TWRP thread for the download and instructions. You want the 2.6.0.1 version for the m7. Flash recovery, then flash ARHD thru TWRP
Click to expand...
Click to collapse
both instructions and firmware where from MIKE (http://forum.xda-developers.com/showthread.php?t=2182823)
i already installed CR indeed it was CWM, if i use TWRP how can i push the rom to the phone :/?
eltoffer said:
both instructions and firmware where from MIKE (http://forum.xda-developers.com/showthread.php?t=2182823)
i already installed CR indeed it was CWM, if i use TWRP how can i push the rom to the phone :/?
Click to expand...
Click to collapse
Hmmm....I never had to relock to flash firmware..anyways.....I use TWRP, but CWM is close to same
Go here: http://forum.xda-developers.com/showthread.php?t=2325853&highlight=sideload and here http://forum.xda-developers.com/showthread.php?t=2318497 for ADB push/sideload
dgtiii said:
Hmmm....I never had to relock to flash firmware..anyways.....I use TWRP, but CWM is close to same
Go here: http://forum.xda-developers.com/showthread.php?t=2325853&highlight=sideload and here http://forum.xda-developers.com/showthread.php?t=2318497 for ADB push/sideload
Click to expand...
Click to collapse
thanks this is what i needed, i couldnt push my rom with CWM but i did with TWRP flahsed and ok
BIG THANKS
eltoffer said:
thanks this is what i needed, i couldnt push my rom with CWM but i did with TWRP flahsed and ok
BIG THANKS
Click to expand...
Click to collapse
Haha, that's awesome! Happy to help and glad it's back!
This guide is for Canadian HTC One Bell Rogers Telus users who need to go back to stock firmware for warranty after flashing custom recovery/rom. If you have installed Open EU, Google, Dev, ATT, or any other kind of RUU, see post #2.
Requirements:
1. Your HBOOT is 1.55.
2. You received OTA to JB 4.3 from Rogers Bell Telus
3. Your main version is 3.x.661.x, 3.x.666.x, 3.x.631.x,
4. Some working knowledge of ADB/Fastboot.
Steps to restore stock:
1. Download your respective nandroid backup from below:
Rogers Nandroid: Stock_JB_4.3_ROGER001_TWRP_3.22.631.1.zip - http://www.htc1guru.com/dld/m7-twrp-nandroid-backup-cid-roger001-3-22-631-1-zip/
Bell Nandroid: Stock_JB_4.3_BM___001_TWRP_3.23.666.1.zip - http://www.htc1guru.com/dld/m7-twrp-nandroid-backup-cid-bm___001-3-23-666-1-zip/
Telus Nandroid: Stock_JB_4.3_TELUS001_TWRP_3.22.661.1.zip - http://goo.gl/sYoqei
Telus RUU ZIP: http://www.htc1guru.com/dld/ruu-zip...157-04_release_336571_signed_2_decrypted-zip/
Run fastboot oem rebootRUU.
Then, flash the RUU with the command fastboot flash zip filename
Click to expand...
Click to collapse
2. Download latest TWRP from: http://techerrata.com/browse/twrp2/m7
3. Reboot your device in fastboot and flash TWRP recovery. I used 2.6.3.0.
4. Reboot into recovery and do a backup of what you have working now (very important)
5. Boot back into OS
6. Unzip the nandroid backup folder and copy it to your \\SDCARD\TWRP\BACKUPS\######\somefolder\
7. Reboot back into TWRP, and restore the nandroid file
8. Reboot, your phone should be booting into your carrier firmware
9. Root
10. S-Off: Rumrunner thread, link: http://forum.xda-developers.com/showthread.php?t=2488772
11. Verify all is WORKING OK, then flash stock recovery, Link: http://goo.gl/2Kntxz
12. Remove *Tempered* from boot thread, link: http://forum.xda-developers.com/showthread.php?t=2477792
13. Unroot from SuperSU app.
14. S-On if you must, highly NOT suggested. command: fastboot oem writesecureflag 3
15. All should be good now.
Click to expand...
Click to collapse
** I am working from theory, and NOT actual experience with this **
Guide for HBOOT 1.44 (4.1.2) & those on DEV/GPE/ATT/INTL RUU based firmwares
Bell: 1.29.666.5 - http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-bm___001-1-29-666-5-zip/
Rogers: 1.29.631.4 - http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-roger001-1-29-631-4-2013-06-03-zip/
Telus: 1.29.661.5 - http://www.htc1guru.com/dld/m7-twrp-nandroid-backup-cid-telus001-1-29-661-5-rar/
Stock Recovery for 1.44 HBOOT: http://goo.gl/Yzkwtl
1.44 HBOOT (S-Off required): http://d-h.st/qfc
Assumptions:
1. You have S-Off
2. You have 1.44 HBOOT
3. You know how to use fastboot/adb commands.
Steps to revert to 4.1.2 HTC One:
1. Install earliest possible RUU for Dev edition.. 1.29.1540.3 http://www.htc1guru.com/dld/ruu-zip-m7_ul_jb_50_brightstarus_wwe_1-29-1540-3-zip/
Make sure your CID is 11111111 and MID is PN0712000.
1a. If it fails to install, install the 1.44 HBOOT from above: fastboot flash zip hboot.zip and then re-flash the DEV zip file as fastboot flash zip devruu.zip
2. Install recovery. CWM for Bell & Rogers, TWRP for Telus. Do a backup from custom recovery (mostly to generate a backup path to use in step 4)
3. Reboot back into OS
4. Unzip the nandroid backup folder and copy it to your \\SDCARD\TWRP\BACKUPS\######\somefolder\ or \\data\media\clockworkmod\ .... (I am hazy on the path detail for CWM) You may need to use ES File Explorer to move the folder around if cwm is using 0\clockworkmod folder.
5. Reboot into recovery, select restore, and restore the nandroid file.
6. You should be booting into the earliest HTC OS for Rogers, Bell, Telus. (Your fastboot getvar all will still say 1.29.1540.3, this will change after an OTA)
7. Change your CID to Rogers001, BM___001, or TELUS001 accordingly in fastboot.
8. If you are rooted, either unroot supersu, or flash this file unroot-flashable.zip from recovery: http://goo.gl/JBmJVQ
9. Install stock recovery from fastboot http://goo.gl/Yzkwtl. Do a factory reset to verify that recovery has installed. You should NOT see CWM or TWRP during reset process.
10. Reboot back into OS and check for OTA, your OTA should come through and install itself, your fastboot getvar all should now result in the correct 1.29.x.17 main version.
11. At this time, you are stock, with S-Off and unlocked bootloader. If you want to continue further to lock bootloader and S-ON, start from step 9 in post 1.
Click to expand...
Click to collapse
Miscellaneous tips and tricks:
If you can NOT mount /sdcard in recovery
Download your Non-Canadian recoveries from: http://d-h.st/users/guich/?fld_id=29380#files or http://forum.xda-developers.com/showthread.php?t=2545227
Download Canadian 1.55 HBOOT recovery: http://goo.gl/2Kntxz
Make sure you're in the bootloader go into fastboot and make sure the downloaded image is in the same folder as your fastboot.
fastboot flash recovery recovery.img
fastboot erase cache
fastboot reboot-bootloader
Go into bootloader and then choose Factory Reset - let that finish running <<< Important!
Phone will go out and start bootlooping. Now power off and go back to bootloader mode:
Go into fastboot
fastboot flash recovery <custom recovery>.img
fastboot erase cache
fastboot reboot-bootloader
Now you can go into custom recovery and you should be good to go now.
Click to expand...
Click to collapse
Radio/Modem files
Radio for Bell/Rogers/Telus for 3.x.x.x firmware (hboot 1.55): http://forum.xda-developers.com/showpost.php?p=46513020&postcount=12 - Tested
Radio fro Bell/Rogers/Telus for 1.x.x.x firmware (hboot 1.44): http://forum.xda-developers.com/showpost.php?p=45360195&postcount=5 - Not Tested
Click to expand...
Click to collapse
Thanks for the help! was looking for the nandroid back ups. will check back when you have the 1.44 written up. Is there a way i can upgrade my hboot to 1.55 from 1.44 in order to use the nandroid in post 1. If load the 1.29 nandroid my touch screen wont work and i need to go buy a otg cable in order to accept whats on the screen.
Thank You so much!!
I've been searching for the ROGERS RUU or Nandroid all day, new to Android so I didn't think of making a "nandroid" backup before flashing ROMs, but you saved me mate
Cheers!
Rogers htc one stuck on fastboot screen
Rogers htc one stuck on fastboot screen.
What have you tried so far? How did it get stuck?
Stuck on fastboot
SaHiLzZ said:
What have you tried so far? How did it get stuck?
Click to expand...
Click to collapse
Before following your instructions today, i relocked the bootloader and tried few exe and zip ruu yesterday. After that its stuck on fastboot screen.
What's the output of fastboot getvar all ?
SaHiLzZ said:
What's the output of fastboot getvar all ?
Click to expand...
Click to collapse
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.22.631.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3983mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-fe1214a4f2
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.080s
1. Unlock boot loader and download rogers nandroid and unzip.
2. Flash TWRP
3. Boot into TWRP
4. Run a fake backup. If it fails.. Got a SD card issue, let me know so I can guide you through it.
5. On computer type adb devices. Should come back with device in recovery mode
6. AD
6. Adb shell, then CD SDCARD, CD TWRP, CD BACKUP, note the path
7. Adb push rogersback \SDCARD\TWRP\BACKUPS\######\somefolder
Rogers Htc One stock rom
Thanks Sahilzz, I fixed it. Everything is back to normal. I was able to bring it back to stock rom.
Thanks a lot.
how do I install CWM I have twrp recovery. When I tried to install it. It said on CMD, but the phone keeps rebooting
Retry. Sometimes it takes a few tries for recovery to stick. Are you following post #2?
What's your fastboot getvar all output?
HELP! Blue screen, can't get past bootloader
I tried installing an OTA update that came through and now I am stuck on a blue screen. I can get to bootloader and fastboot but nothing I do can get past that. I want to return to stock or even just flash another ROM but I can't as my computer won't recognize the phone either. My HTC One is unlocked, S-On, TWRP recovery and HBOOT 1.44 . I've tried doing a fastboot getvar all but as I said, the computer won't recognize the phone so command prompt just sits there.
Move to a windows 7 machine and retry. Can't help if fastboot/adb doesn't work
SaHiLzZ said:
This guide is for Canadian HTC One Bell Rogers Telus users who need to go back to stock firmware for warranty after flashing custom recovery/rom. If you have installed Open EU, Google, Dev, ATT, or any other kind of RUU, see post #2.
Requirements:
1. Your HBOOT is 1.55.
2. You received OTA to JB 4.3 from Rogers Bell Telus
3. Your main version is 3.x.661.x, 3.x.666.x, 3.x.631.x,
4. Some working knowledge of ADB/Fastboot.
Steps to restore stock:
1. Download your respective nandroid backup from below:
Rogers Nandroid: Stock_JB_4.3_ROGER001_TWRP_3.22.631.1.zip - http://goo.gl/7702AM
Bell Nandroid: Stock_JB_4.3_BM___001_TWRP_3.23.666.1.zip - http://goo.gl/hw7Bj7
Telus Nandroid: Missing..
2. Download latest TWRP from: http://techerrata.com/browse/twrp2/m7
3. Reboot your device in fastboot and flash TWRP recovery. I used 2.6.3.0.
4. Reboot into recovery and do a backup of what you have working now (very important)
5. Boot back into OS
6. Unzip the nandroid backup folder and copy it to your \\SDCARD\TWRP\BACKUPS\######\somefolder\
7. Reboot back into TWRP, and restore the nandroid file
8. Reboot, your phone should be booting into your carrier firmware
9. Root
10. S-Off: Rumrunner thread, link: http://forum.xda-developers.com/showthread.php?t=2488772
11. Remove *Tempered* from boot thread, link: http://www.htc1guru.com/guides/guru-bootloader-reset/ OR http://forum.xda-developers.com/showthread.php?t=2477792
12. Verify all is WORKING OK, then flash stock recovery, Link: http://goo.gl/2Kntxz
13. S-On if you must, highly NOT suggested. command: fastboot oem writesecureflag 3
14. All should be good now.
Click to expand...
Click to collapse
Noob here
Step 9 says root.....what do you mean bu it?
Thanks
Install custom recovery, and root...
SaHiLzZ said:
Install custom recovery, and root...
Click to expand...
Click to collapse
Thanks......when should i relock bootloader?
Hi. I seek for guide on how to backup my HTC One stock firmware.zip and stock recovery.img
I have two HTC One phone:-
Phone A - unroot, KitKat stock ROM
- S-ON
- Locked
- Firmware: 4.20.707.6
- Hboot 1.56
- CID: HTC__044
- MID: PN0710000
Phone B - rooted, KitKat stock ROM
- S-Off
- Unlocked
- Firmware: ***
- Hboot 1.56
- CID: HTC__044
- MID: PN0710000
***Phone B has messed up firmware. Software firmware showing version 4.20.707.6 while running "getvar all" showing firmware 2.24.707.1.
I'm unable to find the KitKat stock firmware and stock recovery for this phone model.
I'm planning to return Phone B to unroot stock ROM state.
My questions:-
1) How to backup firmware.zip from Phone A to flash it into Phone B?
2) How to backup recovery.img from Phone A to flash it into Phone B?
3) Is stock recovery.img universal? Can i just get stock recovery.img for KitKat from any CID/MID version and flash it to Phone B to return it to stock ROM state?
Appreciate if someone could answer this. TQ.
mi
padey88 said:
Hi. I seek for guide on how to backup my HTC One stock firmware.zip and stock recovery.img
I have two HTC One phone:-
Phone A - unroot, KitKat stock ROM
- S-ON
- Locked
- Firmware: 4.20.707.6
- Hboot 1.56
- CID: HTC__044
- MID: PN0710000
Phone B - rooted, KitKat stock ROM
- S-Off
- Unlocked
- Firmware: ***
- Hboot 1.56
- CID: HTC__044
- MID: PN0710000
***Phone B has messed up firmware. Software firmware showing version 4.20.707.6 while running "getvar all" showing firmware 2.24.707.1.
I'm unable to find the KitKat stock firmware and stock recovery for this phone model.
I'm planning to return Phone B to unroot stock ROM state.
My questions:-
1) How to backup firmware.zip from Phone A to flash it into Phone B?
2) How to backup recovery.img from Phone A to flash it into Phone B?
3) Is stock recovery.img universal? Can i just get stock recovery.img for KitKat from any CID/MID version and flash it to Phone B to return it to stock ROM state?
Appreciate if someone could answer this. TQ.
Click to expand...
Click to collapse
I think a guru reset will work for your phone 2.
http://www.htc1guru.com/downloads/stock-rom-downloads/
Iwould find the newest one available for your cid and model id, since that phone is s-off you can downgrade firmware. Leave it s-off
mb_guy, appreciate your response.
Yes, Guru Reset M7 2.24.707.1 will do but i need to manual update to 3.63.707.3 then manual update to 4.20.707.6.
I just wonder how someone shared the stock firmware.zip and stock recovery.img online and what method they used to backup those files.
Now i have a new question:-
I've download OTA_4.20.707.6-3.63.707.3.zip files and found there's firmware.zip (4.20.707.6) inside.
Also there's recovery.img inside firmware.zip.
Can I used this firmware.zip and recovery.img to flash to Phone B to revert to stock ROM, Firmware & Recovery?
padey88 said:
mb_guy, appreciate your response.
Yes, Guru Reset M7 2.24.707.1 will do but i need to manual update to 3.63.707.3 then manual update to 4.20.707.6.
I just wonder how someone shared the stock firmware.zip and stock recovery.img online and what method they used to backup those files.
Now i have a new question:-
I've download OTA_4.20.707.6-3.63.707.3.zip files and found there's firmware.zip (4.20.707.6) inside.
Also there's recovery.img inside firmware.zip.
Can I used this firmware.zip and recovery.img to flash to Phone B to revert to stock ROM, Firmware & Recovery?
Click to expand...
Click to collapse
I think the firmware and recovery may flash, but you will have no ROM
mb_guy said:
I think the firmware and recovery may flash, but you will have no ROM
Click to expand...
Click to collapse
I have twrp stock rom backup. Just need the correct firmware and recovery img. I'll try and see if it works.
I'm new to flash and RUU 's
I'm a little confused, even reading guides .
I would leave my htc one as stock and make updates over the air .
I value help for this.
Currently my OS is ViperOne6.2.1 and my recovery is TRWP 2.6.3.3
--------------
UNLOCKED
S -OFF
--------------
> fastboot getvar all
( bootloader ) version: 0.5
( bootloader ) version- bootloader : 1.56.0000
( bootloader ) version- baseband : 4A.23.3263.28
( bootloader ) version- cpld : None
( bootloader ) version- microp : None
( bootloader ) version- main: 4.20.707.7
( bootloader ) version- misc : PVT SHIP S -OFF
( bootloader ) SerialNo : xxxxxxxxxxxxx
( bootloader ) imei : xxxxxxxxxxxxxx
( bootloader ) meid : 00000000000000
( bootloader ) product : m7_u
( bootloader ) platform: HBOOT - 8064
( bootloader ) modelid : PN0711000
( bootloader ) cidnum : HTC__044
( bootloader ) battery- status : good
( bootloader ) battery- voltage : 3790mV
( bootloader ) partition - layout : Generic
( bootloader ) security : off
( bootloader ) build -mode : SHIP
( bootloader ) boot -mode: fastboot
( bootloader ) commitno - bootloader : dirty - 59adc32b
( bootloader ) hbootpreupdate : 11
( bootloader ) gencheckpt : 0
I downloaded the
"RUU Zip M7_U_JB_50_hTC_Asia_WWE_1.29.707.4_R_Radio_4A.14.3250.13_10.33.1150.01_release_312087_signed_2_4_decrypted.zip"
and
"Guru_Reset_M7_3.63.707.4.zip"
but not sure if that's correct.
And now , what are the specific steps for my case ?
I really appreciate any help
Thank you!
Site is back up now, look for your rom, you want to look for ?.??.707.?
you will need to look for stock rom guru reset roms, yours is in this list, make sure MID and CID etc match first, also check the file size, although the site is working, im still having problems downloading a file from the site, it says its finished and should be 780mb but is only downloading 45mb
http://www.htc1guru.com/downloads/stock-rom-downloads/
The details are:
Guru Reset M7 3.63.707.4
File Size: 1.1 GiB - Downloads: 27498
MD5: 6aba67e56889124c4ab5188bba15a569
Comments: Stock Asia/India (World Wide English) ROM 3.63.707.4 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.
Future OTA Updates will work when available.
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038
Copy the file to your phone, easiest way is to rename it to rom.zip, and then flash it in recovery as you would do with any other rom, if you want your phone to be completely stock then select flash radio and recovery in the installer.
Seanie280672 said:
Site is back up now, look for your rom, you want to look for ?.??.707.?
you will need to look for stock rom guru reset roms, yours is in this list, make sure MID and CID etc match first, also check the file size, although the site is working, im still having problems downloading a file from the site, it says its finished and should be 780mb but is only downloading 45mb
http://www.htc1guru.com/downloads/stock-rom-downloads/
The details are:
Guru Reset M7 3.63.707.4
File Size: 1.1 GiB - Downloads: 27498
MD5: 6aba67e56889124c4ab5188bba15a569
Comments: Stock Asia/India (World Wide English) ROM 3.63.707.4 with graphical aroma installer. Includes the ability to flash the Stock Recovery and also Stock Radio.
Future OTA Updates will work when available.
modelid: PN0711000
modelid: PN0714000
cidnum: HTC__044
cidnum: HTC__038
Copy the file to your phone, easiest way is to rename it to rom.zip, and then flash it in recovery as you would do with any other rom, if you want your phone to be completely stock then select flash radio and recovery in the installer.
Click to expand...
Click to collapse
Good afternoon, Seannie!
I did exactly as mandated by the rules.
The phone was relocked and as "Not Tampered". Without the superuser.
When I tried to update it over the air, accused the phone that I'm using a modified version and can not update the system. = [
andrekerplunk said:
Good afternoon, Seannie!
I did exactly as mandated by the rules.
The phone was relocked and as "Not Tampered". Without the superuser.
When I tried to update it over the air, accused the phone that I'm using a modified version and can not update the system. = [
Click to expand...
Click to collapse
Did you flash the stock recovery when you installed the ROM ? there should of been 2 tick boxes, 1 says flash stock radio and the other says flash stock recovery just before the rom installs, I selected both when I ran it.
Seanie280672 said:
Did you flash the stock recovery when you installed the ROM ? there should of been 2 tick boxes, 1 says flash stock radio and the other says flash stock recovery just before the rom installs, I selected both when I ran it.
Click to expand...
Click to collapse
Yes, I marked them both! And...
you could try this, when you download the OTA, select install later, then plug you phone into your computer, and find the OTA on your internal storage, its just a zip file, open it with something like WinRAR and look for Firmware.zip, open that and extract recovery.img, you will see other things in there too like HBOOT etc, just ignore those, you only want the recovery for now.
Place the recovery that you just extracted into your fastboot folder and reboot your phone to fastboot mode, then flash it:
fastboot flash recovery recovery.img
It may be that the rom you flashed just has an out of date recovery in it and needs updating.
Once your phone is back on, check for updates again and see if it will install.
The trouble with OTAs is everything must be the same, if anything is disabled or missing that the OTA wants to update then it will fail, most of the time its down to an out of date recovery.
---------- Post added at 08:06 PM ---------- Previous post was at 07:19 PM ----------
You could always try manually updating if the above fails, link below is for the OTA, and the instruction on how to install it are at the top of the page.
OTA M7 U K44 SENSE55 MR HTC Asia WWE 4.20.707.7-3.63.707.4 Release 350432vv58wn1jy1a88n9h
Download
http://www.htc1guru.com/dld/ota_m7_...-63-707-4_release_350432vv58wn1jy1a88n9h-zip/
Instructions at the top of the page here:
http://www.htc1guru.com/downloads/ota-downloads/
The first set of numbers is what your rom will be updated too: 4.20.707.7
The second set of numbers is the rom version you are currently running: 3.63.707.4
K44 SENSE55 this bit means you will get KitKat 4.4 with Sense 5.5
Seanie280672 said:
you could try this, when you download the OTA, select install later, then plug you phone into your computer, and find the OTA on your internal storage, its just a zip file, open it with something like WinRAR and look for Firmware.zip, open that and extract recovery.img, you will see other things in there too like HBOOT etc, just ignore those, you only want the recovery for now.
Place the recovery that you just extracted into your fastboot folder and reboot your phone to fastboot mode, then flash it:
fastboot flash recovery recovery.img
It may be that the rom you flashed just has an out of date recovery in it and needs updating.
Once your phone is back on, check for updates again and see if it will install.
The trouble with OTAs is everything must be the same, if anything is disabled or missing that the OTA wants to update then it will fail, most of the time its down to an out of date recovery.
---------- Post added at 08:06 PM ---------- Previous post was at 07:19 PM ----------
You could always try manually updating if the above fails, link below is for the OTA, and the instruction on how to install it are at the top of the page.
OTA M7 U K44 SENSE55 MR HTC Asia WWE 4.20.707.7-3.63.707.4 Release 350432vv58wn1jy1a88n9h
Download
http://www.htc1guru.com/dld/ota_m7_...-63-707-4_release_350432vv58wn1jy1a88n9h-zip/
Instructions at the top of the page here:
http://www.htc1guru.com/downloads/ota-downloads/
The first set of numbers is what your rom will be updated too: 4.20.707.7
The second set of numbers is the rom version you are currently running: 3.63.707.4
K44 SENSE55 this bit means you will get KitKat 4.4 with Sense 5.5
Click to expand...
Click to collapse
With this "Guru_Reset_M7_3.63.707.4" my software number is 3.63.707.3 not 3.63.707.4
Should I try anyway?
andrekerplunk said:
With this "Guru_Reset_M7_3.63.707.4" my software number is 3.63.707.3 not 3.63.707.4
Should I try anyway?
Click to expand...
Click to collapse
That's strange ????, you are s-off right ?
That's probably the mis-match you are getting.
Seanie280672 said:
That's strange ????, you are s-off right ?
That's probably the mis-match you are getting.
Click to expand...
Click to collapse
Yes, I'm s-off
Also found it strange when downloading something and another appears.
Now I do not know what to do, since I have not the correct stock file.
3.63.707.3 = M7_UL (4g)
3.63.707.4 = M7_U (Non 4G)
Is your phone the 4g version or the non 4g version ? your output in the first post says non 4g (M7_U), but im wondering if at some point you changed your firmware to do that, don't want you flashing the 4g firmware if you don't have the 4g phone, it may brick it.
Seanie280672 said:
3.63.707.3 = M7_UL (4g)
3.63.707.4 = M7_U (Non 4G)
Click to expand...
Click to collapse
i'm M7U but guruRESET send me a wrong. I don't understand. And Now? =T
andrekerplunk said:
i'm M7U but guruRESET send me a wrong. I don't understand. And Now? =T
Click to expand...
Click to collapse
Yes, lots of people having the same problem in India, here is how to fix it: http://forum.xda-developers.com/showthread.php?t=2669217
Post 5 has the answer, you will have to download the RUU zip they linked and flash that instead, its for your MID and CID, I already checked, you will probably have to put TWRP recovery back on your phone first to flash that zip, you should get working OTA's then, but if you don't then refer to post 8 and what he did to get OTA's
Seanie280672 said:
Yes, lots of people having the same problem in India, here is how to fix it: http://forum.xda-developers.com/showthread.php?t=2669217
Post 5 has the answer, you will have to download the RUU zip they linked and flash that instead, its for your MID and CID, I already checked, you will probably have to put TWRP recovery back on your phone first to flash that zip, you should get working OTA's then, but if you don't then refer to post 8 and what he did to get OTA's
Click to expand...
Click to collapse
And how I install this rom 'RUU Zip M7_U_JB_50_hTC_Asia_WWE_1.29.707.4_R_Radio_4A.14.3250.13_10.33.1150.01_release_312087_signed_2_4_decrypted.zip"
Now I do not have TWRP, my bootloader say LOCK, s-off, hboot 1:44
Can you guide me?
andrekerplunk said:
And how I install this rom 'RUU Zip M7_U_JB_50_hTC_Asia_WWE_1.29.707.4_R_Radio_4A.14.3250.13_10.33.1150.01_release_312087_signed_2_4_decrypted.zip"
Now I do not have TWRP, my bootloader say LOCK, s-off, hboot 1:44
Can you guide me?
Click to expand...
Click to collapse
It shouldn't matter that your bootloader is locked as you are s-off.
Just download TWRP, put your phone in fastboot mode and then fastboot flash recovery (filename).zip to flash the new recovery, then transfer the rom RUU zip to your phone and flash it in recovery as normal.
Seanie280672 said:
It shouldn't matter that your bootloader is locked as you are s-off.
Just download TWRP, put your phone in fastboot mode and then fastboot flash recovery (filename).zip to flash the new recovery, then transfer the rom RUU zip to your phone and flash it in recovery as normal.
Click to expand...
Click to collapse
where I download TRWP
andrekerplunk said:
where I download TRWP
Click to expand...
Click to collapse
http://techerrata.com/browse/twrp2/m7
Download 2.6.3.3 then put it in your fastboot folder on your computer and rename it to recovery.img for ease later on
Reboot your phone into fastboot mode
Then plug into your computer, it should now say fastbootUSB on your phone
Then open command promt, easiest way is inside your fastboot folder on your computer, hold control + shift + right mouse click and select open command window here
then type fastboot flash recovery recovery.img and press enter (it only take a few seconds)
reboot your phone and copy the rom RUU zip to the phone storage
When finished, uplug your phone from the computer and boot to recovery
select wipe first and swipe to factory reset
then select install and choose the rom RUU zip in the list, swipe to begin the install.
Seanie280672 said:
http://techerrata.com/browse/twrp2/m7
Download 2.6.3.3 then put it in your fastboot folder on your computer and rename it to recovery.img for ease later on
Reboot your phone into fastboot mode
Then plug into your computer, it should now say fastbootUSB on your phone
Then open command promt, easiest way is inside your fastboot folder on your computer, hold control + shift + right mouse click and select open command window here
then type fastboot flash recovery recovery.img and press enter (it only take a few seconds)
reboot your phone and copy the rom RUU zip to the phone storage
When finished, uplug your phone from the computer and boot to recovery
select wipe first and swipe to factory reset
then select install and choose the rom RUU zip in the list, swipe to begin the install.
Click to expand...
Click to collapse
ok...but...
"Updating partition details...
Formatting Cache using make_ext4fs function
Wiping data without wiping /data/media...
Done.
Updating partition details...
Installing '/sdcard/ruuasia.zip'...
Cheching for MD5 file...
Skipping MD5 check: no MD5 file found.
Error flashing zip '/sdcard/ruuasia.zip'
Updating partition details...
Failed"
oh pants, I was hoping we wouldn't have to do it this way, its a bit more complicated, put your phone in fastboot mode and put rom RUU.zip in your fastboot folder on your computer and open a command promt.
From fastboot you need to first re-lock your bootloader
fastboot oem lock
Once locked it will boot back into bootloader
fastboot oem rebootRUU
Now your booted to the black HTC screen. Make sure your Rom.zip file is in your adb/fastboot folder
fastboot flash zip (filename).zip
This takes a couple minutes and you will most likely get a error
(pre-hboot update: please flush immediately)
Make sure device is still in ruu mode(black HTC screen).
now simply reflash the rom.zip
fastboot flash zip (filename).zip
Let it run and it should finish this time
It will reboot to a fully stock build.
just remember, anytime you get a "flush immediately" error, just make sure your still in ruu mode and reflash the zip.
---------- Post added at 11:28 PM ---------- Previous post was at 11:00 PM ----------
I have to go offline now, but i'll check up on you in the morning, but this should work for you now as long as you follow those instructions.
Seanie280672 said:
oh pants, I was hoping we wouldn't have to do it this way, its a bit more complicated, put your phone in fastboot mode and put rom RUU.zip in your fastboot folder on your computer and open a command promt.
From fastboot you need to first re-lock your bootloader
fastboot oem lock
Once locked it will boot back into bootloader
fastboot oem rebootRUU
Now your booted to the black HTC screen. Make sure your Rom.zip file is in your adb/fastboot folder
fastboot flash zip (filename).zip
This takes a couple minutes and you will most likely get a error
(pre-hboot update: please flush immediately)
Make sure device is still in ruu mode(black HTC screen).
now simply reflash the rom.zip
fastboot flash zip (filename).zip
Let it run and it should finish this time
It will reboot to a fully stock build.
just remember, anytime you get a "flush immediately" error, just make sure your still in ruu mode and reflash the zip.
---------- Post added at 11:28 PM ---------- Previous post was at 11:00 PM ----------
I have to go offline now, but i'll check up on you in the morning, but this should work for you now as long as you follow those instructions.
Click to expand...
Click to collapse
(bootloader) [RUU]WP,radio,100
(bootloader) ...... Successful
(bootloader) start image[rcdata] unzipping & flushing...
(bootloader) [RUU]UZ,rcdata,0
(bootloader) [RUU]WP,rcdata,0
(bootloader) ...... Successful
OKAY [218.237s]
finished. total time: 257.516s
thats ok...but the green line not complete in phone!
What do I do?
when its finished it should reboot itself, but I did read somewhere that the progress bar doesn't reach the top, just leave it to do its thing, but looks good so far, its working, you should get OTA's now and matching firmware, if the OTA's don't work have a look at post 8 in that thread I linked earlier on how to fix it.
Hello guys,
I have an HTC One S-ON and I want to try the new ROM with 4.4.3. In order to use those new ROMs, all the developers recommended to update first the firmware. Sadly, many of you have an S-OFF phone where are lots of tutorials that can help you. So, I've read a lot and made a short tutorial. If anyone of you can help me if a confirmation or not of this will be great and could help me to upgrade my phone to the latest firmware!!!
How to flash?
(bootloader needs to be relocked)
1.Re-lock your bootloader (this will most probably wipe content of your device)(Type in “fastboot oem lock”)
2.Copy downloaded .zip(from this site https://www.androidfilehost.com/?fid=23622183712460395) to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
3.Re-name .zip file to firmware.zip
4.Open command prompt
5.Boot your device in fastboot mode (vol down + power ===> fastboot)
6.Connect device to the PC
7.In command prompt cd to fastboot.exe location
8.Make sure you have correct modeid and cidnum (type: fastboot getvar all)(I've checked my phone with apk CID Getter and saw that I have modelid: PN0710000 and cidnum: HTC__032 and I think it is ok to flash the firmware)
9.Type: fastboot oem lock (if your device is not relocked yet)
10.Type: fastboot oem rebootRUU and wait for device to reboot(Is there a RUU file that should I download? This is the only trick part that I don't understand . I found this the latest http://www.htc1guru.com/dld/ruu_m7_u...igned_2-1-exe/ RUU file..but I'm not sure what to do with or if I really have to use it )
11.Type: fastboot flash zip firmware.zip and wait for process to complete
12.Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
13.Type: fastboot flash zip firmware.zip and wait for process to complete
14.Type: fastboot reboot
15.Unlock your bootloader and flash custom recovery if you are going to use custom ROM(Like the usual way using http://www.htcdev.com/bootloader and after that to change the stock Recovery with TWRP)
I hope I've understand everything and all will be right!
Thanks @mike1986. for the beginning tutorial. I've just updated it in order to uderstand the whole process.
Floare said:
Hello guys,
I have an HTC One S-ON and I want to try the new ROM with 4.4.3. In order to use those new ROMs, all the developers recommended to update first the firmware. Sadly, many of you have an S-OFF phone where are lots of tutorials that can help you. So, I've read a lot and made a short tutorial. If anyone of you can help me if a confirmation or not of this will be great and could help me to upgrade my phone to the latest firmware!!!
How to flash?
(bootloader needs to be relocked)
1.Re-lock your bootloader (this will most probably wipe content of your device)(Type in “fastboot oem lock”)
2.Copy downloaded .zip(from this site https://www.androidfilehost.com/?fid=23622183712460395) to fastboot.exe location (e.g. c:/SDK/platform-tools/fastboot.exe)
3.Re-name .zip file to firmware.zip
4.Open command prompt
5.Boot your device in fastboot mode (vol down + power ===> fastboot)
6.Connect device to the PC
7.In command prompt cd to fastboot.exe location
8.Make sure you have correct modeid and cidnum (type: fastboot getvar all)(I've checked my phone with apk CID Getter and saw that I have modelid: PN0710000 and cidnum: HTC__032 and I think it is ok to flash the firmware)
9.Type: fastboot oem lock (if your device is not relocked yet)
10.Type: fastboot oem rebootRUU and wait for device to reboot you will see a black screen with a silver HTC logo(Is there a RUU file that should I download? This is the only trick part that I don't understand . I found this the latest http://www.htc1guru.com/dld/ruu_m7_u...igned_2-1-exe/ RUU file..but I'm not sure what to do with or if I really have to use it )
11.Type: fastboot flash zip firmware.zip and wait for process to complete
12.Sometimes flashing for the first time doesn't work, so flash firmware.zip again just to make sure.
13.Type: fastboot flash zip firmware.zip and wait for process to complete
14.Type: fastboot reboot
15.Unlock your bootloader and flash custom recovery if you are going to use custom ROM(Like the usual way using http://www.htcdev.com/bootloader and after that to change the stock Recovery with TWRP)
I hope I've understand everything and all will be right!
Click to expand...
Click to collapse
Basically the flashing the firmware steps when you are S-ON or S-OFF are the same. The only difference is if you are S-ON you must have a locked bootloader, the firmware version must be the same or higher and it must be signed.
Step 10 - You want the device in RUU mode to accept the firmware.
Step 11 - The flashing of the firmware the first time is to set up the device to accept the firmware. It should fail the first time.
Step 12/13 - Exact same code as step 11
majmoz said:
Basically the flashing the firmware steps when you are S-ON or S-OFF are the same. The only difference is if you are S-ON you must have a locked bootloader, the firmware version must be the same or higher and it must be signed.
Step 10 - You want the device in RUU mode to accept the firmware.
Step 11 - The flashing of the firmware the first time is to set up the device to accept the firmware. It should fail the first time.
Step 12/13 - Exact same code as step 11
Click to expand...
Click to collapse
@majmoz Thank you very much for your help! I did it in the end! I was calm and the target was hit..like I could say!
The moderators could close this thread. Thank you guyz for your hard work!