[Q] HTC One Mini Port - HTC First

I tried the latest beta version of a HTC One Mini port by nlsolja123 yesterday. It seemed to have flashed with no problem, but then it doesn't go past the "One" screen. I would let him know that I tested it since he asked has anyone done so, but I'm unable to since I'm new. Has anyone else tried it besides me?

it is possible, that something is wrong it the startup or something. did you try both of the ones i uploaded or just the newest? im needing someone experienced to help get a logcat. and find the error

nlsolja123 said:
it is possible, that something is wrong it the startup or something. did you try both of the ones i uploaded or just the newest? im needing someone experienced to help get a logcat. and find the error
Click to expand...
Click to collapse
I just tried the second one. I was going to try the first version once I got a chance. However I saw that someone else already tried it and didn't have any success.

jmo742 said:
I just tried the second one. I was going to try the first version once I got a chance. However I saw that someone else already tried it and didn't have any success.
Click to expand...
Click to collapse
i just tried both, the second one is the one that atleast boots.

nlsolja123 said:
i just tried both, the second one is the one that atleast boots.
Click to expand...
Click to collapse
OK. At first I thought it was going to take a while to boot up because I've flashed ROMs/ports in the past that's done so. I wish I could help, but the only experience I have is flashing multiple ROMs on different phones. But there's one question I have though: when I flashed the port, it asked if I wanted to fix permissions to root it...are you supposed to fix it or decline? I did both options and came up with the same result.

jmo742 said:
OK. At first I thought it was going to take a while to boot up because I've flashed ROMs/ports in the past that's done so. I wish I could help, but the only experience I have is flashing multiple ROMs on different phones. But there's one question I have though: when I flashed the port, it asked if I wanted to fix permissions to root it...are you supposed to fix it or decline? I did both options and came up with the same result.
Click to expand...
Click to collapse
i tried both with no differnt outcome

nlsolja123 said:
i tried both with no differnt outcome
Click to expand...
Click to collapse
In the development section, blafree64 has a Sense 5 ROM. Have you tried flashing it? The file is pretty big and took a while to download, but when it eventually finished downloading I tried to flash it. However, my phone just hung on the Facebook logo.

Related

KIKAT Custom ROM Bad install now boots to a black screen

Hey guys I searched but didnt find anyone else dump like me that didnt install the custom safestrap apk that comes in the packaged zip kitkat rom knoxraid. I was on the very first knoxraid (stock & rooted) also had safestrap installed with the same version number 3.71. so me being an idiot i for some reason decided that I was ok to not install it. after I followed every other step to the t the phone boots only to a black screen with the blue LED on ive waited and waited nothing shows. so i screwed it up. if anyone knows how to fix this let me know thanks. I also did anotehr stupid thing NO BACK UPS AT ALL... im really hating myself I know i didnt hard brick as I can still get to recovery. thanks again guys sorry for bad grammer fast typing at work.
dincdoes.me said:
Hey guys I searched but didnt find anyone else dump like me that didnt install the custom safestrap apk that comes in the packaged zip kitkat rom knoxraid. I was on the very first knoxraid (stock & rooted) also had safestrap installed with the same version number 3.71. so me being an idiot i for some reason decided that I was ok to not install it. after I followed every other step to the t the phone boots only to a black screen with the blue LED on ive waited and waited nothing shows. so i screwed it up. if anyone knows how to fix this let me know thanks. I also did anotehr stupid thing NO BACK UPS AT ALL... im really hating myself I know i didnt hard brick as I can still get to recovery. thanks again guys sorry for bad grammer fast typing at work.
Click to expand...
Click to collapse
Follow this thread. It happened to me twice so follow these steps that they posted and download all of the required steps. Remember to remove all samsung drivers like kies and samsung USB drivers. http://forum.xda-developers.com/showthread.php?t=2559715
JayWheelz said:
Follow this thread. It happened to me twice so follow these steps that they posted and download all of the required steps. Remember to remove all samsung drivers like kies and samsung USB drivers. http://forum.xda-developers.com/showthread.php?t=2559715
Click to expand...
Click to collapse
Damn. Thanks alot for the fast reply i really appreciate it!
dincdoes.me said:
Hey guys I searched but didnt find anyone else dump like me that didnt install the custom safestrap apk that comes in the packaged zip kitkat rom knoxraid. I was on the very first knoxraid (stock & rooted) also had safestrap installed with the same version number 3.71. so me being an idiot i for some reason decided that I was ok to not install it. after I followed every other step to the t the phone boots only to a black screen with the blue LED on ive waited and waited nothing shows. so i screwed it up. if anyone knows how to fix this let me know thanks. I also did anotehr stupid thing NO BACK UPS AT ALL... im really hating myself I know i didnt hard brick as I can still get to recovery. thanks again guys sorry for bad grammer fast typing at work.
Click to expand...
Click to collapse
dincdoes.me said:
Damn. Thanks alot for the fast reply i really appreciate it!
Click to expand...
Click to collapse
No problem. That's what the community is here for.
JayWheelz said:
No problem. That's what the community is here for.
Click to expand...
Click to collapse
Thats right
Edit:
nvm

Hard Brick .... PLEASE help, I've tried everything

So, I've tried literally every video, or walkthrough I could find via youtube or this site and I am still stuck in a boot loop right now at the unlock custom screen.
I've tried using odin to go back to stock completely, i've tried the battery removal / wipe data etc option, I don't know what else to do here.
If anyone could help, I'd really appreciate it. At this point I'm pretty desperate.
Which firmware version are you on? What were you doing when it bricked (flashing a ROM, rooting, etc)? Am I correct in assuming you're rooted because of the custom padlock icon?
Have you tried giving it a few minutes to boot up before pulling the battery? I thought my phone was bricked once, but all it needed was ~5 minutes to get going. Give it a good 10 minutes or so to boot up. If that doesn't work, report back with the information I requested and we'll go from there.
Face_Plant said:
Which firmware version are you on? What were you doing when it bricked (flashing a ROM, rooting, etc)? Am I correct in assuming you're rooted because of the custom splash screen?
Click to expand...
Click to collapse
MJ5 ... flashing FireNote Rom
Problem I was having is I was using KnoxRaid Rom, well that rom is dead / thread locked so I figured I would try FireNote. When I rebooted to flash FireNote, I noticed Safestrap wasn't there anymore. I tried re-installing Safestrap a few times with no luck. After a factory wipe / reset, Safestrap magically re-appeared and was available for me to use. I figured what the hell, I'll flash FireNote. When I did, I noticed it was more or less a hodge-podge of the two Rom's and not a clean install. When I did the wipe again to re-install FireNote, I'm now stuck at the spash screen and have been since early this morning.
And yea, I've given it quite some time ... 10+ minutes, even an hour. Nothing.
daigled said:
And yea, I've given it quite some time ... 10+ minutes, even an hour. Nothing.
Click to expand...
Click to collapse
try mj5 restore, if that fails just call AT&T and they will send you a new one free in the mail (takes about a week though)
BeastSpencer said:
try mj5 restore, if that fails just call AT&T and they will send you a new one free in the mail (takes about a week though)
Click to expand...
Click to collapse
I tried MJ5 restore. Maybe there's a different method I can try that you can point me to directly?
Were you on the Jellybean or KitKat version of Knoxraid? If you were on the KitKat version then the problem sounds like you tried to flash a JB ROM on top of a KK ROM without reverting back to JB first. Have you tried the MJ5 restore yet? I believe the thread is in the general section. I'll grab the link for you in a minute.
Edit- here's the link: http://forum.xda-developers.com/showthread.php?t=2559715
daigled said:
I tried MJ5 restore. Maybe there's a different method I can try that you can point me to directly?
Click to expand...
Click to collapse
really? are you sure you followed all steps? what happened when you finished? worked for my brick
Face_Plant said:
Were you on the Jellybean or KitKat version of Knoxraid? If you were on the KitKat version then the problem sounds like you tried to flash a JB ROM on top of a KK ROM without reverting back to JB first. Have you tried the MJ5 restore yet? I believe the thread is in the general section. I'll grab the link for you in a minute.
Click to expand...
Click to collapse
I think you're right. I was on the KK version and FireNote is on JB.
daigled said:
I think you're right. I was on the KK version and FireNote is on JB.
Click to expand...
Click to collapse
bad idea :/
BeastSpencer said:
really? are you sure you followed all steps? what happened when you finished? worked for my brick
Click to expand...
Click to collapse
Yea, definitely followed all the steps ... haven't moved from my computer chair for the last 6hrs lol. Only thing it did when I was finished is to go back to the splash screen and sit there.
Looks like Beast beat me to mentioning the MJ5 restore Check out the link I posted. Make sure you follow all of the steps EXACTLY how they're posted and you should be able to get going again.
daigled said:
Yea, definitely followed all the steps ... haven't moved from my computer chair for the last 6hrs lol. Only thing it did when I was finished is to go back to the splash screen and sit there.
Click to expand...
Click to collapse
as a last resort, you can call at&t i guess :/
try flashing MJ5 images from sammobile.com in odin
Face_Plant said:
Looks like Beast beat me to mentioning the MJ5 restore Check out the link I posted. Make sure you follow all of the steps EXACTLY how they're posted and you should be able to get going again.
Click to expand...
Click to collapse
I found that thread, followed it EXACTLY and still am having the same outcome =/
Maybe some of the files are corrupt. Try uninstalling Heimdall, the Microsoft plugins, delete everything you downloaded (Odin, the .tar files, etc), and redownload them and try again. On top of that, I would delete all of your USB drives and have Windows reinstall them or download them from Samsung's website. That way you will start nice and fresh and hopefully get out of this mess.
Face_Plant said:
Maybe some of the files are corrupt. Try uninstalling Heimdall, the Microsoft plugins, delete everything you downloaded (Odin, the .tar files, etc), and redownload them and try again. On top of that, I would delete all of your USB drives and have Windows reinstall them or download them from Samsung's website. That way you will start nice and fresh and hopefully get out of this mess.
Click to expand...
Click to collapse
Ok, I'll try that next... Thanks bro, i'll check back in after and let you know.
No problem. Let me know how it goes.
Oh, one more thing: have you tried different USB ports on your PC and/or different USB cables? In the past I've found that it's a must to use the USB cable that came with the phone for anything other than charging.
Face_Plant said:
No problem. Let me know how it goes.
Oh, one more thing: have you tried different USB ports on your PC and/or different USB cables? In the past I've found that it's a must to use the USB cable that came with the phone for anything other than charging.
Click to expand...
Click to collapse
Yea, I've used different ports and only used the cable that came with it from the start.
Good. I'm betting it's a bad file or something didn't install properly that's causing your problem. I've used the MJ5 restore several times to get off of KitKat versions of Knoxraid with no problems, so I don't see why it shouldn't work for you.
Here's a tip: when you place the CSC file and the 28whatever file on your external SD card, rename them to "flash first" and "flash second" or something like that to avoid mixing them up. Renaming them won't hurt anything.
daigled said:
Yea, I've used different ports and only used the cable that came with it from the start.
Click to expand...
Click to collapse
try restoring with N900AUCECMLG_OneClickBin.exe ...i think it should work. http://forum.xda-developers.com/showthread.php?t=2619941

[Q] Problems Installing - ★AMCHA Rom v5.00

So I've tried installing this half a dozen times, I did a full wipe I'm using the i9305 and installing this using both kernel options for the knox based bootloader, after it completes installation it says complete, reboot the phone and I end up stuck at the Samsung Galaxy s3 black screen and it never boots into the os.
I noticed while installing this it installs some modem not sure what one it is but I thought perhaps that was the issue, to installed went straight into download mode and flashed a optus modem i've been using for my phone rebooted but still same issue.
Would appreciate some help with this, I've tried searching the thread for similar issues no such luck.
Thanks
Demonic Wraith said:
So I've tried installing this half a dozen times, I did a full wipe I'm using the i9305 and installing this using both kernel options for the knox based bootloader, after it completes installation it says complete, reboot the phone and I end up stuck at the Samsung Galaxy s3 black screen and it never boots into the os.
I noticed while installing this it installs some modem not sure what one it is but I thought perhaps that was the issue, to installed went straight into download mode and flashed a optus modem i've been using for my phone rebooted but still same issue.
Would appreciate some help with this, I've tried searching the thread for similar issues no such luck.
Thanks
Click to expand...
Click to collapse
maybe your using a old recovery?
MaHo_66 said:
maybe your using a old recovery?
Click to expand...
Click to collapse
Thanks but it's not that, I wasn't even aware of having to use the newer one for the recovery till recently and have been using the one for the old recovery even tho I have the new one... either way, I tried installing both the new and old recovery's same results.
Demonic Wraith said:
Thanks but it's not that, I wasn't even aware of having to use the newer one for the recovery till recently and have been using the one for the old recovery even tho I have the new one... either way, I tried installing both the new and old recovery's same results.
Click to expand...
Click to collapse
i see, well your 2 posts away from being able to post in development thread, you will get better help in rom thread try a full wipe anyway and install the rom with default aroma settings, maybe the problem lies in some setting you change in aroma installer..
MaHo_66 said:
i see, well your 2 posts away from being able to post in development thread, you will get better help in rom thread try a full wipe anyway and install the rom with default aroma settings, maybe the problem lies in some setting you change in aroma installer..
Click to expand...
Click to collapse
True, that could be it, except i thought of that myself and just hit next next next to the end and hit install to see if it would help matters it didn't. Yeah I tried posting there to begin with, but even if your an advanced person you have to post here first lol fun times
I did think maybe there's a newer version of philz recovery out and mine just buggers it up some how it offers to install 6.41.6 not sure what my version is.. it crossed my mind tho but I wouldn't presume that's the most likely of causes.
Demonic Wraith said:
True, that could be it, except i thought of that myself and just hit next next next to the end and hit install to see if it would help matters it didn't. Yeah I tried posting there to begin with, but even if your an advanced person you have to post here first lol fun times
I did think maybe there's a newer version of philz recovery out and mine just buggers it up some how it offers to install 6.41.6 not sure what my version is.. it crossed my mind tho but I wouldn't presume that's the most likely of causes.
Click to expand...
Click to collapse
hmm.. well philz 6.41.6 is the latest one a.t.m and roms these days need up to date recovery so you can give it a shot if you are not on philz yet. here is the latest one http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
flash it with odin then try again, hopefully this will fix your problem
MaHo_66 said:
hmm.. well philz 6.41.6 is the latest one a.t.m and roms these days need up to date recovery so you can give it a shot if you are not on philz yet. here is the latest one http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
flash it with odin then try again, hopefully this will fix your problem
Click to expand...
Click to collapse
Yeah unfortunately that didn't work either, was worth a shot tho now I can post in the proper place.
Demonic Wraith said:
Yeah unfortunately that didn't work either, was worth a shot tho now I can post in the proper place.
Click to expand...
Click to collapse
haha yeah man

[Q] com.android.phone error on every rom

i have the virgn mobile HTC Desire 510 and i recently started experimenting with ROM's. The very first rom i flashed was RaptorRom 1.1 and i had no problems at all with it. But for some reason every other ROM i flash, it gives me the "Unfortunatley, the process com.android.phone has stopped" right at startup. it pop up ever seconds. does anyone know how to fix this? i have tried everything!
Floam said:
i have the virgn mobile HTC Desire 510 and i recently started experimenting with ROM's. The very first rom i flashed was RaptorRom 1.1 and i had no problems at all with it. But for some reason every other ROM i flash, it gives me the "Unfortunatley, the process com.android.phone has stopped" right at startup. it pop up ever seconds. does anyone know how to fix this? i have tried everything!
Click to expand...
Click to collapse
Did you happen to delete anything (bloat) when using RR. if so, most likely you deleted something you shouldnt have. Probably going to have to go back to the beginning and start over.
CSP III said:
Did you happen to delete anything (bloat) when using RR. if so, most likely you deleted something you shouldnt have. Probably going to have to go back to the beginning and start over.
Click to expand...
Click to collapse
Dirty flashing can cause this too.
CSP III said:
Did you happen to delete anything (bloat) when using RR. if so, most likely you deleted something you shouldnt have. Probably going to have to go back to the beginning and start over.
Click to expand...
Click to collapse
how can I reset my phone to how it came out of the box?
Floam said:
how can I reset my phone to how it came out of the box?
Click to expand...
Click to collapse
Heres a stock backup. Just Unrar and put in your backup folder on your SD in TWRP/Backups/FAxxxxxxxx/
Also theres a RUU somewhere on this forum, just don't know where.
LarryBoyG said:
Dirty flashing can cause this too.
Click to expand...
Click to collapse
Exact same thing I thought. That's why I wipe everything and I never have problems. Leave nothing to chance.
I am having this problem as well...
I placed the stock recovery in the TWRP folder and recovered 100% fine, but when I boot up my phone is still on RaptorRom GPE v2, still displaying, "Unfortunately, the process com.android.phone has stopped". Is there a problem here or am I not doing something right..?
**Also, I don't know if it's a hardware problem but my front camera is no longer working, looked everywhere on threads but nobody has addressed anybody else with this problem
(This is also happening with every other ROM I am trying to flash)
,thanks in advance.
ThePluviophile said:
I placed the stock recovery in the TWRP folder and recovered 100% fine, but when I boot up my phone is still on RaptorRom GPE v2, still displaying, "Unfortunately, the process com.android.phone has stopped". Is there a problem here or am I not doing something right..?
**Also, I don't know if it's a hardware problem but my front camera is no longer working, looked everywhere on threads but nobody has addressed anybody else with this problem
(This is also happening with every other ROM I am trying to flash)
,thanks in advance.
Click to expand...
Click to collapse
Are you doing a complete wipe of the caches, system and internal storage? You should be wiping them all except the SD card and the usb-otg ones otherwise you're dirty flashing. Regarding the camera, flash a different kernel.
Same problem here...... Any solution?
Hello. Ive been searching around for a solution to my problem and found this thread.
I tried all the suggestions on this thread and still no luck. If anyone has an answer or
a suggestion Im all ears and Thank You in advance.
LarryBoyG said:
Heres a stock backup. Just Unrar and put in your backup folder on your SD in TWRP/Backups/FAxxxxxxxx/
Also theres a RUU somewhere on this forum, just don't know where.
Click to expand...
Click to collapse
im having a problem with google play store. i have the rh-01 error. i tried reinstalling it but i still have that problem. can u please help me. sorry for asking

Idea to try restoring system after update.

Okay, so before I found anything about custom ROM or anything, I'd already updated the system to 6.6. So, common knowledge seems to indicate that I can't do much to restore stock.. But what I was wondering, would it be possible to fastboot into twrp and flash one of the pre-update roms, them follow normal conventions to flash twrp? I've seen similar questions asked, but the threads are stale, and no suggestions how. So, is there anyone who can test if such a process can work? Otherwise, is there a stock ROM that I could zip, sign, if it's possible to sign a zip, and install through stock recovery as update.zip? When I've tried to hard boot into recovery, it just says no command found, but there should have to be a way to interact with the stock recovery. I'm just throwing out ideas, but if anyone knows anything, please let me know.
What about dirtycow?
cyanix-tech said:
What about dirtycow?
Click to expand...
Click to collapse
Once I get another phone, I'll give dirtycow a shot. If it does indeed work, I'll post back and let you know. I should have a new phone coming sometime next week.
magus7091 said:
Once I get another phone, I'll give dirtycow a shot. If it does indeed work, I'll post back and let you know. I should have a new phone coming sometime next week.
Click to expand...
Click to collapse
This has been done already v6.6 has been cracked. Over 2 months ago
http://forum.xda-developers.com/r1-hd/how-to/blu-r1-hd-v6-6-dirtycowed-f-amazon-root-t3490882
mrmazak said:
This has been done already v6.6 has been cracked. Over 2 months ago
http://forum.xda-developers.com/r1-hd/how-to/blu-r1-hd-v6-6-dirtycowed-f-amazon-root-t3490882
Click to expand...
Click to collapse
Thanks! I didn't have a backup to even try dirtycow before. Can't wait to get this thing rooted and ROMed. :good::good:

Categories

Resources