Does anyone else use the apps that have pocket change in it, i am posting this because I recently made it to unlock the bootloader of my SE Xperia x8, and installed a JB ROM, Lite CM10 specifically, and I'm not able to log, or even see the Pocket Change window, it closes automatically when I try to open it, it does happen only in JB roms because in the GB ones it goes correctly, but I really like the ROM i'm using, so i hope someone could respond me if is there any way to solve this problem, thank you
Related
So I got myself into really funny situation I'm stuck.
I worked with xperia mini pro everything was fine.
Now I got x8 well older one... And all i did was rooted it with flashtool.
Everything was working fine from that point with root rights like root uninstaller (I just tested didn't deleted anything).
And then I made "factory reset" Deletes everything from sd card and bla bla bla well you guys know what i mean.
After that I wanted to install kernel but it's not that easy. So I first read alot and did not do that. Since it would require bootloader unlock and thats pain with 11W29.
So just after factory rest somehow I bricked my phone...
But it's interesting brick... VERY INTERESTING.
It turns on, it has flash mode. I can update it via update setup and tried to do that.
Nothing helps all I get is :
phone loading normally, then there is no menu, not sony ericsson home, not go launcher, no settings available no nothing...
To explain my problem i will upload screenshot.
And I can't flash it now since it's not bootloader unlocked.
And I can't access anything from phone.
This is what you call hard brick?
Hard brick is when You can't turn on phone, so there isn't any way to install ROM again. In Your case it's strange soft brick, cause it looks like ther isn't any launcher If You can enter into flash mode than You should reinstall stock ROM and kernel using flashtool (with version 0.2.9.1 cause it's more stable with older devices, such as x8).
Its not bricked. / You can use android commander to push recovery.
It's stock already and I tried stock launcher via updatesetup of SE,
And I think i need bootloader unlock to flash it ? or I'm wrong.
And Later on i will try with older version of flashtools
thx for answers guys.
No, unlocked bootloader allows You to install custom kernels, but some ROMs works also with stock SE kernel, so You don't have to unlock bootloader to install custom ROM or back to stock ROM
So i'm back again on same problem....
I have a Question if you wanna flash phone from flashmode u don't have to have unknown sources and debugging turned on.
Since i can't do that...
My following actions :
I will try to install fresh win7 32bit, since now i'm on 64 and on this system i was working with mini pro xperia, so maybe that may be the case...
I'll try to flash it with older version of flashtools 0.2.9.1 I guess if i remember it right (but on this windows OS It gives me : Error Flashing. aborted)
And I installed flashtools drivers and everything i'm 100% sure of that.
What I tried :
I also tried flashing it from Linux / ubuntu . same as with windows i get :
Error flashing. Aborted.
PCC gives me error when i try to repair it.
Update Service Dose everything as normal but same problem remains I don't get launcher or something just that empty desktop
And I would love you guys if you would give me few links to stock firmware of
x8 11W29 / E15i
And if you have something else to suggest please help me ;D
Hello, sorry for necroing thread but i have exactly same problem like OP, and as he didnt post solution i would like to ask how to do it.
Thanks for your time!
X8 OFW
deamerz said:
Hello, sorry for necroing thread but i have exactly same problem like OP, and as he didnt post solution i would like to ask how to do it.
Thanks for your time!
Click to expand...
Click to collapse
Try Flashing This via FlashTool.
TheScriptKitty said:
Try Flashing
Click to expand...
Click to collapse
Hello and thanks for your reply. I tried flashing my x8 with provded ftf file and the problem still remains the same. If it is any help i can normally increase volume, access emergency calls and keyboard and other things. But the screen remains blue. And i also remember that the thing which is supposed to appear here is the language setup, if there is any way to set up main language outside android system i guess that could help.
Again thanks for your reply and your time!
deamerz said:
Hello and thanks for your reply. I tried flashing my x8 with provded ftf file and the problem still remains the same. If it is any help i can normally increase volume, access emergency calls and keyboard and other things. But the screen remains blue. And i also remember that the thing which is supposed to appear here is the language setup, if there is any way to set up main language outside android system i guess that could help.
Again thanks for your reply and your time!
Click to expand...
Click to collapse
Try Flashing a Costume ROM for stock kernel via Recovery.
Here is a list of ROMs. Just make sure you download one that says (Stock).
Hello everyone I have a problem that I couldn't find answers.When my p7310 is on CM9,CM10 or other cm related roms,the start animation keeps flashing(just like the display issue for the cmw recovery,if some of you know that).Just lock and unlock the screen it will get back to normal,but it's still kinda annoying.Plus when I turn off the tab it will automatically turn on.No this kind of issues when on stock roms.
If someone can help me,I do appreciate it.I have searched the forum but I didn't get the solutions.
Thank you.
Hi!
I have problem with my i9070. All starts with auto-rotation problem. It works only for few minutes on new system, or till I will turn on move functions. Then my g-sensor freeze. On GPS-status it shows nothing - no magnetic field, rotation, acceleration. When I start searching google about this problem I found that all HTC have similar problem (like this ) I tried to use that tips on my phone and figure out what's wrong. Unfortunately Samsung don't have files like /data/misc/AK8973Prms.txt . I start research and found files /etc/calib.dat /etc/sensor.dat /etc/param.dat wich seems to be related to the g-sensor. I watch how these files look like when g-sensor works on fresh system, and how they look like when g-sensor is corrupted. Again unfortunately nothing happened - the same permissions, the same values. Then I started to flash different roms, different kernels. I have 2.3.6 than 4.1.2, than back to 2.3.6 (by this tutorial ) than again 4.1.2. Than I installed this Kernel. My auto-rotation works for an hour without move functions (the best score). Now it's corrupted again.
I have a guess, that it's the driver faults, calibration problem, or sth in /etc folder. I'm not a dev, I can use terminal, give you all data I have. I wipe my phone hundreds times. One of my solution is to copy ALL data from another device (I don't know is it possible) and watch what happens. Maybe with this tools.
What I should do? Please help me, I will be very grateful!
Martin
martinan said:
Hi!
I have problem with my i9070. All starts with auto-rotation problem. It works only for few minutes on new system, or till I will turn on move functions. Then my g-sensor freeze. On GPS-status it shows nothing - no magnetic field, rotation, acceleration. When I start searching google about this problem I found that all HTC have similar problem (like this ) I tried to use that tips on my phone and figure out what's wrong. Unfortunately Samsung don't have files like /data/misc/AK8973Prms.txt . I start research and found files /etc/calib.dat /etc/sensor.dat /etc/param.dat wich seems to be related to the g-sensor. I watch how these files look like when g-sensor works on fresh system, and how they look like when g-sensor is corrupted. Again unfortunately nothing happened - the same permissions, the same values. Then I started to flash different roms, different kernels. I have 2.3.6 than 4.1.2, than back to 2.3.6 (by this tutorial ) than again 4.1.2. Than I installed this Kernel. My auto-rotation works for an hour without move functions (the best score). Now it's corrupted again.
I have a guess, that it's the driver faults, calibration problem, or sth in /etc folder. I'm not a dev, I can use terminal, give you all data I have. I wipe my phone hundreds times. One of my solution is to copy ALL data from another device (I don't know is it possible) and watch what happens. Maybe with this tools.
What I should do? Please help me, I will be very grateful!
Martin
Click to expand...
Click to collapse
Just know this - NEVER FLASH FIRMWARE FROM OTHER PHONE. You will get not just problem with sensor, but with everything.
And other thing, files that work on other phone will not work on our. You can copy/paste those file but it will mean nothing.
If it work like you think, we would have CM10.1 long time ago...
And you tried it with lot of software, you do not think it is some hardware issue? You have warranty?
Hi all,
I recently purchased a second hand z1 c6903 (telstra branded), and decided I would start off by loading the iHackers custom rom on. (based off instruction in http://forum.xda-developers.com/showthread.php?t=2439328 and http://forum.xda-developers.com/showthread.php?t=2716182). Now I didn't use it a whole heap before doing this but I didn't notice any issues with the display before starting.
After the first step of downgrading to the Firmware 14.1.G.1.534 the display started going nuts. I suspected something may have gone wrong and started from scratch on another computer and re-flashed the firmware. Problem persisted but everything other than the display seemed to work so I continued rooting the phone, backing up the TA, unlocking the bootload and installing the rom. It all seemed to go fine.
Its hard to describe the issue with the display, its flickering and distorted (tried to make a vid sorry about the quality though https://youtu.be/nyD1o28ipdY)
If you can see in the video it does not do it really in some apps like the calendar and clock, others it does at first then stabilises, doesn't seem to do it at all in the drag down notification menu. Even though its difficult to see the icons, if you know where they are, they seem to respond fine like nothings wrong.
I searched everywhere but couldn't find anyone with a similar issue (May be out there but because the z1 has had such widespread issues with the touch screen thats all I could seem to find).
Was hoping someone with more experience or that has dealt with a similar issue could help in diagnosing the problem or provide a solution?
Thanks in advance
Dean
Wow o.o weird.
Did you flash the latest firmware version before flashing iHackers ROM?
U should try to flash another Kernel. There are many based on stock rom, like FXtrinity and X Honami. try them
Thanks guys.
I didn't flash to the latest, probably should have tried before continuing. Is that something worth trying now (I have never had any issues like this with roms etc I don't know where to start?) I also had flashed to the Kernel.ftf for C6903 (.133) as in the instructions.
I just tried the X-Honami v6 kernal. Still the same.
Anybody have any ideas?
Update:
I bricked it trying to revert back the the telstra branded firmware. Red flashing light. It did vibrate at one stage after pressing the power button but nothing since. Have just been charging it until I get a chance to try and fix it. Doesn't really detect it at all when connected via usb but the usb connection sound keeps going off.
Hey guys, i need a help with something that happened in my Z1 after i unlocked the bootloader.
Well, i did the unlock to install some ROMs, i installed all pretty good withouth any problems but something was wrong...
I installed whatsapp, and trying to access the whatsapp web i saw that my phone won't read the qrcode, the camera keeps focusing in a loop and the code changes...
I tried in another computer and the same thing happened, i tried also another phone in my PC and worked, well...
Looking for help through the internet i didn't found anything that works, so my last hope is here in XDA.
Someone can help?