Hello evrybody,
I came here from sensation xda theard because:
Yesterday night a friend ask me to activate him the 3g mobile data on a tablet, I tooked out the sim from the tablet to put it in my phone an I9000 factory unlocked and then to check the apn settings to set them in the tablet, I saw the settings and did the correct settings but when I put back my sim in the phone the phone ask me for network unlock code ..... I check also the sim in another phone and guess what, the sim is broken I will go to replace it but what shell I do with the phone wich is asking me about the sim unlock code I tried allso to flash it with original firmware by odin and allso I put inside a good sim from the same carrier..... Please help me
Insecret said:
asking me about the sim unlock code
Click to expand...
Click to collapse
IF you had USIM card lock activated in settings>locations and security>.setup USIM card lock> you need to untick lock USIM card and remove password.
If you did not activate it, try 00000 or 0000 (would be default password) not too sure look up your user manual would have information concerning it. You can download user manual from PIT STOP link below
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Related
I have this Samsung Galaxy S I9000 model device. I have using it before but I got a new one and was planning on rooting this one and changing his current firmware. So I factory reseted the device and now when I connect it to the pc it just starts charging no app opens just pop ups the mtp application eindow but still pc doesn't detect it and samsung kies also doesn't detect it. The pc detects my other s2 and my s3 but this s1 no doesn't get detected. I even putted it on download mode to check if odin detects it and no. What the problem could be? How can I fix it?
Probably your usb socket has bad contact or similar.
Try to press to different sides may be it will have connection temporary.
maiquito said:
What the problem could be? How can I fix it?
Click to expand...
Click to collapse
First you must have it on Debug Mode
To enter Debug Mode ....touch menu > settings > Applications >Development > Tick USB debugging
If still have problem and it goes into MTP mode, use this fix
if still problem, read this and apply what need to
Check this out!You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, please click on the Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
Drivers may be an issue...
Try downloading and running the drivers again... Maybe that can help!
Hello,
my i9000 is running in stock value pack xxjw4 realesed by samsung,i tried to update my device firstly started from flashing new Cf-root kernel v4.4(as told by one of the senior member)
but after i flashed the kernel,problem started
1.my device is not getting any network(so no phone calls no msgs)
2.i have 368 mb ram but still my phone shows 124 mb used and 25 mb left!!whats this??my phone started blinking like it shows home screen and goes black again it shows home screen and goes black.
Please someone help me,tell me how to get rid of this.
Thank you all.
Sent from my SGH-I9000 using xda app-developers app
Sent from my SGH-I9000 using xda app-developers app
kumar shivam said:
Hello,
my i9000 is running in stock value pack xxjw4 realesed by samsung,i tried to update my device firstly started from flashing new Cf-root kernel p
Click to expand...
Click to collapse
you already posted this in Q&A that's where it belongs. Do not open too many threads, as you have opened others also, its best to continue your problems and requests in one thread only, not open a thread for every question.
Check this out! You , YES! you are an " Android ". Not your phone but U.
You Must watch this documentary concerning your privacy Terms & Conditions we had agreed to, by using a PC or Smartphone
How to say Thank you? If you find any post helpful on XDA, click on their Thanks button
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you are using XDA App or Tapatalk, long press on the post and select :good: Thanks Its easier to give "Feedback" in this manner than make an additional post.
sim unlock for internatinonal network for lg g4 sprint no need root can upgrade ota without sim lock/invalid sim again...
all version lg ls991 zv9/zv6/zv5/zv4...
MOD EDIT: LINK REMOVED
Do not used XDA to spam links to your YouTube channel.
THREAD CLOSED
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hey, how can i do this?
can you help?
Please read the rules! XDA is for free Method not for promotion your services... if you not a posted method for unlock in Android 6 delete this Thread.
Lussardi said:
Please read the rules! XDA is for free Method not for promotion your services... if you not a posted method for unlock in Android 6 delete this Thread.
Click to expand...
Click to collapse
no service here I want confirm that phone can be unlock but need unlock via box from zv5/zv6
hsrose11 said:
no service here I want confirm that phone can be unlock but need unlock via box from zv5/zv6
Click to expand...
Click to collapse
nop Box only unlock ZV4 and ZV5... manually unlock for ZV6 and above...
good day.
unlock from zv5/zv6 and upgrade to zv9!
Friend,
Please helped me how to unlock APN setting on sprint? Mine greyed out even has set APN my local SIM card right... Still no data
Thanks
adrs168 said:
Friend,
Please helped me how to unlock APN setting on sprint? Mine greyed out even has set APN my local SIM card right... Still no data
Thanks
Click to expand...
Click to collapse
You cant change apn settings unless you create them. So make a new apn and it wont be greyed out.
I have same thing. Everything works but no data. Even i try apn but still no result. So i am on zv6 now. If anybody have solution please let me know.
thank you!
someone can help me, I lost the mobiles data since upgrade to 6.0 ZVA not up 3G I'm using it outside the United States in GSM mode or simply globally . in the names of the access point you are in the apn one that just says ! ota sn ! the cause of this will not raise the mobile internet ?, someone has found the solution?
Hi Guru's,
Forgot the pattern lock on samsung A30 mobile. Is there anyway to remove it without losing data. I am ready to pay(send paypal) for the help.
I tried some options on internet, but did not work.
Regards,
Venkat
+1-262-408-9278
It will be the same pattern you used yesterday, last week and last month.
You must of also had another method to unlock as well like a figure print or pin number.
sammiev said:
It will be the same pattern you used yesterday, last week and last month.
You must of also had another method to unlock as well like a figure print or pin number.
Click to expand...
Click to collapse
Please help if you know work around.
vnaidu2010 said:
Hi Guru's,
Forgot the pattern lock on samsung A30 mobile. Is there anyway to remove it without losing data. I am ready to pay(send paypal) for the help.
I tried some options on internet, but did not work.
Regards,
Venkat
+1-262-408-9278
Click to expand...
Click to collapse
Hi, I will help you. In orange fox twrp can delete your password without loss data. If you need, I can write in more detail how to do it.
SirKosichka said:
Hi, I will help you. In orange fox twrp can delete your password without loss data. If you need, I can write in more detail how to do it.
Click to expand...
Click to collapse
Still trying it, can you please reply with more details.
vnaidu2010 said:
Still trying it, can you please reply with more details.
Click to expand...
Click to collapse
Go to twpr and flash orange fox. Go to settings in twrp and flash add-on password remover. Remove password
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you have TWRP, open the File Manager and at /data/system delete this files.
After that, just reboot and profit!
Hi, I found working method for backing up QCN via QFIL (QPST). Also You can enable some modes for diagnostics and engineering/testing/unlocking vowifi or volte.
Firstly You need to Authokendecrypt after entering *#9434* using Oppo Free Unlocker or Secrecy Unlocker (easy to find on Google or xda in region change topics). Then enter *#649010# and to unlock any option You need to enter Confirm code which is 6776 and You are ready to go to backup or restore IMEI and many more. I will upload full list of Engineer Codes pulled out from firmware, just need to get to my pc. Feel free to ask questions, i will try to help. Maybe we can find out something interesting. Im digging to find a way to root or unlock bootloader ofcourse... Or at least how to change region to Vietnam or India to unlock via official deeptesting app.
Interresting thingy... any new findings?
Changing region doesn't help, also no DeepTesting in India or China :-(
To enter the Engineering Mode: dial *#899#
and the code is *#9434*
how to turn on vowifi? This option doesnt exist Anyway
Any 1 tried with Engineer mode togle on.
It puts a phone connected with PC to communicate with phone with specified driver
SDM720G-IDP Quallcomm driver ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This should be the way to diagnose a lot of stuff ...
SnapDragonMobile 720G ?
Damn, those VM ware drivers and windows machine
Didn't see it ...
Now doing the things I can ... repack without the check ... Will try ...
QPST is now enabled, finnaly ...
Flashing enabled without using tools
Thank you @matiirk , but will be nice if you point it out before ... To much of my time has passed almost 4 nothing.