Database Develop

[Q] Help Please, from 2.3.6 to JB

Hi everyone.
I am on this:
Android version: 2.3.6
Baseband version: N7000XXLB2
Kernel version:[email protected] #2
Build number: CheckROM NoteHD V6
I don't know why but sometimes I (Vol Up+Home+Power) and is CWM 6 and sometimes CWM 5
I bought the phone a month ago it came with a 4.0 version (good one), I searched in here best ROMs (CheckROM came across) download it and now I have 2.3.6 version.
I have downloaded 4 different kinds of JB version from across the forums and none of them have work....
I am thinking I download from here http://forum.xda-developers.com/showthread.php?t=1901191 the wrong Kernel version... I download XXLSC-XJB (JB Leak) I don't know if I have to use this XXLSA-XJB (JB Leak), or XXLS7-XJB (JB Leak), or any other I just download the first one.
Can anybody help me on how to instal the JB version of Android with CWM...
Thanks
:laugh:

are you just installing JB kernels on a GB rom? The phone wont even bootup
You need to install JB rom for a JB kernel to work.
there are a lot of JB roms in the Android Development section. Download and install using CWM. Read the procedure in the ROM thread.

melvinelelefante2000 said:
Hi everyone.
I am on this:
Android version: 2.3.6
Baseband version: N7000XXLB2
Kernel version:[email protected] #2
Build number: CheckROM NoteHD V6
I don't know why but sometimes I (Vol Up+Home+Power) and is CWM 6 and sometimes CWM 5
I bought the phone a month ago it came with a 4.0 version (good one), I searched in here best ROMs (CheckROM came across) download it and now I have 2.3.6 version.
I have downloaded 4 different kinds of JB version from across the forums and none of them have work....
I am thinking I download from here http://forum.xda-developers.com/showthread.php?t=1901191 the wrong Kernel version... I download XXLSC-XJB (JB Leak) I don't know if I have to use this XXLSA-XJB (JB Leak), or XXLS7-XJB (JB Leak), or any other I just download the first one.
Can anybody help me on how to instal the JB version of Android with CWM...
Thanks
:laugh:
Click to expand...
Click to collapse
Flash PhilZ kernel (Philz Safe Kernel 3.73 for XXLSC )
http://forum.xda-developers.com/showthread.php?t=1901191
Reboot recovery in to PhilZ kernel then you can make a full wipe and flash the JB of your choice. I recommend Ultimate Rom.
http://forum.xda-developers.com/showthread.php?t=1970626

Cassie's xtraLIite v11.1 AROMA and v6 supercharger scripts and way you go + lots more but that will came for u whenu want...
Flash kernel,rebot into recovery,wipe all,flash rom,reboot (might be good to fix premission in advance)

You can search for ultimate jb rom. Also you need to install hydracore kernel. I was able to install it and it works like a charm.
Sent from my GT-N7000 using Tapatalk 2

First I would recommend flashing an official Samsung ICS ROM with Odin. Then flash a safe kernel with CWM (ex. Speedmod or Hydracore), also through Odin or Mobile Odin. Once with a safe kernel, reboot into recovery, wipe everything using my guide below, then flash the JB ROM of your choice (put it in your external SD card before). I recommend Ultimate JB XXLSC.
http://forum.xda-developers.com/showthread.php?t=2024481

[Q] Galaxy I9000 Froyo 2.2 to Jelly Bean the right way

Hi there
cousin of mine is unsure how to proceed from a rooted 2.2 Frojo to Jelly Bean, here are his questions:
Hello,
I need your help because I don´t know the next steps to flash
my Android.
I rooted my international Galaxy S I9000 with vodafone branding.
(I flashed the "CF-Root-XX_XEU_JPO-v1.2-Busybox-1.17.1" kernel)
Then I installed the ROM Manager app to install CWM 2.5.
I have still e2 Recovery but I can load the zip in this mode
every time.
All data is already backed up and saved (IMEI/EFS Backup is done).
I used the Root Explorer for this step.
Now I´m not sure which steps are needed to install either
Gingerbread, ICS or Jelly Bean. Which roms/kernels are compatible?
My final version should be Cyanogenmod Mackay Jelly Bean.
Now I have Froyo 2.2
Does anyone have appropriate info or links that may help me
because the forum search didn´t serve the right infos for me.
PDA: I9000BUJP7
PHONE: I9000BUJP5
CSC: I9000GVD2JP5
Build Info: 2010.10
Firmware Version: 2.2
Kernel Version: 2.6.32.9 [email protected] #1
Build Number: FROYO.BUJP7
Thanks in advance

http://www.youtube.com/watch?v=1RoZU5ZPMS4&list=UUawwqTCK5egDfXdJe3EH0XQ&index=13
http://www.youtube.com/watch?v=iRnH13sRAIc&list=UUawwqTCK5egDfXdJe3EH0XQ&index=9

Hey
You first need to have official gingerbread (provided by samsung) bootloaders as some roms need these..
You can follow the update and root guide below..(Works for the Internation Version Only!! Model No: GT-I9000)
After succesfull booting flash the macky rom with the given instructions in his thread..
Done..
Sent from my Awesome GT-I9300..!

[Q] Updating to a newer ROM version

Hi,
I am currently on 4.1.2 12.0.A.2.254, rooted eXistenZ Ultra 3.X (LB).
If I am to upgrade to the newest eXistenZ Ultra 4, would I first need to update my stock firmware to 12.1.A.1.205, re-root, apply latest Doomkernel etc. and then flash the ROM or does the ROM already contain the newest firmware and kernel?
I know the set of instructions are on the second post, however, I just wanted to verify if this method is outdated for the newest ROM update.
Thank you.

Seems that updating the firmware also updates the corresponding kernel.
Please close thread, thanks.

the Existenz thread provides a direct link to the zip file for the existenz rom u mentioned... the ZIP file is not an OTA instead its an entire ROM of around 756MB.. its the latest version 4.0.0 based on latest xperia firmware 12.1.A.1.205 ... just download the ZIP.. flash it using any recovery... after flashing again install another recovery u want and root the device...
try it bro...
all the best... :good:
LINKS TO THE ROM : https://mega.co.nz/#!UNUFjQJC!t9vruI9kHgnzXnKL5_Vsi4d6HeQ18nNeGITY4_M-BjI
http://fs2.filegir.com/hamid308/Xperia_SP_eXistenZ_Ultra_4.0.0.zip

[Q] How to flash MIUI ROM on my Samsung Galaxy Note N7000, running CM11,KitKat

Hello everyone,
I am usnig Samsung Galaxy Note N7000, running CyanogenMod 11 latest nightly, Android 4.4.4.
I want to try MIUI ROM. But in the entire MIUI thread I havent been able to find any thread talking about how to Flash MIUI ROM on devices already running on Android 4.4.4 KitKat.
So can someone please guide me how flash my mobile with MIUI ROM.

Why should there be countless instructions for every version of all available Roms?
Simply follow the installation instructions given by the owner:
Installation:
- Download latest PhilZ N7000 kernel http://forum.xda-developers.com/show....php?t=1901191
- Make a Backup of your current rom
- Flash it
- Reboot recovery
- Make a Fullwipe (dont forget to wipe /preload )
- install the rom

ThaiDai said:
Why should there be countless instructions for every version of all available Roms?
Simply follow the installation instructions given by the owner:
Installation:
- Download latest PhilZ N7000 kernel http://forum.xda-developers.com/show....php?t=1901191
- Make a Backup of your current rom
- Flash it
- Reboot recovery
- Make a Fullwipe (dont forget to wipe /preload )
- install the rom
Click to expand...
Click to collapse
Thanks for speaking out something. But my question was, my mobile is already running on KitKat (Android 4.4.4) but the official developer version of MIUI for Galaxy Note N7000 is still on "Author: MIUI Official Team and Version: 3.2.22 （V4）" which is on Jellybean. So its actually downgrading. And before Installing KitKat I remember that there is a change how KitKat worked compared to Jellybean. So wont there be a different procedure while downgrading from KitKat to Jellybean??
Which is what I am unable to understand. So do tell me if there is a procedure to follow or any points to remember while downgrading from KitKat CM11 to Jellybean MIUI.

[Q] Problem with Galaxy Note GT-N70000 with version XXLRK

Hello guys,
I have a Galaxy Note GT N7000 and i want to root it. My previous phone was an iPhone so i used to work with IOS for the jailbreak... , android is something new for me. I read a lot of tutoriels concerning this but i have always issues with my version which is XXLRK (android 4.0.4) and the process bug on " E:signature vérification failed. " i want to root the phone with the last version of C-ROM based on 4.4.4 . Could someone give me links to update my kernel, the file to root, and the CWM so that i can install the C-ROM 4.4.4.
Sorry if there is some mistakes, english is not my first language. don't forget, my version is XXLRK and thank you guys

Search for Philz kernel for 4.0.4 and install it using recovery. This will give you cwm. But you will need a newer version of cwm to flash kk. So install raw kernel .. Phone will not boot into android after installing the new kernel. But you will get a new recovery and flash the kk ROM and gapps.