Help! My phone won't charge or connect to any USB - One (M7) Q&A, Help & Troubleshooting

Ok so last night I transferred some files with otg cable. Unmounted the usb and then went to put the phone on the charger and it did not recognize the charger. I did get it to charge after I powered it down and let it sit all night. But when the phone is on it doesn't recognize anything plugged into the usb port. Anyone have any suggestions?
I posted this over in the AT&T forums already since that's my carrier but I am running international firmware and rom so I figured it irrelevant here as well. Running the 3.09.401.1 firmware since it dropped and Maximus 12.1 rom. Also have tried switching my rom back to a 2.24.401.8 base with no difference.
Today I noticed then when booted into recovery it also will charge. So not convinced it is my port... But not sure hat I can do either since I can't get USB to recognize while it is on or in the bootloader... PLEASE HELP!!
Sent from Tapatalk

Clselfridge said:
Ok so last night I transferred some files with otg cable. Unmounted the usb and then went to put the phone on the charger and it did not recognize the charger. I did get it to charge after I powered it down and let it sit all night. But when the phone is on it doesn't recognize anything plugged into the usb port. Anyone have any suggestions?
I posted this over in the AT&T forums already since that's my carrier but I am running international firmware and rom so I figured it irrelevant here as well. Running the 3.09.401.1 firmware since it dropped and Maximus 12.1 rom. Also have tried switching my rom back to a 2.24.401.8 base with no difference.
Today I noticed then when booted into recovery it also will charge. So not convinced it is my port... But not sure hat I can do either since I can't get USB to recognize while it is on or in the bootloader... PLEASE HELP!!
Sent from Tapatalk
Click to expand...
Click to collapse
If recovery is working, flash back to stock and then see if USB is working.

kibmikey1 said:
If recovery is working, flash back to stock and then see if USB is working.
Click to expand...
Click to collapse
Problem is I don't have my stock backup I accidentally forgot to move it before formatting going from 4.1.2-4.2.2. And since I can't get it to recognize USB I'm not sure how to get anything back on there... I feel like I want to blame firmware because it doesn't matter which rom I use from two different bases...
Sent from Tapatalk

I have the same problem, I was on the Maximus ROM and a factory reset let me get USB working enough to copy across ARHD, but since setting up the ROM its since stopped working again.
occasionally it pops up saying it is in USB host mode, i'm pretty sure this is the problem, but when i plug in my OTG cable the USB drive on the end is not detected either.

downloading a stock backup and am going to try taking an ota to flash firmware see if that corrects the issue. if not then i guess i will be trying to get it replaced because it must be hardware at that point. i dont know what else to try.

So it appears to be software/firmware related. I went back to stock rom and recovery in hopes that I could take an ota and let it downgrade my firmware... However I forgot that the touch drivers I have don't function with the old stock rom... I am now getting charge while booted up though... Plugged into pc I get charge but no management capability...yet. I have no idea how to do anything on the phone to help my cause at this point besides maybe going back to see if the computer picks it up in hboot now...
Sent from Tapatalk

Related

Non working USB

The USB on my phone has jacked up somehow. It will charge, but refuses to connect to my PC to mount the SD card.
I have 2 captivates, one works, one doesn't. Using the same USB cord and port, so I know the drivers are installed properly. (Since one phone works perfectly).
So, I have Gingerbread 2.3.3 (Mikeys) flashed on it. Is there any way I can restore back to factory without needing to use odin? Since it wont connect via usb, I cannot get it to work.
I can get a .zip on the phone by using dropbox and downloading it, or just dling straight from the internet.
Basically is there a rom or zip that will flash everything back to stock so I can take it into an att repair shop and they will replace it?
thanks.
Nope, you can flash cognition, that has a froyo secondary boot loader in it so flashing that from gingerbread will result in a hard brick. Go up to att, play dumb tell them you were using kies to update and it never came back on. They should replace it with no, or very few questions asked.
Well, your idea is good.
I got it to connect via usb after wiggling it big time, and odin found it so I tried to reformat the phone to stock really fast.
I literally didn't touch the phone and it became disconnected, according to odin, and stopped flashing durig the factory.fs. Now it's a hard brick
I'll just take it in tomorrow and say I was updating it and something happened.
I've had luck replacing old phones like the HTC Kaiser. Every time I took it up there, they fiddled with it for a few minutes, then gave me a replacement. (I think I bricked the Kaiser at one point and got a replacement).
This should be fun, lol.
Haha different approach, same result ;p
Enjoy the refurb.
Lol it's something we all (almost) have to go through
Just have to act like a noob = win

[Q] Phone won't connect to computer

Alright, so before I get flamed, I have searched for over an hour today, and I have not been able to figure this out. I am not new to android, rooting, custom roms, and editing files, so I have tried a multitude of different things.
To the point, my Droid 3 will not connect to my computer. It did a couple weeks ago when I flashed the Liberty Rom onto it, but now it'll just charge and not go into the USB mode. The only reason I know it is charging is when I disconnect the cord it says the disconnected message.
I have tried a couple different cables, and I usually use my stock cable that came with my D3. I have also tried restarting my phone and computer. I even flashed the newest Liberty Rom the hard way and still no luck.
If someone could please help me out I would be VERY grateful as this is a PITA!!!
Thanks in advance!
My two cents would be, try different usb port and make sure you have the most current moto drivers.
Have had luck with uninstalling driver pack and reinstalling.
Hope that helps.
Sent from my DROID3 using XDA App
I appreciate the help, unfortunately uninstalling the drivers didn't work, unless I didn't get the correct drivers? I went into uninstall programs. In the device manager nothing came up for my phone or drivers. And I have also tried different ports but to no luck. Thanks again for the reply.
Have you tried a different computer? A different device? Let's just rule out that this isn't a computer issue first...
My Zune works in all of my ports, and my other computer. My Phone however does not. It does the same thing as my other computer, although I guess I don't have the drivers on the other computer, but it would still come up as usb connection right? All this does is charge, sometimes.
Have you tried Linux? No drivers are needed. download a live CD and see if it helps.
eww245 said:
Have you tried Linux? No drivers are needed. download a live CD and see if it helps.
Click to expand...
Click to collapse
Can you explain?
("Very Important"!) PLEASE POST!!!
After sufferring through the same issue and delving deeply for almost two days,I have found the culprit!!! IT IS THE USB CORD AND NOT THE DRIVERS OR ANYTHING ELSE!!"SIMPLY USE THE FIRST USB CORD THAT YOU USED THE VERY FIRST TIME YOU PLUGED INTO YOUR COMPUTOR AND THAT WILL RECTIFY(FIX) YOUR PROBLEM.(IT HAS TO BE THE VERY FIRST USB CORD OTHERWISE YOU WILL CONTINUE TO HAVE THIS PROBLEM UNTIL AND NO OTHER COMPUTOR WILL RECOGNIZE YOUR DEVICE UNTIL YOU DO WHAT I SAY.I thought it was the rooting of my phone that initially caused the issue or maybe an app,however,I found the culprit.The usb cord!!!(WHATEVER USB YOU USED FOR THE VERY FIRST ,STOCK OR NOT,IT IS THE ONLY ONE YOUR COMPUTOR WILL RECOGNIZE!!! I HOPE THIS HELPS THE MANY OF YOU THAT ARE HAVING THIS SAME ISSUE AND GOOD LUCK
Sent From My Droid 3 using TapaTalk
xFreak-a-Zoidx said:
RECTIFY(FIX)
Click to expand...
Click to collapse
Thanks for clearing that up for me, I haven't competed the fourth grade.
Dude could've just said use the USB cord that came with the phone, to each his own. I have 6 micro usb cables and only the moto official will allow me to do anything other than charge the phone via cpu.
Sent from my DROID3 using XDA App
The only problem is that I ONLY use the cord that came with my D3... Any way to flash the stock rom onto my phone from my phone and unroot? Then I can take my phone into verizon and get a new one... and a new cord..
ajgates92 said:
The only problem is that I ONLY use the cord that came with my D3... Any way to flash the stock rom onto my phone from my phone and unroot? Then I can take my phone into verizon and get a new one... and a new cord..
Click to expand...
Click to collapse
That sucks. You can find the .890 sbf floating around in android development and flash it, I believe it takes everything to stock including unroot.
Sent from my DROID3 using XDA App
I looked in the thread posted, but the link to the flashable zip is down. So i'm stuck at a standstill right now.
This link works fine: http://dev-host.org/t6y98oinbk1f/Droid_3_SBF_5.6.890.zip
blmetzger said:
This link works fine: http://dev-host.org/t6y98oinbk1f/Droid_3_SBF_5.6.890.zip
Click to expand...
Click to collapse
Can I flash that wit cwm or the stock recovery though? I can't use RSD or fastboot because nothing happens when I plug my usb into it.

[Q] After root, only charges when off.

Hi there,
Rooted my phone yesterday, downgraded from HBoot 2.00 to 1.13 using Nonverbose's script and then used Revolutionary to get S-OFF and then finally flashed Virtuous Quattro RC3 as well as the latest Tiamat kernel.
Works fine, just the phone won't charge if it's switched on. I have to power off for it to charge at all.
I know it's not a ROM problem, because I've tried both Quattro and IceColdSandwich, and neither will charge, and I'm quite sure it's not the cable, as it obviously works when powered off. I have also tried two other cables and one wall charger.
I've tried reflashing the kernel, doing Davlik cache wipes etc. Also checked the battery for bent pins, and it seems fine.
Is there any diagnostic check I can run to see if the battery is faulty etc? Or something I forgot while rooting/flashing?
Thanks in advance,
Larry
larryorsomething said:
Hi there,
Rooted my phone yesterday, downgraded from HBoot 2.00 to 1.13 using Nonverbose's script and then used Revolutionary to get S-OFF and then finally flashed Virtuous Quattro RC3 as well as the latest Tiamat kernel.
Works fine, just the phone won't charge if it's switched on. I have to power off for it to charge at all.
I know it's not a ROM problem, because I've tried both Quattro and IceColdSandwich, and neither will charge, and I'm quite sure it's not the cable, as it obviously works when powered off. I have also tried two other cables and one wall charger.
I've tried reflashing the kernel, doing Davlik cache wipes etc. Also checked the battery for bent pins, and it seems fine.
Is there any diagnostic check I can run to see if the battery is faulty etc? Or something I forgot while rooting/flashing?
Thanks in advance,
Larry
Click to expand...
Click to collapse
Ics roms are always bit laggy atm. Quattro isn't made to use with tiamat. Icecoldsandwich 7 dont needs tiamat cause the stock kernel ist better optimized for it. Try a stock sense, miui or cm7 rom. If this doesn't suit too i think your usb port is in yhe ansroid heaven.
Sent from my HTC Incredible S using xda premium
Silversniper said:
Ics roms are always bit laggy atm. Quattro isn't made to use with tiamat. Icecoldsandwich 7 dont needs tiamat cause the stock kernel ist better optimized for it. Try a stock sense, miui or cm7 rom. If this doesn't suit too i think your usb port is in yhe ansroid heaven.
Sent from my HTC Incredible S using xda premium
Click to expand...
Click to collapse
Okay, I'm going to install CM 7.2 RC1 today. When I flash the ROM, do I have to flash another kernel or will Tiamat get lost automatically? Where can I find a download for the stock kernel?
Thanks!
Stock kernel will be included within the rom anyway. So don't worry.
Sent from my Incredible S using xda premium
You can transfer files while connected via USB?
I installed CM 7.2 by loading it onto the MicroSD card via a cardreader, because I couldn't get my phone to mount storage on my PC (I kept getting the 'device malfunctioned' message). I can't find the setting to enable disk drive mode, or battery info, can anyone help with this?
Actually, I've got it on now, and I just saw it go from 'Charging (9%)' to 'Charging (8%)', the same as the other roms.
I guess it's the microUSB port?
larryorsomething said:
I installed CM 7.2 by loading it onto the MicroSD card via a cardreader, because I couldn't get my phone to mount storage on my PC (I kept getting the 'device malfunctioned' message). I can't find the setting to enable disk drive mode, or battery info, can anyone help with this?
Actually, I've got it on now, and I just saw it go from 'Charging (9%)' to 'Charging (8%)', the same as the other roms.
I guess it's the microUSB port?
Click to expand...
Click to collapse
Do you use your device while charging? Sometimes is the Usb Output lower than the used power. Have you disabled wifi/data/wlan and do on while charging? You have to press in the notification bar on the Usb. Notifications and select usb drive
Sent from my HTC Incredible S using xda premium
By way of some miracle, USB mass storage and debugging are working now. Should I try to unroot to get back to S-ON for warranty, assuming it's the microUSB port?
Oh, and I just saw it go from Charging 11% to 12%, so I guess it's charging. I'm afraid to touch it though, guessing the port's really fragile.
larryorsomething said:
By way of some miracle, USB mass storage and debugging are working now. Should I try to unroot to get back to S-ON for warranty, assuming it's the microUSB port?
Oh, and I just saw it go from Charging 11% to 12%, so I guess it's charging. I'm afraid to touch it though, guessing the port's really fragile.
Click to expand...
Click to collapse
If you unlocked it via Htcdev idk if you revert the warranty back because they safed the Toked from you device. If you riitrd ir without any token or so, i would revert it
Sent from my HTC Incredible S using xda premium
I didn't use htcdev, just Revolutionary? (not sure if they do the same thing, sorry)
larryorsomething said:
I didn't use htcdev, just Revolutionary? (not sure if they do the same thing, sorry)
Click to expand...
Click to collapse
They don't
You can get it Back to S On
Sent from my HTC Incredible S using xda premium
Uhh so I'm trying to follow this guide to get back to S-ON, but it requires ADB and USB debugging. After flashing the stock rom back on, I can't seem to get debugging to work again. The USB icon is in the status bar so I know it's charging, but there should be a notification for debugging mode, right?
I'm assuming it's not possible to put the files on the microSD card and then flash the HBOOT on the device itself? (maybe I should post about this in the guide's thread)
EDIT: I should also note that despite being able to set it to disk drive mode, I'm still getting the 'device malfunctioned' message on my PC, so I can't directly transfer files to the SD. I guess that's why debugging isn't working.
larryorsomething said:
Uhh so I'm trying to follow this guide to get back to S-ON, but it requires ADB and USB debugging. After flashing the stock rom back on, I can't seem to get debugging to work again. The USB icon is in the status bar so I know it's charging, but there should be a notification for debugging mode, right?
I'm assuming it's not possible to put the files on the microSD card and then flash the HBOOT on the device itself? (maybe I should post about this in the guide's thread)
EDIT: I should also note that despite being able to set it to disk drive mode, I'm still getting the 'device malfunctioned' message on my PC, so I can't directly transfer files to the SD. I guess that's why debugging isn't working.
Click to expand...
Click to collapse
Have you ever installed HTC Sync or the HTC USB drivers on your PC? Those are the key to getting adb and fastboot working.
tpbklake said:
Have you ever installed HTC Sync or the HTC USB drivers on your PC? Those are the key to getting adb and fastboot working.
Click to expand...
Click to collapse
Yes, I have HTC Sync installed. I also installed the ADB/fastboot files from here, just to be sure. I don't think that would be the problem anyway, since not even Windows is recognizing it.
larryorsomething said:
Yes, I have HTC Sync installed. I also installed the ADB/fastboot files from here, just to be sure. I don't think that would be the problem anyway, since not even Windows is recognizing it.
Click to expand...
Click to collapse
Have you tried another sdcard? This might be a corrupt misc.img. When you used my script, did you have any issues with gold card creation, or have you messed with the Cid in any other way? The script should have made a backup of your original misc partition so it shouldn't be too hard to flash it back, but first you should try flashing another rom, tpbklakes stock rooted rom would be a good one to try unless you have a stock nandroid on your sdcard.
Btw, what recovery are you using? Please include version number.
Nonverbose said:
Have you tried another sdcard? This might be a corrupt misc.img. When you used my script, did you have any issues with gold card creation, or have you messed with the Cid in any other way? The script should have made a backup of your original misc partition so it shouldn't be too hard to flash it back, but first you should try flashing another rom, tpbklakes stock rooted rom would be a good one to try unless you have a stock nandroid on your sdcard.
Btw, what recovery are you using? Please include version number.
Click to expand...
Click to collapse
Sorry, I flashed the stock ROM right before you posted this. I just tried putting in another SD card and it's getting the same error. I'm sure it's the USB port at this port, seeing how I have to position the cable to get it to charge at all, and it's getting harder and harder to position. I'm just hoping for a way to flash the HBOOT on the device at this point.
I think I was using Recovery 5.0.3.0? I installed it from ClockworkMod's Rom Manager. And I didn't mess with the Cid at all, or have problems with the goldcard creation.
larryorsomething said:
Sorry, I flashed the stock ROM right before you posted this. I just tried putting in another SD card and it's getting the same error. I'm sure it's the USB port at this port, seeing how I have to position the cable to get it to charge at all, and it's getting harder and harder to position. I'm just hoping for a way to flash the HBOOT on the device at this point.
I think I was using Recovery 5.0.3.0? I installed it from ClockworkMod's Rom Manager. And I didn't mess with the Cid at all, or have problems with the goldcard creation.
Click to expand...
Click to collapse
Ah well yeah, if you have to physically manipulate the USB cord to get it to charge then its a hardware issue. Warranty will take care of that.
So you're back to s-on, no issues?
Nonverbose said:
Ah well yeah, if you have to physically manipulate the USB cord to get it to charge then its a hardware issue. Warranty will take care of that.
So you're back to s-on, no issues?
Click to expand...
Click to collapse
Well, not yet! I have stock rom working fine, but when I load up the bootloader, it still says Revolutionary, S-OFF. So I'm trying to get it to say FASTBOOT USB while bending the cable around and round etc. It's only flashing to USB a couple of times, and then it says USB Device not recognized on my PC, so I guess it won't work anyway if I get the cable in properly.
larryorsomething said:
Well, not yet! I have stock rom working fine, but when I load up the bootloader, it still says Revolutionary, S-OFF. So I'm trying to get it to say FASTBOOT USB while bending the cable around and round etc. It's only flashing to USB a couple of times, and then it says USB Device not recognized on my PC, so I guess it won't work anyway if I get the cable in properly.
Click to expand...
Click to collapse
To use Fastboot USB mode, the phone should be in Charge Mode, Not Disk Drive mode.
tpbklake said:
To use Fastboot USB mode, the phone should be in Charge Mode, Not Disk Drive mode.
Click to expand...
Click to collapse
I'm having trouble even getting the option to change that now, but shouldn't I be in the bootloader if I want to be using fastboot?
Also, I should probably specify that this is the stock ROM I flashed:
http://www.filefactory.com/file/c0a...5AU_3805.04.03.12_M_release_185029_signed.exe

Help Plz! USB not working, is it possible to restore stock?

So about two nights ago I noticed my phone wasn't taking a charge and eventually died. Once the phone was powered off it charges fine but turn it on and no more charging or connect to PC. So I've been searching for a solution since then as this would seem to be a software issue but nothing I have done has made a bit of difference. Now I want to bring the device back to 100% stock to either start fresh or make an exchange with T-Mobile.
Every way to restore to stock required fastboot & adb which obviously I cannot do since I cannot connect to PC. Please share any insights or at the very least steer me in the direction of the light. Thanks
mcallender5 said:
So about two nights ago I noticed my phone wasn't taking a charge and eventually died. Once the phone was powered off it charges fine but turn it on and no more charging or connect to PC. So I've been searching for a solution since then as this would seem to be a software issue but nothing I have done has made a bit of difference. Now I want to bring the device back to 100% stock to either start fresh or make an exchange with T-Mobile.
Every way to restore to stock required fastboot & adb which obviously I cannot do since I cannot connect to PC. Please share any insights or at the very least steer me in the direction of the light. Thanks
Click to expand...
Click to collapse
First, if you can boot into android, download a zip of your stock from your phone and flash it through recovery. If you can't do that, see if you have another micro usb cable, try connecting it to your phone and pc and see if that works. If not, cycle through your boot modes connected to pc (bootlader, android -if possible-, and recovery). Do you hear any sounds from your pc that indicate something is connected to it? Especially important for recovery to stock. If you hear a sound when you boot into recovery, you can flash the stock RUU or zip to get your phone back to stock. Next, disconnect phone from your pc, uninstall htc sync and all drivers for the phone. Reconnect the phone to your pc after that, and if it boots to android, it should reinstall sync and drivers automatically. Aside from this, the only other thing I can think of would be an exchange due to faulty usb. Hope this helps. I've included a couple of links to your stock RUU and zip (I'm assuming your T-mobile US). I hope this helps. -Mike
T-Mobile stock nandroid zip (Note: You need CWM for this)
T-Mobile stock RUU (It's an .exe you run with the phone connected to pc in recovery. Scroll to the bottom for the download. You need stock recovery for this)
I hope this helps.
Mike
One more thing: You got lucky no one flamed you for posting a question in the general thread. Next time you should post a question in the Q&A thread. Not everyone is as nice as me around here.
hi. i'm having the same issue on att variant... reported in depth here:
http://forum.xda-developers.com/showthread.php?t=2408656&nocache=1

Phone in USB Host Mode

Hello!,
I got my phone into a weird situation, every time I try to connect to my PC, it's saying "Phone is in USB host mode", the PC tries to recognizes and nothing happens, after that the phone won't charge and stays like that until I rebooted, I can charge it with the original charger after this.
My device:
HTC One AT&T 32GB
ROM: ARHD 41.0
I also tried this method with no results: http://forum.xda-developers.com/showthread.php?t=2481211
Anyone with this situation too?
lumogox said:
Hello!,
I got my phone into a weird situation, every time I try to connect to my PC, it's saying "Phone is in USB host mode", the PC tries to recognizes and nothing happens, after that the phone won't charge and stays like that until I rebooted, I can charge it with the original charger after this.
My device:
HTC One AT&T 32GB
ROM: ARHD 41.0
I also tried this method with no results: http://forum.xda-developers.com/showthread.php?t=2481211
Anyone with this situation too?
Click to expand...
Click to collapse
You mean it's showing up as QHSUSB_DLOAD in Device Manager?
Unfortunately that would indicate a hard brick, no fix, as far as I am aware of.
Welcome to the group of unfortunate people.
I guess the best option would be to send it back for warranty repairs, mine is the same and I'm 99.99% sure it has to do with the charging port.
Unfortunately for me I'm out of the US so warranty shipping is not an option at the moment.
There are other threads about this problem, but so far the only ones I heard that solved this problem was by repair or replace.
You mean it's showing up as QHSUSB_DLOAD in Device Manager?
Unfortunately that would indicate a hard brick, no fix, as far as I am aware of.
Click to expand...
Click to collapse
No, it's not bricked it works ok but only charges through wall charger and if you plug it up to a pc it gets into "USB Host Mode" and then you have to reboot to be able to charge from the wall charger.
My HTC showed the same message. Saying it can not charge into host mode.
HTC only charges powered off.
ferincr said:
Welcome to the group of unfortunate people.
I guess the best option would be to send it back for warranty repairs, mine is the same and I'm 99.99% sure it has to do with the charging port.
Unfortunately for me I'm out of the US so warranty shipping is not an option at the moment.
There are other threads about this problem, but so far the only ones I heard that solved this problem was by repair or replace.
No, it's not bricked it works ok but only charges through wall charger and if you plug it up to a pc it gets into "USB Host Mode" and then you have to reboot to be able to charge from the wall charger.
Click to expand...
Click to collapse
Indeed man, same situation here, I'm actually in Colombia, so not an option to send it, as I can't go back to factory settings without connecting it to the PC.
@nkk71 The device is fully functional, it's just not getting detected on my pc.
lumogox said:
Indeed man, same situation here, I'm actually in Colombia, so not an option to send it, as I can't go back to factory settings without connecting it to the PC.
@nkk71 The device is fully functional, it's just not getting detected on my pc.
Click to expand...
Click to collapse
What Windows version you running?
but be careful, QHSUSB_DLOAD mode is a brick... sooner or later
maybe best to get yourself an ubuntu live usb, and check adb and fastboot connections there. you can use this guide by @tobesedated to create a Live USB http://forum.xda-developers.com/showthread.php?t=2606577
maybe it's just bad/outdated windows drivers.
nkk71 said:
What Windows version you running?
but be careful, QHSUSB_DLOAD mode is a brick... sooner or later
maybe best to get yourself an ubuntu live usb, and check adb and fastboot connections there. you can use this guide by @tobesedated to create a Live USB http://forum.xda-developers.com/showthread.php?t=2606577
maybe it's just bad/outdated windows drivers.
Click to expand...
Click to collapse
I try with 3 different versions of Windows, on my jobI got Win 7, Win XP, and at home Win 8, same issue for all.
nkk71 said:
What Windows version you running?
but be careful, QHSUSB_DLOAD mode is a brick... sooner or later
maybe best to get yourself an ubuntu live usb, and check adb and fastboot connections there. you can use this guide by @tobesedated to create a Live USB http://forum.xda-developers.com/showthread.php?t=2606577
maybe it's just bad/outdated windows drivers.
Click to expand...
Click to collapse
lumogox said:
I try with 3 different versions of Windows, on my jobI got Win 7, Win XP, and at home Win 8, same issue for all.
Click to expand...
Click to collapse
Steps 8-15 of my guide show how to set up adb/fastboot in Ubuntu 32bit and to check if your device is recognized. You don't have to install Ubuntu just select to try it. I think that's what scares everyone off, is thinking they have to install the OS...It seems like a lot of work but it really isn't and compared to what you've gone through, it can't hurt....good luck
lumogox said:
I try with 3 different versions of Windows, on my jobI got Win 7, Win XP, and at home Win 8, same issue for all.
Click to expand...
Click to collapse
Win 7 and XP are pretty much OK with any drivers & hboot & firmware/rom, but what is it exactly showing you when you say "USB Host Mode"?
Have you considered uninstalling everything with HTC.... in control panel, and installing newer version: http://forum.xda-developers.com/showthread.php?t=2089508
then see if you get MTP (Media Transfer Protocol) working again.
USB Host Mode (as in Qualcomm High Speed USB Download Mode) is NOT a good sign! it's a brick about to happen.
maybe try changing the cable you are using to your PC!!!
EDIT: and make sure you're phone's USB port is not dirty or similar
nkk71 said:
Win 7 and XP are pretty much OK with any drivers & hboot & firmware/rom, but what is it exactly showing you when you say "USB Host Mode"?
Have you considered uninstalling everything with HTC.... in control panel, and installing newer version: http://forum.xda-developers.com/showthread.php?t=2089508
then see if you get MTP (Media Transfer Protocol) working again.
USB Host Mode (as in Qualcomm High Speed USB Download Mode) is NOT a good sign! it's a brick about to happen.
maybe try changing the cable you are using to your PC!!!
EDIT: and make sure you're phone's USB port is not dirty or similar
Click to expand...
Click to collapse
1. "Phone is in USB mode" appears as a notification on the phone when plugged to the computer.
2. Installed 3 different ROMs with the same result, uninstall everything, and nothing.
3. Don't know how to get back MTP.
4. Brick??
5. I try to charge it, but same thing happens.
6. Clean the port, and nothing.
lumogox said:
1. "Phone is in USB mode" appears as a notification on the phone when plugged to the computer.
2. Installed 3 different ROMs with the same result, uninstall everything, and nothing.
3. Don't know how to get back MTP.
4. Brick??
5. I try to charge it, but same thing happens.
6. Clean the port, and nothing.
Click to expand...
Click to collapse
let's take this down a notch, we dont care what your phone says, we care what shows up in Windows 7 Device Manager (or XP, maybe even Win8):
for example
I really haven't explored what steps are needed to get it back to stock, but mine connects to the pc as long as it's in bootloader so I can flash stuff like Fw but nothing that need to get into the sd card. (as far as I know).
nkk71 said:
let's take this down a notch, we dont care what your phone says, we care what shows up in Windows 7 Device Manager (or XP, maybe even Win8):
for example
Click to expand...
Click to collapse
Well, it's says nothing... doesn't appear anymore on Win 7 devices.
Try cleaning your USB ports?
Sent from my HTC One using Tapatalk
n1234d said:
Try cleaning your USB ports?
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I'm thinking this a port issue, is damage somehow, however, I hope to find a software solution.
New Firmware
Phone that was purchased was not recognized by my computer in recovery and was locked with no S-Off and did not have a Super CID, but assuming that you have all of those things already and are developing these issues then I would try updating the firmware. For some reason, after flashing the 5.11.1540.9 firmware from http://forum.xda-developers.com/showthread.php?t=2485651 and updating to ARHD 71.1 the charging issue all has seemed to disappear. If anyone wants the full run down of how I got from my original non-functioning and unrecognized phone to where it is now I can put in details, but as far as I can tell the issue is just with the firmware if you find yourself being able to intermittently charge in different scenarios when it is off.
Loading New Firmware
Also, for some reason, computer would not recognize phone with TWRP recovery yet I could push files through adb when using CWM recovery. So what happened for me was loading up CWM and pushing the files that I needed into the data folder and flashing TWRP to then install it or rebooting the phone as normal and finding the file with something like a root file explorer. I feel like I may not be very clear with this so post if there needs to be more clarification.
it's a strange issue ,i think it is a hardware problem,happen to me and i try everything possible,without success,than i charge phone when power of and it was the only way ,but led was flashing so it was intermittent charging,i was able to charge only to 97%..i use my phone and somehow next day i was able to charge phone,but then problem occur again...and wired thing is that fastboot devices list is not empty but adb devices list is empty,so phone is not fully recognized by computer,and i forgot to say that day when i was able to charge phone,adb command worked...that day i flashed firmware recovery and rom again ,because i thought it will resolve the problem...
---------- Post added at 11:35 PM ---------- Previous post was at 11:23 PM ----------
ricehoshi said:
Phone that was purchased was not recognized by my computer in recovery and was locked with no S-Off and did not have a Super CID, but assuming that you have all of those things already and are developing these issues then I would try updating the firmware. For some reason, after flashing the 5.11.1540.9 firmware from http://forum.xda-developers.com/showthread.php?t=2485651 and updating to ARHD 71.1 the charging issue all has seemed to disappear. If anyone wants the full run down of how I got from my original non-functioning and unrecognized phone to where it is now I can put in details, but as far as I can tell the issue is just with the firmware if you find yourself being able to intermittently charge in different scenarios when it is off.
Click to expand...
Click to collapse
And do have same problem again after flashing new firmware?
The phone was a gift for my dad and it has been running fine since my last post. No charging issues and the phone does not go into host mode randomly anymore.
Well i also had the same problem...but i did factory reset on the phone and flashed it to completly stock ...and since then no problem..
Sent from my HTC One using XDA Free mobile app

Categories

Resources