[Q] How to remove Dual Core Technology logo - Motorola Atrix HD

So I bricked my phone then I downloaded the stock 4.1.1 firmware and myth tools and unbricked it and the dual core technology logo keeps showing up even though I changed the boot animation the bootloaders unlocked I'm running CyanogenMod 10.2. Also the bootloader unlocked warning doesn't show up it just shows the dual core logo then the boot animation

Go into CWM and flash the zip I have attached. It replaces the Dual Core logo and it looks much nicer
There isn't a way to entirely remove boot splash, but this one is very nice. I got it from Youngunn's thread on boot logos, this isn't my work.
First post on page 2 is what it looks like: http://forum.xda-developers.com/showthread.php?t=2383108&page=2

Related

XT860 Boot Animation

...Hey all. I've been running a rooted (thanks psouza!) XT860 with Hashcode's tweaked Bootstrap recovery for about a month now with nary an issue, but yesterday something weird happened..
The usual boot animation is of course the red "Dual Core" Motorola logo, that then begins to throb, or pulsate or whatever...but yesterday I re-booted the phone and now the old, plain "android" text, boot animation comes up...the same one that use to be on my old Milestone.
It's not a problem per se, but is there any obvious reasons for this spontaneous boot animation switcheroo? where did this old animation even come from?
LifeInAnalog said:
...Hey all. I've been running a rooted (thanks psouza!) XT860 with Hashcode's tweaked Bootstrap recovery for about a month now with nary an issue, but yesterday something weird happened..
The usual boot animation is of course the red "Dual Core" Motorola logo, that then begins to throb, or pulsate or whatever...but yesterday I re-booted the phone and now the old, plain "android" text, boot animation comes up...the same one that use to be on my old Milestone.
It's not a problem per se, but is there any obvious reasons for this spontaneous boot animation switcheroo? where did this old animation even come from?
Click to expand...
Click to collapse
I had that happen after trying to change my boot animation
Sent from my rooted xt860

Dual Boot Problem

Halloe Community,
I tired to get real dual boot with this instruction: http://forum.xda-developers.com/showthread.php?t=1856090
But after the flashing my device is not able to reboot again. It only boots on the first screen with the white LG logo, after that it boots again but there is again only the LG logo. What can I do now to get dual boot?
Maxiss1998
NVFlash homero rom without replacing the config file, I got my 1st rom working, bootloop on 2nd......didn't have more time, then you need to repeat the whole process. Will let you now when I find the reason for bootloop

[Q] How to Reset Splash Screen

I have a bootloader unlocked Moto X and I've flashed a custom splash screen to my device. However, I'd like to reset the splash screen so it updates so it'll match the seasonal boot animation (currently the spring animation has a green moto logo). Does anyone know the command to wipe the custom splash screen and return to the default/seasonal one?
Thanks!
Browse through the themes and apps section, I'm sure its posted there.
When the phone starts up, you first see the static bootlogo (default is the Moto "M")... after that you see the boot animation. So what do you mean by "splash screen"?
If you have never unlocked the bootloader, the bootlogo is the CLOGO.BMP. If you have an Unlocked bootloader, or you've unlocked/relocked your bootloader, its the LOGO.BIN file.
The Motorola Boot Services app replaces the the bootloogo via replacing the CLOGO.BMP, and switches out the boot animation file on its internal schedule depending on location. You won't see the CLOGO.BMP switch if your bootloader is unlocked (because you'll be using the LOGO.BIN instead), but you will see the boot animation switch just fine.
So if you have an unlocked bootloader and want to replace the boot logo, you'll have to manually flash the logo.bin via mfastboot. See -> http://forum.xda-developers.com/moto-x/themes-apps/moto-x-boot-logos-t2417961 and start around post #140 and post #150 of that thread for info on making your own, as well as a ZIP containing some premade/converted (including the Spring, Fall and Winter from Moto Boot Services, and the defaults), and there is some good discussion later in that thread (starting around post #300).
KidJoe said:
When the phone starts up, you first see the static bootlogo (default is the Moto "M")... after that you see the boot animation. So what do you mean by "splash screen"?
If you have never unlocked the bootloader, the bootlogo is the CLOGO.BMP. If you have an Unlocked bootloader, or you've unlocked/relocked your bootloader, its the LOGO.BIN file.
The Motorola Boot Services app replaces the the bootloogo via replacing the CLOGO.BMP, and switches out the boot animation file on its internal schedule depending on location. You won't see the CLOGO.BMP switch if your bootloader is unlocked (because you'll be using the LOGO.BIN instead), but you will see the boot animation switch just fine.
So if you have an unlocked bootloader and want to replace the boot logo, you'll have to manually flash the logo.bin via mfastboot. See -> http://forum.xda-developers.com/moto-x/themes-apps/moto-x-boot-logos-t2417961 and start around post #140 and post #150 of that thread for info on making your own, as well as a ZIP containing some premade/converted (including the Spring, Fall and Winter from Moto Boot Services, and the defaults), and there is some good discussion later in that thread (starting around post #300).
Click to expand...
Click to collapse
Right, by splash screen I meant the boot logo. For some reason my boot logo is still the default Moto X logo, rather than the seasonal one, even though the bootanimation is the spring animation. I wondered why the Motorola Boot Services didn't overwrite the old one with the seasonal logo. I'll keep trying to figure it out.
Sonicmax2k2 said:
Right, by splash screen I meant the boot logo. For some reason my boot logo is still the default Moto X logo, rather than the seasonal one, even though the bootanimation is the spring animation. I wondered why the Motorola Boot Services didn't overwrite the old one with the seasonal logo. I'll keep trying to figure it out.
Click to expand...
Click to collapse
Because. As I said.. since you have an unlocked bootloader, your phone uses the LOGO.BIN for the boot logo... BUT Moto Boot Services only replaces the CLOGO.BMP which is the boot logo for LOCKED bootloaders along with changing the boot animation (which is the same for locked and unlocked).
Moto Boot services does not touch Logo.bin. So if you have an unlocked or relocked bootloader, you have to flash logo.bin with mFastboot yourself if you want to change the boot logo.
I've converted the Moto Boot Services CLOGO.BMP files for stock, winter, spring and fall to Logo.bin's, and they in the ZIP attached to post #150 of that other thread.
KidJoe said:
Because. As I said.. since you have an unlocked bootloader, your phone uses the LOGO.BIN for the boot logo... BUT Moto Boot Services only replaces the CLOGO.BMP which is the boot logo for LOCKED bootloaders along with changing the boot animation (which is the same for locked and unlocked).
Moto Boot services does not touch Logo.bin. So if you have an unlocked or relocked bootloader, you have to flash logo.bin with mFastboot yourself if you want to change the boot logo.
I've converted the Moto Boot Services CLOGO.BMP files for stock, winter, spring and fall to Logo.bin's, and they in the ZIP attached to post #150 of that other thread.
Click to expand...
Click to collapse
Yup! I've used those and they look really nice, it's just too bad that I'll have to flash them on my own rather than have the app do it automatically. It's kind of an inconvenience. Oh well, small price to pay.

g920t not booting, missing bootup/splash screen

I have a g920t that is not booting up (since i tried to put on the metro 5.1.1).. i have tried odin flashing different samsung firmwares (has to be 5.1.1 as i updated bootloader). i have also installed twrp 2.8.7.0. and tried to put on ozop which loads witha splash screen of m choosing during rom setup but on first boot gets to starting apps and stays (i left on for over 24hrs) and upon reboot it just stays on the splash screen..
I would really like some help to revive this phone. thanks for any options.

change boot logo

I have a rooted moto g5s plus.
I flashed a boot logo few months back.
But now when i am flashing a new boot logo, it is not changing the logo while booting.
There is same logo everytime.
My present logo is very bright which i dont like.
Please guide to change the logo.
goviin said:
I have a rooted moto g5s plus.
I flashed a boot logo few months back.
But now when i am flashing a new boot logo, it is not changing the logo while booting.
There is same logo everytime.
My present logo is very bright which i dont like.
Please guide to change the logo.
Click to expand...
Click to collapse
Install the boot animation for super user from play store and then flash the boot animation which you want.
riyan65 said:
Install the boot animation for super user from play store and then flash the boot animation which you want.
Click to expand...
Click to collapse
I want to change boot logo, not, boot animation.
goviin said:
I want to change boot logo, not, boot animation.
Click to expand...
Click to collapse
Here is the thread for boot logo change.
https://forum.xda-developers.com/moto-g5s-plus/themes/bootlogo-bootanimation-t3848572/post77755936
Update the recovery to latest twrp.
Then install the zip.

Categories

Resources