Looking for Nandorid for 2.24.707.3 - One (M7) Q&A, Help & Troubleshooting

Hi everybody.
Suddently, my One cannot boot up. And i did not have a backup Nandroid for it
Very sad.
Is there anybody can help to provide the nandroid for 2.24.707.3.
I'm trying to find on internet but get no luck.
Thanks in advance.

1. You post a question in Q&A
2. I said post it in the RUU/OTA/Nandroid thread - not to start a new thread
You clearly didn't read the other thread properly as I just found one that should work here:
http://forum.xda-developers.com/showthread.php?t=2383508

EddyOS said:
1. You post a question in Q&A
2. I said post it in the RUU/OTA/Nandroid thread - not to start a new thread
You clearly didn't read the other thread properly as I just found one that should work here:
http://forum.xda-developers.com/showthread.php?t=2383508
Click to expand...
Click to collapse
sorry friend that wont work properly if you want to relock bootloader i am also in search of 2.24.707.3 for CID__038 but unable to find it. I hope someone can help us both.
it may be asking too much but any great soul with super cid can flash CID__038 ruu update to 4.2.2 and upload it here but i know thats a hell lot to ask for
---------- Post added at 10:22 PM ---------- Previous post was at 10:14 PM ----------
http://www.htc1guru.com/dld/guru_reset_m7_2-24-707-1-zip/
hey use this link to download stock software. Only difference being you have a GSM model and its a backup of GSM+LTE model. you can use it om your phone with custom recovery without any hassel just do not relock bootloader or else phone wont boot up until you unlock bootloader again
and when you find 2.24.707.3 share it with me and we both can restore back to stock

It should work but if not then you can try that other one you've linked to (which is the same version I linked to)

Related

restoring Dell Streak 10 Pro stock rom, plz advise!

Hi i had rooted my dell streak 10 pro few months back and had cyanogenmod rom since then, now i want to install stock ROM again, i dont know how to do that , i have searched the internet but haven't found clear procedure of doing it ...
Hi Mani .. i cam across this link http://d-h.st/users/TheManii/?fld_id=1677#files but not sure how to install pkg file ... could you please guide !
Thanks in advance
abart83 said:
Hi i had rooted my dell streak 10 pro few months back and had cyanogenmod rom since then, now i want to install stock ROM again, i dont know how to do that , i have searched the internet but haven't found clear procedure of doing it ...
Hi Mani .. i cam across this link http://d-h.st/users/TheManii/?fld_id=1677#files but not sure how to install pkg file ... could you please guide !
Thanks in advance
Click to expand...
Click to collapse
any friend ?
First of all this is in the wrong section. This is development for the Streak 7...but I have a question...how did you post the first post and then go back in time and post again over the future post??
---------- Post added at 10:16 PM ---------- Previous post was at 10:12 PM ----------
First of all you need to tell us what recovery you have. What Rom you have currently, and what firmware you are trying to restore to?
greenzone560 said:
First of all this is in the wrong section. This is development for the Streak 7...but I have a question...how did you post the first post and then go back in time and post again over the future post??
---------- Post added at 10:16 PM ---------- Previous post was at 10:12 PM ----------
First of all you need to tell us what recovery you have. What Rom you have currently, and what firmware you are trying to restore to?
Click to expand...
Click to collapse
i am sorry if i have posted it wrong section, I just needed help still needs help from somebody!
I did installed Cyanogen Mod 9.0 in my dell streak pro since this tab doesn't support android market , CM rom is great but camera does not work in it, so i just want to roll it back to its original stock ROM since i have no any other option to use camera feature !
my tab has Team Win Recovery!
abart83 said:
i am sorry if i have posted it wrong section, I just needed help still needs help from somebody!
I did installed Cyanogen Mod 9.0 in my dell streak pro since this tab doesn't support android market , CM rom is great but camera does not work in it, so i just want to roll it back to its original stock ROM since i have no any other option to use camera feature !
my tab has Team Win Recovery!
Click to expand...
Click to collapse
1. You can download an app called goomanager.apk (google it) then transfer it to your phone and install. In the app tap on the button where it says "search compatible roms" then install the rom.
2. You can try googling how to get back to stock for your tablet.
3. Ask someone in the xda streak 10 forums.
OP please lock this thread. Thanks.

[Q] new to htc devices want to unlock the bootloader and root and custom rom

Hello as I said in the title I want to unlcock the bootloader and have a custom Rom
But I really don't know how to unlock
I visited htcdev and it said I should Have android sdk but don't know how to install it cuz I didn't have to use it before
I want someone to help me by tomorrow or today
In a simple guide how to
.unlock the bootloader
.custom recovery
.root
.install custom Rom where I should but the zips
Thnx xda
Iloudsan said:
Hello as I said in the title I want to unlcock the bootloader and have a custom Rom
But I really don't know how to unlock
I visited htcdev and it said I should Have android sdk but don't know how to install it cuz I didn't have to use it before
I want someone to help me by tomorrow or today
In a simple guide how to
.unlock the bootloader
.custom recovery
.root
.install custom Rom where I should but the zips
Thnx xda
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2260376
Please don't do it. Spend a few days reading about it. You are certainly NOT ready
---------- Post added at 04:51 PM ---------- Previous post was at 04:50 PM ----------
Specially when there are so MANY guides how to do that.
I'm afraid for your device
Please be clear I dont get what u mean
Give me some links if u can
Iloudsan said:
Please be clear I dont get what u mean
Click to expand...
Click to collapse
Ive provided you with the link to the video guide. You can follow that and post doubts if you have any.
But TBH, there are a BAZZILLION guides on XDA, soooo many YouTube videos, and guides on practically any tech website. I think you should read the guides and watch the videos properly before attempting.....
Iloudsan said:
Please be clear I dont get what u mean
Click to expand...
Click to collapse
Exactly what they are saying.. YOU DONT UNDERSTAND....
Q&As are littered with people who obviously have not read any of the guides that have been written.. @nkk71 @crushalot to name but two have spent hours writing guides for noobs and people like me.. We are all still learning..
And before you go down the rooting, S-Off, custom rom, kernal etc.. Ask yourself.... Is it for me.. More people have trouble getting back to stock than they do rooting their phone... So READ....READ...READ
Sent from my Nexus 7 using XDA Premium 4 mobile app

[Q&A] [ROM][T][UB][SONY-UI] NeoWave™ - Version 1.2.2 out! Fixed installation issues!

[Q&A] [ROM][T][UB][SONY-UI] NeoWave™ - Version 1.2.2 out! Fixed installation issues!
Q&A for [ROM][T][UB][SONY-UI] NeoWave™ - Version 1.2.2 out! Fixed installation issues!
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Oohhlala said:
plz make this ROM works on X-TX :silly:
Click to expand...
Click to collapse
(a copy posting from the xperia V forum, because it still applies, only another filename here
Ok, so I've installed several MODs on my Xperia T over time, always just by following the instructions, but always worked. I however don't really understand what does what.
I already tried the 1.2.1 version with the bootloop as a consequence, so was temporary on a stock rom again. But saw all the good reviews here, so wanted to give it another go.
So I followed instructions again:
- Bootloader unlocked and root access... check!
- Boot to recovery (TWRP 2.3.3.0)... check!
- I want to install it clean, so did a factory reset and System wipe (as said in the instructions)... check!
- Flash neo-4.4.4-mint-1.2.2.zip... hmmm:
"[..]
... Creating SymLinks ...
set_metadata_recursive: some changes failed
E:Error in [path/filename] (status 7)
Error flashing zip '[path/filename]
Updating partition details..."​What could have gone wrong?
Sorry, double post..
It might be a broken zip or a bad recovery.
I suggest installing the boot.img from the rom via Flashtool, then booting to recovery and flashing the rom.
Perhaps you might also want to redownload the zip file, just to be sure.
Noone else had issues like that.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
Any moderator, feel free to close this thread, as I've changed my DevDB settings to allow anyone to comment in the original rom thread. :good:
WhiteNeo said:
It might be a broken zip or a bad recovery.
I suggest installing the boot.img from the rom via Flashtool, then booting to recovery and flashing the rom.
Perhaps you might also want to redownload the zip file, just to be sure.
Noone else had issues like that.
---------- Post added at 08:22 PM ---------- Previous post was at 08:21 PM ----------
Any moderator, feel free to close this thread, as I've changed my DevDB settings to allow anyone to comment in the original rom thread. :good:
Click to expand...
Click to collapse
Thanks a million for the boot.img tip... That did the trick. (guess there was something wrong with my version of TWRP)
I'm fully enjoying your NeoWave rom now
ceedees said:
WhiteNeo said:
It might be a broken zip or a bad recovery.
I suggest installing the boot.img from the rom via Flashtool, then booting to recovery and flashing the rom.
Perhaps you might also want to redownload the zip file, just to be sure.
Noone else had issues like that.
Thanks a million for the tip boot.img... That did the trick. (guess there was something wrong with my version of TWRP)
I'm fully enjoying your NeoView rom now
Click to expand...
Click to collapse
Glad to hear. Make sure to give some feedback in the thread if you like NeoWave
Click to expand...
Click to collapse

[Q&A] [PhilZ-cwm6][n7000] Stock Kernel+CWM6+Root+exFAT+NTFS-LTA

Q&A for [PhilZ-cwm6][n7000] Stock Kernel+CWM6+Root+exFAT+NTFS-LTA
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Hi Everybody,
I'm looking for JZO54K.N7000XXLTD
CSC code ERA
normal zip package
Can I install XXLT6 instead from xxltd?
Thanks
Try the XXLTA
XXLTA?
I don't see any link for that in above thread
raktut said:
XXLTA?
I don't see any link for that in above thread
Click to expand...
Click to collapse
There is. Just look in post number 3.
nokiamodeln91 said:
There is. Just look in post number 3.
Click to expand...
Click to collapse
still nothing...
Look harder...
All there.
Please help
Hi, I'm not a developer but I'm trying to root my phone and install CWM so I can increase my ROM. I use a Samsung Galaxy Note n7000. I tried following the instructions in the tutorials but I'm not very conversant with the tech language. My phone's kernel version - 3.0.31-704944 (or at least, that is what I can see there), and I can't seem to find the code anywhere in the posts. Can you please give me step by step guidelines and instructions (links to download files too) that can help me solve this dilemma?
Thanks.
Briggs.
- I'm not a developer
- I can increase my ROM
- I'm not very conversant with the tech language.
and
- Can you please give me step by step guidelines and instructions (links to download files too)
Especially the last one is already there. No need to repeat it. You only need to search and start reading and learning.
But when I read the first 3 quotes again my advive: stay on stock if you do not have an absolute reason for installing a custom rom
Hi!
Currenty I'm running a stock firmware for Russia (region SER) on my device (GT N7000):
PDA: N7000XXLTC
PHONE: N7000XXLT3
CSC: N7000OXELT1
(built Tue Nov 26 21:46:47 KST 2013)
Does it mean that a PhilZ-cwm6 suitable for this firmware isn't instantly ready? Or maybe I simply haven't noticed it? Probably I should ask to create a new one?
Thank you in advance.
Use the XXLTA one. It works on the rom you have.
hello,
for sgn gt-n7000B what version to use?
@nokiamodeln91 unfortunately I can't find any `xxlta` version in the post #3. Should I look for it somewhere else? Or maybe I should build it myself (and then publish somewhere)?
UPD: I've checked the source of the starting page of the main thread, and now pretty sure, that there's no xxlta on the page, even under the cuts (post #4). And I have noticed that I'm not the first in the thread who can't find it there. Please help us
UPD2: @raktut I have found N7000_LTC_kernel_CWM6-Touch_signed.zip with PhilZ kernel on another PDA-centric forum 4pda.ru (sorry, only in Russian), in the thread dedicated to GT-N7000. I haven't checked it myself yet, only saw "thanks" from other members of the forum, thus no direct link. But if you still need it, drop me a message.
BTW, what's the difference between the two, xxlta and xxltc? As I understand it's the version of whole firmwares, and there should be no or little difference when it comes down to Linux kernel, bootloader and minimal operating environment (busybox? or it uses other technology to create a minimal environment?). Maybe I could simply check kernel version, donna, busybox version etc of the published ZIP's and then choose an appropriate one?
Thank you for your response.
Noob question
Hi just wanna ask some questions regarding flashing the kernel is the internal memory gonna be wiped when I do this. Sorry for the noob question just new to this. thank you for the reply.
MJ1005 said:
Hi just wanna ask some questions regarding flashing the kernel is the internal memory gonna be wiped when I do this. Sorry for the noob question just new to this. thank you for the reply.
Click to expand...
Click to collapse
No it won't. But flashing the WRONG kernel WILL WIPE OUT your phone.
---------- Post added at 05:22 PM ---------- Previous post was at 05:15 PM ----------
just_regged said:
@nokiamodeln91 unfortunately I can't find any `xxlta` version in the post #3. Should I look for it somewhere else? Or maybe I should build it myself (and then publish somewhere)?
UPD: I've checked the source of the starting page of the main thread, and now pretty sure, that there's no xxlta on the page, even under the cuts (post #4). And I have noticed that I'm not the first in the thread who can't find it there. Please help us
Thank you for your response.
Click to expand...
Click to collapse
Where,why n how did you not able to find it? Go to phils page post#3, scroll down and hit the link given beside the word "tw only" which is below "cm only" and you will find XXLTA there.
Noob question again
Jackwu696 said:
No it won't. But flashing the WRONG kernel WILL WIPE OUT your phone.
tnx for the reply. btw for a noob like me which would you prefer that i use for flashing the recovery mode or odin mode?
please correct me if i'm wrong i have an attached image the circled letters would be the one that i will look for right? then i have to go to post # 3 click tw only link and look for the DDLSC version 5.11.2 file right? sorry if i have many questions.
Click to expand...
Click to collapse
MJ1005 said:
Jackwu696 said:
No it won't. But flashing the WRONG kernel WILL WIPE OUT your phone.
tnx for the reply. btw for a noob like me which would you prefer that i use for flashing the recovery mode or odin mode?
please correct me if i'm wrong i have an attached image the circled letters would be the one that i will look for right? then i have to go to post # 3 click tw only link and look for the DDLSC version 5.11.2 file right? sorry if i have many questions.
Click to expand...
Click to collapse
In my personal opinion, I'd rather suggest recovery rather than odin unless of course it's stated that u have to use odin to flash. Always go for the recovery whenever available.
Yes. Search for DDLSC vers. Find the zip. not the tar.md5 and flash it in recovery n u should be just fine. Happy flashing n glad to be of help
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
Succes
Tnx for the help everything went well successfully flashed the kernel. Everything is working.
How to reverse the ODIN flash of the .tar file
I used the ODIN method to root my phone, however for some reason, the phone did not get rooted, now i am trying to undo what I did.
I am a newbie to this techie stuff and not sure what I should be doing.
I would like to use the Install Root via Stock Recovery Update zip method. I loaded the file on my ext SD card and followed the steps and got error 7. Please help.
All I want to do is get rid of the insufficient memory problem because of which I am not able to install or upgrade my apps.
My log file are consuming over 1000 MB of space and I would like to clean it up. I read that rooting the phone will give me access to do so, however that did not happen, im guessing it was a root error.
Please advise.
Thank you
---------- Post added 10th November 2014 at 12:07 AM ---------- Previous post was 9th November 2014 at 11:52 PM ----------
Hi
I have GT N7000 with build DDLSC.
This is the 1st time that I have tried to root my phone and i used the ODIN method to flash the .tar file and then rooted my phone by loading the root file on my ext sd card. But I still did not get access to the system logs that I intended to delete.
I then uninstalled the root file as directed and tried the no touch method. However while the package was installing it gave an error 7. Not sure what that is.
I keep getting "insufficient memory" message everytime I try to install or upgrade an app. I saw using the diskusage app that most of the space is consumed by the system.
Can you please help me solve this problem and undo the ODIN based process that I had used.
Thank you
Flash Philz kernal without sd card?
Hi, quick question, is it possible/safe to flash philz kernal from inside recovery using the phones internal memory and not an external SD card? I don't have an SD card on hand and would prefer not to use Odin.

[Q&A] Mobile Hotspot modded to skip provisioning check (VZW)

Q&A for Mobile Hotspot modded to skip provisioning check (VZW)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Mobile Hotspot modded to skip provisioning check (VZW). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
verizon lg g2 hotspot problem
hi
i did it my way, but... (see pic.)
is there some other way? or what can i do with this? maybe i made some mistake, but i think i did everything as it is written here, by instruction
can i fix this problem?
i had verizon phone, unlockedb for gsm. it was demo mode phe and i rooted and upgrated it. now i want share my 3g but something is wrong
1myway1 said:
hi
i did it my way, but... (see pic.)
is there some other way? or what can i do with this? maybe i made some mistake, but i think i did everything as it is written here, by instruction
can i fix this problem?
i had verizon phone, unlockedb for gsm. it was demo mode phe and i rooted and upgrated it. now i want share my 3g but something is wrong
Click to expand...
Click to collapse
Give this a try..
http://forum.xda-developers.com/showpost.php?p=55885793&postcount=312
mjones73 said:
Give this a try..
http://forum.xda-developers.com/showpost.php?p=55885793&postcount=312
Click to expand...
Click to collapse
I mean I made everything by this instructionthat you linked, but have such poroblem and seeking new way for solution
someone.... ((
someone please call 911
help, I need help!
show must go on
I deleted some files (hotspot)
and now it says that `has stopped cause of some problems`
it's same problem about which guy posted on 1st page (3rd post)
I am seeking solution
and i need 10 posts )))
hellooo
anyone
---------- Post added at 04:42 AM ---------- Previous post was at 04:37 AM ----------
if i will do factory reset, that hotspot files will also come back?
))))))
Hello from Spain .
I have a vs980 and His Problem of Hostpost . With HostpostProvisionNewHack.apk I have solved. I can now share Internet Vodafone ES ( Spain )
Thank you !!
not worked..plzz help
this method requir must rooted devices.... any other method for unrooted devices?????
Anyone have 26a original hotspot .apk & .odex available to upload? I accidentally deleted them and keep getting an error when trying to update.
Mobile Hotspot modded to skip provisioning check (VZW)
If you are looking for a hotspot provision with the new 27A update there is a link. works like it should. Im a noob and cannot post links but pm me I have the apk or
droidviews . com / how - to - enable - wifi - tethering - on - verizon - lg - g2 - vs980 /
---------- Post added at 05:48 PM ---------- Previous post was at 05:40 PM ----------
no force close here. I have the 27A update with a different apk it works. need 10 post before i can contribute
---------- Post added at 06:06 PM ---------- Previous post was at 05:48 PM ----------
Have it working on the 27a update
Confirmed - this modded Hotspot APK works on VZW 27A. Thanks a ton - now I can get the hell rid of FoxFi and that annoying notice it gives about the "unknown third party" monitoring.
Success
Worked perfectly.
Thanks
I rooted, but this method isn't for my phone as i see
---------- Post added at 10:51 PM ---------- Previous post was at 10:45 PM ----------
I rooted, but anywayhave a problem, so this method is not for my phone as i see, something is wrong...
apk 27a
Can someone please indicate me where to find the new apk? Thanks
vs980 hoyspot
taxiblues said:
Can someone please indicate me where to find the new apk? Thanks
Click to expand...
Click to collapse
See pm I cannot post links .
Does this work for T-Mobile (obviously on an unlocked vs980).?
destruya1 said:
Confirmed - this modded Hotspot APK works on VZW 27A. Thanks a ton - now I can get the hell rid of FoxFi and that annoying notice it gives about the "unknown third party" monitoring.
Click to expand...
Click to collapse
How did you make it work?
Mine FC's.
Posted from my phone.
jose makalolot said:
How did you make it work?
Mine FC's.
Posted from my phone.
Click to expand...
Click to collapse
I followed the directions from the website given above to the letter. I didn't do anything special. =/
wrlkss' post - you have to manually parse the link.
That being said, I still don't think it's an ideal solution - the hotspot has a fickle habit of dropping connections every so often. Sometimes you can go for quite a while without issue, but sometimes it won't go more than a few minutes before your WiFi wedge goes dark and you have to re-initiate the connection.

Categories

Resources