Database Develop

Unable to flash ROM Galaxy Ace S5830

Problem solved long ago
Delete thread

Wrong thread to post in.
Anyways,
When you use "update from SD card" option the code is installed from "update.zip" in sdcard - so if there is some garbage code in update.zip it will corrupt the installed ROM on the device (or even the kernel - as might have happened in your case) and errors like bootloop and errors in recovery show up.
That being the background ... you should ask around in the galaxy ace section for specific instructions to use odin to restore your friends phone
Here's a little guide on how to flash a ROM via ODIN by me:
Requirements:
- A Windows computer
- A Galaxy Ace plugged into the computer via USB
- You must have ODIN installed , duh !
- (Windows Vista/7 compulsory) Running ODIN with Administrative rights:
- Ended KIES via Task manager:
Instructions:
1 - Download your favourite firmware here
2 - Extract the .rar out using WinRAR or 7zip (password is samfirmware.com)
3 - Check if it's a FULL package or ONE package:
FULL Package instructions:
1 - Open up ODIN (MAKE SURE ALL REQUIREMENTS ARE MET)
2 - Set your phone in Download Mode (Home + Power + Volume Down)
3 - Once you have correctly entered Download Mode and plugged in , this should appear in ODIN:
4 - Place the files in this order:
OPS - Select the file named Cooper_v1.0.ops (or anything like that)
BOOT - Select the file named "APBOOT_S5830xxxxx_CL514579_REV03_user_low_true.ta r.md5"
where "xxxxx" = Your firmware version
Phone - Select the file named "CODE_S5830xxxxx_CL514579_REV03_user_low_true.tar. md5"
where xxxxx = firmware version
PDA - DO NOT PLACE ANYTHING
CSC - Select the file named "GT-S5830-MULTI-CSC-xxxxxx.tar.md5"
where "xxxxxx" = the CSC region
EFS - Select the file named "MODEM_S5830xxxxx_CL514579_REV03.tar.md5"
xxxxx = firmware version (Be VERYVERY careful with this EFS part)
After you're done , click on "Start" and let the magic reveal itself slowly......
ONE Package method:
1 - Open up ODIN
2 - Set your phone in Download Mode while plugged into USB
3 - Tick the option "One Package" in ODIN (Refer to previous ODIN picture)
4 - Select the only .tar.md5 file
Now press start and watch the magic.....
Click to expand...
Click to collapse
more of the above here
Good luck.

.
Thread moved. Would advise you to read forum rules and post in correct section.
Failure to comply with forum rules will result in an infraction and/or ban depending on severity of rule break.

Rishabh13 said:
Hello,
My friend used upd_1.zip from xda to root his phone and then flashed CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7 as well as its fix.
He didn't get the "install zip from sdcard" option so, he chose the "apply update from sdcard" option and selected CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7 halfway through it says "installation aborted" after this his phone doesn't proceed beyond the startup screen.
PLEASE HELP
Thanks in advance
PS: when I go to the recovery screen, a list of text comes up which says "unable to access...","cannot access cache", etc. All start with "E/..."
PPS: I am newbie of sorts and do not know how to use SuperOneClick and ODIN, though I downloaded them as recommended in http://forum.xda-developers.com/showthread.php?t=1034145
Click to expand...
Click to collapse
well your friend didn't cared to read requirements properly as to flash custom rom you need to have cutom recovery..
do odin flash to clean the things

Rishabh13 said:
Hello,
My friend used upd_1.zip from xda to root his phone and then flashed CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7 as well as its fix.
He didn't get the "install zip from sdcard" option so, he chose the "apply update from sdcard" option and selected CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7 halfway through it says "installation aborted" after this his phone doesn't proceed beyond the startup screen.
PLEASE HELP
Thanks in advance
PS: when I go to the recovery screen, a list of text comes up which says "unable to access...","cannot access cache", etc. All start with "E/..."
PPS: I am newbie of sorts and do not know how to use SuperOneClick and ODIN, though I downloaded them as recommended in http://forum.xda-developers.com/showthread.php?t=1034145
Click to expand...
Click to collapse
If already flash upd1.zip then reboot and flash cwm5 after that you can proceed to flash custom rom....
If not its will soft brick your ace hahahahah pls read the procedure before do flashing....
Sent from my GT-S5830 using xda premium

Right now just try to wipe everything, and format system!
Try this time to flash the custom rom correctly!
Choose zip from SDCARD and not apply update
If that doesn´t help
try flash with ODIN 4.38
SENIOR MEMBER POST +.+

Also to reboot after flashing the cwm file lol
Sent from my GT-S5830 using XDA App

Rishabh13 said:
Hello,
My friend used upd_1.zip from xda to root his phone and then flashed CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7 as well as its fix.
He didn't get the "install zip from sdcard" option so, he chose the "apply update from sdcard" option and selected CyanogenMod 7.1-cooper-KANG-RC1 Android 2.3.7 halfway through it says "installation aborted" after this his phone doesn't proceed beyond the startup screen.
PLEASE HELP
Thanks in advance
PS: when I go to the recovery screen, a list of text comes up which says "unable to access...","cannot access cache", etc. All start with "E/..."
PPS: I am newbie of sorts and do not know how to use SuperOneClick and ODIN, though I downloaded them as recommended in http://forum.xda-developers.com/showthread.php?t=1034145
Click to expand...
Click to collapse
hey mate its easy...just root via update.zip then download cwm4 or 5 frm xda choose apply update and click on it ...there u r ..u hav th cwm wth u...once u hav the cwm clik on install zip option ...happy flashng .

scourgeofgod said:
Wrong thread to post in.
Anyways,
When you use "update from SD card" option the code is installed from "update.zip" in sdcard - so if there is some garbage code in update.zip it will corrupt the installed ROM on the device (or even the kernel - as might have happened in your case) and errors like bootloop and errors in recovery show up.
That being the background ... you should ask around in the galaxy ace section for specific instructions to use odin to restore your friends phone
more of the above here
Good luck.
Click to expand...
Click to collapse
Thanks mate!

Root Galaxy Tab P6800 ICS 4.04

It's Root for Galaxy tab P6800 ICS4.0.4 Try it.......Works.
Root Galaxy tab P6800 ICS4.0.4
Instruction Below.
1. Download and install LATEST SAMSUNG KIES (or stand-alone USB drivers if you can find them)
2. Transfer the attached file root.zip to the EXTERNAL CARD on Galaxy Tab 7.7
3. Turn off the Galaxy Tab 7.7
4. Enter Recovery
- Hold Volume UP button + Power Button
- When TAB turns ON, RELEASE POWER BUTTON (Keep Holding Volume UP Button)
- Will Enter Recovery
5. Select install update from EXTERNAL Storage
6. Look for the file root.zip and select it with power button
7. When Finish, REBOOT. You're done!

Not all user know how to root. Will be great if you could put up the instruction.
We already have the root guide here: http://forum.xda-developers.com/showthread.php?p=21584547
If it work. Maybe you can update Jade to input on his OP IMO
PS: I'm rooted with Edan's DeoDex slim rom

does not work

Maybe put the "su" inside /system/xbin is better.
also if using the zip provided in OP should manually installed superSU from the Play store.
also busybox is not included yet, should manually inject to xbin.
The most stranger is why mount /system on mmcblk0p4, should on mmcblk0p9....in HC...
edited:ha...CWM.zip from NOTE, it a way I used to install zip for long..

from recovery, install CWM.zip
then use the CWM to disable the signature check and install the root.zip

Does not work (and will not work unless signature verification is first somehow disabled.)
OP, please update your post.

[Solved] any other alternative to flash
I lost root after upgraded to ICS and can't get into recovery too, any alternative I can flash this root ?
-------------------------------------------------------------
Success message:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/006> Removed!!
crazyking said:
It's Root for Galaxy tab P6800 ICS4.0.4 Try it.......Works.
Root Galaxy tab P6800 ICS4.0.4
Instruction Below.
1. Download and install LATEST SAMSUNG KIES (or stand-alone USB drivers if you can find them)
2. Transfer the attached file root.zip to the EXTERNAL CARD on Galaxy Tab 7.7
3. Turn off the Galaxy Tab 7.7
4. Enter Recovery
- Hold Volume UP button + Power Button
- When TAB turns ON, RELEASE POWER BUTTON (Keep Holding Volume UP Button)
- Will Enter Recovery
5. Select install update from EXTERNAL Storage
6. Look for the file root.zip and select it with power button
7. When Finish, REBOOT. You're done!
Click to expand...
Click to collapse

this is a working root for ICS :laugh:
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
- Choose apply update from external storage.
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once you had install the cwm recovery, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer

Thanks, these 2 files work!
Sent from my GT-P6800

Problem rooting
Rooting using two files: The first step is ok but for the second step CWM just restarts itself and I cannot select any option and randomly it reboots.

Fluxcore said:
Thanks, these 2 files work!
Sent from my GT-P6800
Click to expand...
Click to collapse
i tried it and it's work
---------- Post added at 02:59 PM ---------- Previous post was at 02:56 PM ----------
joojooman said:
Rooting using two files: The first step is ok but for the second step CWM just restarts itself and I cannot select any option and randomly it reboots.
Click to expand...
Click to collapse
do you choose an option then he restarts or it's just restarts itself

mashkuov said:
this is a working root for ICS :laugh:
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
- Choose apply update from external storage.
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once you had install the cwm recovery, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
Click to expand...
Click to collapse
It success by use your two file. I see superuser in my application but when i open titamium back up it say your device not have root privilege. How should i do?

mashkuov said:
do you choose an option then he restarts or it's just restarts itself
Click to expand...
Click to collapse
Whenever i select an option, it jumps to the first option and does nothing. Then i push the on/off button a couple of times and it restatrs.
Update 1: I managed to do it but no su icon and no root.
Update 2: O.K. I did it for the second time. I confirm that it works. THANKS MAN.

sopheaknhek said:
It success by use your two file. I see superuser in my application but when i open titamium back up it say your device not have root privilege. How should i do?
Click to expand...
Click to collapse
try to uninstall it and re install it !

mashkuov said:
this is a working root for ICS :laugh:
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
- Choose apply update from external storage.
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once you had install the cwm recovery, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
Click to expand...
Click to collapse
This worked beautifully on my GT-P6210 as well. Wish my phone were half this easy to root on GB
---------- Post added at 04:01 PM ---------- Previous post was at 03:57 PM ----------
sopheaknhek said:
It success by use your two file. I see superuser in my application but when i open titamium back up it say your device not have root privilege. How should i do?
Click to expand...
Click to collapse
I had a similar issue.
If mashkuov's solution of uninstall/reinstall does not work, try what I did.
I ended up going into the manage applications and made sure I killed Titanium Backup. I had to Force Close it twice, once in the Running, and once as a Cached process. Then I restarted, and this time I made sure I hit Allow , perhaps I accidentally blocked it the first time when I ran Titanium backup.
Also make sure it isn't somehow remembered as Disallowed in Super User (crazier things have happened... )

mashkuov said:
this is a working root for ICS :laugh:
- Download these 2 files ( CWM.zip and root.zip ) and put in your SDCARD:
- Reboot to recovery: (Hold Volume Up+Power till it reboot to recovery)
- Choose apply update from external storage.
- Choose CWM.zip and wait until CWM recovery appear.
- Once the cwm recovery appear: Touch the screen to choose and navigate the options
* This cwm recovery is only temporary cwm recovery.
Once you had install the cwm recovery, navigate and;
- Choose install zip from sdcard.
- Choose zip from sdcard.
- Choose root.zip ;and Yes - Install root.zip.
- Once done, choose reboot system now.
* Your device is rooted without permanent cwm recovery: If you don't need cwm recovery. You can stop at here.
You will find superuser app in your drawer
Click to expand...
Click to collapse
This worked like a charm for my tab. Thanks
Sent from my GT-P6800 using Tapatalk 2

how can i root the new hk rom... i tried the above method of installing the two files names cwm and root zips and it worked on the austrian rom... but it is not working on the hong kong rom for me... how to do it??

I have a question
when I try to move widget or drag on the screen. Sometimes it goes in to apps search mode. it is very annoying how to disable it.
I have 4.0.4

hammer of thor said:
how can i root the new hk rom... i tried the above method of installing the two files names cwm and root zips and it worked on the austrian rom... but it is not working on the hong kong rom for me... how to do it??
Click to expand...
Click to collapse
Retry? I use it without problem.
Sent from my GT-P6800 using xda premium

hammer of thor said:
how can i root the new hk rom... i tried the above method of installing the two files names cwm and root zips and it worked on the austrian rom... but it is not working on the hong kong rom for me... how to do it??
Click to expand...
Click to collapse
Did you try the given instructions?
Mine failed at first because I thought Cwm only uses buttons but it can be controlled via screen. (not like the recovery option)
Another thing I found out is that: The rooting instruction might be contrary to the Cwm options (instead from install from external sd, try browsing the zip file via internal sd) someone mentioned it here and it worked for me.
Sent from my GT-P6800 using XDA Premium HD app

Clockworkmod Recovery for GT-S5830I (0824)

Hi.everyone.
I come from China, I want to provide a usable CWM, which is embedded.
Based on Rafael kernel 0821, if there is any BUG, please tell me
Method of installation：
1. Download the "cwm0824.zip" and place in SD card-
2. Download cwm (ClockWorkRec5830i.zip) and place in sd card - http://forum.xda-developers.com/show....php?t=1552792
3. Switch off the phone. Press sound up + home and power button together to got to Samsung recovery mode.
4. Select "apply update from sdcard" ----->and choose ClockWorkRec5830i.zip. CWM will load.
5. Select "apply update from sdcard" and select the "cwm0824"
6. Wait...
7. Enjoy the cwm 5.0.2.6
0824
1, " backup and restore " revision of the " restore " not " system " recovery error.
2, " mounts and storage " amendments to " unmounts system " error.
3, correction of SD card can partition problem.
4, correction of backup to data error problem.
5, correction can backup sd-ext problem.
Tips: brush the CWM, in the use of " backup and restore " in the " Restore" option please don't restore other backup, which can restore the recovery backup, or it may cause not starting. Cause I have something in system Recovery. Remember!!!The original author: angeeks bbs-------pyf_3721
download link: http://www.mediafire.com/?roumzypyrdilrca
(P.S. I can't speak English, thanks to Google)

Wow! great job dev!

Did You Test It?
ANDROIDCUSTOMIZe said:
Wow! great job dev!
Click to expand...
Click to collapse
Is This working? You Tested it?

David Jacket said:
Hi.everyone.
I come from China, I want to provide a usable CWM 5.0.2.6, which is embedded.
Based on Rafael kernel 0813, if there is any BUG, please tell me
Method of installation：
1. Download my cwm 5.0.2.6 and place in SD card-
2. Download cwm (ClockWorkRec5830i.zip) and place in sd card - http://forum.xda-developers.com/show....php?t=1552792
3. Switch off the phone. Press sound up + home and power button together to got to Samsung recovery mode.
4. Select "apply update from sdcard" ----->and choose ClockWorkRec5830i.zip. CWM will load.
5. Select "apply update from sdcard" and select the cwm 5.0.2.6.
6. Wait...
7. Then you will have a permanent CWM 5.0.2.6
8. Enjoy.
There are 2 volumes, you must download 2 files
(P.S. I can't speak English, thanks to Google)
I think it could help you
Click to expand...
Click to collapse
Why 2 volumes????? Don't they have to be zip-files???

David Jacket said:
Hi.everyone.
I come from China, I want to provide a usable CWM 5.0.2.6, which is embedded.
Based on Rafael kernel 0813, if there is any BUG, please tell me
Method of installation：
1. Download my cwm 5.0.2.6 and place in SD card-
2. Download cwm (ClockWorkRec5830i.zip) and place in sd card - http://forum.xda-developers.com/show....php?t=1552792
3. Switch off the phone. Press sound up + home and power button together to got to Samsung recovery mode.
4. Select "apply update from sdcard" ----->and choose ClockWorkRec5830i.zip. CWM will load.
5. Select "apply update from sdcard" and select the cwm 5.0.2.6.
6. Wait...
7. Then you will have a permanent CWM 5.0.2.6
8. Enjoy.
There are 2 volumes, you must download 2 files
(P.S. I can't speak English, thanks to Google)
I think it could help you
Click to expand...
Click to collapse
cooperke said:
Why 2 volumes????? Don't they have to be zip-files???
Click to expand...
Click to collapse
I think I made a terrible mistake. I will upload again.

The new link has released

Did no one pay attention to it?

I tested it and I say thanks. Got job David Jacket. You all now what that means, no??? Install Install Install !!!!!v:good:v:fingers-crossed:v:highfive:

saeed14i said:
Is This working? You Tested it?
Click to expand...
Click to collapse
Yeah! This CWM works great! i have to install the cwm with the old cwm and works every boot in recovery mod

hey guys... don't forget to thank the man !!!!!!:highfive:

I found a bug. You can't make backup and you can't restore....
Had to flash previous kernel.

David Jacket said:
Hi.everyone.
I come from China, I want to provide a usable CWM 5.0.2.6, which is embedded.
Based on Rafael kernel 0813, if there is any BUG, please tell me
Method of installation：
1. Download my cwm 5.0.2.6 and place in SD card-
2. Download cwm (ClockWorkRec5830i.zip) and place in sd card - http://forum.xda-developers.com/show....php?t=1552792
3. Switch off the phone. Press sound up + home and power button together to got to Samsung recovery mode.
4. Select "apply update from sdcard" ----->and choose ClockWorkRec5830i.zip. CWM will load.
5. Select "apply update from sdcard" and select the cwm 5.0.2.6.
6. Wait...
7. Then you will have a permanent CWM 5.0.2.6
8. Enjoy.
There are 2 volumes, you must download 2 files
(P.S. I can't speak English, thanks to Google)
I think it could help you
Click to expand...
Click to collapse
Hello There,
I can do the first step in the Android system recovery with the ClockWorkRec5830i.zip and that loads up fine but when I go into clockworkmod recovery I dont have the option to "apply update from sdcard", only "install zip from sd", I tried this option and selected "CWM 5.0.2.6" but I get a "E: Error in /sdcard/clock work recovery/CWM5.0.2.6.zip (Status7)" error message.
Can you help, what am I doing wrong, thanks for your help.
Lee

Only1wilber said:
Hello There,
I can do the first step in the Android system recovery with the ClockWorkRec5830i.zip and that loads up fine but when I go into clockworkmod recovery I dont have the option to "apply update from sdcard", only "install zip from sd", I tried this option and selected "CWM 5.0.2.6" but I get a "E: Error in /sdcard/clock work recovery/CWM5.0.2.6.zip (Status7)" error message.
Can you help, what am I doing wrong, thanks for your help.
Lee
Click to expand...
Click to collapse
Try redownloading the file.

I have redownloaded the file and replaced on SD card but still get the same problem. Should I be installing the "CWM 5.0.2.6" file in the clockwork mod part(yellow text) or the Android recovery mode (orange text) part?
So frustrating, Im obviously doing something wrong!
p.s if I try to apply in the android update from from sdcard I get a status 2 error.

Only1wilber said:
I have redownloaded the file and replaced on SD card but still get the same problem. Should I be installing the "CWM 5.0.2.6" file in the clockwork mod part(yellow text) or the Android recovery mode (orange text) part?
So frustrating, Im obviously doing something wrong!
p.s if I try to apply in the android update from from sdcard I get a status 2 error.
Click to expand...
Click to collapse
I never had this error before... try placing the zip in your SD card's root directory (not inside folders)

Another great step for our Ace i Great job dev, alrdy pressed thanks button

Maybe mount data, system already mounted. After install the cwm Zip file
Sent from my GT-S5830i using xda app-developers app

Tips: brush the CWM, in the use of " backup and restore " in the " Restore" option please don't restore other backup, which can restore the recovery backup, or it may cause not starting. Cause I have something in system Recovery. Remember!!!

Awesome Work
David Jacket said:
This is the new download link h ttp://ww w.mediafire.c om/?19biblv888p i0mo
Remove the blanks
Click to expand...
Click to collapse
Great Work! I even flashed the new Rafael Kernel Using This Permanent CWM Recovery. Working Like a Charm. Thanks a lot and Keep more of the gud stuff for our phone comming

David Jacket said:
Hi.everyone.
I come from China, I want to provide a usable CWM 5.0.2.6, which is embedded.
Based on Rafael kernel 0813, if there is any BUG, please tell me
Method of installation：
1. Download my cwm 5.0.2.6 and place in SD card-
2. Download cwm (ClockWorkRec5830i.zip) and place in sd card - http://forum.xda-developers.com/show....php?t=1552792
3. Switch off the phone. Press sound up + home and power button together to got to Samsung recovery mode.
4. Select "apply update from sdcard" ----->and choose ClockWorkRec5830i.zip. CWM will load.
5. Select "apply update from sdcard" and select the cwm 5.0.2.6.
6. Wait...
7. Then you will have a permanent CWM 5.0.2.6
8. Enjoy.
(P.S. I can't speak English, thanks to Google)
I think it could help you
Tips: brush the CWM, in the use of " backup and restore " in the " Restore" option please don't restore other backup, which can restore the recovery backup, or it may cause not starting. Cause I have something in system Recovery. Remember!!!The original author: angeeks bbs-------pyf_3721
Click to expand...
Click to collapse
I get:
E: Error ir /tmp/sideload/package.zip
(status 2)
installation aborted
after applying the CWM5.0.2.6 update.

[GUIDE] Lollipop 5.1 for Symphony Roar A50

This Tutorial may also work for Other Android One Devices,But i can't ensure as i m using Symphony.
There are 3 Different Parts to Install Lollipop-->
1. Unlock Bootloader > 2. Install PhilZ Recovery > 3. Flash Lollipop 5.1
#1 Unlocking Bootloader---> Go to This Thread: http://forum.xda-developers.com/cro...ser-roms-recoveries-kernels-mods-how-t2908298
1. Download Universal ADB Driver installer from here.
2. Connect your phone and run the Universal ADB Driver installer. Click 'Install' button and a warning should pop up. Just click "Install anyway" and it should look like this:
3. Download ADT Bundle from here for Win-32 Bit and from here for 64-Bit . If you are unsure which version of windows you have just download the 32-Bit one.
4. Extract the zip file in your C:\ drive like this (You can install it wherever you like but this tutorials assumes this location for simplicity). Add adb and fastboot to system path by following this tutorial . This will allow you to run adb and fastboot commands from any location on cmdline.
3. Switch off your phone. Now, Press POWER BUTTON VOLUME UP button for about 5 seconds. A menu should appear. Note: VOLUME UP allows to navigate the menu (move down the menu). Press VOLUME DOWN button for selecting/choosing fastboot. On your phone, it should say something like
Code:
=> FASTBOOT MODE...
Connect your phone to the computer if it wasn't already.
4. Open CMD
5. On command prompt, Type:
Code:
fastboot devices
6. Now, Type the following commands:
Code:
fastboot oem unlock
fastboot format userdata
fastboot reboot
Now, your bootloader is unlocked.
Click to expand...
Click to collapse
#2 Install PhilZ Recovery--> http://forum.xda-developers.com/cro...wm-recoveries-symphony-roar-a50-mito-t3037919
DOWNLOAD PhilZ: http://d-h.st/Hl0P
Install recovery through fastboot:
1. Download the recovery.img from Download
2. Copy it to sdk/platform/tools,then Hold Shift and Right Click on Empty Space>Select Open Command prompt here
3. Reboot the phone into bootloader/fastboot mode
Code:
adb reboot bootloader
4.Flash the recovery image and reboot
Code:
fastboot flash recovery recovery.img
Code:
fastboot reboot
Click to expand...
Click to collapse
#Flashing 5.1---> http://forum.xda-developers.com/cro...ollipop-5-0-x-rom-backup-android-one-t3034288
DOWNLOAD LOLLIPOP HERE: http://d-h.st/yiOd
1. Download the zip and Rename to lollipop.zip and extract in the same Folder to your Sdcard's Clockworkmod/backup [if there is not any folder,make one] (It is a backup of stock rom that you can install it as described below)
2. You need latest PhilZ Touch recovery installed on your phone. If not installed, go here, download and flash the recovery.
3. Boot your device into Philz recovery
4. Now, go to Wipe and Format options -> Factory reset -> Wipe cache -> Wipe dalvik/ART cache -> Go back.
5. Now, choose Backup and Restore, then go to Misc Nandroid Settings and uncheck “MD5 checksum”
6. Go back and choose Custom restore from /sdcard option.
7. From the list of options, check “system” and “boot” options and then select start restoring it,then select lollipop.zip
8. Once done, reboot and you got Android 5.1 Lollipop.
Note: For the first time, it will take 5 – 10 minutes to boot up. Enjoy!
Click to expand...
Click to collapse

Here Is The Video Review Running Lollipop 5.1 On Symphony Roar A50!!

Is your dialpad animation smooth like other transition animations?

Move to sd supported?
Sent from my Sparkle V using XDA Premium 4 mobile app

@aan007bd Yeah! It is Smooth! No issues!
@9441Rahul9441 Yes,Move SD Card Supported! U can Also write to Sd.
One Bug i Found is: No Guest Mode Available

Oh great i think it would be better than indonesian right?
Sent from my Sparkle V using XDA Premium 4 mobile app

9441Rahul9441 said:
Oh great i think it would be better than indonesian right?
Sent from my Sparkle V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope,Doesnt matter! All Lollipop Build for Android one is Same! I Have Flashed the Indonesian.

Indonesian rom doesnt have move to sd.. i have used it before once
Sent from my Sparkle V using XDA Premium 4 mobile app

9441Rahul9441 said:
Indonesian rom doesnt have move to sd.. i have used it before once
Sent from my Sparkle V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I know! But Same Problem Persist in All other Version. See the FAQ
Thread,everyone has that sdcard prob! :/

is this stock backup rom was from mito a10 my backup rom
from this thread?
http://forum.xda-developers.com/cro...overies-symphony-roar-a50-mito-t3037919/page2
just curious

kurniawan_johar said:
is this stock backup rom was from mito a10 my backup rom
from this thread?
http://forum.xda-developers.com/cro...overies-symphony-roar-a50-mito-t3037919/page2
just curious
Click to expand...
Click to collapse
Haha No bro! Itz from all android one devices Indonesian one, Bro do u have Guest mode option while clicking Notification bar avatar!!?

no we dont have guest mode, but it can be done just edit build prop
oh i see, i was looking for roar lollipop rom
i think i'll wait for another lollipop rom from another country

kurniawan_johar said:
no we dont have guest mode, but it can be done just edit build prop
oh i see, i was looking for roar lollipop rom
i think i'll wait for another lollipop rom from another country
Click to expand...
Click to collapse
Yeah..git those code for enabling guest mode! But will it lag if i turn it on by editing?

bootlop
guys i got a boot loop on my Mito A10 android one, first when my phone runs normally i tried to flash it, but it failed, i got the tutorial not from this site but the other web site. So what shoul i do to get my phone back normally?

i got a problem it said "cannot open md5file" 'MD5 verfication failed"
what should i do?

When I will get Android Marshmallows update for Roar A50?
Android lollipop 5.1.1 already installed. Few days ago 2 proxy update was available. But no change happend after installing these.

HTC one m7 no su binary

Hey I'm a noob,
I have followed a video on how to root HTC one m7 , I unlocked boot loader an got teamwin recovery . I did everything what I seen in the video an I installed superuser from the recovery .. but when I open up the app it says install su binary an when I checked root checker its says it's not fully done ..
What am I doing wrong
Sent from my HTC One using XDA Free mobile app

cummo13 said:
Hey I'm a noob,
I have followed a video on how to root HTC one m7 , I unlocked boot loader an got teamwin recovery . I did everything what I seen in the video an I installed superuser from the recovery .. but when I open up the app it says install su binary an when I checked root checker its says it's not fully done ..
What am I doing wrong
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
If your phone is on lollipop, make sure to use the latest version of TWRP as older version includes outdated binary that doesn't work on lollipop. You can also flash the latest supers.zip manually from recovery.

I have gone in to team win recovery an installed it from there an this is what I keep getting Su if you have a custom recovery like twrp or cwm, that can be used to (try to) install the su binary . How would you like to install the su binary ?. I hit twrp
SuperSu will attempt to reboot your device into twrp or cwm ,
So I go back to the recovery team win . . I go to install an go down to superSU-v1.25zip swipe to confirm flash . Successful an know I hit reboot system. Android is updating app an know there is no SU binary installed an superSU cannot install it . This is a problem

alray said:
If your phone is on lollipop, make sure to use the latest version of TWRP as older version includes outdated binary that doesn't work on lollipop. You can also flash the latest supers.zip manually from recovery.
Click to expand...
Click to collapse
I'm also using TWRP v2.8.7 is that the newest one
Sent from my HTC One using XDA Free mobile app

I think I have a old superuser zip file an when I install it thats why it's theres no su binary ... Can you tell me the latest superuser zip file number thanks
Sent from my HTC One using XDA Free mobile app

cummo13 said:
I think I have a old superuser zip file an when I install it thats why it's theres no su binary ... Can you tell me the latest superuser zip file number thanks
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
Yes 1.25 its not the latest its pretty old.
uninstall your SU app from the phone and
1- boot in twrp
2- select reboot in system
3- you'll be prompted to install root
4- select "yes"
(you need a recent twrp version as explained in post 2)
or
1- download latest supersu.zip
2- boot in twro
3- select "install"
4- select your supersu.zip and flash it.
latest version is 2.46 and its the only one that will work with lollipop
https://download.chainfire.eu/696/SuperSU

alray said:
Yes 1.25 its not the latest its pretty old.
uninstall your SU app from the phone and
1- boot in twrp
2- select reboot in system
3- you'll be prompted to install root
4- select "yes"
(you need a recent twrp version as explained in post 2)
or
1- download latest supersu.zip
2- boot in twro
3- select "install"
4- select your supersu.zip and flash it.
latest version is 2.46 and its the only one that will work with lollipop
https://download.chainfire.eu/696/SuperSU
Click to expand...
Click to collapse
Thank you so much .. It worked .
Sent from my HTC One using XDA Free mobile app

alray said:
If your phone is on lollipop, make sure to use the latest version of TWRP as older version includes outdated binary that doesn't work on lollipop. You can also flash the latest supers.zip manually from recovery.
Click to expand...
Click to collapse
I've got 5.0.2 but I have the same problem and can't install UPDATE-SuperSU-v2.45 using recovery: when I enterin recovery mode it says:
Android system recovery<3e>
LRX22G release-Keys
Volume up/down to move highlight;
enter buttonto select.
reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
apply from phone storage
apply from SD card
E:missing bitmap oem_unlock_bg
(Code -1)
E:missing bitmap oem_unlock_bg_yes
(Code -1)
E:missing bitmap oem_unlock_bg_no
(Code -1)
handle_cota_install: install cwpkg to /data/data/cwtemp/cwpg.zip
handle_cota_install: install cwprop to /data/data/cwtemp/cwprop
Write host_mode success
handle_cota_install: No CW files. Skip cw installation.
E:failed to mount /cache (Invalid argument).. try emmc moun
E:Can't find device node for Mount point /cache
What can I do? Thank you.

Lux80 said:
I've got 5.0.2 but I have the same problem and can't install UPDATE-SuperSU-v2.45 using recovery
Click to expand...
Click to collapse
when I enterin recovery mode it says:
Android system recovery<3e>
LRX22G release-Keys
Volume up/down to move highlight;
enter buttonto select.
reboot system now
apply update from ADB
wipe data/factory reset
wipe cache partition
reboot to bootloader
power down
view recovery logs
apply from phone storage
apply from SD card
Click to expand...
Click to collapse
This is the stock recovery.... not twrp
All you need to know already explained 2 posts before yours, and btw you did quoted the answer you are looking for
If your phone is on lollipop, make sure to use the latest version of TWRP as older version includes outdated binary that doesn't work on lollipop. You can also flash the latest supers.zip manually from recovery.
Click to expand...
Click to collapse
So your are not using TWRP neither the latest supersu.zip file.