I have a rooted Droid 4 running 4.1.2. I have only flashed a ROM onto a phone once before, on an LG Ally a few years ago. So I'm proceeding cautiously. I've tried to do some research and just confused myself further. I'm just going to post my questions here and hopefully you guys can help. I appreciate it in advance.
1. I don't have custom recovery on the phone yet. It's just rooted at this point. What recovery would you guys recommend? I've seen some references to GooManager -- would that app automate the custom recovery installation for me, or do I need to download Safestrap or something like that to the computer and install from there?
2. Do I have to root again after that?
3. What is the highest current stable version of Cyanogenmod that will run on this phone?
Cannonball3804 said:
I have a rooted Droid 4 running 4.1.2. I have only flashed a ROM onto a phone once before, on an LG Ally a few years ago. So I'm proceeding cautiously. I've tried to do some research and just confused myself further. I'm just going to post my questions here and hopefully you guys can help. I appreciate it in advance.
1. I don't have custom recovery on the phone yet. It's just rooted at this point. What recovery would you guys recommend? I've seen some references to GooManager -- would that app automate the custom recovery installation for me, or do I need to download Safestrap or something like that to the computer and install from there?
2. Do I have to root again after that?
3. What is the highest current stable version of Cyanogenmod that will run on this phone?
Click to expand...
Click to collapse
1. I don't know anything about GooManager or if it is compatible with the D4 but safestrap is a really great piece of software that is easy to use. I highly recommend it. Just download and install the app on your phone. Then open the app and install recovery. From there, when you reboot, you will be given the option to boot into safestrap recovery where you can install your ROMs.
2. You will not need to re-root your phone.
3. I am running CM10.2 (Android 4.3) nightlies and have found them to be very stable. I've also heard the latest stable version of CM10.1 (Android 4.2.2) is very good as well.
Now I have a Wi-Fi problem
kwyrt said:
1. I don't know anything about GooManager or if it is compatible with the D4 but safestrap is a really great piece of software that is easy to use. I highly recommend it. Just download and install the app on your phone. Then open the app and install recovery. From there, when you reboot, you will be given the option to boot into safestrap recovery where you can install your ROMs.
2. You will not need to re-root your phone.
3. I am running CM10.2 (Android 4.3) nightlies and have found them to be very stable. I've also heard the latest stable version of CM10.1 (Android 4.2.2) is very good as well.
Click to expand...
Click to collapse
Thank you. I got CM10.2 nightly for 9/28 installed and working. There is only one problem I found so far -- I can't get wi-fi to connect at home. It says it's authenticating, then it saves, then it says there is an authentication problem. I have no problems when I run stock, but it will not work with CM 10.2
I researched online and found lots of people having problems. Some people re-flashed the ROM and it fixed it, others tried this, that or the other and weren't even sure what fixed the problem. Some never fixed it at all.
I did the Wipe/Factory Reset. I re-flashed the ROM. I went back and flashed the 9/27 nightly since 9/28 didn't work. I rebooted my router. I did a Forget on the network and re-added it. My password is correct. I'm at a loss. Not having WiFi with this ROM is like having a great new car that does everything you want except it doesn't do left turns.
Cannonball3804 said:
Thank you. I got CM10.2 nightly for 9/28 installed and working. There is only one problem I found so far -- I can't get wi-fi to connect at home. It says it's authenticating, then it saves, then it says there is an authentication problem. I have no problems when I run stock, but it will not work with CM 10.2
I researched online and found lots of people having problems. Some people re-flashed the ROM and it fixed it, others tried this, that or the other and weren't even sure what fixed the problem. Some never fixed it at all.
I did the Wipe/Factory Reset. I re-flashed the ROM. I went back and flashed the 9/27 nightly since 9/28 didn't work. I rebooted my router. I did a Forget on the network and re-added it. My password is correct. I'm at a loss. Not having WiFi with this ROM is like having a great new car that does everything you want except it doesn't do left turns.
Click to expand...
Click to collapse
Sounds like you have tried most of the things I would have tried to fix it. One other thing you can try: open the Terminal app. Type "SU" and press enter. Then type "wificall.sh" and press enter. That will recalibrate the wifi on the phone. One other thing that comes to mind is I remember some people mentioning when they flashed a new ROM the D4s MAC address got changed which screwed with the wifi connection to their router. I can't remember what the fix was for it, but might be something to google if wifical does not fix it.
kwyrt said:
Sounds like you have tried most of the things I would have tried to fix it. One other thing you can try: open the Terminal app. Type "SU" and press enter. Then type "wificall.sh" and press enter. That will recalibrate the wifi on the phone. One other thing that comes to mind is I remember some people mentioning when they flashed a new ROM the D4s MAC address got changed which screwed with the wifi connection to their router. I can't remember what the fix was for it, but might be something to google if wifical does not fix it.
Click to expand...
Click to collapse
Thanks for the wifical tip. Wi-Fi is now working at my office. When I get home, I'll see if it did the trick there.
Cannonball3804 said:
Thank you. I got CM10.2 nightly for 9/28 installed and working. There is only one problem I found so far -- I can't get wi-fi to connect at home. It says it's authenticating, then it saves, then it says there is an authentication problem. I have no problems when I run stock, but it will not work with CM 10.2
Click to expand...
Click to collapse
Wifi has been hit and miss lately. I had to go back to 9/26 nightly. Didn't have working wifi until 10/2 nightly.
Some of the guys in the development thread found some clues as to why. The must be working on the wifi drivers in the nightlies right now.
http://forum.xda-developers.com/showthread.php?t=2102723&page=83
I just flashed the latest CM (this is my first phone mod) and I working on getting gapps to instal. I have the latest downloaded and am looking for guidance as to how to install the package. This thread looks like a proper place to address that step as it appears to be exactly what you do after you get CM running.
Thanks!
Huli13 said:
I just flashed the latest CM (this is my first phone mod) and I working on getting gapps to instal. I have the latest downloaded and am looking for guidance as to how to install the package. This thread looks like a proper place to address that step as it appears to be exactly what you do after you get CM running.
Thanks!
Click to expand...
Click to collapse
Find the gapps for your version of cm and flash like you did the ROM. Usually you would flash the gapps when you do the ROM.
Sent from my XT894 using Tapatalk
Cannonball3804 said:
I have a rooted Droid 4 running 4.1.2. I have only flashed a ROM onto a phone once before, on an LG Ally a few years ago. So I'm proceeding cautiously. I've tried to do some research and just confused myself further. I'm just going to post my questions here and hopefully you guys can help. I appreciate it in advance.
1. I don't have custom recovery on the phone yet. It's just rooted at this point. What recovery would you guys recommend? I've seen some references to GooManager -- would that app automate the custom recovery installation for me, or do I need to download Safestrap or something like that to the computer and install from there?
2. Do I have to root again after that?
3. What is the highest current stable version of Cyanogenmod that will run on this phone?
Click to expand...
Click to collapse
1. I prefer safestrap, you can install up to 4 more ROMs in addition to stock ROM. And it's the safest method to try those ROMs
2. That depends on the ROM you are going to install. Most custom ROMs have been rooted already.
3. CM11 that is Android 4.4 KitKat, sweet eh? (correction : CM11 is not stable development yet, but it is latest and nicely working)
Related
Hello folks,
Well I recently made the switch from iPhone OS to Android , picked up a used Nexus One in pretty good shape, no scratches, like new and what not, the phone is amazing BUT I am having a hard time understanding some stuff (I thought I was getting a stock N1, and it seems it has been loaded w/ custom ROM and is rooted and unlocked. -which not bad in my opinion, but...
I still have some questions, I am trying to update to Froyo 2.2, and im not sure if I will ever get OTA since the phone has been messed around with and if i manually update to 2.2 it will cause trouble.
1) When I boot the phone it shows the "lock" to be opened, so I am assuming it is oem unlocked, the phone has working WiFi tethering (just like in 2.2)
2) also in the menu of the phone there is an app "superuser permission" which thats why assume the phone is also rooted
And finally In the "About phone" I get the following:
firmware 2.1-update1
baseband
32.36.00.28h_4.06.00.12_7
kernel
2.6.34-cyanogenmod
mod version
cyanogenmod-5.0.8-n1-test3
build
epe54b
I have reset the phone to factory settings, but the same info comes up everytime. the phone runs flawless, no lags, overall i love the phone.
And finally if anybody knows please feel free to share, I am trying to open port 80 on the N1 while it is running Wifi tethering and the only way i have found to do this is if the N1 is rooted, correct me if im wrong... i have a rovio that is refusing to connect to the N1s network...
Any positive input will be highly appreciated! thanks!
Your not very confused!
Your phone is unlocked and has root. its running cyanogenmod-5.0.8-n1-test3.
You can install a custom froyo rom without too much of a problem from recovery. Remember to nandroid-backup everything from recovery first.
Get into recovery by holding down the volume down button as you press the power button to power on the phone.
Heres an example of tethering via usb/forwarded port
http://blog.tangorangers.com/2009/02/tetherbot_android_and_slackware_how_to/
you can install 2.2 with no problem but you have to manually do it. you might get a notification for ota's but you won't be able to install them. just install it manually.
Man you guys are awesome! thanks for clearing this up for me.
atomoz said:
Man you guys are awesome! thanks for clearing this up for me.
Click to expand...
Click to collapse
Yeah man, you're money. For a used phone it is set up in possibly the best way possible for someone new to android and ready for you to throw the new CM6 ROM on there. You even have the proper radio already. You're good to go.
You can install Froyo in various ways. If you want total stock you can follow the instructions on this link and let OTA froyo install itself. If you need root you can download that from HERE
This method requires SDK installed with Fastboot on your computer with mandatory USB Drivers.
Or you can go the very easy way and use ROMs that is allready cooked, ready to flash in recovery right over your old ROM, like the link that is in my signature. It works great for me and is pretty much stock with root and a couple of extras you can delete via ADB if you don't need them..
Just download the Rom, drop it on the root of your SD Card and flash away in Recovery. all done!
What you are running is a test version of Cyanogen which is not the stable version. So it seems the previous owner didn't bother flashing it.
Seen an alpha 3 ICS rom. Can I just download that and flash it over my current rom or does it habecto be done certain way. I've flashed before on my evo but this seems a little bit more complicated
Sent from my SPH-P100 using XDA App
I'd rather go the full procedure they describe within their thread - imho especially you have needs for clockworkmod. Found that to be a quite safe way for me.
I would I just don't have access to a pc. Does ICS run fine on your tablet. Is it worth it
Sent from my SPH-P100 using XDA App
Once you have CWM Recovery installed, getting the ICS Alpha on your tab is not difficult if it's listed as supported in the thread.
Only thing: This is an ALPHA build. That means many things are not functional. The build is aimed at developers/testers.
Having given a shot at it, this build is surely not a daily driver for someone who needs its tab to be functional and reliable. Many of those problems have work arounds however but since the tablet is not mostly used by myself, I did not take the risk of having it be unreliable...
In short: it should work and not eat your hamster... But it is not a fully functional rom yet, be prepared for some trouble... Be sure you know how to go back in case of trouble... and read instructions carefully
If you want a good ICS rom here ya go. FYI!!! THIS IS FOR CDMA TABS!!!
Get rooted and CWM'd via Rodderick's thread in our Development section.
From there do the following (all credit to JT from here on out)
Download http://k.22aaf3.com/jt1134/vzwtab/cwm-recovery-5.0.2.7.tar
Extract the contents. You will have two files zImage and recovery.bin
Odin these two files to your tab while your tab is plugged in to the PC and in Download mode. This will bring your clockworkmod up to 5.0.2.7 which is a must to install the rom I'm about to link.
Next go to this thread
http://rootzwiki.com/topic/11697-rom-cdma-aosp-ics-cm9-build-31-0104-x-2/
At the bottom of the first post download the 3.1 ROM the 3.1 Patch and the gapps files.
Once those are downloaded boot your tab up to normal operations and plug it into your PC again. Now transfer those three files to your tab.
Boot up into clockwork recovery wipe the cache, dalvik, and do a factory data reset. Then flash the 3.1 file first, then flash the 3.1 Patch, then flash the gapps files.
If everything says it installed correctly the only things that won't be working are camera (which it does work in panorama mode) and possibly 3G. (Never tested 3G as I only use wifi).
Can you please post pictures and how can I check which cwm I already have? If I already have 5.0 can I just go ahead and flash? One more thing is this a whole new ICS or the ones going around. Thank you much
So I checked and I got 4.0 cwm. With that said. I don't have access to a pc. Is there any other way to upgrade to 5.0 cwm? PLEASE someone reply with yes. I'm getting bored with this andcwpuld like to try ICS. Thanks
rjumawan said:
So I checked and I got 4.0 cwm. With that said. I don't have access to a pc. Is there any other way to upgrade to 5.0 cwm? PLEASE someone reply with yes. I'm getting bored with this andcwpuld like to try ICS. Thanks
Click to expand...
Click to collapse
Without access to a PC I think you are making life very difficult for yourself.
You do not state what Tab you have; below I linked to the install for the P1010 only...I did this for reference because you will see it required Odin to flash it i.e. access to a PC.
http://forum.xda-developers.com/showpost.php?p=20195348&postcount=1
Thank for the reply. Yeah I know it makes it, harder just seeing if there was a way around it. I'm playing with the sprint galaxy tab. Not much to play with out there for it.
Hello, I have had a touchpad for some time and but CM9 and CWM on it some time ago, but it started having some issues recently. So I figured I should try and reinstall a newer version of CM and start from scratch.
I went to this post http://forum.xda-developers.com/showthread.php?t=2026692 and downloaded both the skz+tenderloin-1.10.zip and the gapps zip.
I then placed those into the Download folder on the touchpad.
This is where things took a turn. I rebooted to get into CWM, upon selecting it from the boot menu it kept restarting back to the boot menu. After a few tries it got into CWM. I then wiped the data and did a factory reset, wiped the cache, and then wiped the dalvik like the post said to do. I then went to install zip from sdcard. Found the skz+tenderloin zip and chose to install that. CWM says it starts to install but then before the progress bar fills up at all...it resets back to the bootloader.
At this point I am at a loss with what to do and I would really appreciate any help I can get with this.
UPDATE: I figured starting from scratch would be the best bet, so I have uninstalled CM9 and CWM using ACMEUninstall. Now I am wondering if it is worth using CM10 as my default Android or should I stick with the best CM9.
Either way, if I should use CM9 or 10 can someone either help me or point me in the right direction for the best tutorial on doing this properly?
Restore a backup then DL an updated version of CM9 to flash or upgrade to ACMEInstaller3 to give you a larger system partition along with the latest version of CWM in order to install a CM10 rom apart from oats which does not require the extra space .
There are numerous guides and you should probably read up on a little bit before just flashing a rom to avoid the problems you are having .
sstar said:
Restore a backup then DL an updated version of CM9 to flash or upgrade to ACMEInstaller3 to give you a larger system partition along with the latest version of CWM in order to install a CM10 rom apart from oats which does not require the extra space .
There are numerous guides and you should probably read up on a little bit before just flashing a rom to avoid the problems you are having .
Click to expand...
Click to collapse
The issue I am encountering is there is a ton of info out there, some outdated some not. I restored back to stock webOS with nothing else. I have ACMEInstaller 3 in the Palm directory, so I am ready to install the most stable/best CM9 currently out there, I just don't know which tutorial is the best one to follow. Could you perhaps just link me to one you recommend?
http://rootzwiki.com/topic/31548-ho...-with-sound-camera-microphone-updated-232013/
Should I use CM10 or stick with 9? People say there are still issues with it and it's more of a preview build and not really meant to be used as your standard OS.
Saix_XIII said:
Should I use CM10 or stick with 9? People say there are still issues with it and it's more of a preview build and not really meant to be used as your standard OS.
Click to expand...
Click to collapse
I installed CM9 based on the link above with the AIO package. It worked flawlessly, hopefully my freezing/restarting issues happen less often now. Thanks to all who offered help.
Saix_XIII said:
Should I use CM10 or stick with 9? People say there are still issues with it and it's more of a preview build and not really meant to be used as your standard OS.
Click to expand...
Click to collapse
I can tell you that I use my Schizoid as my daily driver, and it's not a preview.
Hello guys,
I have a samsung gt-i9000 with cyanogen 10.1.3 and a few days ago I had experienced some problems, the home button stopped working. I tried quite a few things, based on the info I found on this site and others (like factory reset), but no joy.
SO I thought to myself, better reflash the ROM, but to be honest, if I do that, I might as well install the latest one (10.2.1), and so I decided to do that, but before I start I have a few questions:
I had a look around but I couldn't really find a definite answer to the following questions, so I thought I might post here.
1)Has anybody encountered any issue on the gt-i9000 with the latest ROM?
2)Can I backup all my apps, upgrade the ROM and then reinstall everything from the backup, rather than downloadeing all the apps again? I have never done that before, so I am not sure if it is possible
3)I had a look at the cyanogen mode site and found the relevant info http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd, but I was wondering something: occasionally on my phone a message appears
and asks me whether I want to update the ROM to the latest available one. I have always dismissed that, but I am thinking, can I do the upgrade from there without going through the trouble of reflashing
it (following the instructions above), or is it essentially the same thing?
4)In the instructions it says "The install guide assumes the Galaxy S is running Android 2.3.". Now, last time I have upgraded - from cyanogen 7 to 10.1 - I attempted to install directly 10 over 7 and things
went horrible wrong. I then reflashed the ROM to 2.3 and then installed cyanogen 10.1 and it was OK. DO I have to do the same thing again and install 2.3. first and then 10.2? If so where do I get 2.3 from?
Thanks
Sorry, can somebody move this under questions, just realized that this isn't the right place.
duratto said:
Hello guys,
I have a samsung gt-i9000 with cyanogen 10.1.3 and a few days ago I had experienced some problems, the home button stopped working. I tried quite a few things, based on the info I found on this site and others (like factory reset), but no joy.
SO I thought to myself, better reflash the ROM, but to be honest, if I do that, I might as well install the latest one (10.2.1), and so I decided to do that, but before I start I have a few questions:
I had a look around but I couldn't really find a definite answer to the following questions, so I thought I might post here.
1)Has anybody encountered any issue on the gt-i9000 with the latest ROM?
2)Can I backup all my apps, upgrade the ROM and then reinstall everything from the backup, rather than downloadeing all the apps again? I have never done that before, so I am not sure if it is possible
3)I had a look at the cyanogen mode site and found the relevant info http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd, but I was wondering something: occasionally on my phone a message appears
and asks me whether I want to update the ROM to the latest available one. I have always dismissed that, but I am thinking, can I do the upgrade from there without going through the trouble of reflashing
it (following the instructions above), or is it essentially the same thing?
4)In the instructions it says "The install guide assumes the Galaxy S is running Android 2.3.". Now, last time I have upgraded - from cyanogen 7 to 10.1 - I attempted to install directly 10 over 7 and things
went horrible wrong. I then reflashed the ROM to 2.3 and then installed cyanogen 10.1 and it was OK. DO I have to do the same thing again and install 2.3. first and then 10.2? If so where do I get 2.3 from?
Thanks
Click to expand...
Click to collapse
duratto said:
Hello guys,
I have a samsung gt-i9000 with cyanogen 10.1.3 and a few days ago I had experienced some problems, the home button stopped working. I tried quite a few things, based on the info I found on this site and others (like factory reset), but no joy.
SO I thought to myself, better reflash the ROM, but to be honest, if I do that, I might as well install the latest one (10.2.1), and so I decided to do that, but before I start I have a few questions:
I had a look around but I couldn't really find a definite answer to the following questions, so I thought I might post here.
1)Has anybody encountered any issue on the gt-i9000 with the latest ROM?
2)Can I backup all my apps, upgrade the ROM and then reinstall everything from the backup, rather than downloadeing all the apps again? I have never done that before, so I am not sure if it is possible
3)I had a look at the cyanogen mode site and found the relevant info http://wiki.cyanogenmod.org/w/Install_CM_for_galaxysmtd, but I was wondering something: occasionally on my phone a message appears
and asks me whether I want to update the ROM to the latest available one. I have always dismissed that, but I am thinking, can I do the upgrade from there without going through the trouble of reflashing
it (following the instructions above), or is it essentially the same thing?
4)In the instructions it says "The install guide assumes the Galaxy S is running Android 2.3.". Now, last time I have upgraded - from cyanogen 7 to 10.1 - I attempted to install directly 10 over 7 and things
went horrible wrong. I then reflashed the ROM to 2.3 and then installed cyanogen 10.1 and it was OK. DO I have to do the same thing again and install 2.3. first and then 10.2? If so where do I get 2.3 from?
Thanks
Click to expand...
Click to collapse
1) Didn't use CM, been on OmniROM
2) You can use Titanium Backup
3)Yeah, you could do that, update it via CMUpdater
4)Just before you install a ROM with a higher android Version, always wipe /system partition.
cool thanks!
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Jeffril said:
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Click to expand...
Click to collapse
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
NoDze said:
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
Click to expand...
Click to collapse
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Jeffril said:
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Click to expand...
Click to collapse
Okay, This is SFSP by @sgspluss which is a pretty fast, stable and battery-friendly slimmed down version of stock ICS. It is available for both Old and NewBL, so you might want to try that first. This is AIO Toolkit. I know that you've used it and bricked your phone, but try again, and for the love of God install the nvflash drivers because most people skip that part. You have to do it manually and if you're running Windows 8 you need to disable Driver Signature Verification. But yeah, you switch bootloaders with this.