I accidentally bricked my phone, and now connected to the computer will display QSHUSB_DLOAD mode.
I have also tried to hold the power button for 10 seconds after the restart, but without any help.
I also try to repair the phone via QPST, but i don't have the hex and mbn files.
Could someone help me to dump these files?
or tell me how to dump it from a normal phone?
Thank you for your help.
Search for hard brick in these forums. See if there's a recovery tutorial. I doubt you'll have a lot of luck though, sorry!
Sent from xda premium app on ViperOne
I have heard of Ones in QHUSB_DLOAD mode spontaneously rising from the dead, but I'm not sure anyone has actually repaired one.
It was possible on the One XL via jtag, but this phone is a lot harder to take apart. There are repair shops that can do it.
Afaik we don't have the required program to flash in download mode
Sent from my HTC6435LVW using xda app-developers app
123421342 said:
Afaik we don't have the required program to flash in download mode
Click to expand...
Click to collapse
jtag works by flashing firmware directly onto the motherboard, but that's a lot harder with this phone, which is sealed.
Related
I cannot get phone to do ANYthing...no boot into download, no recovery boot, no phone!computer symbol, NOTHING...is it possible I throughly bricked it? Please someone say no
U tried holding down vol up and down while plugging in the usb already connected to pc?
Sent from my SAMSUNG-SGH-I897 using XDA App
Mrpotato00 said:
U tried holding down vol up and down while plugging in the usb already connected to pc?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
This.
I had the same issue and thought I had bricked it... If you plug the USB cable into the computer but not into the phone, then pull the battery out of the back, wait 30 seconds, put the battery back in and put the cover on, hold down both buttons at the same time and while holding them, stick the micro part of the SD cable into the phone, it boots into download mode.
tried both these, and a couple other combos i've found and nothing works.
Have you tried the 300k/301k/302k ohm USB jig?
norcal einstein said:
Have you tried the 300k/301k/302k ohm USB jig?
Click to expand...
Click to collapse
It worked for me and so easy to make. Here is the link http://forum.xda-developers.com/showthread.php?t=819551
norcal einstein said:
Have you tried the 300k/301k/302k ohm USB jig?
Click to expand...
Click to collapse
um...could you point me to what you mean?
Original Thread:
http://forum.xda-developers.com/showthread.php?t=819551
"Solderless" Version of Jig w/ Pictures:
http://forum.xda-developers.com/showthread.php?t=841512
How many times must it be said?!?!?! QUESTIONS GO IN THE Q&A SECTION! there are posts like this every single day in the development section. Does anybody ever learn (or know how to use the search feature?)?!
tdbgamer said:
How many times must it be said?!?!?! QUESTIONS GO IN THE Q&A SECTION! there are posts like this every single day in the development section. Does anybody ever learn (or know how to use the search feature?)?!
Click to expand...
Click to collapse
Some people find it easier to explain their own problems than to read through others' problems to determine their fix. If you don't have the desire to help me out, then don't post in this thread. Your thoughts on how this forum could be improved aren't contributing to the fix of my phone so why bother?
I have the same problem. JIG doesn't help at all. BTW, I made two cable and tested on a working captivate. the JIG cable does work. It's just not working on the complete-bricked phone.
I tried any method I could find on the forum and nothing works. I don't even know how a successful flash (reported by ODIN) and the phone reboot itself and then complete dead after that.
so if I filed a claim for insurance no one be the wiser about me having unauthorized software on my phone?
bunnsguy said:
I cannot get phone to do ANYthing...no boot into download, no recovery boot, no phone!computer symbol, NOTHING...is it possible I throughly bricked it? Please someone say no
Click to expand...
Click to collapse
Do. You get atnt screen? Or just black screen? Does your computer recognize your phone? If your computer reconize your phone pm me I will help you.
Sent from my T-Mobile G2 using XDA App
PowerPC said:
I have the same problem. JIG doesn't help at all. BTW, I made two cable and tested on a working captivate. the JIG cable does work. It's just not working on the complete-bricked phone.
I tried any method I could find on the forum and nothing works. I don't even know how a successful flash (reported by ODIN) and the phone reboot itself and then complete dead after that.
Click to expand...
Click to collapse
dude you got any luck?
same situation here....
bunnsguy said:
I cannot get phone to do ANYthing...no boot into download, no recovery boot, no phone!computer symbol, NOTHING...is it possible I throughly bricked it? Please someone say no
Click to expand...
Click to collapse
If your phone shows absolutely no sign of life whatsoever, then something may have killed the hardware. You didn't say what you did to cause the hard bricking. Were you flashing a ROM?
Sent from my SAMSUNG-SGH-I897 using XDA App
Happened to me when I first flashed the official OTA update. It stopped mid download and tried to apply the update. Phone was completely dead and had to get it replaced...
Sent from my SAMSUNG-SGH-I897 using XDA App
I believe I just bricked my captivate by flashing Congnition 2.3b6 ROM. I've already tried all methods mentioned in this forum (key combinations, usb jig...) but no way can put my phone into download mode. Now my phone has become a brick, no boot, only black screen no matter what I do to it. I think the only way to recover it is JTAG.
So I need help from someone (better in CA) who have RIFF Box (or some other JTAG devices) and have some experiences on rescue a dead Captivate. If you can help me recover it, I'm glad to pay for your help.
PM me if you can do it. Thanks a lot!
Have you confirmed that your JIG is working properly? (~300kohms of resistance) And that you aren't touching any exposed metal on the JIG when using it? (since that will change the resistance)
I'm not sure because I don't have a solder in hand so I have to twist the wires together. But I'm sure my hand has no way to touch the exposed part because I'm wearing latex gloves when pluggin it in.
I heard that it is really easy to brick the captivate if you flash cognition without reverting to JF6. Maybe I use the wrong PDA file in accident when I flash JF6 with odin before flashing the Cognition.
Still looking for some help from a riff-box user....
Search odin3 I believe its jh6. Its a one click. Make sure you have all the drivers. And don't use the stock 2.2 those suck. Get a froyo rom. Anyways put your phone into download mode. Take out battery plug in the usb open the odin3. Press volume up and down and power. Insert the battery and release the power button. let the drivers install and a com 4 or com 5 doesn't matter what number it is after the com. Press download now. works like a charm.
Sent from my GT-I9000M using XDA App
Sent from my GT-I9000M using XDA App
yes, it should be jh6. I've downloaded that one-click package but right now there is not any response when I connect my phone with computer and no way to enter download mode as I described before. I believe JTAG is the only choice for me. So anybody know someone who can provide these kind of services? I appreciate for your help.
Did you try this button combo?
Sent from my GT-I9000M using XDA App
Got a similar situation was flashin back to stock my sis phone and odin was almost done and went to a blue screen aftrer thirty mins pulled batt and now dead wtf
Sent from my SAMSUNG-SGH-I897 using XDA App
Okay guys, I DESPERATELY need your help here.
I was flashing a rom through ODIN, when ODIN became unresponsive and closed on me.
Now, the handset is completely unresponsive.
What can I do to fix this?!
Please help, otherwise my Dad is going to kill me.
Can you get to download mode? Remove battery for a while and then try entering download mode again
Tapatalking in my sleep
ryandabao said:
Can you get to download mode? Remove battery for a while and then try entering download mode again
Tapatalking in my sleep
Click to expand...
Click to collapse
Can't access download mode.
Leaving battery out now for 10 minutes.
Will post response after
New_World_Order said:
Can't access download mode.
Leaving battery out now for 10 minutes.
Will post response after
Click to expand...
Click to collapse
Hi. Which phone is this?
Sent from my GT-P1000 using Tapatalk
agustincordoba said:
Hi. Which phone is this?
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Samsung Galaxy S
Battery back in.
Phone still unresponsive.
You can still force the phone into DL mode by using a JIG. Have you tried that?
JIGs can be bought on Amazon or you can just build one yourself.
http://forum.xda-developers.com/showthread.php?t=819551
BTW: What happens, if you connect it to your PC via USB?
Did you have the proper drivers installed on your pc for your galaxy s?
Tapatalking in my sleep
BlueFlame4 said:
You can still force the phone into DL mode by using a JIG. Have you tried that?
JIGs can be bought on Amazon or you can just build one yourself.
http://forum.xda-developers.com/showthread.php?t=819551
Click to expand...
Click to collapse
This is looking like my only option.
I'm going to have to buy one :/
New_World_Order said:
This is looking like my only option.
I'm going to have to buy one :/
Click to expand...
Click to collapse
You can also build one if you are used to soldering. It's not that hard Anyways seems as if your problem can't be solved within a minute. If you have a local shop that sells electronic stuff, you can go and search for the parts needed to build that JIG It's nearly impossible to COMPLETELY brick your phone, so I guess this method will work!
Best Regards!
BlueFlame4 said:
You can also build one if you are used to soldering. It's not that hard Anyways seems as if your problem can't be solved within a minute. If you have a local shop that sells electronic stuff, you can go and search for the parts needed to build that JIG It's nearly impossible to COMPLETELY brick your phone, so I guess this method will work!
Best Regards!
Click to expand...
Click to collapse
Hahaa I'm useless with things like that, I wouldn't want to do any more damage, I'll just buy one!
Thanks a lot mate
Jig should work just fine, I know from hard experience! Strange that the three-button method does not get you into dl-mode.How did you originally enter download? Through the three button method or from some reboot option? And which Android version/build were you attempting to replace?
Sent from my GT-P1000 using Tapatalk
agustincordoba said:
Jig should work just fine, I know from hard experience! Strange that the three-button method does not get you into dl-mode.How did you originally enter download? Through the three button method or from some reboot option? And which Android version/build were you attempting to replace?
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
If you manage to really brick the device, I reckon that download mode can also become broken.
JIG May Solve ur Problem Bro'
Waiting for a jig to come in the post. If not I'll just claim it on insurance and get a new one.
Sent from my GT-I9100 using XDA
The jig should work mate the galaxy s series are virtually impossible to completely "brick". once u get your jig remove your battery for a minute then put it back together and use the jig to get into download mode... since ur phone is completely unresponsive it means there is no firmware or rom on your phone so u will have to start from scratch and install a 3file rom and then a cf+root. Then u will be sweet to start flashing your rom's through recovery mode much easier than dealing with odin. Hope this helps mate
Sent from my GT-I9000 using xda premium
Minnaz said:
The jig should work mate the galaxy s series are virtually impossible to completely "brick". once u get your jig remove your battery for a minute then put it back together and use the jig to get into download mode... since ur phone is completely unresponsive it means there is no firmware or rom on your phone so u will have to start from scratch and install a 3file rom and then a cf+root. Then u will be sweet to start flashing your rom's through recovery mode much easier than dealing with odin. Hope this helps mate
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
That's a huge help mate, thanks a lot! The jig should arrive within the next two days, so fingers crossed!
Sent from my GT-I9100 using XDA
I wasn't paying attention and I messed up. I was planning on flashing AllianceROM to the latest version, and without thinking I downloaded the zip file and started to flash. In the middle of the process, my phone shut off suddenly, and now it won't even turn on. I plug it in and the computer doesn't register anything.
I realized that I flashed it with this: http://forum.xda-developers.com/gal...lliancerom-v9-available-changelog-op-t2037363, which is for the Galaxy S2.
Have I completely messed up? Is this phone basically irreparable? I can't go into safe mode or anything like that. And I've obviously voided the warranty...
If you can't get into Odin mode or Recovery, then yes, unfortunately you bricked it.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
*FaNDroID* said:
If you can't get into Odin mode or Recovery, then yes, unfortunately you bricked it.
Click to expand...
Click to collapse
Would it be "fixed" if I got the motherboard replaced? How about jtagging or usb jig?
I should still be under warranty but Samsung says I need proof of purchase even though they know the purchase date. I seem to have misplaced the receipt and it's making me want to tear my hair out because they're basically avoiding having to help me. (I understand this was my fault but they're blatantly saying I have no warranty.)
Probably need a new motherboard. If you can't get it to power up at all.
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
*FaNDroID* said:
Probably need a new motherboard. If you can't get it to power up at all.
Click to expand...
Click to collapse
How much would it cost me to get a new one, and where could I get one?
Or would it be cheaper to make an appointment at SoHo Samsung Studio and have them repair it for me?
Don't know, personally I'd try and find a busted s5 on eBay. One with a broken screen and clean IMEI
Sent from my SAMSUNG-SM-G900A using XDA Free mobile app
Have you tried to see if it will boot from Ext-SD? I've heard of a few successful hard brick recoveries from this method.
http://forum.xda-developers.com/showthread.php?t=2476353
http://forum.xda-developers.com/showthread.php?t=2834419
nutt_case said:
Have you tried to see if it will boot from Ext-SD? I've heard of a few successful hard brick recoveries from this method.
http://forum.xda-developers.com/showthread.php?t=2476353
http://forum.xda-developers.com/showthread.php?t=2834419
Click to expand...
Click to collapse
Thanks for the reply! These are for different phones though. And where would I find this unbrick image?
senoppai said:
Thanks for the reply! These are for different phones though. And where would I find this unbrick image?
Click to expand...
Click to collapse
It can be done for the g900a you just gotta find a debrick image. There was one in this thread but not sure if it's still active or not.
http://forum.xda-developers.com/showthread.php?t=3085344
nutt_case said:
It can be done for the g900a you just gotta find a debrick image. There was one in this thread but not sure if it's still active or not.
http://forum.xda-developers.com/showthread.php?t=3085344
Click to expand...
Click to collapse
I read a bit into the threads and one person said that if the computer won't even recognize it then I probably am out of luck? Is this true?
Edit: I tried using Win32DiskImager, and it did not work. I press the power button and it wont turn on, and as usual the computer wont recognize it.
senoppai said:
I read a bit into the threads and one person said that if the computer won't even recognize it then I probably am out of luck? Is this true?
Edit: I tried using Win32DiskImager, and it did not work. I press the power button and it wont turn on, and as usual the computer wont recognize it.
Click to expand...
Click to collapse
Not sure about the computer....i think it usually shows QHUSB_BULK when hard bricked...again not sure though.
If it's not powering on with a properly flashed debrick SD card then your probably going to need jtag or new board.
Does anybody or can any body get me a scatter file ? Seeing as how its hard bricked and dead to the world I cant try to resurrect it without one. Maybe a 900a may work if they are close enuff.
hey can someone that has a 870 active please use sp flashtool and create me a scatterfile/? i hardbricked mine . need this scatterfile to bring it back up to life. if you need more info about it just let me know. it just reads memory locations so it can map them to flash certain files back to them , need it to recover the bootloaders sections. its like a pit file for odin it just flashes without it being in download mode.
Some help would be nice uh, Hi^~^
OK mate I've get away from modding my phones from 2 years now but if you guide me throughout the process I'll give you the file you need a g870a here ~ text me or whatever you want to [email protected] English or Spanish is welcome
captivated1971 said:
hey can someone that has a 870 active please use sp flashtool and create me a scatterfile/? i hardbricked mine . need this scatterfile to bring it back up to life. if you need more info about it just let me know. it just reads memory locations so it can map them to flash certain files back to them , need it to recover the bootloaders sections. its like a pit file for odin it just flashes without it being in download mode.
Click to expand...
Click to collapse
did you end up getting the scatterfile?
Oh I fixed it a while back. By the way our phones are almost unbrickable as long as its just software related. I mean I hardbricked it and got it from no lights sounds or even charging screen, I mean nothing so if you happen to do that it's still fixable, and I have all the files to recover it.
Sent from my SM-G900F using XDA-Developers mobile app
sultanmurad said:
did you end up getting the scatterfile?
Click to expand...
Click to collapse
Nope something better
Sent from my SM-G900F using XDA-Developers mobile app
any recommendations on a soft bricked SM-G870A, stuck at the at&t logo.
There's alot you can do for that if you are rooted its simple if not then you have to go back to stock firmware. Depending on what you we're on and trying to do
Sent from my SM-G900F using XDA-Developers mobile app
well my phone started out as a soft brick and now its fully bricked. was able to get into safe strap and i tried to flash a rom to slot 1 and it bricked my phone. Nothing pops up the only sound i get from it is when i connect it to my pc.
Help needed
captivated1971 said:
Oh I fixed it a while back. By the way our phones are almost unbrickable as long as its just software related. I mean I hardbricked it and got it from no lights sounds or even charging screen, I mean nothing so if you happen to do that it's still fixable, and I have all the files to recover it.
Sent from my SM-G900F using XDA-Developers mobile app
Click to expand...
Click to collapse
Need those file to restore g870a. Can you please provide them somehow?
can you please share those files and the method please?