Related
Has anyone found a descent third party car windshield mounth for the Galaxy Tab yet?
Here is one.
Saw something similar on eBay, isn't the "claws" way to big? looks like you could hold a brick with that.
I got the above in car mount as part of the modaco superetrader offer, it's very good and versatile considering the price but the longer arm is almost too wide, so it's a bit fiddly when mounting the brackets on the short sides of the tablet, and there seems to be no way of mounting the brackets on the long sides of the tablet without them pressing the power and volume buttons
Attached is the one Samsung shop gave me free with my galaxy tab and they said the desktop dock also coming soon and they will give me one for free as well .
exact one also on youtube
http://www.youtube.com/watch?v=uGL0n4lgYj4
dandun said:
Attached is the one Samsung shop gave me free with my galaxy tab and they said the desktop dock also coming soon and they will give me one for free as well .
exact one also on youtube
http://www.youtube.com/watch?v=uGL0n4lgYj4
Click to expand...
Click to collapse
That one seems nice!
dimaru said:
I got the above in car mount as part of the modaco superetrader offer, it's very good and versatile considering the price but the longer arm is almost too wide, so it's a bit fiddly when mounting the brackets on the short sides of the tablet, and there seems to be no way of mounting the brackets on the long sides of the tablet without them pressing the power and volume buttons
Click to expand...
Click to collapse
Aren't the side bits just fairly hard foam? Would it be possible to cut out grooves where the buttons are to stop it pressing on them?
Where to purchase a dock
dandun said:
Attached is the one Samsung shop gave me free with my galaxy tab and they said the desktop dock also coming soon and they will give me one for free as well .
exact one also on youtube
http://www.youtube.com/watch?v=uGL0n4lgYj4
Click to expand...
Click to collapse
Anyone have a link to where this can be purchased online?
I have the RAM holder for my old Samsung Q1U's, I found that the SGT w/ the soft case on it wedges rather nicely into it w/o risk of falling out. Because the Q1u is longer than the SGT, the mount does stick out about half an inch on each side.
wow
dandun said:
Attached is the one Samsung shop gave me free with my galaxy tab and they said the desktop dock also coming soon and they will give me one for free as well .
exact one also on youtube
http://www.youtube.com/watch?v=uGL0n4lgYj4
Click to expand...
Click to collapse
Wow that is ugly! dont think i would want the big ass thing on my dash It looks like it could come to life and beat the **** out of me. its huge
Scosche do one as well: http://www.scosche.com/products/sfID1/337/sfID2/370/productID/2014
Doesn't look like it has anything to hold it in place, so it's more of a perch than anything, any sudden acceleration and it looks like the tab could fall off.
Shame if that's the case, as it looks good otherwise.
knightnz said:
Scosche do one as well: http://www.scosche.com/products/sfID1/337/sfID2/370/productID/2014
Doesn't look like it has anything to hold it in place, so it's more of a perch than anything, any sudden acceleration and it looks like the tab could fall off.
Shame if that's the case, as it looks good otherwise.
Click to expand...
Click to collapse
That blue stuff you see is INCREDIBLY sticky, but leaves no residue when it releases. That Tab won't be going anywhere unless there's one hell of a frontal impact on the vehicle (or you own a Veyron with a strap-on rocket booster).
I order this 2 day ago
http://www.dealextreme.com/details.dx/sku.44371
Just for about 9 €
Free ship, but for my country i must whait about 20 days..
Arkon has one for $19.95:
http://www.arkon.com/accessories/galaxy_tab_windshield_mount.html
Shady Gambino said:
Arkon has one for $19.95:
http://www.arkon.com/accessories/galaxy_tab_windshield_mount.html
Click to expand...
Click to collapse
NOT BAD.. seems like it will work with a gel case, im using the ebay one i bought for my ipad and it works great just tends to cover the volume buttons on the case depending how i place it on there. , im still debating if getting the one by slipgrip is gonna be worth it.. depending on if there a holster case that comes out later down the road, i have a slip grip mount for my otterbox defender case on my hd2 and its perfect so im sure the slip grip one for the tab with a gel case would fit perfect just worried if i switch cases later down the road then can't use the slip grip anymore.
heres the slip grip
http://cgi.ebay.com/SlipGrip-Car-Ho...Accessories&hash=item20b50de1fc#ht_3472wt_758
seems like they sell two types with case or without and a mount that goes on ram mounts.
Hi
anyone tried following item?
Check out this item I found on eBay:
Premium Car Holder for Samsung P1000 Galaxy Tab
Link: http://cgi.ebay.co.uk/Premium-Car-H...488043579QQcategoryZ35193QQvarZQQcmdZViewItem
Sent from my GT-P1000 using XDA App
Got my tab from UAE with nothin(accessories)watching others gifted upon buy the tap makes me feel jerk and force me to find a way to complain UAE Samsung
Does anybody know a perfect fitting car craddle, like the original from LG for the P970?
Brodit is thinking about to release a cradle. So just email them that you also want a cradle, maybe this helps
Just mail to: [email protected]
why not a universal craddle?
i bought a new specific craddle after changing the mobile.
now i try this one:
Clingo Universal Vent Mount
after 4 weeks, i like it.
sorry, can't post outside links.
You can also use the craddle for the galaxy nexus from Brodit , fit 100%
Best regards,
Christian
Thanks for your replys, both are worth to take a closer look to it.
http://www.amazon.de/Clingo-Hands-F...ntierte-Technologie/dp/B003ULP9A2/ref=lh_ni_t
Rgds
MyPass
The Clingo doesn't work because it needs an even surface. The back of the 4X is uneven.
I think I give the Galaxy Nexus cradle a try if its available on Amazon. Thanks.
Looking at the pics of the Brodit for the Galaxy Nexus it looks like the Nexus has a curved base. Surely that won't fit? I want to be sure before spending £35 on one!
kovu94 said:
The Clingo doesn't work because it needs an even surface. The back of the 4X is uneven.
I think I give the Galaxy Nexus cradle a try if its available on Amazon. Thanks.
Click to expand...
Click to collapse
hmmm, i use clingo ( car vent ) since 4 weeks and it works.
Best regards,
rAiSt
Only the passive Brodit holder fits.
rAiStGER said:
hmmm, i use clingo ( car vent ) since 4 weeks and it works.
Click to expand...
Click to collapse
Can you post some pictures? I'm interested in the way how this works with the uneven surface of the back of the phone.
later or tomorrow. (i am at work by bike)
Best regards,
rAiSt
Thanks for the pictures - but I prefer a fixed installation and no window holder.
realberti said:
You can also use the craddle for the galaxy nexus from Brodit , fit 100%
Click to expand...
Click to collapse
Searching at Brodit for the holder the search shows two models:
Item no 511324
Passive holder with tilt swivel - Samsung Galaxy Nexus GT-I9250
Item no 511331
Passive holder with tilt swivel - Samsung Galaxy Nexus SCH-I515
Which one is the right one?
Thanks,
Sebastian
I bought this one - Samsung ECS-K2
I just bought a Clingo, and put a screw through the base of the ball-socket part to secure it to my Brodit base in my car!!
It holds it quite far out though, tomorrow I think I'll saw the ball-socket's arm down a bit and put a screw into the middle of it from the back of the Brodit plate.
Works well on the textured rear of the 4x, but with the Nillkin cover it did keep falling off, I guess it's a funny slightly rubbery finish
kovu94 said:
Thanks for the pictures - but I prefer a fixed installation and no window holder.
Searching at Brodit for the holder the search shows two models:
Item no 511324
Passive holder with tilt swivel - Samsung Galaxy Nexus GT-I9250
Item no 511331
Passive holder with tilt swivel - Samsung Galaxy Nexus SCH-I515
Which one is the right one?
Thanks,
Sebastian
Click to expand...
Click to collapse
It is the one for the Nexus GT, 511324
Thought I'd show a pic of my Clingo, modified by cutting off the ball-joint and screwing it to my Brodit base. (it was far too far out when I screwed the whole ball-joint arm on, and was knocked with every gear-change.
I just used my carkit I had for my SGS2, fits perfectly..
Sent from my LG-P880 using xda app-developers app
Wombat - Was it a Brodit? Active? (with charger) or just the 'passive' holder?
I was going to buy one as the 4x is only 2mm wider, and was contemplating dremelling it out a bit!! Would love to know if it fits as it is!
Thanks for the pic. Looks really cool!
Ben-B said:
Wombat - Was it a Brodit? Active? (with charger) or just the 'passive' holder?
I was going to buy one as the 4x is only 2mm wider, and was contemplating dremelling it out a bit!! Would love to know if it fits as it is!
Click to expand...
Click to collapse
No idea which make was cheapo one, passive, came with lighter cable etc.. its a snug fit, not too tight..
All buttons exposed and accessible...
Update: nothing written on the mount but phone holder says haicom gps ... if that helps
Sent from my LG-P880 using xda app-developers app
Anyone have experience with this mount? It seems like a high quality mount but I want to know if anyone who has it likes it and if it is able rotate and stay in the mount landscape.
http://www.proclipusa.com/default.aspx
ProClipUSa is the very best
I have been using their car mounts for almost a decade and their products are top notch. You get what you pay for: Quality
For the note 1 I got this as I wanted some flexability whitch will come in handy for me as my AT&T GNote 2 has now shipped.
http://www.proclipusa.com/brodit-de...ces-with-or-without-a-skin-875214A-13978.aspx
I would confirm by email with ProClip that this is the proper model, adjustable holder, for the GNote 2 if you choose to go adjustible. If you want to go for the specific holder for the Gnote 2 or any device for that matter, use their wizards.
Their products are expensive but worth every penny IMO.
Claude H.
Yes. Their products are very very good quality. I bought 3 device mounts and 2 vehicle mounts from them. They are expensive and very good.
One of the holder is for Gnote 1, not 2, they are even compatible to the extended battery from Mugan. I am very satisfy.
Sent from my GT-N7105 using Tapatalk 2
claude4 said:
I have been using their car mounts for almost a decade and their products are top notch. You get what you pay for: Quality
For the note 1 I got this as I wanted some flexability whitch will come in handy for me as my AT&T GNote 2 has now shipped.
http://www.proclipusa.com/brodit-de...ces-with-or-without-a-skin-875214A-13978.aspx
I would confirm by email with ProClip that this is the proper model, adjustable holder, for the GNote 2 if you choose to go adjustible. If you want to go for the specific holder for the Gnote 2 or any device for that matter, use their wizards.
Their products are expensive but worth every penny IMO.
Claude H.
Click to expand...
Click to collapse
Are you saying here that the adjustable mount will in fact work with the Note 2? I called their customer support regarding this and was told it does not adjust to fit the Note 1 nor the Note 2. You used this holder with your Note 1?
Pandemoniumone said:
Are you saying here that the adjustable mount will in fact work with the Note 2? I called their customer support regarding this and was told it does not adjust to fit the Note 1 nor the Note 2. You used this holder with your Note 1?
Click to expand...
Click to collapse
I have the adjustable mount and it works with the Note 1 with a TPU case on. So it will definitely work for the Note 2. I can take some pictures if you'd like.
Evo 4G63 said:
I have the adjustable mount and it works with the Note 1 with a TPU case on. So it will definitely work for the Note 2. I can take some pictures if you'd like.
Click to expand...
Click to collapse
Appreciate the offer but no need. I'll be ordering this straight away!
I've gone with the ProClip mount since the beginning, I can vouch for the quality as well.
Sent from my SGH-T889 using Tapatalk 2
Pandemoniumone said:
Appreciate the offer but no need. I'll be ordering this straight away!
I've gone with the ProClip mount since the beginning, I can vouch for the quality as well.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
Hi,
I do not think it will work with the Note 2, see below for the email I received from ProClip, apparently the Note 2 is too wide for the adjustable holder.
-------------------
Hi Alan,
All our adjustable holders don’t open wide enough to accommodate the Galaxy Note II with a case. This device is just too wide for us.
Best Regards,
Customer Service
ProClip USA, Inc.
Just ordered mine this morning. I was using their GSIII mount and it works great. I don't use a case and had the holder with built in charger.
It slides in and out easily and I prefer the phone to be upright.
My car has a nice flat area where I was able to use some heavy duty 3m dual lock velcro to mount the holder to the dash without using their clip. That sucker was not moving.
Now let's see how long before it ships. I had to wait a few weeks before the GSIII one shipped even though it did not say backordered on the site.
very tempted to buy this:
http://www.proclipusa.com/?sectionp...77&have_holder=&have_mount=&p_pageid=1&dtype=
However it lists that it will not work with a case on the device! Does anyone have this yet? The only case I'd probably put on would be a very thin TPU or the official samsung flip.
aw000002 said:
Hi,
I do not think it will work with the Note 2, see below for the email I received from ProClip, apparently the Note 2 is too wide for the adjustable holder.
-------------------
Hi Alan,
All our adjustable holders don’t open wide enough to accommodate the Galaxy Note II with a case. This device is just too wide for us.
Best Regards,
Customer Service
ProClip USA, Inc.
Click to expand...
Click to collapse
Right, customer support told me the same. However, Evo4G63 said it worked well for him using the Note 1 with a case, no reason why it shouldn't work for the Note 2....I guess we'll soon find out
Sent from my SGH-T889 using Tapatalk 2
+1 for the adjustable ProClip cradle # 875214. High quality item. Since it's adjustable, I've been able to use with all my devices for the past 5 years, up to and including my Note 2! It doesn't fit 100% snugly, resulting in a little flop when pressing on the home button. Not a deal-breaker for me though, and still very usable.
Pandemoniumone said:
Right, customer support told me the same. However, Evo4G63 said it worked well for him using the Note 1 with a case, no reason why it shouldn't work for the Note 2....I guess we'll soon find out
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
My Note II just came in today so I will be taking pics of it with both my Note and Note II. I'll update this post with pics later tonight.
Update:
I snapped a few pics.
Here's just the mount and holder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here's the mount with my Note 1 + TPU case
Here's the mount with my Note 2 without case
The mount wasn't adjusted at its peak width either, so it can probably fit with a larger case.
I hope this cleared some of the confusion. Despite what the employees at ProClip said, I have tried this mount with both my Notes and they definitely fit, the mount even has some room to adjust wider.
My Note II holder shipped today. Will post pics when it arrives
Sent from my SPH-L900 using xda premium
Evo 4G63 said:
My Note II just came in today so I will be taking pics of it with both my Note and Note II. I'll update this post with pics later tonight.
Update:
I snapped a few pics.
Here's just the mount and holder
Here's the mount with my Note 1 + TPU case
Here's the mount with my Note 2 without case
The mount wasn't adjusted at its peak width either, so it can probably fit with a larger case.
I hope this cleared some of the confusion. Despite what the employees at ProClip said, I have tried this mount with both my Notes and they definitely fit, the mount even has some room to adjust wider.
Click to expand...
Click to collapse
Thanks for the pics! Do you experience any movement when pressing the home button?
Mine came yesterday, here it is, installed. I'm using the male/female clip, so I can move it to my Ranger, where I already have a ProClip vent mount.
This is perfect for navigation, it slides in easily and connects securely. I do have the swivel version, but it won't do landscape - but that's ok for me, I prefer portrait for navigation (I'm an old Garmin iQue 3600 user, so portrait is what I'm used to. North up )
reinbeau said:
Mine came yesterday, here it is, installed. I'm using the male/female clip, so I can move it to my Ranger, where I already have a ProClip vent mount.
This is perfect for navigation, it slides in easily and connects securely. I do have the swivel version, but it won't do landscape - but that's ok for me, I prefer portrait for navigation (I'm an old Garmin iQue 3600 user, so portrait is what I'm used to. North up )
Click to expand...
Click to collapse
Actually looks VERY nice surprisingly, I would not need this of course at the moment because I have a built in GPS, but it is a create cradle and it definitely looks very clean in the Camry
I might invest in one of these just to have it facing me rather than laying in my cup holder while charging, but still....thanks for the post
Edit...
By the way, which one did you buy, can you please post a link to that exact one?
Evo 4G63 said:
My Note II just came in today so I will be taking pics of it with both my Note and Note II. I'll update this post with pics later tonight.
Update:
I snapped a few pics.
Here's just the mount and holder
Here's the mount with my Note 1 + TPU case
Here's the mount with my Note 2 without case
The mount wasn't adjusted at its peak width either, so it can probably fit with a larger case.
I hope this cleared some of the confusion. Despite what the employees at ProClip said, I have tried this mount with both my Notes and they definitely fit, the mount even has some room to adjust wider.
Click to expand...
Click to collapse
Hey do you think it will fit with an Otterbox Defender case (when it comes out)? as much as I do not need one of these, I am actually thinking of buying one. Especially after seeing your pictures and the other pictures below. Please advise
Joe333x said:
Thanks for the pics! Do you experience any movement when pressing the home button?
Click to expand...
Click to collapse
It does move because the phone is a lot slimmer than the crevices since the holder was designed to fit devices with cases or large devices, but with a rubbery grippy TBU or so case, it doesn't move nearly as much. If you are talking about the tilting and swiveling, the pressure used to press the home button shouldn't have an effect on it.
elite-fusion said:
Hey do you think it will fit with an Otterbox Defender case (when it comes out)? as much as I do not need one of these, I am actually thinking of buying one. Especially after seeing your pictures and the other pictures below. Please advise
Click to expand...
Click to collapse
I had the Trident Kraken case on my Note 1 before, and it didn't fit. Then again, the Trident Kraken I think is bigger than the Otter Box Defender and the Note 1 is wider than the Note II.
I don't think it will fit with the Note II Otter Box Defender since the holder was adjusted almost at its maximum width for my Note II with the official Samsung TPU case, but there is a wee bit of space to be spared. I guess it would depend on how much wider the Defender is than the official Samsung case. I don't think the thickness would be an issue though. When the Defender does come out, I can head over to a store with my mount and try to fit one.
This mount would work pretty well with any normal non ruggedized case though.
Evo 4G63 said:
It does move because the phone is a lot slimmer than the crevices since the holder was designed to fit devices with cases or large devices, but with a rubbery grippy TBU or so case, it doesn't move nearly as much. If you are talking about the tilting and swiveling, the pressure used to press the home button shouldn't have an effect on it.
I had the Trident Kraken case on my Note 1 before, and it didn't fit. Then again, the Trident Kraken I think is bigger than the Otter Box Defender and the Note 1 is wider than the Note II.
I don't think it will fit with the Note II Otter Box Defender since the holder was adjusted almost at its maximum width for my Note II with the official Samsung TPU case, but there is a wee bit of space to be spared. I guess it would depend on how much wider the Defender is than the official Samsung case. I don't think the thickness would be an issue though. When the Defender does come out, I can head over to a store with my mount and try to fit one.
This mount would work pretty well with any normal non ruggedized case though.
Click to expand...
Click to collapse
Great Thanks for the insight I looked up the different ones on their site, and I actually want to get the one that comes with the charger, but I feel like im SOL with that because it wont fit with a case on it, so i dont know what to do
xak944 said:
+1 for the adjustable ProClip cradle # 875214. High quality item. Since it's adjustable, I've been able to use with all my devices for the past 5 years, up to and including my Note 2! It doesn't fit 100% snugly, resulting in a little flop when pressing on the home button. Not a deal-breaker for me though, and still very usable.
Click to expand...
Click to collapse
I also have the 875214 which I ordered for my Galaxy S3 a month or so ago. The S3 with a Seidio Surface case fit "ok" but it does rock back and forth a little bit as you mentioned. Still perfectly usable though. Called ProClip and they are aware of the issue and have a new version coming shortly that works better with the S3. That was a few weeks ago but they said the would contact me the minute the new model was available and arrange for a swap.
I've since purchased the Note 2 (love it!) and have adjusted the holder to fit the Note 2. Works perfectly as you mentioned and again rocks just a little bit same as the GS3. I don't have a case on my Note 2 yet (Seidio Surface is on the way) so I'm hoping that will snug it up a little further. I suspect the revised GS3 version will also work better with the Note 2.
I am also looking at ProClip's dedicated Note 2 holders but website mentions that they will not work with a case installed so non-starter for me. I am curious though if anyone has ordered one of the Note 2 specific cases and has been able to make it work with a slim case installed. Is there any flex at all in the holder that would allow the case to fit as well? I would order the hard wired version of the holder in a heart beat if someone can confirm a slim case will fit it. Surprised ProClip hasn't released an adjustable version with MicroUSB port for the Note 2 but maybe that's in the works.
And have to agree with others here. ProClip mounts are pricy but well made and worth every cent. I've owned 4 of them already over the years for various phones. I've never used their vehicle mounts though. All my cars have been able to use the Panavise custom mounts which I also highly recommend. ProClip holders fit on them perfectly as they use standard AMPS bolt patterns. Cheers!
(sorry, tried to post link to panavise brackets but not allowed yet. Just google "panavise indash custom mount' and you'll find it. Selection is more limited than Proclip but if they have one for your car it's usually a nicer solution combined with the ProClip holder)
Hi,
has anybody a good idea for a Car and/or bike holder?
Thanks
PseudoReal said:
Hi,
has anybody a good idea for a Car and/or bike holder?
Thanks
Click to expand...
Click to collapse
im too loking for one.if found letme know pls
I have purchased items from this company before. I have been very pleased with their product. They make phone holders for use with a case on it, or without.
http://www.slipgripcarmounts.com/Xperia-ZR-C5502-C5503_c_28351.html
I had a Samsumg SIII bike holder lying around, which almost fits the ZR. With a bit of heating I was able to bend the levers a bit for a snug fit. Works like a charm!
Got the product from EBAY, link doesn't work anymore. Product description is (Black Bicycle Cycling Bike Holder Cradle Mount for Samsung Galaxy S3 SIII i9300 (170908085268). Price €4,49
Bought the T-Mobile S6 yesterday and went looking for the keyboard case. The store did not have it.
I noticed all the best buy stores in my area did not have it. Amamzon shows 1-3 months shipping.
Yes I can order online, but I don't see the case available in the shop Samsung app at all.
Just made me think, with all the bad reviews, maybe they are going to release an updated version.
Could just be wishful thinking..lol.
malimal said:
Bought the T-Mobile S6 yesterday and went looking for the keyboard case. The store did not have it.
I noticed all the best buy stores in my area did not have it. Amamzon shows 1-3 months shipping.
Yes I can order online, but I don't see the case available in the shop Samsung app at all.
Just made me think, with all the bad reviews, maybe they are going to release an updated version.
Could just be wishful thinking..lol.
Click to expand...
Click to collapse
Still available on Samsung UK.
I spoke to someone on their live chat the other day who said there are currently no plans to change it.
alexdann said:
Still available on Samsung UK.
I spoke to someone on their live chat the other day who said there are currently no plans to change it.
Click to expand...
Click to collapse
Ahh well... Wishful thinking..?
I haven't got mine yet, I held off at first because of the long shipping delays. But the other day it was about $50 usd off on Amazon and "only" 2 weeks to ship so it's on the way now. Design looks fine to me, I think I understand the limitations enough going in but I shall find out soon.
I did just receive my Keyboard case from Samsung.US. It was on back-order for 4 weeks.
I am using this now for 1 week and it sticks really well. No issue at all. I did not have to clean the back of my tablet or anything.
I also removed it several times and it did stick really well. Also after I but it back.
I have no issue at all and am very happy with it.
Maybe they did change something?
So the Amazon delivery estimate has been saying a few months, but it was at my door within a week of ordering, so I would recommend to go ahead and place the order.
As for the case sticking, I've had no problems either. The instructions also clearly state the back needs to be stuck on and left for an hour to adhere properly, so keep that in mind. Also I would clean the surface of tablet just incase before applying unless Its brand new like when I applied mine...
I wish there was a redesign. The body case seems to un-stick randomly and it provides not protection around the sides nor does it keep the screen's edges protected with a "lip".
Otherwise, if someone would make a case that would cover at least 3 sides of the tablet and leave just enough of the side with the keyboard pin connector exposed to attach the keyboard, that would be great. Either that or that side of the tablet is a flap that can be opened to attach the keyboard.
I purchased a $6 silicon case for every day use since I mostly just use the Tab S6 at home sitting in my recliner. But, I wanted the keyboard for those times that I didn't want to swipe everything.
However, the back piece of the keyboard case just doesn't impress me since it's not an easy auto-on/auto-off in any respect. So, I've been considering getting another silicon case that I can attach the keyboard case back cover to, then cut the silicon case just enough to allow the keyboard to attach.
So, what do you guys think? Will the keyboard case back cover's stickyness adhere to silicone better than the back of the tablet?
Sent from my SM-T860 using Tapatalk
DaWeav said:
I purchased a $6 silicon case for every day use since I mostly just use the Tab S6 at home sitting in my recliner. But, I wanted the keyboard for those times that I didn't want to swipe everything.
However, the back piece of the keyboard case just doesn't impress me since it's not an easy auto-on/auto-off in any respect. So, I've been considering getting another silicon case that I can attach the keyboard case back cover to, then cut the silicon case just enough to allow the keyboard to attach.
So, what do you guys think? Will the keyboard case back cover's stickyness adhere to silicone better than the back of the tablet?
Sent from my SM-T860 using Tapatalk
Click to expand...
Click to collapse
It looks like the silicon clear case works.
"https://forum.xda-developers.com/showthread.php?p=81630647"
Sent from my SM-T860 using Tapatalk
Samsung will never have the integrity to do a redesign for a product accessory, especially a device in their tablet lineup that they don't give two ****s about.
Hello ,
I have the book cover Galaxy Tab S6 by Samsung , it's perfect , finally ! I don't buy cover Samsung for my Tab S4 , Spen outside , it's a big problem ! I buy on Amazon a simple cover to have Spen inside , it's better to go outside with my Tab S4.