[Q] help please P1010 - Galaxy Tab Q&A, Help & Troubleshooting

I installed cwm 5.0.2.7 via odin 1.6, now it is telling me that error 7 basically telling me it is not the right rom for my device. I double checked and it is. I found a work around erase the get asset portion in the script. The issue is now the file is on the internal sd card, and I can't access it and cwm won't mount my external sd card, to put a modified rom on there. I can't boot into download mode as it just keep putting me back into the cwm recovery screen. Is there a way to access the internal sd card, mount it with a usb cable in recovery mode, or is there a different way to put it in download mode, and download a different rom on to the internal sd card. This is my nephews tablet, and he will be devastated if I can't fix it.

I don't own a P1010
but I think you better restock and follow what is done in this thread:
http://forum.xda-developers.com/showthread.php?t=1520859

Related

sdcard not being detected. Phone will not boot. HELP!

I've been having issues with my phone for a while. Mostly the sdcard will occasionally just refuse to be detected and/or mount at all, even in recovery. I am running the danger spl and the corresponding radio. I usually run Cyanogen Mod.
Well my issue now is that my phone is wiped, no rom, and I cannot mount my SDcard to get a new rom loaded. How do I either:
A. Mount my sdcard (or make it be detected or whatever)?
B. Use adb (which I just installed and have no experience with) to flash a rom to my phone without the sdcard.
Do you have an SD card reader?
You need to get a card reader for your pc. download the ROM you want onto the root of the SD card. Put it back in your phone and boot into recovery (Power+home). Then install the ROM on your phone, and reboot.
Dredge said:
Do you have an SD card reader?
You need to get a card reader for your pc. download the ROM you want onto the root of the SD card. Put it back in your phone and boot into recovery (Power+home). Then install the ROM on your phone, and reboot.
Click to expand...
Click to collapse
It appears that you may have missed the fact that he is most likely unable to mount that sd card on his phone.
I'm just going to throw this out there so don't be mad.
Maybe just maybe you need a new sdcard?
If it's not the card then it's probably the phone.

[Q] Unable to mount SD card (CWM 3.0.0.6)

I have CWM 3.0.0.6 on an uSD card, and the Nook boots fine into recovery, but when I swap out the card to remove dual boot, I get an error saying E: can't mount sdcard. Any ideas how to fix?
-Kevin
I've had this issue myself a few times.
Typically you'll want to swap out the SD card the second CWM boots up, and if that doesn't work you may want to try flashing CWM internally instead, or simply add the files to the CWM sd card via your phone or an SD reader.
Awesome - thanks Link. Pulling the card immediately after CWM launched enabled the Nook to recognize the card I quickly swapped in.

USB Brick?

Hi,
I am having an issue that I'd hope you would be able to help me with. I flashed CyanogenMod10, and everything was doing fine, smooth performance, reboots with no problems, but then suddenly one day it went bricked. I restored through the SmartFlashTool Method, and got back to the stock Rom with everything working except for the SD card.
I have tried out various stock ROMs and none seemed to recognize the SD card, outputting a message of "SD card removed. Please insert a new one."; getting on to ADB when trying to mount the SDcard I get this message "mounting /dev/block/mmcblk1p1 on /sdcard failed: No such file or directory", and while trying to mount the SD card in CWM Recovery, it tells me "E: Can't mount sdcard", and when I try to mount USB storage through CWM, I get "E:Unable to write to ums lunfile(no such file or directory)", and when trying to mount /sdcard on CWM I get a "Error mounting /sdcard" message... I hope people at XDA would be able to help me since I have been lurking through the forums and internet without any good answer. :highfive:
I was able to mount the SD card through ClockWorkMod Recovery v5.0.2.6, but again, barely at random times when it works, and after installing a ROM those times, the phone usually works for one hour or two and then gets bricked again. I can not have access to another CWM version since I need an SD card to flash it. To install CWM I am using a patched .bin and .fls files in the SmartFlashTool method of unbricking. When the SD card gets recognized, I can even reboot the phone and still get the SD card to be recognized. The SD card problems don't happen until the random bricks after flashing a ROM. :fingers-crossed:
I have also tried using several functioning SD cards of different capacities formatted in NTFS, FAT32 and exFAT with no luck. I am also not willing to go back to stock since it is buggy and lags a lot compared to CM7, CM10 and every other custom rom I have tried. :crying:
Thank you for any help you could provide me, or if you have any answer for this problem,
Pablo Lujambio
Firstly when you get access to sd card with cwm or anything get your files backup to your pc.Than try format your sdcard in settings menu on your phone.Did you tried format your sdcard in settings menu?
George Jetson said:
Firstly when you get access to sd card with cwm or anything get your files backup to your pc.Than try format your sdcard in settings menu on your phone.Did you tried format your sdcard in settings menu?
Click to expand...
Click to collapse
Yes I did try that last time but I only seem to get a "Can't mount sdcard" error. I haven't been able to get the phone to recognize any SD card on v10a, v20a, nor v20b stock roms.

Wiped factory data, but can't find .zips!?

CWM Recovery won't read my SD card. I've wiped factory data, but can't install the new ROM because it won't read the card. The files are zipped, the SD card is in the slot, and the files are on the EXTERNAL card, not internal. Any work arounds? I need help, since I'm now out a phone until this is resolved.
Courtney
(I'm a man)
What is "apply sdcard:update.zip"? Do I need to run this first?
Courtney
When to "- mounts and storage", clicked on "mount /sd-ext." I got an "Error mounting SDEXT:!
Courtney
CSaab900 said:
CWM Recovery won't read my SD card. I've wiped factory data, but can't install the new ROM because it won't read the card. The files are zipped, the SD card is in the slot, and the files are on the EXTERNAL card, not internal. Any work arounds? I need help, since I'm now out a phone until this is resolved.
Courtney
(I'm a man)
Click to expand...
Click to collapse
What rom are you on now? Does the version of cwm your using have the option to install zip from ext sd? If not I don't think you can. Put the zip on the internal sd by plugging into a pc that has the captivate drivers installed and from recovery go to "mounts and storage" and mount usb. that should allow you move the zip onto the internal sd.
You don't need to use update zip.....you will always get that error trying to mount ext sd from mounts and storage. I always have anyway, not an issue.
Edit: just tried and I can mount ext sd, but I remember I couldn't in the past, so knowing your rom/kernel would help. There are multiple threads on how to flash roms and I'm betting one of those, especially one for the rom/kernel you have, and want to flash, could explain in better detail than I can how to successfully flash.
CSaab900 said:
When to "- mounts and storage", clicked on "mount /sd-ext." I got an "Error mounting SDEXT:!
Courtney
Click to expand...
Click to collapse
Wiping and factory reset shouldn't mean your phone is dead. You should be able to boot the phone into normal operation, then copy the zip from your external storage to internal, if mounting in recovery is a problem.
Did you uninstall ROM manager as I suggested in your other thread? It just doesn't work well on Captivate and you can see threads here where people get into trouble with it.
If you are stuck with CWM recovery and cannot boot normally - then read on
It's not SD-ext. Which mounts are listed in the CWM mount menu on yours?
Depending on where you are in the upgrade process, it might differ.
What version of CWM recovery are you running - it is on the first screen you see.
You may see USB storage, which refers to your internal 'SD Card' and you may also see emmc which may refer to your external SD card, the one in the slot on the back, above the battery.
Sent from the wholly ROMin' empire. SGH-I897 CM10.1
Here's the update:
I used the USB connection this morning, and I was able to complete the flash process. Everything went well, other than the phone will not recognize my SIM car. It also reboots every 5 minutes, so I guess I have a few bugs to work out. I'll start searching these issues.
Courtney

[Q] Cant see Internal storage card in recovery

Hi guys.
I want to flash the GT-N7000 of a friend of mine but here 's the thing.
I got all i need (raw kernel, philz cwm, rom, gapps etc)
when i boot into stock recovery i can select install from external storage. That gives me the message: failed to mount.
We looked into the phone and tadaa there was no SD Card.
My question is: is it possible to mount / install zip files from internal card? I can access the card trough USB cabel on my pc. I copied all the zip files there but i cant acces it trough the stock samsung recovery.
I hope u guys can help

Categories

Resources