Hello,
Sorry for my first post to be a question but I just can't get this to work.
I have managed to get the "throw" function working for music. I cannot get video to work though, only the sound plays when I throw a video to the pc.
Also, when I throw a picture from the album on the phone it doesn't do anything at all.
I'm sure I'm missing something here.
I have downloaded the latest bluetooth drivers for my motherboard (Asus p8z68-v pro gen 3).
In device manager I still have a yellow exclamation mark next to 5 (?) items in "Other Devices > Bluetooth Peripheral Device"
The bluetooth symbol in device manager is listed as "Bluetooth Radios > ASUS Bluetooth" and "Bluetooth Radios > Microsoft Bluetooth Enumerator"
I'm a little confused here as I know I'm not getting all the bluetooth features.
I have taken screenshots of what I'm talking about, hope this helps!
Thankyou
(Screenshots put into one image)
Anyone? I thought somebody would have some insight on here... : (
Bluesolei
Gesendet von meinem Xperia SP
Related
Attached is a little program that will prevent the Toshiba BT stack (in laptops) from only connecting to headphones that support SCMS-T. I.e. all A2DP sink devices should now work.
Whytey
The thread on http://www.MTekk.com.au where the topic began for reference.
http://www.mtekk.com.au/forums/viewtopic.php?t=7862
Whytey
SCMS-T - Am I missing something?
Downloaded and ran the patch yet nothing. How fo I know it's worked?
Same problem - no change to BT headphone prob
Just an FYI, I'm also running into the same problem. Tried running SwitchTosSCMSCheck on top of Toshiba's bluetooth stack versions 3.20 and 4 without effect. (Rather than getting the SCMS error message, I get a more generic error message when trying to pair.) I noticed that the registry entries cited in the original thread weren't found during a search of my registry with either version installed ... wondering if Toshiba has tweaked to defeat this fix in the newer version.
Did some surfing on a related thread regarding BT on a Sony TR1 (which uses the same Toshiba stack but has the option to ignore SCMS). This isn't a hack because the software comes with that option enabled. (In fact, the SONY folks were hacking it to make it work with non-Toshiba products.) However, it installs very simply on my Toshiba M200
Link: http://www.drinnan.com/sw/A5_Bluetooth.zip
... replaces the BT 'antenna' with a more traditional BT symbol, but opens up into the Toshiba BT interface. Once installed, go into Options and make sure the SCMS checkbox is deselected.
This is a good fix but a short-term one. The software is evaluation only, and expires after 30 days. (There didn't seem to be an easy workaround for this.)
Re: SCMS-T - Am I missing something?
mattbatt said:
Downloaded and ran the patch yet nothing. How fo I know it's worked?
Click to expand...
Click to collapse
You need to run it while you're making a new connection, just before you would usually get the error message you run the exe and click next in the usual new connection wizard.
Thanks, Thats much better now
Thanks for this fix. I bought a Moto HT820 headset to use with my PDA/phone, which initially did not support it as the carrier chose to remove A2DP from it, but I added it back and it is great. Also I wanted to use it with my Toshiba bluetooth stack that I had to install in my Sony laptop because Sony did not support bluetooth headset of any kind and Toshiba hit the copywrite barrier, but this utility fixed that nicely, thanks. My other laptop does not support the HT820 at all either, just blows it the same lo-fi like it is a HS820, so off to mess with the stack for it. My point being that it is nice that there are people out there that can make up the slack when the big companies dangle these nice options in front of us and then snatch them back and say we can not have them. Thanks again for the save.
Hi..
thanks djwhyte.I made the downloading of the file and works well.I have Pc Toshiba M100 end BT Siemens HHB-750.
Thanks A Lot ! Patch Works Perfectly
You're the best.
Sincerly
Thanks!
Worked for me too. Thanks a heap.
And screw you to Toshiba for making the problem in the first place.
The tech's at toshiba gave me the link for the patch (SCMS-T) but for some reason XDA will not let me download it. Please help
ssmith7488 said:
The tech's at toshiba gave me the link for the patch (SCMS-T) :
Click to expand...
Click to collapse
HAHAHA! It's good to know that toshiba's tech support is on top of things!
When I try to run the .exe it does not work
I try to run the software but it does not do anything I have stack v4.00.36. Any help?
toshiba (europe) released v5 of the bt stack, it has option to disable scms-t built in...
which is great, but my headphones still lose connection (i rode the short bus to school)
Windows XP+S9+A2DP
Thankyou very much for this fix, it works great.
m400 BT stack v5+vista+S9
no joy
program wont even show in the
process/services when i look at the task manager...
vista problem? (another!!!?)
BT stack 5.10.12 upgrade the answer?
trying it now, if i dont come back- dont use it :
upgrade is legit
get it at
http://aps2.toshiba-tro.de/bluetooth/pages/download.php
simple- no need to do anything other then installing
Thanks whytey, I placed the switch on the desk top & it works well with my blue ant
speakers.
Double thanks ok.
for everyone who is confused by this scms-t..
you need to run the switchtosscms right before pairing your devices..
for me, i rand the .exe everytime it went for the next step.. even when its connecting..
toshiba protege m400..
hope this helps.. because it was confusing for me..
the sony A5 thing is junk...
Guys,
Where can i get a bluetooth stack that have A2DP stack on it so that i can use it on my stereo bluetooth headset for audio....
Try this
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
In combinbation with bt 1.0.0.3900
ftp://xda:[email protected] Upgrades/BroadcomCorp_BT1.0.0.3900.cab
Works fine on my pda.
I tried the first cab and it broke my today screen! The wallpaper is black behind PocketBreeze and scrambled behind iLauncher. Weird. Soft reset doesn't help.
I already had BT 3900 so I didn't use the second cab.
Oh wait, today screen problem solved! I switched wallpapers and then switched back to the original, it's fine now. I'll submit this post anyway for reference if it happens to someone else.
Anyway, the A2DP profile is there all right, so thanks Vastloper!
thanks. but the link seems not working....
my fault
it works now
I tried the 1st link, but it made no difference.
how to check if I managed to have a2dp profiles on my sx66?
Robrecht said:
I tried the first cab and it broke my today screen! The wallpaper is black behind PocketBreeze and scrambled behind iLauncher. Weird. Soft reset doesn't help.
I already had BT 3900 so I didn't use the second cab.
Oh wait, today screen problem solved! I switched wallpapers and then switched back to the original, it's fine now. I'll submit this post anyway for reference if it happens to someone else.
Anyway, the A2DP profile is there all right, so thanks Vastloper!
Click to expand...
Click to collapse
In Bluetooth Manager, select "new connection". There should be a new option in the list called "High quality audio". Use that to connect to your headset.
Did you download the .cab file and run it on your device? You have to download it, copy it to your pocket pc and run it by tapping on it in file manager. If you did all this and still don't have the High quality audio option, I have no idea what could be wrong.
By the way, once you've managed to install the patch: if you have a ROM version with Windows Media Player 10, you may want to read this thread.
link broken
Link seems to be broken,......
link broken
Link seems to be broken,......
links are working just fine for me.
ty for the lil tut.
It worked perfectly, in my configuration menu, i have the high quality option.
Anyone had trouble actually making an A2DP connection work with these mods?
The A2DP profile is there, and seems to have all the right stuffs, but actually making it connect to my earphones (sony DR-BT20NX) is proving an issue.
Thus far ive only managed a normal HSP hands free style connection.
Such a waste.
Andrewcheese said:
Anyone had trouble actually making an A2DP connection work with these mods?
The A2DP profile is there, and seems to have all the right stuffs, but actually making it connect to my earphones (sony DR-BT20NX) is proving an issue.
Thus far ive only managed a normal HSP hands free style connection.
Such a waste.
Click to expand...
Click to collapse
Same here:
Blue Angel to JVC KD-BT1 carstereo:
Nothing but "connection error" (Have'nt tried your HSP connection, though)
Awesome!
Thanks, this worked like a charm although I did have to perform a Hard Reset first. I can now listen to stereo sound through my Oakley O Rokr sunglasses and use my hands-free headset.
XV6600 Verizon
I downloaded and installed
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
which gives me the High Quality Audio profile. However, I only get sound when playing music through Media Player. All other sounds (system sounds, telephone, sounds from games) are muted. Am I doing anything wrong?
Zippy1970 said:
I downloaded and installed
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
which gives me the High Quality Audio profile. However, I only get sound when playing music through Media Player. All other sounds (system sounds, telephone, sounds from games) are muted. Am I doing anything wrong?
Click to expand...
Click to collapse
Anyone? (bump)
licence expired
I installed it, and all I got it this
"Sorry! Bluetooth can no longer be used because the licence is expired.
BDA: 00:09:2D:30:5A:98
KEY: E3E53E19B3E8214C543A73C0A8B9A074DD3B1753515CD8"
I hit ok, and it turns my bluetooth off.
why? I just want to find a blue tooth that has AD2P that doesn't need me to upgrade as I don't have some of the buttons working to get into bootload mode.
please can i have some help
Bluetooth expired for A2DP - Serial com for BT-GPS never worked after
mmci1525 said:
I installed it, and all I got it this
"Sorry! Bluetooth can no longer be used because the licence is expired.
BDA: 00:09:2D:30:5A:98
KEY: E3E53E19B3E8214C543A73C0A8B9A074DD3B1753515CD8"
I hit ok, and it turns my bluetooth off.
Click to expand...
Click to collapse
Same for me.
Furthermore ever since the update to A2DP my BT-serial com connection to my BT-gps-mouse couldn´t be established anymore.
Any help? NEWER - BETTER A2DP update?
ok so i have an htc p4000 and i recently bought a scosche bluetooth receiver kit and i'm able to produce some sound but its not high quality. i checked and my phone does support the A2DP service but it sound like my device is outputting sound for headphones and not normal speakers. i used both the cabs you put on here and they are functioning but it says that my bluetooth is off in it. my dad has an ipaq and the bluetooth manager on his phone seems to pick up my scocshe perfectly and is perfectly able to play. anybody know where i can find that bluetooth manager? thanks for the help if you can help
Hope this help:
http://forum.xda-developers.com/showthread.php?t=274425
I'm trying to connect my phone (ATT HTC Tilt) with a stereo bluetooth headset or trying to send files and everytime I scan for new devices it gives me an error stating "PROBLEM WITH BLUETOOTH HARDWARE"
Additionally, the "Turn on Bluetooth" option always turns off automatically....
What is going on? Can anyone help?
Please...
Anyone who experienced this or can give me a hand? Thanks!!
I had this same problem all of a a sudden on my Kaiser. But after doing a hard reset this got resolved.
And now i just flashed Dutty's 6.1 ROM. Its amazing update..
Cheers
Thanks Arun...
Tried the hard reset NO LUCK! Problem persists, and bluetooth keeps turning off. I go back to the wireless manager and check both boxes and they come back off in 30 seconds!!
When searching for devices it says (ERROR: PROBLEM WITH BLUETOOTH HARDWARE)
Not able to beam or receive files at all.
Any help? Thanks so much!!
Same Problem
Running into same problem here. I haven't even updated the ROM from stock yet, although I have done the JumpSPL step (cuz I received the white screen). My Radio is 1.27.14.09.
Any help is appreciated.
I would think that if you have done a hard reset and you don't install anything and you still have a problem then you **** is borked. time to do a warranty exchange.
has your bluetooth ever worked, with the rom that is currently on your phone?
Problem with Bluetooth Hardware!!!!
I am having the same problem. I have the stock AT&T ROM. Here is exactly what is happening:
The bluetooth is not working on my Tilt at all. It has lost connections with devices that it was already paired with (a Motorola Q Global and a headset). All attemps to pair the devices again lead to the following: "Error: Problem with Bluetooth Hardware".
When I go to Bluetooth Settings through the Comm Manager, then Mode and check "Turn on Bluetooth" and "Make this device visible to other devices", it unchecks as soon as I exit the settings menu. The Comm Manager constantly shows the bluetooth being off and when I tap the icon, the phone "thinks" for awhile and then it greys out again.
The only change that I have made from the time that it was working is to install the iphone package, and a today plugin (which I have since uninstalled) found here.
I recently changed my Kaiser Tweak bluetooth settings: I changed the BitPool from 'medium' to 'very high', but my headset was still working after that. The other settings are:
Sample Rate - 48000 (Advised)
Use Joint Stereo - Enabled (Default)
Receive Files - Enabled
Any ideas/suggestions?
Forced to do a hard reset
kcrumbley said:
I am having the same problem. I have the stock AT&T ROM. Here is exactly what is happening:
The bluetooth is not working on my Tilt at all. It has lost connections with devices that it was already paired with (a Motorola Q Global and a headset). All attemps to pair the devices again lead to the following: "Error: Problem with Bluetooth Hardware".
When I go to Bluetooth Settings through the Comm Manager, then Mode and check "Turn on Bluetooth" and "Make this device visible to other devices", it unchecks as soon as I exit the settings menu. The Comm Manager constantly shows the bluetooth being off and when I tap the icon, the phone "thinks" for awhile and then it greys out again.
The only change that I have made from the time that it was working is to install the iphone package, and a today plugin (which I have since uninstalled) found here.
I recently changed my Kaiser Tweak bluetooth settings: I changed the BitPool from 'medium' to 'very high', but my headset was still working after that. The other settings are:
Sample Rate - 48000 (Advised)
Use Joint Stereo - Enabled (Default)
Receive Files - Enabled
Any ideas/suggestions?
Click to expand...
Click to collapse
They only way to fix the problem was for me to do a hard reset.
Hi guys,
I have an X1 and a new Nokia6600 slide.
I have them both paired to my laptop and car (which have both bluetooth built-in) Both of the phones have bluetooth enabled and are always visible, all options to disable bluetooth or to stop being visible are disabled.
The biggest difference is this....
When I turn on my laptop or step into my car, my Nokia says, look I found your laptop/car, you're now connected! (without me doing a single thing)
My X1 is like ".........................." nothing... I have to manually enable the connection via for example ActiveSync, and chose to connect via bluetooth and then everything works fine.
I checked every setting concerning bluetooth or security and everything but I just can't find an option to make my X1 act the same as my 6600. It also doesn't matter if I just turn off the 6600 and have only the X1 turned on.
Maybe it is a setting, maybe it needs some tool or something.. I hope somebody here can help me or point me into the right direction.
Thanks!
I have the Creative D80w Bluetooth Speaker. It works great with my iPhone and iPad. I tried to use it with my N7 but it didn't work; bluetooth says "N7 not visible to other Bluetooth devices" and search for devices shows the result "no nearby Bluetooth devices were found". Do I need to root and/or unlock my N7 for it to be visible ? Thanks.
EDIT: Managed to get it worked now after playing around.