[Q] wifi shows error after installing nameless rom - HTC Desire C

my apologies if this question has been asked before but since i couldnt find it anywhere so i am posting now:
this is my first time rooting an android device and that too coz recently my htc desire c had become super slow so i unlocked bootloader and downloaded the hasoon2000 tool but after the recovery step i was totally lost on how to flash kernel and all so i switched to superboot and i successfully rooted my phone.
now i wanted to install a rom so i chose nameless rom but the instructions were so confusing and i messed up. i couldn't install it and then my phn wnt start so i went back to hasoon2000 and flashed kernel using the boot.img from the nameless rom and my phn was back up but my wifi is not on anymore. its says error and i saw that my mac address was gone. then i tried again installing the rom and this time i did successfully install it but my wifi is gone
i have two questions:
1. how can i get my wifi back in this rom?
2. can i install any other rom and if i do then will i get my wifi back?

sadiafrin2013 said:
my apologies if this question has been asked before but since i couldnt find it anywhere so i am posting now:
this is my first time rooting an android device and that too coz recently my htc desire c had become super slow so i unlocked bootloader and downloaded the hasoon2000 tool but after the recovery step i was totally lost on how to flash kernel and all so i switched to superboot and i successfully rooted my phone.
now i wanted to install a rom so i chose nameless rom but the instructions were so confusing and i messed up. i couldn't install it and then my phn wnt start so i went back to hasoon2000 and flashed kernel using the boot.img from the nameless rom and my phn was back up but my wifi is not on anymore. its says error and i saw that my mac address was gone. then i tried again installing the rom and this time i did successfully install it but my wifi is gone
i have two questions:
1. how can i get my wifi back in this rom?
2. can i install any other rom and if i do then will i get my wifi back?
Click to expand...
Click to collapse
Click on the second link in my signature.. Look for Prometheus Sense Kernel there. Flash that using fastboot, (or the toolkit) and your wifi should be back.

aashay960 said:
Click on the second link in my signature.. Look for Prometheus Sense Kernel there. Flash that using fastboot, (or the toolkit) and your wifi should be back.
Click to expand...
Click to collapse
thanx so much its working now

Nameless is really outdated. I suggest you switching roms ASAP.

me4488 said:
Nameless is really outdated. I suggest you switching roms ASAP.
Click to expand...
Click to collapse
what rom should i install then?

sadiafrin2013 said:
what rom should i install then?
Click to expand...
Click to collapse
Again, second link in my signature.... Check out those roms, look at screenshots and decide

aashay960 said:
Again, second link in my signature.... Check out those roms, look at screenshots and decide
Click to expand...
Click to collapse
hey u think if i knew what im doing then i would have just done it already
on serious note please suggest me what should i install
here is what i am thinking of doing
either get the revolution sense5 edition
or the jellybean looks tempting but im sot sure if i can install it by myself

sadiafrin2013 said:
hey u think if i knew what im doing then i would have just done it already
on serious note please suggest me what should i install
here is what i am thinking of doing
either get the revolution sense5 edition
or the jellybean looks tempting but im sot sure if i can install it by myself
Click to expand...
Click to collapse
The 'method' to install any ROM is the same and its not difficult. And there is no such thing as a best rom. It's just personal preferences. So if you like HTC Sense, then go for Revolution or Sensational Rom. And if you like a more 'Nexus-like' feel then we've got a lot of JB Roms for you. JB ROMs are believed to be faster than Sense ROMs in general.
So just look at threads of the different ROMs and once you decide to install, download it. I'm running Cyanogenmod 10 right now. I've been using it for a long while now. It was the first JB rom made for this phone and all the other ROMs are made using this as a base..
We even have Samsung-like and Xperia-like Roms. So if you're interested in that, have a look.
And for Sense, Sensational ROM V4 is the most up to date ROM we have. It has a Sense 5 feel to it..
Hope that helps a bit. One more thing - never ask for best rom or best kernel. It's bad manners. But we can understand as you're new..

Related

[Q] BEST ROM with working FLASH PLAYER on cdma hero

Hey guys I'm a noob and sprint decided to give me a hero do to my defective noment I took it over the intercept because of the support here on XDA and I've been lookin around and I like but my question remains what's the best rom for the cdma hero that will still allow the flasplayer to work any ideas or ways to keep makin it work. THANX
Unfortunately, full flash support can not be achieved. There's a light version out there, but I don't know how well it works.
charlie95113 said:
Hey guys I'm a noob and sprint decided to give me a hero do to my defective noment I took it over the intercept because of the support here on XDA and I've been lookin around and I like but my question remains what's the best rom for the cdma hero that will still allow the flasplayer to work any ideas or ways to keep makin it work. THANX
Click to expand...
Click to collapse
I believe Nfinite's Roms have Flash Lite, and then using a browser like Skyfire gives additional flash support as it deals with it server side.
Use Nfinites rom http://forum.xda-developers.com/showthread.php?t=849024 there and then do a search for Zen's Any Kernal with no Perflock. It makes it an extremely snappy Sense Rom. Only Sense has the Flash working, none of the AOSP roms do I believe.
Only downside is Nfinite is on Hiatus due to some personal stuff but he has popped back in and said he isn't gone, just dealing with it and plans to update again soon.
my replyo
ok thanx so fo example even I port the flash light apk (htc flash player) can I at least use that on the aosp rom or the cm 6 or does they need the sense to even aollow it to work ? I just want to be ready to root asap when the hero arrives tomorow
You cannot use those functions in an AOSP rom, has to be with sense.
Ok one last thing before I do this once I get my recovery going and I'm rooted of course I do a data wipe then apply a zip (rom) file correct and if I want to try other roms repeat the proscces. Right just want to make sure. That's how I would do it on my moment
charlie95113 said:
Ok one last thing before I do this once I get my recovery going and I'm rooted of course I do a data wipe then apply a zip (rom) file correct and if I want to try other roms repeat the proscces. Right just want to make sure. That's how I would do it on my moment
Click to expand...
Click to collapse
Yes you would go to recovery, do a factory reset, wipe Dalvik, Cache, etc and then you can flash the new zip for the rom you wish to try.
Most roms will have a sort of guide or instructions, some have things specific to the rom being flashed, so make sure and read the full post, and maybe browse the thread for tidbits that users have had to say about the rom.
Sent from my Dark Horse CM6 Hero using XDA app.

[Q] Registering custom flashed Hero on Sprint Network

I recently upgraded my phone and gave my trusty Hero to an out of town girlfriend. She went to sprint today to have it activated and was unable to get it done. She tells me they attempted to register it on the network but were unable to do so. They say this is because it is rooted and flashed with a custom Rom.
It has the July 08 ASOP rom by jaybob. If anyone can give me any help, I'd be greatly appreciated. I'm wondering if I need to talk her through the process of returning to stock.
Thanks in advance
You need a sense based rom I'm pretty sure.
Sent from my HERO200 using XDA Premium App
If you want her to have a completely stock, unrooted phone, you need to "ruu" it. You will find the ruu file and instructions in the development section.
Other than that, you can flash any sense-based rom (infinite fx's, liquid's), and that will let you activate it also.
If she will be taking it into the sprint store, I recommend ruu, tho.
nandroids are for
sissies
ch1naski said:
If you want her to have a completely stock, unrooted phone, you need to "ruu" it. You will find the ruu file and instructions in the development section.
Other than that, you can flash any sense-based rom (infinite fx's, liquid's), and that will let you activate it also.
If she will be taking it into the sprint store, I recommend ruu, tho.
nandroids are for
sissies
Click to expand...
Click to collapse
I had no idea that you needed a sense based rom. I'll talk her through flashing it. Quick related question. I am using clockwork recovery. I am under the impression I may not be able to properly flash a sense based rom with this. Or am I absolutely wrong.
Thanks,
You guys are saviors.
they need epst in the dialer and diag witch is only in stock sense roms.
yournamehere484 said:
I had no idea that you needed a sense based rom. I'll talk her through flashing it. Quick related question. I am using clockwork recovery. I am under the impression I may not be able to properly flash a sense based rom with this. Or am I absolutely wrong.
Thanks,
You guys are saviors.
Click to expand...
Click to collapse
You can flash a sense rom with cwm. I flash my nandroid backup of stock sense with it all the time.
nandroids are for
sissies
yournamehere484 said:
I had no idea that you needed a sense based rom. I'll talk her through flashing it. Quick related question. I am using clockwork recovery. I am under the impression I may not be able to properly flash a sense based rom with this. Or am I absolutely wrong.
Thanks,
You guys are saviors.
Click to expand...
Click to collapse
I may be Wrong but you should be able to Activate it over the phone... I think Sprints number is 1-800-639-6111! Also if I were you I'd probably do what the others Advised and Flash a Sense based Rom, Try LiquidSense, or the Fresh Roms are Also pretty Good!
Good Luck!
PMGRANDS said:
I may be Wrong but you should be able to Activate it over the phone... I think Sprints number is 1-800-639-6111! Also if I were you I'd probably do what the others Advised and Flash a Sense based Rom, Try LiquidSense, or the Fresh Roms are Also pretty Good!
Good Luck!
Click to expand...
Click to collapse
You MUST have a sense rom to activate over the phone.
nandroids are for
sissies
ch1naski said:
You MUST have a sense rom to activate over the phone.
nandroids are for
sissies
Click to expand...
Click to collapse
Yes, and it will work. I've done it myself.
-----
Android: It will make you a sexual tyrannosaurus, just like me.
user7618 said:
Yes, and it will work. I've done it myself.
-----
Android: It will make you a sexual tyrannosaurus, just like me.
Click to expand...
Click to collapse
I figured it would, but wasn't Positive! Thanx for Confirming!

[Q] installing ROM

Hello,
I want to install a new rom to my phone, but since I'm new I'm pretty confused about everything. First of all, I don't know which ROM to install, I know there are so many, so I picked this one: http://forum.xda-developers.com/showthread.php?t=2060374
Next, I go to that site do download it, and I can't find my phone, only i9100. Is this also good or what? Do I need to install kernel also? I found this tutorial, should I follow it? http://forum.xda-developers.com/showpost.php?p=7152078&postcount=5
I rooted my phone and used a nandrian backup for my files, so I just need to install a ROM and/or kernel but It's pretty hard since there is no ultra-beginner guide
Hi!
Which ROM you should install or not is a question for yourself...
My first ROM i`ve installed was Cyanogenmod 9 ...because it is the best known and installed rom and everywhere i read about it ...
So i made only good experience with this mod ...but another person would tell you ,that he user/installed slim bean and that`s the best for him ...
I think you should try some ROMS and find out what is the best for you, which is the best to handle for you ...
In CM (Cyanogenmod) there is an stock kernel included ...but you can install another kernel like semaphore etc...
Hmhh that`s curious that you don`t find your device ...because in your link there is a pic of a SGS1 ...so i think you should get Slim Bean also for SGS1...
No the verson of slim bean for i9100 won?t work on i9000 because of the other hardware ....
Hope i could help you a little bit!
paletar said:
Hello,
I want to install a new rom to my phone, but since I'm new I'm pretty confused about everything. First of all, I don't know which ROM to install, I know there are so many, so I picked this one: http://forum.xda-developers.com/showthread.php?t=2060374
Next, I go to that site do download it, and I can't find my phone, only i9100. Is this also good or what? Do I need to install kernel also? I found this tutorial, should I follow it? http://forum.xda-developers.com/showpost.php?p=7152078&postcount=5
I rooted my phone and used a nandrian backup for my files, so I just need to install a ROM and/or kernel but It's pretty hard since there is no ultra-beginner guide
Click to expand...
Click to collapse
paletar said:
Hello,
I want to install a new rom to my phone, but since I'm new I'm pretty confused about everything. First of all, I don't know which ROM to install, I know there are so many, so I picked this one: http://forum.xda-developers.com/showthread.php?t=2060374
Next, I go to that site do download it, and I can't find my phone, only i9100. Is this also good or what? Do I need to install kernel also? I found this tutorial, should I follow it? http://forum.xda-developers.com/showpost.php?p=7152078&postcount=5
I rooted my phone and used a nandrian backup for my files, so I just need to install a ROM and/or kernel but It's pretty hard since there is no ultra-beginner guide
Click to expand...
Click to collapse
here da link for slim, next time, search for device name galaxysmtd for i9000
http://slimroms.net/index.php/downloads/all/viewcategory/402-galaxysmtd
juz follow da tutorial, but make sure ur on 2.3.6 latest build with cf root or custom rom install, if ur from below ver (2.3.4/2.3.3/2.3.5) make sure ur flash cyanogenmod 9 first, then flash cm10
or u can see da tutorial here, but dont forget to push da thanks button if da OP helped u
http://forum.xda-developers.com/showthread.php?p=35683353
Sent from my GT-I9000 using xda premium

[Q] [Newbie] Stock Android on Incredible S?

Hi all,
This is my first post here... So a loud NEWBIE alert...
Can someone pls help me with all my doubts?
1. Can I install STOCK Kitkat on IncS? Or any other Android version, but stock? I need that for debugging and got this used IncS for free... Just not sure if I can install stock ROM on HTC IncS.
2. If Yes, can someone direct me there?
3. If Not, what alternatives do I have? I need a daily use, stable ROM. (Thats also why looking for Stock Android)..
Thanks already..
IncredibleSAbhay said:
Hi all,
This is my first post here... So a loud NEWBIE alert...
Can someone pls help me with all my doubts?
1. Can I install STOCK Kitkat on IncS? Or any other Android version, but stock? I need that for debugging and got this used IncS for free... Just not sure if I can install stock ROM on HTC IncS.
2. If Yes, can someone direct me there?
3. If Not, what alternatives do I have? I need a daily use, stable ROM. (Thats also why looking for Stock Android)..
Thanks already..
Click to expand...
Click to collapse
Because this phone is so old/unsupported hardware, there is no real stable 4.4 rom, just szeszo's built, which has a LOT of bugs.
For a stable rom, you can try CM10, 10.1, 10.2. iirc there are no major bugs.
Sent from my Nexus 5
szeszo's CyanVivo is definitely pretty stable (the version based on android 4.1.x). If you wait a bit though, I'm sure all the Vivokat bugs (minus video recording) will eventually be sorted out...I'm actually using that as my daily go-to phone, it works well enough.
Thanks for reply
Thanks guys for replies.
Sorry, got too busy in work.
I could wait on VivoKat. Just checked, szezso is optimistic about fixing the (only) 2 bugs in that build..
I have installed HTC official ICS OTA for the time being. Enlighten me if anyone knows more about any other stock 4.2+ ROM.
Also let me know views on this: NikRoms (Can't post links being a new)
Had considered this when installing the above...
IncredibleSAbhay said:
Thanks guys for replies.
Sorry, got too busy in work.
I could wait on VivoKat. Just checked, szezso is optimistic about fixing the (only) 2 bugs in that build..
I have installed HTC official ICS OTA for the time being. Enlighten me if anyone knows more about any other stock 4.2+ ROM.
Also let me know views on this: NikRoms (Can't post links being a new)
Had considered this when installing the above...
Click to expand...
Click to collapse
I used Project X Rebirth for several months and it works great for me. Change the boot animation to one of the ones in the Theme folder here as the stock one hangs up a bit.
I reverted to Rebirth yesterday from VivoKat because I grew tired of charging my phone everyday.
Clear the Air please...
Going to install it since VivoKat seems pretty stable now.. :fingers-crossed:
I unlocked the bootloader on my Inc S from HTCDev.com. The process was easier than I had thought.
Now the doubts are --
Do I still need S-OFF to install VivoKat? I was reading this FAQ, which is quite nicely put, but still a little confused whether to S-OFF or not. I would prefer not to unless it is absolutely needed.
Second is, what if I want to revert to the official ICS RUU? Can I do that with unlocked bootloader and how? If S-OFF has to be done for above, how to and is it possible to revert to ICS RUU in that case?
Appreciate your time guys. Thanks already.
IncredibleSAbhay said:
Going to install it since VivoKat seems pretty stable now.. :fingers-crossed:
I unlocked the bootloader on my Inc S from HTCDev.com. The process was easier than I had thought.
Now the doubts are --
Do I still need S-OFF to install VivoKat? I was reading this FAQ, which is quite nicely put, but still a little confused whether to S-OFF or not. I would prefer not to unless it is absolutely needed.
Second is, what if I want to revert to the official ICS RUU? Can I do that with unlocked bootloader and how? If S-OFF has to be done for above, how to and is it possible to revert to ICS RUU in that case?
Appreciate your time guys. Thanks already.
Click to expand...
Click to collapse
For many ROM's S-Off is not necessary, but it definitely make life easier.
This is a straight forward guide
DuffyBank said:
For many ROM's S-Off is not necessary, but it definitely make life easier.
This is a straight forward guide
Click to expand...
Click to collapse
Well I did do vivokat, it was smooth transition. Although I happened to do a mistake (I suppose. Posted in vivokat QA thread.)
flashed boot before recovery.
Does anyone have any links to downloading official ICS ROM with Sense 3.6?
@DuffyBank : you reverted to Rebirth because of battery drains in vivokat. Apart from that, can u pls compare the two? which one u find better?
IncredibleSAbhay said:
Well I did do vivokat, it was smooth transition. Although I happened to do a mistake (I suppose. Posted in vivokat QA thread.)
flashed boot before recovery.
Does anyone have any links to downloading official ICS ROM with Sense 3.6?
@DuffyBank : you reverted to Rebirth because of battery drains in vivokat. Apart from that, can u pls compare the two? which one u find better?
Click to expand...
Click to collapse
Both are smooth, VivoKat is much faster and frees more memory (Sense I imagine?). I like the Sense interface and the camera is better in Rebirth than VivoKat.

[Q] Double Tap on screen to wake up?

Guys I am actually stock at the moment but doubletap to wake up screen is the feature
which I really want on my M7, I read some where long time ago that it was not possible on
M7 since it was a hardware feature but recently I came across a kernel for M7 with this feature. see below
http://forum.xda-developers.com/sprint-htc-one/development/kernel-elite-kernels-t2961835
The above kernel needs a GPE L Rom.
I am thinking of rooting and installing a custom rom now, I wanted to ask what rom should I
download in order to get this feature since I am new so I have no idea what a GPE L rom is.
Thanks in advance and sorry if its a noob question!!
This is a gpe l rom
http://forum.xda-developers.com/showthread.php?t=2965049
[ROM] ★☆★Nocturnal GE CDMA-Lollipop|5.0.1|12/27/14|★☆★
It is vanilla android meaning it does not contain any sense elements. This has been built into to many roms and kernels over the past 18 months if you prefer sense my stock sense rom has this built in
http://forum.xda-developers.com/showthread.php?t=2848102
[rom] sense 6 4.4.3 Stock (6.09.401.10)(11/19/14)
Sent from my HTC One using Tapatalk
Just making sure!!
Thanks a lot, So if I am not mistaken the second Rom you mentioned has this feature built in but
if I need this feature on Nocturnal Rom I will need to flash the elite kernel?
thicklizard said:
This is a gpe l rom
http://forum.xda-developers.com/showthread.php?t=2965049
[ROM] ★☆★Nocturnal GE CDMA-Lollipop|5.0.1|12/27/14|★☆★
It is vanilla android meaning it does not contain any sense elements. This has been built into to many roms and kernels over the past 18 months if you prefer sense my stock sense rom has this built in
http://forum.xda-developers.com/showthread.php?t=2848102
[rom] sense 6 4.4.3 Stock (6.09.401.10)(11/19/14)
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
waqasr said:
Thanks a lot, So if I am not mistaken the second Rom you mentioned has this feature built in but
if I need this feature on Nocturnal Rom I will need to flash the elite kernel?
Click to expand...
Click to collapse
Correct
Sent from my HTC One using Tapatalk
waqasr said:
Guys I am actually stock at the moment but doubletap to wake up screen is the feature
which I really want on my M7, I read some where long time ago that it was not possible on
M7 since it was a hardware feature but recently I came across a kernel for M7 with this feature. see below
http://forum.xda-developers.com/sprint-htc-one/development/kernel-elite-kernels-t2961835
The above kernel needs a GPE L Rom.
I am thinking of rooting and installing a custom rom now, I wanted to ask what rom should I
download in order to get this feature since I am new so I have no idea what a GPE L rom is.
Thanks in advance and sorry if its a noob question!!
Click to expand...
Click to collapse
thicklizard said:
This is a gpe l rom
http://forum.xda-developers.com/showthread.php?t=2965049
[ROM] ★☆★Nocturnal GE CDMA-Lollipop|5.0.1|12/27/14|★☆★
It is vanilla android meaning it does not contain any sense elements. This has been built into to many roms and kernels over the past 18 months if you prefer sense my stock sense rom has this built in
http://forum.xda-developers.com/showthread.php?t=2848102
[rom] sense 6 4.4.3 Stock (6.09.401.10)(11/19/14)
Click to expand...
Click to collapse
As thick said, most custom kernels do come with double tap to wake, aka dt2w.
I'm assuming you know the procedure for rooting and flashing a ROM.
In order to get dt2w, first flash a ROM of choice. Boot up, and set it up according to your liking. Then, find a compatible kernel (we can help you with that), and flash that. Boot up again, make sure (in your phone's settings) that the kernel flashed successfully, then download a kernel tuning app like TricksterMOD and go into "Screen Wake Settings."
Note: some kernels may use AROMA, which lets you configure dt2w while flashing. The above should still apply if you want to change your settings later on.
Thick's ROM comes with it built in, but most other ROMs don't.
Happy flashing, and remember, ask twice, flash once.
I appreciate it!!
I rooted and played around with different Roms on my previous phones e.g. HTC Hero, NS4g, and Evo4G
but since my HTC one is still being updated via OTA officially I didn't proceed with rooting yet.
I really wanted DT2w feature and I don't think any update would give me that feature so that's why
I am thinking about rooting my phone. I really appreciate your help since you said you can help with
choosing a kernel please go ahead and suggest a good kernel and few feature rich/stable Roms.
sauprankul said:
As thick said, most custom kernels do come with double tap to wake, aka dt2w.
I'm assuming you know the procedure for rooting and flashing a ROM.
In order to get dt2w, first flash a ROM of choice. Boot up, and set it up according to your liking. Then, find a compatible kernel (we can help you with that), and flash that. Boot up again, make sure (in your phone's settings) that the kernel flashed successfully, then download a kernel tuning app like TricksterMOD and go into "Screen Wake Settings."
Note: some kernels may use AROMA, which lets you configure dt2w while flashing. The above should still apply if you want to change your settings later on.
Thick's ROM comes with it built in, but most other ROMs don't.
Happy flashing, and remember, ask twice, flash once.
Click to expand...
Click to collapse
waqasr said:
I rooted and played around with different Roms on my previous phones e.g. HTC Hero, NS4g, and Evo4G
but since my HTC one is still being updated via OTA officially I didn't proceed with rooting yet.
I really wanted DT2w feature and I don't think any update would give me that feature so that's why
I am thinking about rooting my phone. I really appreciate your help since you said you can help with
choosing a kernel please go ahead and suggest a good kernel and few feature rich/stable Roms.
Click to expand...
Click to collapse
I would suggest SD 12 since it's on the latest base (.12, which has some important bug fixes) and it's relatively close to stock.
Along with that, I would suggest using ElementalX 18, which is one of the more easy Kernels to set up. It uses AROMA, so you don't have to download any apps to adjust your settings later. I had a good experience with the battery saving/thermal throttling/undervolting settings (you'll see those come up when you try to flash it). I don't recommend messing with the clock settings, however.
Wipe (default wipe in TWRP), flash ROM, boot, set up, go into recovery, flash kernel, reboot, wait, reboot again. That's the procedure I follow.
I appreciate it!!
sauprankul said:
I would suggest SD 12 since it's on the latest base (.12, which has some important bug fixes) and it's relatively close to stock.
Along with that, I would suggest using ElementalX 18, which is one of the more easy Kernels to set up. It uses AROMA, so you don't have to download any apps to adjust your settings later. I had a good experience with the battery saving/thermal throttling/undervolting settings (you'll see those come up when you try to flash it). I don't recommend messing with the clock settings, however.
Wipe (default wipe in TWRP), flash ROM, boot, set up, go into recovery, flash kernel, reboot, wait, reboot again. That's the procedure I follow.
Click to expand...
Click to collapse
Thank you, I really appreciate your help and recommendation.
sauprankul said:
I would suggest SD 12 since it's on the latest base (.12, which has some important bug fixes) and it's relatively close to stock.
Along with that, I would suggest using ElementalX 18, which is one of the more easy Kernels to set up. It uses AROMA, so you don't have to download any apps to adjust your settings later. I had a good experience with the battery saving/thermal throttling/undervolting settings (you'll see those come up when you try to flash it). I don't recommend messing with the clock settings, however.
Wipe (default wipe in TWRP), flash ROM, boot, set up, go into recovery, flash kernel, reboot, wait, reboot again. That's the procedure I follow.
Click to expand...
Click to collapse
I have finally rooted my phone and I am in process of trying different roms at the moment, I tried to flash the ElementX18 kernel on my stock rooted rom but the installation failed so Now I am going to install SD12 which you mentioned and then flash the ElementX18 kernel. Since you mentioned you had a good experience with thermal throttling/undervolting can you please give me safe or your values so I can give them a shot as well. Thank you
waqasr said:
I have finally rooted my phone and I am in process of trying different roms at the moment, I tried to flash the ElementX18 kernel on my stock rooted rom but the installation failed so Now I am going to install SD12 which you mentioned and then flash the ElementX18 kernel. Since you mentioned you had a good experience with thermal throttling/undervolting can you please give me safe or your values so I can give them a shot as well. Thank you
Click to expand...
Click to collapse
EX 18 is a 4.4.3 kernel, you probably used it on a 4.4.2 ROM. A 25 mV undervolt with "run cool" setting would be good.
sauprankul said:
EX 18 is a 4.4.3 kernel, you probably used it on a 4.4.2 ROM. A 25 mV undervolt with "run cool" setting would be good.
Click to expand...
Click to collapse
Yes you are right I was trying it first on my stock rom which was 4.4.2 if I am not mistaken that was the last official OTA
update for me. I am on SD 12 ROM and EX18 Kernel at the moment and loving it. I tried SlimKat which was not bad but for some reason I couldn't fix the resolution of the screen everything was too small for me (icons,fonts etc). Latest Liquid Smooth didnt recognize my sim card so I had to move away from it. It seems like for now SD12 is going to be my daily driver.
In case if I want to give SlimKat another shot can I use EX18 on it or it's only a sense kernel? also SlimKat is 4.4.4 so what good kernel can you suggest which will give me DT2W option?
waqasr said:
Yes you are right I was trying it first on my stock rom which was 4.4.2 if I am not mistaken that was the last official OTA
update for me. I am on SD 12 ROM and EX18 Kernel at the moment and loving it. I tried SlimKat which was not bad but for some reason I couldn't fix the resolution of the screen everything was too small for me (icons,fonts etc). Latest Liquid Smooth didnt recognize my sim card so I had to move away from it. It seems like for now SD12 is going to be my daily driver.
In case if I want to give SlimKat another shot can I use EX18 on it or it's only a sense kernel? also SlimKat is 4.4.4 so what good kernel can you suggest which will give me DT2W option?
Click to expand...
Click to collapse
EX18 is sense only.
And sorry, I don't really know about nonsense stuff.
sauprankul said:
EX18 is sense only.
And sorry, I don't really know about nonsense stuff.
Click to expand...
Click to collapse
No problem bro, I appreciate it.

Categories

Resources