No WiFi in WebOS - TouchPad Q&A, Help & Troubleshooting

So I picked up a couple of used 32GB Touchpads Both were stuck at the setup screen waiting for WiFi to find a network. They would just continually scan.
So I bypassed the setup, neither WiFi or Bluetooth will turn on. I tried a few fixes I found on the internet with no luck. Enable then Disable Airplane mode, Leave it running trying to turn on BT and WiFi overnight on a charger. I rolled it back to 3.0.0 then back up to 3.0.5 one by one with the same results.
I decided to go ahead and try CWM and see what happens. WiFi and Bluetooth work perfectly in CM9 and CM10??!!?? Not a single issue. So I went back to WebOS and since I don't have WiFi I used WOSQI to install Uberkernel and Govnah, thinking maybe a new kernel would fix it. The same results as before.
For the life of me I am stuck. Sure Android works perfect but I would still like to figure out where the problem is.
Anybody have any ideas?

even me im having problem with my wifi

lakay77 said:
even me im having problem with my wifi
Click to expand...
Click to collapse
So far I have tried editing the tokens, replacing them with working tokens from other TP, deleting the tokens and restarting, forcing a new mac through novacom. The closest I have come is a mac showing for etho in ifconfig but no wirelss at all in iwconfig and the token still shows all 0s for the mac.

Related

[Q] CM7 Wifi issues

I'm running Cm7 nightly 19 and my wifi is acting funny. Its stays connected but after a while I don't get internet and the only way to solve it is to turn it wifi off and on again.
Did anyone face this? How do you work around it?
Have you tried turning the WIFI sleep policy to never sleep?
WIFI Settings>Advanced>WIFI Sleep Policy>Never
Ya but it didn't help!
i was having issues but builds 17+ have been much much better.
no fix that i'm aware of. you could try switching your security settings on the router.
I have seen this and have determined that it could be related to router type and or brand.
See this post.
http://forum.cyanogenmod.com/topic/16323-cm7-discussion-of-nightlies/page__view__findpost__p__157374
I was having connection issues with 802.1x at one point - it would show it was connecting then just drop. I fixed it by replacing the wifi folder in /etc/.
Steps:
download the the wifi folder from dl.dropbox.com/u/3220557/wifi.zip
Unzip and Place it on your SD card.
Using Root Explorer, navigate to /etc/, select "mount R/W' and rename the current 'wifi' file 'wifiOLD or whatever you like.
Next, copy the new 'wifi' folder off your sd card and paste in /etc/.
Reboot the nook.
Hope this helps.
mndev12 said:
I was having connection issues with 802.1x at one point - it would show it was connecting then just drop. I fixed it by replacing the wifi folder in /etc/.
Steps:
download the the wifi folder from dl.dropbox.com/u/3220557/wifi.zip
Unzip and Place it on your SD card.
Using Root Explorer, navigate to /etc/, select "mount R/W' and rename the current 'wifi' file 'wifiOLD or whatever you like.
Next, copy the new 'wifi' folder off your sd card and paste in /etc/.
Reboot the nook.
Hope this helps.
Click to expand...
Click to collapse
what exactly are you replacing with that new wifi folder? did this help others?
I've had problems with a friends nook and my router (mine, same CM7 build, works fine). I'd recommend trying what mndev12 said first, and if that doesn't work try turning off all encryption/security on your router and see if it still happens. From what I can gather here on the forums is that some people are having problems with different security configs.
This might help.
I had the same issue with my NC using a D-Link DIR-615 wireless router. I solved this issue by turning Wireless N off. I set mine to BG only. Works flawlessly. Hope this helps.
Another suggestion to folks with Wifi and router issues. Make sure your router has current/updated firmware running on it. I know we all get in the habbit of setting them up and just leaving them but the mfgs do in fact push out firmware updates from time to time that can and do make a world of difference in cases like these, specially on older routers
basrawi said:
I'm running Cm7 nightly 19 and my wifi is acting funny. Its stays connected but after a while I don't get internet and the only way to solve it is to turn it wifi off and on again.
Did anyone face this? How do you work around it?
Click to expand...
Click to collapse
Did you get this issue resolved? If so, I am curious as to how... having similar issues myself. Have played with security settings on router and have tried disabling 'n'... but still seemed to have the connection issues... going to borrow and try a different router altogether tonight or tomorrow.
Good suggestion will2live. I haven't updated mine since I set it up. However I think it is a driver issue with the TI chip we have, not a router issue.
Sent from my PC36100 using XDA App
so are youll trying to say that this isnt the issue of cm7?i dont think so...i never had such problems with the stock rom..
Im seeing the same thing - running the encore version and my wifi is all open - drops a bit or takes a while to connect? anyone else?
I loaded the most recent version of CM7 and am having issues with the Nook not finding any WiFi. It worked fine for about 12 hours, but now won't find any access points. I have tried turning off WiFi and back on several times as well as rebooting.
Any ideas on how to get the WiFi to see access points?
Try a clean install? My wifi works pretty well ( I sometimes have to turn off and let it shill for 30 sec) on Phiremod 6.1 (cm7.0.2)
Ryjon90 said:
Did you get this issue resolved? If so, I am curious as to how... having similar issues myself. Have played with security settings on router and have tried disabling 'n'... but still seemed to have the connection issues... going to borrow and try a different router altogether tonight or tomorrow.
Click to expand...
Click to collapse
I have had serious wifi headaches myself (with both 7.0.0 and 7.0.2). I have tried each about a dozen times, wiping, different versions of CWM recovery, tried nightlies and always the same. Wifi will connect, I'll start downloading something, and then it will disconnect at some point (may be a minute, may be 3 or 4). Turning wifi on and off brings it back to life but only momentarily. Have no issues with Nookie Froyo or stock. I did try connecting to WEP (other than my usual WPA2) but could only do this by tethering to my phone. It seemed to have fewer disconnects but I did still have issues there. Plus, resorting to tethering or a less secure network is also obviously not really a solution. Really hoping a pattern can be discovered to diagnose this issue because its becoming a deal breaker for me. This issue aside, LOVE the ROM.

CM7 RC4 Wifi crashing

Ok so on the RC4 CM7 build my wifi is very unstable, whenever I attempt to download files it will randomly crash resulting in any files being downloaded without a restart bookmark being lost as I have to leave the program I'm in turn off Wifi turn it back on and then finallly i'm able to reconnect to the internet. Is anyone else having this problem? If you did, do you know how to fix it? I'm at my wits end here as there are programs I've had to try to download for over 2 hours because of these wifi crashes....
Thanks,
Adan
Adanedhels said:
Ok so on the RC4 CM7 build my wifi is very unstable, whenever I attempt to download files it will randomly crash resulting in any files being downloaded without a restart bookmark being lost as I have to leave the program I'm in turn off Wifi turn it back on and then finallly i'm able to reconnect to the internet. Is anyone else having this problem? If you did, do you know how to fix it? I'm at my wits end here as there are programs I've had to try to download for over 2 hours because of these wifi crashes....
Thanks,
Adan
Click to expand...
Click to collapse
I've had the exact same issue, and I'm not 100% sure yet, but mine completely went away when I uninstalled Setting Profiles Lite. I was using it to turn off Wifi every time it went into suspend mode (same settings I used on Eclair) but since I did that, wifi hasn't burped once. Like you I could barely download anything before it would stop and I had to turn off and back on wifi to make it work again for a while.
this seems to happen to me every morning between 5 and 7am.. most other times it works great.. i cant figure it out either
not using that program.....
Well I checked just to make sure and I am not using the program you mentioned so I am at a loss as to why the wifi will crap out randomly and have to be turned off then on... Any other ideas?
Thanks,
Adan
I'm having the same issue. No idea what's going on, but it's driving me crazy.
I don't seem to have the same trouble just surfing the web, but if I try to download anything or stream video, it craps out about every 5 minutes.
Sent from my NookColor using Tapatalk
Yeah, mine is still crapping out tonight too.. stock wifi works perfect. I am using CM7 on SD, anyone else?
yep yep yep
Exactly the same setup man. Using my CM7 on my SD card and WIFI runs just fine on my reg Nook software, Nookie Froyo, and HC sds i have run....
Adanedhels said:
Ok so on the RC4 CM7 build my wifi is very unstable, whenever I attempt to download files it will randomly crash resulting in any files being downloaded without a restart bookmark being lost as I have to leave the program I'm in turn off Wifi turn it back on and then finallly i'm able to reconnect to the internet. Is anyone else having this problem? If you did, do you know how to fix it? I'm at my wits end here as there are programs I've had to try to download for over 2 hours because of these wifi crashes....
Thanks,
Adan
Click to expand...
Click to collapse
This may be silly, but are you all setting your wifi to 'never sleep's on advanced settings under wifi settings? If you are not familiar with Cm roms, I can see how you might miss this essential setting. Just press the menu key after going into wifi settings, and a secondary menu will come up..with scan, and advanced...under advanced, set wifi sleep policy to never. Hope this helps, but if it's something you all already know, then please disregard.
Delivered by a little dude that lives behind your screen.
mazook98 said:
This may be silly, but are you all setting your wifi to 'never sleep's on advanced settings under wifi settings? If you are not familiar with Cm roms, I can see how you might miss this essential setting. Just press the menu key after going into wifi settings, and a secondary menu will come up..with scan, and advanced...under advanced, set wifi sleep policy to never. Hope this helps, but if it's something you all already know, then please disregard.
Delivered by a little dude that lives behind your screen.
Click to expand...
Click to collapse
yeah, thats one of the first things i do when installing a rom and the problem persists past that
Adanedhels said:
Ok so on the RC4 CM7 build my wifi is very unstable, whenever I attempt to download files it will randomly crash resulting in any files being downloaded without a restart bookmark being lost as I have to leave the program I'm in turn off Wifi turn it back on and then finallly i'm able to reconnect to the internet. Is anyone else having this problem? If you did, do you know how to fix it? I'm at my wits end here as there are programs I've had to try to download for over 2 hours because of these wifi crashes....
Thanks,
Adan
Click to expand...
Click to collapse
i have a mytouch slide and i have try everything and i have same issues with the wifi. a lot of you say to put the wifi on never sleep, but it dosent help. wifi issues still out there on rc4. please help.
ahernandez646 said:
i have a mytouch slide and i have try everything and i have same issues with the wifi. a lot of you say to put the wifi on never sleep, but it dosent help. wifi issues still out there on rc4. please help.
Click to expand...
Click to collapse
So this isn't specific to the Nook Color, it's a CM7 bug overall that Wifi falls out?
What's interesting is my wifi will stay connected, idle, for 8+ hours (while I slept) but I then download 2M of files while eating breakfast and it dies and I have to restart wifi to make it work again...
This is definitely going to make me wait until it's fixed to put CM7 on emmc, this is really aggravating. Which I hate, because I'm really digging CM7. It's perkier, runs smoother, and no B&N shortcut thingy popping up by accident all of the time.
So anyone NOT on SD seeing this problem on the Nook Color? Sounds like this might be a generic CM7 issue but I've also been told that heavy IO on the SD could cause IO problems in other areas, including wifi.
I'm not on SD and having the same problems.
http://code.google.com/p/cyanogenmod/issues/detail?id=3314
Can you guys go there and Star that issue and add your configuration and experience?
And please, if anyone figures out anything, be a hero and tell us I'm thinking about wiping fresh and not installing any apps and seeing if the behavior continues.
Popped out my CM7 SD card and booted to Eclair and just spent 45 minutes updating my apps I hadn't done in 4 days, read Engadget, read some news in Pulse, played a youtube video, downloaded some other data.
Not one hiccup.
CM7 is sooooo nice, hopefully this gets figured out. What's bad is that a lot of people say they don't have the problem, so something is going on.
BUMP
BUMP
Don't want this forgotten until it is fixed
I have been dealing with thisfora while and I seem to have come across a work around. I switched the security settings of my router and made it a compley open network. Since then, I've had zero issues. My wireless network is unsecure now, but I live out in the woods, so I'm not too concerned.
Sent from my NookColor using Tapatalk
Several people have reported this, specifically with the Nook Color. I personally haven't had wifi crashes or refusal to wake up, but I have noticed that websites take significantly longer to load on my Nook Color than they do on either my wifes or my Droid X. Obviously there are a ton of factors that could be responsible for this though.
Okay, so I tried everything I could think of.. Imaged back to totally clean CM7 RC4, not even gapps.. Fiddled with all sorts of CM Perf settings (vm heap, JIT, etc)
Considering I've also had the wifi dropouts on my phone, work, and home router I was convinced it could not be anything router specific, but I have an old Linksys B router that I keep up for my daughters computer which I have an ancient Prism wireless card in so I didn't have to run cables to her room.
It works. I used it about hour last night, off and on for a few hours today. No wifi hangs.
So my next step is to figure out if it's the router or the encryption... My B router has no encryption on it, just MAC filtering to keep out the neighbors. The G router running DD-WRT has WPA Encryption. So I'm going to disable Encryption on the G router and turn on MAC filtering and see what happens. If it works there, it must be related to encryption. If it still fails, it must be something related to the router or router FW.
Okay, first thing I did was change from TKIP+AES to only TKIP on my G router and so far so good. I found some other evidence that AES might be an issue:
http://forum.xda-developers.com/showpost.php?p=11598765&postcount=187
Anyone else, please try TKIP only if your router has AES available?
nopers
Sorry man I don't have AES as a option, so I'm not sure that is the problem...

[Q] Wifi Help!!

Wifi works fine at home with no drop at all. However, in office it just does not connect - it goes in a loop : scanning-connecting-authenticating-disconncted-scanning. Does not matter whether the password is right or wrong. My office uses WPA/WPA 2 PSK.
It was connecting before then suddenly it stopped working. It still connects via WebOS. I have tried partition wipe, android factory reset, xron mod etc. but still no luck. I thought it will be fixed after factory reset or partition wipe but no. Can anyone please help me? P.S. I will not be able to get the router reset in office.
This could be a lot of things. Could you set your phone up as a wifi hotspot or bluetooth tether or something?
i had that in my office....i just made it forget the network and enter the password again, seemed to do the trick
I had the same issue. There is a youtube video that will show you how to fix it and I haven't had the problem since. I can't post links because I'm a new user, but search "Fix Wifi Issues on Your Touchpad Running Android" on youtube.
Visited my friend today at his townhouse where is countless wireless networks.
His TP refuses to connect and my TP that is working without problems at my house refused to connect as well.
We changed the AP settings to CH6 on 2.4GHz - no change and it would not connect to 5GHz AP neither.
Got back home and it connected no problem.
Thanks all. I tried entering the password again and it connected!
whenever my TP does this I just tick "Airplane Mode" then enable the Wifi again.
at the same time i installed xron 1/3/2012 , i found this "fxr wififix"
it is free from market
it works great for me..
Thanks
amkaos said:
at the same time i installed xron 1/3/2012 , i found this "fxr wififix"
it is free from market
it works great for me..
Click to expand...
Click to collapse
This has worked for me in both MIUI and XRON for 3 touchpads

[Q] WiFi Tether Won't Work (even with correct settings)?

I'm running OMJ's ROM and using WiFi Tether TrevE Mod "Version 3.2-beta-modv5-***Synergized***"
Okay so even with the settings that everyone recommends for the HTCone, and a few modifications, I still cannot get the blasted thing to work.
Settings I've tried:
Profile: Generic ICS/JB(wlan0)
Setup-Method: Auto
Encryption ON (p/w is the correct format AFAIK, about 12 lowercase letters no numbers, similar to the default)
Changed SSID to "HTCone" no spaces
Wifi Driver Reload (1) checked
MSS Clamping checked
Routing Fix checked
With those settings, I can't even get it to broadcast. It says it's running but no devices can find it. It simply isn't there.
If I disable Wifi Driver Reload (1) it begins broadcasting. However, when I attempt to connect, the second device just sits there at "Obtaining IP Address..." for about 90 seconds then retries and gets stuck at "Authenticating" then back. An endless loop never resulting in a connection.
The most frustrating thing about this is that it was JUST working the day before. I didn't touch ANYTHING and it just decided to take a dump.
Addendum: I was looking at the notes in the bottom of the ABOUT screen and I noticed the updates are quite old. Is it possible I have an old version that doesn't work with the HTC One? I got it from QBKING77's website.
Happened to me and don't have an answer. I wiped and didn't restore anything to resolve it. Restoring data broke it again.
Sent from my HTCONE using xda app-developers app
I followed this guide that worked for my Note II and I have no problems. I'm typing this message from my laptop tethered to my ONE. I have WiFi-driver reload 2 checked.
gk1984 said:
Happened to me and don't have an answer. I wiped and didn't restore anything to resolve it. Restoring data broke it again.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
klbjr said:
I followed this guide that worked for my Note II and I have no problems. I'm typing this message from my laptop tethered to my ONE. I have WiFi-driver reload 2 checked.
Click to expand...
Click to collapse
I had no luck wiping the phone and re-installing the ROM. It was still FUBAR after the fresh flash of OMJ. What drives me NUTS about that is the fact that it was JUST working not 12hrs before it stopped working.
To give some more information as to the issue, it appears that checking either one (or both) of the Force Driver options causes it to not broadcast at all. If either of those two are checked, the hotspot isn't even visible to any device. If left unchecked, the hotspot becomes visible. However, upon trying to connect to the hotspot, it gets stuck in a loop of "Authenticating..." then "Obtaining IP address" which never results in a connection.
I've tried the options listed in that guide you posted, but to no avail.
So, at this point, I'm wondering if it's just because I'm using an outdated WiFi hotspot app. If anyone has one that's been updated since a little under a year ago, I'd appreciate a link. Thanks!
wolfbuck22 said:
I had no luck wiping the phone and re-installing the ROM. It was still FUBAR after the fresh flash of OMJ. What drives me NUTS about that is the fact that it was JUST working not 12hrs before it stopped working.
To give some more information as to the issue, it appears that checking either one (or both) of the Force Driver options causes it to not broadcast at all. If either of those two are checked, the hotspot isn't even visible to any device. If left unchecked, the hotspot becomes visible. However, upon trying to connect to the hotspot, it gets stuck in a loop of "Authenticating..." then "Obtaining IP address" which never results in a connection.
I've tried the options listed in that guide you posted, but to no avail.
So, at this point, I'm wondering if it's just because I'm using an outdated WiFi hotspot app. If anyone has one that's been updated since a little under a year ago, I'd appreciate a link. Thanks!
Click to expand...
Click to collapse
Not sure which one you are using but I'm using the one right from the Play Store v3.3 beta 2. You can also get it from here. I just went back to SWG 1.18 from a 4.2.2 ROM and reinstalled and all is good. Everything connects just fine using those settings from the link I posted earlier.
klbjr said:
Not sure which one you are using but I'm using the one right from the Play Store v3.3 beta 2. You can also get it from here. I just went back to SWG 1.18 from a 4.2.2 ROM and reinstalled and all is good. Everything connects just fine using those settings from the link I posted earlier.
Click to expand...
Click to collapse
In the first post I listed which version I was using. Unfortunately, even the newest version fails to work. I don't get this. Maybe it has something to do with the OMJ ROM and how close to stock it is. Perhaps I should try a different ROM.
This is a far cry from the CM7 ROM I had on my EVO which allowed me to tether perfectly all the time without the hassle. Maybe I'll try CM again on my One.
I'm gonna download & flash OMJ's ROM & see if I can recreate it. You running the latest version right?
Sent from my HTCONE using Tapatalk 4
klbjr said:
I'm gonna download & flash OMJ's ROM & see if I can recreate it. You running the latest version right?
Sent from my HTCONE using Tapatalk 4
Click to expand...
Click to collapse
There was some kind of minor update that just came through. Not sure what it was. I haven't installed it yet. My version is current as of a week ago.
wolfbuck22 said:
There was some kind of minor update that just came through. Not sure what it was. I haven't installed it yet. My version is current as of a week ago.
Click to expand...
Click to collapse
Sorry. I downloaded the latest yesterday but was playing around with flex's & hawk's 4.2.2 ports. I'm about to flash in a couple mins and will post my results.
Similar issue here
I'm having issues with wifi tether on my HTC One, as well. I can tell you that if you set the Device-Profile to "Auto," it will create an ad-hoc connection that my Windows 7/Ubuntu Studio desktop will recognize. Ubuntu recognizes it as a regular wifi hotspot, and connects automatically. Windows recognizes it as an ad-hoc connection, and I have to connect manually. My Samsung Galaxy Tab 3 does not see the connection at all, and neither does my LG Blu-Ray player. If I change the profile to Generic ICS/JB (wlan 1), then other devices see the connection, and will even attempt to connect to it, but there is never a successful connection with internet access. If I choose Generic ICS/JB (wlan 0), then nothing sees it as a viable connection. I am running the stock sense ROM, and have done no updates (so I'm still at JB 4.1). I can tell you that wifi tether errors frequently for me, and I have to reboot quite a lot. If I leave my phone broadcasting overnight, then in the morning wifi tether thinks that I don't have root, and gives me the "your phone is in an unknown state" error message; at that point, the only way to stop the wifi is to reboot.
So, I can make it work, for a limited number of devices. I would like to use it as a wifi connection for my tablet and my Blu-Ray player, however. I have searched quite a bit to try to figure this out, and I haven't been able to find a reliable answer. Any help would be appreciated. Thank you.
I got mine to work. Can surf the web, check email, etc. now the damn thing will not stream video. I am connected to 4g and speed test on my ipad verify it but won't stream. Pisses me off.
wolfbuck22 said:
I'm running OMJ's ROM and using WiFi Tether TrevE Mod "Version 3.2-beta-modv5-***Synergized***"
Okay so even with the settings that everyone recommends for the HTCone, and a few modifications, I still cannot get the blasted thing to work.
Settings I've tried:
Profile: Generic ICS/JB(wlan0)
Setup-Method: Auto
Encryption ON (p/w is the correct format AFAIK, about 12 lowercase letters no numbers, similar to the default)
Changed SSID to "HTCone" no spaces
Wifi Driver Reload (1) checked
MSS Clamping checked
Routing Fix checked
With those settings, I can't even get it to broadcast. It says it's running but no devices can find it. It simply isn't there.
If I disable Wifi Driver Reload (1) it begins broadcasting. However, when I attempt to connect, the second device just sits there at "Obtaining IP Address..." for about 90 seconds then retries and gets stuck at "Authenticating" then back. An endless loop never resulting in a connection.
The most frustrating thing about this is that it was JUST working the day before. I didn't touch ANYTHING and it just decided to take a dump.
Addendum: I was looking at the notes in the bottom of the ABOUT screen and I noticed the updates are quite old. Is it possible I have an old version that doesn't work with the HTC One? I got it from QBKING77's website.
Click to expand...
Click to collapse
Try to go to advanced settings at the upper right portion of the settings. Then click LAN Settings > Reset to default settings. I have the same problem with you. I've tried it and it worked.

WIFI Stopped working.

I've had my two TP's rooted for years, mainly JC Sullins' builds. My wife's TP stopped connecting to our wireless, and she gave up on it a few years ago. I dusted it off, did a clean install with the TP Toolbox and loaded JC's Cyanogen 12.1-20160109. I also took the opportunity to delete the WEBOS since we never used it anyway. Well, the upgrade to a new operating system didn't fix my wireless problem. It still shows that it's trying to turn the wifi on. It never happens.
I've been searching for days, and still can't find a solution to this dilemma. I'm a firm believer of searching for an answer first, and hate to admit that I can't figure it out.
What do I need to do here?
I also loaded my TP with the same build, and it works like a champ. Mine never had a wifi connection problem.
I'm all ears.
Michael
wfdbackdraft said:
I've had my two TP's rooted for years, mainly JC Sullins' builds. My wife's TP stopped connecting to our wireless, and she gave up on it a few years ago. I dusted it off, did a clean install with the TP Toolbox and loaded JC's Cyanogen 12.1-20160109. I also took the opportunity to delete the WEBOS since we never used it anyway. Well, the upgrade to a new operating system didn't fix my wireless problem. It still shows that it's trying to turn the wifi on. It never happens.
I've been searching for days, and still can't find a solution to this dilemma. I'm a firm believer of searching for an answer first, and hate to admit that I can't figure it out.
What do I need to do here?
I also loaded my TP with the same build, and it works like a champ. Mine never had a wifi connection problem.
I'm all ears.
Michael
Click to expand...
Click to collapse
Give this a try, it's a shot in the dark but I had this happen back in CM7 or 9 days.
Power off bothfo the TP's. We'll use your's for the 'known good' device.
Change the channel on your router to a higher number, like maybe 12...
Power cycle the router. (sorry if this screws up any other devices that are attached.)
Power up TP#1 & see if it connects and verify that you can get out on the net.
Then try #2.
if a no-go go then grab this terminal emulator so we can grab some info using the good ol' command line.
I wondering if the Wifi interface is dead but holding out hope that it isn't.
_Dan
Thank you for the reply.
I really can't get to my router right now to try that.
When I turn on her wireless setting, it just says "Turning wifi on...." and never does. I never get to see a list of available networks.
So what is this wifi interface that you speak of? I'll start looking into that.
Better still install this for retrieving syslogs. Someone in another thread recommended it and it is a lot easier to use.
_Dan
I finally got the SysLog installed. Opened it up, and there is a statement that there is - "No root access. Without root access, it's not possible to get system or modem logs, and with some 3.x kernels it also may not be able to get kernel logs."

Categories

Resources