Database Develop

[Q] Installing ROM

hey guys. How to install simplicity ROM? Im currently on stock JVP with Galaxian Kernal. Never done flashing Custom ROM before. Can anyone provide steps to install it?.

First flash semaphore 1.5 via odin.
Copy the Simplicity 0.32 - Wipe CWM3 to ur sd card. not into any folders!!!
Go to recovery mode (HOME+VOL UP+POWER) do a factory reset - IT WILL ERASE ALL THE DATA IN UR PHONE SO PLS DO BACK THEM UP.
After rebooting again go to CWM recovery and install the "rom" .zip file and u are done. Then u can upgrade to 3.3 via the same way.
Its all there in the rom's thread itself. Check it out
" If you are on Gingerbread (2.3). Install a kernel with ClockWordMod (most recent ones do so. Boot into recovery (CWM) and flash the latest wipe version of Simplicity.
If you are on a previous version of Simplicity. Flash the new update zip or the new full no wipe zip in recovery (CWM)."

[Q] [Q&A]stuck in samsung logo!

Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.

thinkfreedom said:
Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
Click to expand...
Click to collapse
You will always have that problem coz the ROMs you flashed requires GB. so go flash GB first before you install CWM and custom ROMs..

thinkfreedom said:
Hi everyone,
I tried installing custom rom cyanogenmod 7.2, creed even chocobread with cwm recovery but im still stuck in samsung logo.My phone was previously android 2.2.1.Is it necessary to upgrade to stock gingerbread first and then install cwm recovery and flash custom gingerbread ROMs??
Pls help.
Click to expand...
Click to collapse
it should be 2.3.4 before you installing CWM

HERE IS WHAT YOU NEED:
1. YOU NEED TO FLASH YOUR PHONE TO GINGERBREAD 2.3.4
2. AFTER FLASHING STOCK ROM, ROOT IT!
3. INSTALL CLOCK WORK MOD
In this part, it is now the installation of your CUSTOM MADE ROM
1. Wipe Dalvick Cache
2. Wipe Data/Reset
3. Wipe Cache
4. Install Zip from sd card then locate the zip file
5. YOUR GOOD TO GO!
BTW: Always wait for the rom to load, it may take awhile to load if it is installed for the first time
Like If this helped you THANKS

What's your model number? ?
You need to flash GB-
Using Odin multi downloader+tass and also need CWM(for flash CM)...
Sent from my GT-S5570 using XDA

Thanks buddies...but already found a way out now my phone is working.

[Q] help install cyanogenmod 10.1

Hi, have a rooted P990, did manage to install MIUI but wants Cyanogenmod. The only Cyanogenmod i can install is with the Progmaq-default-cm10 But i cant get into recovery after that install. If i use AIO and do a repartition and delete all then i can install CWM or TWR recovery, but i cant install ROM from any of them. TWR say that there isnt any OS on phone, CWM only goea back into recovery when reboot. Should i install the boot.img file on the phone, if yes, how do i do it?

What does CWM say after you installed a ROM, is there any error message?
Are you using old or new bootloader? Did you make sure to use a ROM that is suitable for your bootloader? You can use AIO to change the bootloader type.

ROM unable to install

This is my second attempt to install custom ROM and I failed... I did everything step by step and it doesn't work. Or it doesnt boot at all or it craches in recovery mode while installing update.
This time i used some nightly unofficial and it stoped installing in recovery :S This is so annoyng
I downloaded stock lastest from code support for my Samsung S5830 because obviously there is non stable version of custom ROM right now.
I do not advise to go over Android 2.3.6 for S5830 or you will burn down your phone system...

Bugeera said:
This is my second attempt to install custom ROM and I failed... I did everything step by step and it doesn't work. Or it doesnt boot at all or it craches in recovery mode while installing update.
This time i used some nightly unofficial and it stoped installing in recovery :S This is so annoyng
I downloaded stock lastest from code support for my Samsung S5830 because obviously there is non stable version of custom ROM right now.
I do not advise to go over Android 2.3.6 for S5830 or you will burn down your phone system...
Click to expand...
Click to collapse
What did you do exactly?

Viper The Ripper said:
What did you do exactly?
Click to expand...
Click to collapse
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6

Bugeera said:
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Click to expand...
Click to collapse
Ok now you are unrooted on your new polish right. So now root it with UniversalGingerbreadroot.zip (google it.) Flash an older version of CWM(5.0) through the stock recovery. Finally install a stable custom rom initially do not go for CM roms as for testing try some other stock based rom and if successful you can advance to CWM.
All the best.

Bugeera said:
Rooted phone with SuperOneClick successfully
downloaded CWM recovery, custom ROM, google apps and newcamera.apk
puted in SD
entered recovery mode, hard reset options (wipe data + catche)
installed zip from SD (CWM recovery)
rebooted recovery
installation of custom ROM stoped with error code (7)
from there i wouldnt be able to boot system
then i used code support and downloaded firmware flash files for S5830
odin installed it but also wont boot up the phone
then i pissed off and took old polish firmware installed with odin, after that did hard reset and now phone is working on 2.3.6
Click to expand...
Click to collapse
Here you'll find ROOT and CWM files to get ready your Ace, than you'll be able to install Customs STOCK Roms, CM7.x, CM9.x, CM10.x
Read carefully the threads in GT-S5830 Android Development section and follow the dev's instructions
PS: To get CM11.x you'll need to flash CWM6.x or TWRP

Bootloop on custom ROMs; stock ROM OK

Hi all!
I flashed my recovery to TWRP and ever since then, I always get stuck in bootloop no matter what custom ROM I try. Flashing back to stock rom via ODIN works.
It's been a while since I've tinkered with custom ROMs so I may be missing something. Any ideas on where to start?

joshbeoulve said:
Hi all!
I flashed my recovery to TWRP and ever since then, I always get stuck in bootloop no matter what custom ROM I try. Flashing back to stock rom via ODIN works.
It's been a while since I've tinkered with custom ROMs so I may be missing something. Any ideas on where to start?
Click to expand...
Click to collapse
Hi,
Which phone ? i9305 or i9300 ?
Which version of TWRP do you use ?
You should try latest version of TWRP (2.8.7.3).
Or try Philz touch Recovery 6.48.4 or 6.59.

1.Repeat ODIN step to stock rom
2.Root the phone by kingroot (as it's doesn't required pc)
3.After rooting, Download Cwm rom manager
4.Install Cwm by selecting your phone model and etc
5.flash it directly from the apps
6.now you can flash any rom ( please backup your system for your safety)