Calling problem, screen won't wake - Moto X Q&A

Got my X today and I'm really enjoying it overall! However, I'm having a problem where once I make a phone call I can't wake the phone to enter anything on the key pad or even hang up. I've kept the factory screen protector on until mine get delivered so I wondered if it might be a proximity sensor issue but power, volume, screen taps don't work. Thanks in advance for any thoughts you all might have.

Doing a quick shake wakes the phone up, lol. Feature or wonkiness?

I had the same problem, just reset the phone twice and the second time it fix it by not choosing the restore backup data automatically. (Don't know why) but its working now.

Had the same problem and also had horrible battery life, seriously 3-4hrs total life. (Even afyer 3 resets)Took it in and complained of proximity sensor issue and they switched it out. No problems with the new one and first go round 14hrs life with 4+ screen on. Watch your bay life if the issue is still there or get replaced before carrier deadline to be safe.
Sent from my XT1055 using xda app-developers app

Related

Can't reach the Power button - any other way to wake screen?

Loving my HTC One, but I have such small hands that I can hardly reach the Power button to wake it up after it goes to sleep!
Does anyone know of an app where I can use the Volume button instead?
Thanks in advance.
Only way to possibly assign the sleep/wake function to the volume buttons would mean having to be rooted. I don't know if anyone's made that change yet though, it might just require editing a single file. Don't have any experience with This myself so not 100%. Just know it requires root.
Sent from my iPhone using Tapatalk 2
After a quick search online I've discovered Auto Screen On in the Play Store, which lets me double tap the proximity sensor (left of top speaker) to wake it up.
Works perfectly but an app using the Volume button would be much better.
With this app your screen has to be awake all the time and will drain your battery i think.
On TrickDroid v2.0.0 u can choose VolWake in Aroma
LG, Helmut
Moved your thread to the proper section for you. Please remember to post only in the correct sections. Thanks.
I've heard of some app for a nexus 4 that allows you to just swipe the screen and it turns on. Not sure what it was called, but you get the concept.
Good job I have big hands really because this nor generally using the phone is an issue due to its size.
Sent from my HTC One using xda premium
I'm assuming sweep2wake or swipe2wake will eventually be implemented. It's basically swiping left to right on the capacitive buttons to wake the phone.
The One X had it, but it was a bit buggy when I used it in terms of it not working if the phone was asleep for a long time. I got rid of my One X a while ago though so idk how the feature works now and if they figured it all out., but I expect it to get implemented on the HTC One eventually.
The proximity sensor isn't a bad idea, jailbroken iPhone 5 etc...have the always on proximity where if you cover the proximity it'll turn the screen off and eventually lock the phone after a while. So you can put it in your pocket and it will turn the display off, bring it out of pocket and it comes on without needing to slide to unlock or anything. It's good if your messaging constantly.
pewpewbangbang said:
I'm assuming sweep2wake or swipe2wake will eventually be implemented. It's basically swiping left to right on the capacitive buttons to wake the phone.
The One X had it, but it was a bit buggy when I used it in terms of it not working if the phone was asleep for a long time. I got rid of my One X a while ago though so idk how the feature works now and if they figured it all out., but I expect it to get implemented on the HTC One eventually.
The proximity sensor isn't a bad idea, jailbroken iPhone 5 etc...have the always on proximity where if you cover the proximity it'll turn the screen off and eventually lock the phone after a while. So you can put it in your pocket and it will turn the display off, bring it out of pocket and it comes on without needing to slide to unlock or anything. It's good if your messaging constantly.
Click to expand...
Click to collapse
iirc showp1984 said he's getting a htc one, and see oz did too so hopefully one of them will bring sweep to wake Zarboz did an excellent job on the incredible s and he doesn't even have the device
Sweep to wake generally doesn't work sometimes in deep sleep. I use vol wake and the. Sweep to go to sleep on my incredible s now s2w is actually the greatest thing ever
MOD EDIT: Removed

proximity sensor issue?

Anyone else seem to have a problem with the ambient light/proximity sensor on their N6? I've noticed that a lot of times when i make calls, the screen won't shut off when i put the phone to my head... often with that resulting in my cheek touching something, and the person on the other end not being able to hear me. If i leave the phone at an angle against my ear so my cheek doesn't touch the screen, eventually the screen will shut off, but won't come on when i take the phone away from my ear, resulting in me having to press the power button to turn the screen back on.
Had that happen to me yesterday ... Rebooted and it hasn't happened today.
Sent from my Nexus 7 using Tapatalk
I'm having a issue now. Phone call comes in and screen stays on. I did a reboot, factory reset even installed custom ROM. It was working the other day. Anyway to calibrate this thing? Or do we have a bad sensor.
Also now my phone won't rotate screen.
Sent from my Nexus 6 using Tapatalk
Do any of you happen to have a screen protector on? As there have been some users that have been reporting issues with certain screen protectors. I believe most are tempered glass protectors that are the cause of the problems.
I took mine off and still nothing.
Sent from my Nexus 6 using Tapatalk
v4npro said:
I took mine off and still nothing.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Did you try going to settings , accessibility , power button ends call, toggle that on and off.
We own two new Nexus 6 devices that are rooted and decrypted. We have the same issue where the phone screen stays on during a call. Rebooting fixes for a short period (hours or so) but the problem comes back. Other threads show this to be an issue with other phones (nexus 5) with Lollipop. Not sure of a fix. These devices are only a few weeks old so it is not a dust issue.
Having the same issue that just suddenly started. Rebooting does not seem to help.
Happening here too. Frustrating.
My screen turns off when taking the phone to the ear but it doesn't turn on again after i take it away from my ear.
It's pretty bad on my phone. The screen turns on when I am on a call making the notification bar drop down. Also, the phone doesn't wake up when I pull the phone away from my fasce 80% of the time. When I am on a call the phone randomly vibrates like I am getting a notification and when I look I have nothing. With all of this going on, making phone calls on this device is a nightmare.
Restore clean wipe did nothing.
nexus 6
The below mentioned fix is for brand new Nexus 6.
Did you try going to settings , accessibility , power button ends call, toggle that on and off.
After completing the above mentioned step. Reboot your phone and try making a call. I hope the issue get resolved.
I tried this step on an unrooted phone, which was recieved just yesterday.
I got this fix from some other thread.
aditya2529 said:
The below mentioned fix is for brand new Nexus 6.
Did you try going to settings , accessibility , power button ends call, toggle that on and off.
After completing the above mentioned step. Reboot your phone and try making a call. I hope the issue get resolved.
I tried this step on an unrooted phone, which was recieved just yesterday.
I got this fix from some other thread.
Click to expand...
Click to collapse
I'm using an app a Dev created just for this issue and it's fixed.
Nexus 6
Krunk83 said:
I'm using an app a Dev created just for this issue and it's fixed.
Nexus 6
Click to expand...
Click to collapse
What app
Orzly works fine... It doesn't cover the sensor. The Slimwrap orange vinyl (leather) face was a problem for me, had to enlarge the cutout to get suitable performance. I believe the sensor is longer than it is wide, the opposite of the factory cutout? It frames the face of the phone nicely with this screen protector on and I didn't want to take it off. The 24mm added height changes the profile of the phone alot, it no longer rests on the speaker bars/guards. This must also have effected placing the wrap on as well. The larger cutout box for the sesnor is a detractor, but the sensor works 100%. This is good , as it is my intention to run nekid with this phone but its size precludes using a case with any of the pockets I currently own.
fazbender said:
Orzly works fine... It doesn't cover the sensor. The Slimwrap orange vinyl (leather) face was a problem for me, had to enlarge the cutout to get suitable performance. I believe the sensor is longer than it is wide, the opposite of the factory cutout? It frames the face of the phone nicely with this screen protector on and I didn't want to take it off. The 24mm added height changes the profile of the phone alot, it no longer rests on the speaker bars/guards. This must also have effected placing the wrap on as well. The larger cutout box for the sesnor is a detractor, but the sensor works 100%. This is good , as it is my intention to run nekid with this phone but its size precludes using a case with any of the pockets I currently own.
Click to expand...
Click to collapse
Thanks I was just having a crazy time trying to install the front, similar case (glass protector in front) and ended up cutting a hole for the proximity sensor about 2 times the factory height, everything (seems) normal now. I used this program to help make the minimum cut, and align correctly. Did you run into any issues with the thin left & right vertical part of the front cover? Mine seems to "wrap" around the glass protector, not sure if it will stay there though

Black screen after call - growing tired of this phone

Does anyone else have this issue? It's really driving me crazy to the point where I feel like ditching the Nexus 6. It's not even every call, but it is enough to annoy me. Pull the phone away from my head and the screen wont wake up. All I can do is long hold power to force a reset. It's really annoying. I've tried the proximity fix for 5.1 but it still happens. I can't set "power to end call" because also sometimes the phone doesn't wake the screen when there is an incoming call so I have to press power to wake the screen to see who it is.
Does anyone have any idea how to get around this other than the two solutions above? This has happened on both my devices (Original and RMA) and I just can't take it any more.
I sounds like a faulty proximity sensor. And I've observed intermittent behavior like this on previous phones (but not my N6). You can test this with a number of apps. I've used "Sensor Box for Android", but there are several more. Prox sensor is located near the top LH corner. With the app open and on prox sensor, passing your hand over it should register on the app.
You are so active on this forum that I won't even ask about a screen protector....
The proximity sensor seems to work fine under all tests that I have done. I actually use Tasker to utilise the proximity sensor to set ringer volume based on whether it is activated or not (eg in my pocket, proximity sensor CLOSE, set ringer high).
Its not every call either and multiple Nexus 6 devices have had this issue for me too. Proximity sensor works in every test
That's weird. I've had no issues at all. I assume you have the issue on the stock ROM too.....
I suppose I'll have to test though I don't really want to run stock.
What about disabling Tasker and trying it out.
Happens with or without tasker. It's pretty much always done it since 5.1
There are known issues with the prox being flaky on this device. I just need to find a way to overcome this.
Remember, we need to separate problem solving from the idea of how we want our phone to look and perform. Once you've identified the root cause, you can then decide what steps you want to take to solve it.
*Sigh* Yes I know. But it's so intermittent I won't know if it solves it for a looooong time. It would be quicker to return to stock, sell it and buy something else
I've literally never ran stock on the nexus 6.
Like Camera indicated, I'd try removing the screen protector if you have one and see if it's better.
It's not a protector issue.
Let's assume I've done all the obvious things except flash stock
Edit. I'm going to try and use power button ends call. Just to see of its an active call that causes it.
Hopefully it will happen when I can take a log cat but inise the phone very rarely.
Try this app in the Playstore.
https://play.google.com/store/apps/details?id=com.vorlan.screenoncall.free
I had a similar issue where the screen would time out while I was on a call and wouldn't wake when I moved the phone away from my face. I had to hit power button to wake phone and enter pin just to end a call. I make/recieve over 100 calls per day and it was getting old til I found this app. Works perfectly every time.
Thanks but that's not the same issue. Mine will not wake at all. I have to force a reboot to get display
You might give the app a try just to see. It keeps the screen on during a call but the proximity sensor still shuts the screen off unless you are on speaker phone. It may not work, but worth a try to keep your N6!
I've seen the same thing with my N6, display goes black (randomly, not even related to a call) and the only thing I can do is reboot. Haven't wasted any time looking for a solution, 'cause I don't think there is an easy one and there is no way to know if something you try is even going to work! I just reboot and move on.
Just posting to let you know you are not crazy and there is someone else out there with the same problem!!!
I'm not sure what you mean. I've been recommended this app before but I don't like the idea of mybscreen being on.
What do you mean it keeps the screen on but proximity still shuts it off? .
Thanks for confirming
Basically it doesn't let the screen timeout. Proximity sensor still functions like normal.
I would try it and see.
If it helps good, if not no harm. It definitely fixed my issue, even if my issue wasn't exactly what you're experiencing.
Well power button end call didn't help. I don't think it is a proximity sensor issue. Let's hope it happens when I can get a logcat. Unlikely. Maybe a job for tasker.
I had this issue too. I eventually thought it was tied to UV, but then I installed all stock and didnt change anything and it still happened. Maybe a bug in lollipop.

Weirdest black screen issue, tried everything ....

Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
I would say it's a warranty job, just tried turning my brightness to zero and you can still see the screen.
I did have a similar problem on an old note that had root and custom rom though but I had somehow set the volume rocker to control brightness and it had lowered itself to minimum in my pocket
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
Try pressing and holding Volume down and power button for 5 to 7 seconds to force power off, then try to boot to download mode Volume Down + Bixby + Power button and see if the download mode screen shows......if not then probably a bad screen.
Sent from my God Mode 8
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
KEVIN88GT said:
Tried it......nothing.....warranty job it is.... Bummed to have some refurnished phone in exchange for a Brand new 900 dollar phone just a few months back?
Click to expand...
Click to collapse
Yeah that sucks, i can imagine..... i too hate the idea of refurbished units being swapped for warranty....bs, should be brand new unit!
Sent from my God Mode 8
so I had it replaced under warranty through T mobile. Refurb phone will come in today. One quesion. Should I let the Tmobile techs do the data/settings transfer from old phone to new one or just do everything myself from scratch (which will obviously take longer).
This happened to my phone twice for the past month or so. (both in Nougat and Oreo - Non rooted) Black screen but phone seems to be responding -- I can receive calls and notifications etc -- And force reboot doesn't fix it. I've also tried drainging the phone when it first happened to me but doesn't work. HOWEVER, it gets okay so randomly. Like I just left it for couple of hours and it just worked when I hit the power button.
I did tried bringing the device to Samsung but what they did is to just manually upgrade/reset the software in their end which I could have done in my part but I just let them do it. They told me to come back if it happens again which is kinda BS.
I can conveniently say this is a Hardware issue. I will wait for it to happen again on my phone and request for a replacement. Phone is 4 months old when it first happened.
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Reprocrastinator said:
I have the same issue with blank screen but phone is working.
It started couple of weeks after i dropped my phone on the ground. There is black dot on my screen and broken glass but phone was working ok and was still pretty usable. But then it started:
Display works fine but when i switch display of, lock the phone or display switched because of its timer it didn come switch on... But phone works, i can use it with blank (black) screen.
I had to do force restart so the display will turn on with samsung logo and booting screen, and keep on till another switch of.
I was trying every setting (but no hard reset) and then i found a little hack:
When you turn on the "Always On Display" (AOD) function you can let the screen switch off or do it manually, wait for 1-2 sec and always on display will come up to the screen. Then when you press home button or lock button screen will swtich on normally. YOu can type pin and use phone witch screen working. But when you try to unlock from "AOD" with your finger or your eyes it unlock but with screen black.
So i was using it like this. everytime you need to wait second untill AOD comes up, but it was working fine.
Problem nu 2 is that now it stop working, AOD is working but when i want to switch screen on from AOD it shows black screen and phone is working on blind.
So everytime after my screen goes black or to AOD i have to unlock the phone blindly and "Force restart" it and have to keep waiting until boot, and then have to never let phone to screen of.
Its not usuable.
¨
Now what do you think? Is it hardware problem or software problem? Because screen is working but randomly. The black dot of dead pixels on the screen is getting slightly bigger in time (about 1 year) but its like 1.5cm round. Maybe this cause the problem? And why hack with AOD was working for half a year and then stoped working? There wasnt any updates right before, but i tried to install some apps (non display related) so ill try to uninstall them.
Hawe you got any idea if i can repair it on my own even if i loose the waterproofability?
Or can it be replaced for free if i have a warranty? (I dont have insurance)
Thanks for your tips guys.
Click to expand...
Click to collapse
If you're under warranty it will likely be a free repair, unless they find other damage. Like moisture damage.
As far as fixing it yourself, it's just about as cheap to have Samsung do it than it is to buy the parts yourself. It's $229 for Samsung to do it, and you'll maintain the water resistance rating.
same has happened to me
KEVIN88GT said:
Non rooted, T mobile branded 3 month old note 8. No water damange, no drops etc.
Using chrome one miniute, set the phone down to watch a movie on my tablet, picked up the phone to check messages and boom. Screen is off. The phone works, I can even answer calls because I know where the answer button is on the screen, haptic feedback works, all indicator lights work. The phone screen remains off.
Tried a soft reset (tried hard reset too the best I could being I cant see the screen) and the phone seems to reset based on the vibration and indicator light patters but the screen remains off. It's as if a physical connection between the screen and the brains of the phone has been severed. Literaraly the weirdest thing that has happened to me in a decade of Android phone ownership.
Googled all the black screen issues with these phones and most of them are resolved with just a soft reset... some said that the phone is in it's lowest dimmed state and go to a dark room and i'll see it faintly and then can increase brightness... no luck...
Has anyone experienced this?
Click to expand...
Click to collapse
This has just happened to my note 8 too. I was about to update it and had started it. set my phone down and picked it up and phone screen is black but can hear the haptic feedback.
I can only see the lock screen and the notifications. Everytime I try to unlock my phone I only get to see a glimpse of the notescreen and then the screen turns black. Even when I try to go to camera through the lock screen the screen goes black too. When I charge my phone it heats up so I haven't really charged it as well. Has this also happened to anyone? It seems as if the phone's sensitivity still works in all places but when I unlock it the screen just goes black.
I also have problem of freezings and always rebooting. Tried soft and hard resets/factory reset. Still same problem. This phone has hardware issue. Do not buy.
I realize this thread is quite old but I have this exact same issue now. I have managed to discover some other information by playing around with various settings which are noted below. To begin with, I was able to used the AOD hack posted above for a while but it no longer works. The only way I can get my screen to come back is with a soft reset - but as soon as the screen times out or i turn it off, it goes black, with or without AOD enable. All the on screen buttons still work as well as the haptic feedback - I just can't see anything.
Now on to what I have found:
One thing I have found is if I turn off adaptive screen brightness and crank the brightness slider to the right, when it goes black I can faintly see some of the buttons - enough that I can turn the phone off or restart it from the power menu (If I switch the default setting to night that also helps to see the buttons a bit better). Also, if I enable night mode I can also see the brightness slider faintly but when I slide it left, it just makes the screen completely black and when I slide it right, it only returns it to the very faint brightness level.
So at this point I am stuck. To summarize the issue:
1. When the screen either times out or turns off, it is still "alive" but goes black. It will not return to normal brightness.
2. Turning off adaptive brightness and cranking brightness slider to right allows you to see faint buttons after screen times out but won't return to normal brightness.
3. Enabling night mode helps to see the faint buttons, in particular the brightness slider a bit better. However the screen still cannot return to normal brightness.
4. The only way to get the screen back to full brightness (albeit temporarily until the next timeout) is to turn off the phone or reset from the power menu; or soft reset holding volume down + power simultaneously.
Hopefully someone else has figured out a way to recover this. I am on Android 9 with Samsung UI 1.0
Phone is completely stock, never rooted and completely out of warranty.

Lift to wake stops working periodically

I just picked up an XZ2 for a steal. So far I really like the phone, but one thing has really been nagging me. The lift to wake functionality works pretty well most of the time, but occasionally, it will just stop working completely. It's like the phone goes to sleep and stops recognizing the sensors or something. It doesn't happen after sitting for a long time, either. It actually happens right after I've been using it. Today, the screen timed out and went black and no matter how much I shook the phone, put it in my pocket and took it out, etc., it never worked again until I hit the power button.
Before someone suggests just hitting the power button or fingerprint sensor: You're missing the point. I shouldn't have to. It's bad enough that Sony took tap-to-wake from us and never gave it back. But I expect this feature to work consistently. Really, you should rarely, if ever, have to hit the power button. A similar feature on the iPhone works without fail almost 100% of the time.
I'm just looking to see if anyone else has experienced this. The phone is fresh out of the box, has the latest build (51.1.A.4.225) and was set up manually, not restored from a cloud backup. Has anyone else seen this?
Oh yes, it is one of three really small, miniscule bugs I've got with my XZ2. In my case, the lift to wake only stops working a few times and after I wake the phone manually, it works the way it should work again. But it only happens in those rare times.
AlvinZahran98 said:
Oh yes, it is one of three really small, miniscule bugs I've got with my XZ2. In my case, the lift to wake only stops working a few times and after I wake the phone manually, it works the way it should work again. But it only happens in those rare times.
Click to expand...
Click to collapse
Thanks. Yeah, it's annoying. The inconsistency drives me crazy. It seems to have something to do with the screen timeout.
I wish they would just give us proper tap to wake back.
Sent from my H8266 using Tapatalk

Categories

Resources