Related
Hi there! I was excited to get S5830IXXLK3_S5830IBTULK1_BTU firmware from samfirmware.com and flash it and use the latest custom kernel from Rafael.Baugis with it.
When I flashed 201212101860-E3-boot.img it completely killed my service. I enter the settings and it reports out of service. I says there is signal strength but I cant connect to the network or anything. I am on 3 (three) [H3G]
I tried 2 other custom kernels also: odin-kernel.tar from hell_lock (http://forum.xda-developers.com/showthread.php?t=20221470 and: PDAnitKernelNoSplash.tar from axyllum (http://forum.xda-developers.com/showthread.php?t=2026654)
Neither worked and did the same as Rafael's kernel. I thought a lot about it and tried flashing different basebands etc to see if that changed anything but to no avail I was stumped once again.
I went to a s5839i F/W from samfirmware.com S5839IBULE2_S5839IVOPLE1_VOP and the kernel works fine with that so in conclusion its the latest XXLK3 F/W that stops it working? Did Samsung 'fix' XXLK3 to not work with custom kernels? guess I go back to the old F/W and such :crying:
How can I solve this and get the kernel to work with XXLK3? I tried Alucard1989pl Deodex version of XXLK3 and same problem no service.
EDIT: Tried GT-S5830i Czech Republic 2012 November Android 2.3.6 S5830IXXLK2 S5830IXEZKL1 So far it works so its not the latest but its fine with the customs =D shame about XXLK3 though
I have a s5839i that came with stock BULE2 firmware
It now has XXLK3 (XXLK1 baseband) and it works fine with rafaelbaugis
Samsung will never "fix custom kernels", they directly allow people to modify their kernel by posting the sourcecode on their site
What country and carrier do you have?
Does the stock XXLK3 kernel give you service?
Interesting
ZakooZ said:
I have a s5839i that came with stock BULE2 firmware
It now has XXLK3 (XXLK1 baseband) and it works fine with rafaelbaugis
Samsung will never "fix custom kernels", they directly allow people to modify their kernel by posting the sourcecode on their site
What country and carrier do you have?
Click to expand...
Click to collapse
I am in the UK and my Carrier is H3G it is also the s5839i PAYG from three.co.uk it orginally had PDA: S5839iXXLD4 CSC: S5839iH3GLC2 MODEM/Phone: S5839iNELD1 but I lost that as I could not/or know how to back up from the phone as its my first Android device and indeed first smartphone too.
Maybe there is a particular bug with my firmware? though, neither XXLK3 nor the deodexed one worked, then again maybe its the CSC?
ZakooZ said:
Does the stock XXLK3 kernel give you service?
Click to expand...
Click to collapse
Yes. I would not have even bothered flashing the custom if it did not
I went to S5830i firmware to get CWM recovery using the David Jacket method but that was the only time it worked as the latest CWM kernels from Raf don't work on my device they jus stick on first screen. The e3 ones are ok though. Kinda buged me as I bought the CWM recovery pro app when I had it enbedded and working not I cant use :crying:
I'm sure there is a bug with this firmware, also see this thread. dNik17, the reason you can't get service even though you have signal is because for some reason, Android refuses to read our device's IMEI number on XXLK3. When your service was dropping out, if you had looked at your IMEI number in phone settings I can pretty much guarantee you it would have been blank at that time.
I have experienced this problem with the stock XXLK3 kernel as well as Rafael's and Hell Lock's. It does seem to be somewhat kernel dependent (and also possibly ROM dependent), for instance if you flash between stock and custom kernels it often fixes or recreates the problem. If you go into testing mode and turn off the radio and then turn it back on that sometimes fixes it also.
However, I think I may even have experienced it with stock ROM, stock kernel. I tried lots of different variations of ROMs and kernels in an attempt to nail down what exactly is going on but the issue seems to be quite unpredictable at times and difficult to repeatedly reproduce. I do know that XXLK3 has an updated stock kernel so I don't know if that has anything to do with it.
XXLK2 was fine and had no such problem.
@makeyourself thanks for the info! I am currently reverted to XXLK2 with latest Rafael.Baugis, I gave up hope of it working properly xD. I did have a back up of the partition with the IMEI info in but I did not try restoring it. I backed it up using galaxy toolboox.
I see your cooking a rom!!! good luck with that, I have tried using the kitchen a few times and but I cant seem to get the rom imported properly from the stock rom from samfirmware. I wish you more luck than I had!
dNik17 said:
@makeyourself thanks for the info! I am currently reverted to XXLK2 with latest Rafael.Baugis, I gave up hope of it working properly xD. I did have a back up of the partition with the IMEI info in but I did not try restoring it. I backed it up using galaxy toolboox.
I see your cooking a rom!!! good luck with that, I have tried using the kitchen a few times and but I cant seem to get the rom imported properly from the stock rom from samfirmware. I wish you more luck than I had!
Click to expand...
Click to collapse
Thank you mate, appreciate it :good:. Yeah I did use dsixda's kitchen just to kick things off and deodex the ROM. I use Debian, a Linux distro day-day anyway and I think that helps when it comes to extracting firmwares in tar format etc.
Yeah, the XXLK3 issue is a bit of an odd one, I don't think the efs partition is being corrupted or wiped as the IMEI number comes straight back if you switch kernels / ROMs / firmwares or occasionally just by effectively rebooting the phone. For whatever reason the ROM or the firmware is just refusing to read the efs information that is still sitting there intact. I'm sure someone will work out exactly what's going on soon anyway!
you flashed the "PHONE"(MODEM) in Odin? i think was the Modem.md5 , it comes from other country, i had that problem, just flash the Modem.md5 of my country (colombia)(MODEM_S5830M_WHLE2.tar)
carlos9545 said:
you flashed the "PHONE"(MODEM) in Odin? i think was the Modem.md5 , it comes from other country, i had that problem, just flash the Modem.md5 of my country (colombia)(MODEM_S5830M_WHLE2.tar)
Click to expand...
Click to collapse
No I don't think it can be that because I'm from the UK and downloaded the UK XXLK3 firmware. But also XXLK2 has the same modem and works fine.
Sent from my GT-S5830i using xda app-developers app
dagnabbit
makeyourself said:
No I don't think it can be that because I'm from the UK and downloaded the UK XXLK3 firmware. But also XXLK2 has the same modem and works fine.
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
I tried many different modems as I thought that was the logical issue but none worked with the custom kernels and XXLK3. The only time I had XXLK3 working was on the stock kernel. I am guessing that there is some difference in XXLK3 kernel that is not addressed in the custom kernels yet.
I would concur that its a problem reading the IMEI.
XXLK2 (Czech) is working nice for me atm with XXLK1 modem.
I think its wise to stick with the XXLK2 firmware at the moment.
There is definitely something weird with the S5830i, when I flashed the deodexed lk3 from this site it simply refused to boot until I flashed the Rafael img and kernel. It does have perfectly fine service though.
Sent from my GT-S5830i using xda app-developers app
Viprdxd said:
I think its wise to stick with the XXLK2 firmware at the moment.
Click to expand...
Click to collapse
I agree its working nice for me at the moment. I am using the deodexed version from Alucard1989pl :highfive:
I've learned to stay away from custom kernels because each of them are unidimensional - developers use a source code from Samsung that's always incomplete and behind the release, and each dev. works for his device, that might be a S5830c (Rafael), a Chinese S5830i (hell_lock) or the more common among users here Indian S5830i. Guess what? each variant is different, something might work on one (phone book contacts, headphones, signal strenght, 3g) but not on others. That's why I don't approve the use of "universal" next to "kernel" - sure it boots all of them, but do everything works?
I would prefer kernel developers join the android kernel kitchen project, and find ways to add their mods there, so that every user could mod their own kernel.
When it comes to custom roms, you should never flash a full wiping package (repartition) that was not meant for your phone. Always Splitfus the new rom, and replace csc, phone and bootloader with your original ones.
Hi All,
First i am a new comer for this community and new user for an android device .
I bought a new Samsung galaxy S Advance(GT-i9070). It came with Gingerbread. It was actually a phone with 768 RAM-I clearly verified this with the shop when I bought it. Last day I upgraded my phone to Jell bean with official Russian firmware (XXLPZ) and reset to factory default settings.
But now i am getting following issues on my phone.
It seems my devices is very slow and Stucks.Specially contacts,Media player,Messages. Also full RAM Capacity seems 521 MB at Application manager. All applications are now consuming memory from total 521 MB memory.Where is remaining memory? How can I obtain the remaining memory to speed my phone?
Mobile-networks---->Access point does not show any settings to setup APN to mobile network.
Some people on web says to root the phone , install ROM manager will solve these kind of problems. But i have called to shop and verified that rooting will void warranty.If i rooting is the solution ,Is there any possibilities to back it to Unroot when i need my warranty?
I saw there is a custom ROM also available to Jellybean 4.2.Is it possible to restore stock ROM later if i upgrade to Custom ROM?
What is /are ultimate solution/solutions all of my above problems.I hope all friends from this forum will guide me to sort this out
Thanks in advance
relax
thabotharshan said:
Hi All,
First i am a new comer for this community and new user for an android device .
I bought a new Samsung galaxy S Advance(GT-i9070). It came with Gingerbread. It was actually a phone with 768 RAM-I clearly verified this with the shop when I bought it. Last day I upgraded my phone to Jell bean with official Russian firmware (XXLPZ) and reset to factory default settings.
But now i am getting following issues on my phone.
It seems my devices is very slow and Stucks.Specially contacts,Media player,Messages. Also full RAM Capacity seems 521 MB at Application manager. All applications are now consuming memory from total 521 MB memory.Where is remaining memory? How can I obtain the remaining memory to speed my phone?
Mobile-networks---->Access point does not show any settings to setup APN to mobile network.
Some people on web says to root the phone , install ROM manager will solve these kind of problems. But i have called to shop and verified that rooting will void warranty.If i rooting is the solution ,Is there any possibilities to back it to Unroot when i need my warranty?
I saw there is a custom ROM also available to Jellybean 4.2.Is it possible to restore stock ROM later if i upgrade to Custom ROM?
What is /are ultimate solution/solutions all of my above problems.I hope all friends from this forum will guide me to sort this out
Thanks in advance
Click to expand...
Click to collapse
hey dude welcome to android as well as xda developers....i know these abt these lags.very first get the latest firmware for sgsa irrespective of the country u reside in.the jb firmware is new and has alot of bugs which will be cleared with updates...u should'nt have done jb update so soon...u must hav played wid ur device 4 a while .....in android these are bugs just install less apps and don not mess wid ur device unless u get a stable jb.....be calm sammy will release a stable firmware soon....hope so
thabotharshan said:
Hi All,
First i am a new comer for this community and new user for an android device .
I bought a new Samsung galaxy S Advance(GT-i9070). It came with Gingerbread. It was actually a phone with 768 RAM-I clearly verified this with the shop when I bought it. Last day I upgraded my phone to Jell bean with official Russian firmware (XXLPZ) and reset to factory default settings.
But now i am getting following issues on my phone.
It seems my devices is very slow and Stucks.Specially contacts,Media player,Messages. Also full RAM Capacity seems 521 MB at Application manager. All applications are now consuming memory from total 521 MB memory.Where is remaining memory? How can I obtain the remaining memory to speed my phone?
Mobile-networks---->Access point does not show any settings to setup APN to mobile network.
Some people on web says to root the phone , install ROM manager will solve these kind of problems. But i have called to shop and verified that rooting will void warranty.If i rooting is the solution ,Is there any possibilities to back it to Unroot when i need my warranty?
I saw there is a custom ROM also available to Jellybean 4.2.Is it possible to restore stock ROM later if i upgrade to Custom ROM?
What is /are ultimate solution/solutions all of my above problems.I hope all friends from this forum will guide me to sort this out
Thanks in advance
Click to expand...
Click to collapse
1. Root + install custom kernel. It will fly. :laugh:
2. Never had need to look for access point setting.
3. On JB you will not increase binary counter with rooting, like on GB. You can remove all evidence by flashing JB over again. "SU" file that provide root will be wiped.
4. Yes, you can use custom ROM, and then go back to stock by flashing stock firmware with Odin.
shut_down said:
1. Root + install custom kernel. It will fly. :laugh:
2. Never had need to look for access point setting.
3. On JB you will not increase binary counter with rooting, like on GB. You can remove all evidence by flashing JB over again. "SU" file that provide root will be wiped.
4. Yes, you can use custom ROM, and then go back to stock by flashing stock firmware with Odin.
Click to expand...
Click to collapse
Wow what a great news Let me clear on this scenario , ....Flashing Stock ROM(Ginger Bread) again after played with rooted and Custom Rom (Jelly bean )Cant be tracked to void warranty.Am i correct?
ksguptalive said:
hey dude welcome to android as well as xda developers....i know these abt these lags.very first get the latest firmware for sgsa irrespective of the country u reside in.the jb firmware is new and has alot of bugs which will be cleared with updates...u should'nt have done jb update so soon...u must hav played wid ur device 4 a while .....in android these are bugs just install less apps and don not mess wid ur device unless u get a stable jb.....be calm sammy will release a stable firmware soon....hope so
Click to expand...
Click to collapse
Thank you,Thank you :angel: I don't have idea how they are releasing updates.But now i flashed with Russian firmware ,My country is Sri Lanka(Asian country),Can i able to get update for Russian firmware at my county? or only i can able get update for SL firmware.I am sure my device is from Poland.Does this make any sense in update.If i want to downgrade to Stock rom again ,which firmware i need to use?Sri Lanka(I hope there is no such a think) or Poland firmware?
thabotharshan said:
Hi All,
First i am a new comer for this community and new user for an android device .
....
Last day I upgraded my phone to Jell bean with official Russian firmware (XXLPZ) ...
.....
Thanks in advance
Click to expand...
Click to collapse
I guess you do not realize that Samsung has launched three versions.
LPY 7th January 2013: A very bad rom.
LPZ 21st January 2013: A bad rom.
LQ4 7th February 2013: Very good version. Stable and perfectly functional for everyday use.
Consider LPY and LPZ as a big mistake. Should never have been released.
Одг: [Q] Samsung Galaxy S Advance ( GT I9070 ) Performace problem at Jelly bean 4.1.2
thabotharshan said:
Wow what a great news Let me clear on this scenario , ....Flashing Stock ROM(Ginger Bread) again after played with rooted and Custom Rom (Jelly bean )Cant be tracked to void warranty.Am i correct?
Click to expand...
Click to collapse
Yeah, only thing to check is that you didn't increased binary counter before. GB have method to root that increase it. But you can reset it now, there is Shaaans method in developer section of our phone forum.
Sent from Galaxy S Advance
---------- Post added at 08:21 PM ---------- Previous post was at 08:19 PM ----------
thabotharshan said:
Thank you,Thank you :angel: I don't have idea how they are releasing updates.But now i flashed with Russian firmware ,My country is Sri Lanka(Asian country),Can i able to get update for Russian firmware at my county? or only i can able get update for SL firmware.I am sure my device is from Poland.Does this make any sense in update.If i want to downgrade to Stock rom again ,which firmware i need to use?Sri Lanka(I hope there is no such a think) or Poland firmware?
Click to expand...
Click to collapse
It is not location related, you will get updates from country that your phone firmware is. So if you use Russian, the you will get update when it come for that country.
Sent from Galaxy S Advance
shut_down said:
Yeah, only thing to check is that you didn't increased binary counter before. GB have method to root that increase it. But you can reset it now, there is Shaaans method in developer section of our phone forum.
Sent from Galaxy S Advance
---------- Post added at 08:21 PM ---------- Previous post was at 08:19 PM ----------
It is not location related, you will get updates from country that your phone firmware is. So if you use Russian, the you will get update when it come for that country.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Now i got clear idea.i dint root my device when i use GB also.i Just upgraded JB.I Checked with some application,My device is not rooted yet.So i am going to upgrade to "XXLQ4 " .one of friend mentioned this in this thread,and root the phone.When i need warrenty related issue i will replace all with stock ROM.Is this a good approach?
ADR USR said:
I guess you do not realize that Samsung has launched three versions.
LPY 7th January 2013: A very bad rom.
LPZ 21st January 2013: A bad rom.
LQ4 7th February 2013: Very good version. Stable and perfectly functional for everyday use.
Consider LPY and LPZ as a big mistake. Should never have been released.
Click to expand...
Click to collapse
Thanks,How can we upgate LPZ to LQ4?Is that same as i did previously when i install LPZ?
Одг: [Q] Samsung Galaxy S Advance ( GT I9070 ) Performace problem at Jelly bean 4.1.2
thabotharshan said:
Now i got clear idea.i dint root my device when i use GB also.i Just upgraded JB.I Checked with some application,My device is not rooted yet.So i am going to upgrade to "XXLQ4 " .one of friend mentioned this in this thread,and root the phone.When i need warrenty related issue i will replace all with stock ROM.Is this a good approach?
Click to expand...
Click to collapse
Yeah. Just when you want to go back do not just use your firmwear, first flash things from guide how to downgrade. You have it on general forum I think. And rooting JB do not increase binary, like it was early on GB untill that other method.
Sent from Galaxy S Advance
shut_down said:
Yeah. Just when you want to go back do not just use your firmwear, first flash things from guide how to downgrade. You have it on general forum I think. And rooting JB do not increase binary, like it was early on GB untill that other method.
Sent from Galaxy S Advance
Click to expand...
Click to collapse
Thanks Thanks...This is a great forum and Thanks you very much.
just download the whole firmware and flash it through odin.there are no problems with region u reside in.you can flash firmware of any region it wont create any problems and would work like a charm.
Sent from my GT-I9070 using xda app-developers app
I did like u said.now playing with my device
Sent from my GT-I9070 using xda app-developers app
You do not need to download again again the latest version....just install kies on your computer and just connect phone with usb.....kies will show update available.....it will update automatically
Sent from my GT-I9070 using xda premium
Одг: [Q] Samsung Galaxy S Advance ( GT I9070 ) Performace problem at Jelly bean 4.1.2
rohan.narula said:
You do not need to download again again the latest version....just install kies on your computer and just connect phone with usb.....kies will show update available.....it will update automatically
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
That is the case if yoh do not use custom kernel with custom recovery. If you do, do not do that. You will soft brick. And you will have to flash firmware with Odin anyway.
Sent from Galaxy S Advance
Lol
Sent from my GT-I9070 using xda premium
QQL4 laggin
Hi
I am from India and have flashed russian firmware QQL4 ..
Still it is lagging a lot and hangs frequently ... I have tried
Factory reset .. no use . Is there any solution ?
fahadfazil said:
Hi
I am from India and have flashed russian firmware QQL4 ..
Still it is lagging a lot and hangs frequently ... I have tried
Factory reset .. no use . Is there any solution ?
Click to expand...
Click to collapse
Yes, Root + install some custom kernel.
Hi above solutions are worked for me.But it still seems the phone is slow for me comparing with original gingerbread.May be it is because i got bad experience at first release of jellybean russian version. It is difficult to change first impression So i downgraded to original gingerbread.Ginger bread is very stable and running on more than 50% of devices in world.so i decited to use gingerbread for 6 month untill jellybean become stable
Sent from my GT-I9070 using xda app-developers app
thabotharshan said:
Hi above solutions are worked for me.But it still seems the phone is slow for me comparing with original gingerbread.May be it is because i got bad experience at first release of jellybean russian version. It is difficult to change first impression So i downgraded to original gingerbread.Ginger bread is very stable and running on more than 50% of devices in world.so i decited to use gingerbread for 6 month untill jellybean become stable
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Oooh bad move, Heres what you should have did:
1.Installed the XXLQ4 FirmWare via Odin:
http://androidjinn.com/how-to-insta...-bean-firmware-on-i9070-galaxy-s-advance.html
2.Rooted it: (Credits-Shaaan) [Root file attached] http://forum.xda-developers.com/showthread.php?t=2087424
3.Installed a custom Kernel : ThunderZap Kernel- http://forum.xda-developers.com/showthread.php?t=2103916 (Credits-varun.chitre15)
SIRI Kernel- http://forum.xda-developers.com/showthread.php?t=2073936 (Adi_Pat)
CoCore E 5.0 Kernel- http://forum.xda-developers.com/showthread.php?t=2140597 (Credits-cocafe)
(Search for other Kernels , i didnt included it all)-(Choose only ONE)
4.Installed a custom ROM : Pure Vanilla ROM- http://forum.xda-developers.com/showthread.php?t=2182697 (Credits-ikaster17)
Chucky Bean ROM- http://forum.xda-developers.com/showthread.php?t=2120956 (Chucky)
(Search for other ROMs , i didnt included it all)-(Choose only ONE)
recommended apps: (needs root access)
1.Titanium Backup :https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&feature=search_result
2.No-frills CPU Control :https://play.google.com/store/apps/details?id=it.sineo.android.noFrillsCPU&feature=search_result
3.Terminal Emulator :https://play.google.com/store/apps/details?id=jackpal.androidterm&feature=search_result
TRUST ME, YOU WILL NOT HAVE ANY PROBLEMS WITH YOUR PHONE
But read the other members comments first if you dont trust me haha :highfive:
Just now i got new "Software Update-Firmware downloaded" ...does anyone know what is this about? Last time they removed the ripple effect with the update which made me very angry, so i'm not eager to hit the update button yet I have unbranded mini XXAMB2
It's the AMD3 version update.
I've just installed it and it's only a stability update. No new features/options as far as I can see.
bump well the phone is working with no problem at all with the AMB2, i havent had any issue with anything, but i guess the update is there for a reason
thx for the info @k.dimitrovski (fala)
Well...my has DEVICE STATUS: CUSTOM!
I installed stock recovery (running stock rooted) using stock cwm zip.
No luck. Not even with triangle away
Sent from my GT-I8190 using xda app-developers app
hi boys i have the sony xperia z c6603 from greece.
i want to make some questions...
if anyone knows...which is the release firmware for xperia z?its the 4.1.2?
i have update before 2 days to 4.2.2 but i think is slower now....and battery drain faster...
so i want to install the stock release firmware....
thanks
ex...send me please the list of stock firmwares
i want the first release firmware....
DMXSTORM said:
hi boys i have the sony xperia z c6603 from greece.
i want to make some questions...
if anyone knows...which is the release firmware for xperia z?its the 4.1.2?
i have update before 2 days to 4.2.2 but i think is slower now....and battery drain faster...
so i want to install the stock release firmware....
thanks
ex...send me please the list of stock firmwares
i want the first release firmware....
Click to expand...
Click to collapse
Why do You wanna do that? Moving back to 4.1.2 and risking Sudden Death Syndrome with initial version of firmware is not recommended at all.
You had OTA update. You don't need to dowgrade your software. Download Sony Update Service and reflash your phone with latest available 4.2.2 for Your region.
Or, if You are more advanced user, download latest FTF and flash it yourself. But, I recommend Sony Update Service.
NOTE: Backup everything before flashing. That is a must.
the reason is going slower the device and battery drain faster.
its not way to do that?
to go back to 4.1.2?
DMXSTORM said:
the reason is going slower the device and battery drain faster.
its not way to do that?
to go back to 4.1.2?
Click to expand...
Click to collapse
No, it is a reason to flash clean version of the firmware a.k.a. factory reset with newest firmware.
I have latest firmware, and battery have little better autonomy, but UI is faster, more responsive and lag-free. Try this first.
Again, do the backup before. Contacts, SMS, photos... But not system settings and any stuff like that. You will adjust it again after flashing.
We have already fixed 4.2.2 update i guess you are on ..423 frimware
If yes and you feel the phone slow. Then flash latest firmware. 244
This is Central Europe customization
Unbranded, no bloatware just few apps like officesuite mcae fee.. They can be uninstalled
http://forum.xda-developers.com/showthread.php?p=44137659
Odoslané z C6603 cez Tapatalk 2
Maybe he doesn't know how to use Flashtool.
i ask if i can go back to 4.1.2 not flash 4.2.2
i know how to use flashtool dude.
its safe to do that?
its anyone here to know this phone release stock firmware?its 4.1.2?or older?
i am on 4.2.2 firmware.
Again, You have to do factory restore. Do it with latest 4.2.2. Try it. If it's still defective as you say it is, You must RMA it.
4.1.2 is not better than 4.2.2. I don't believe that You are the only person in this forum who's phone suffers from 4.2.2 upgrade.
Do the factory clean install of newest firmware. If it is not good still, Your phone is no good.
its ok i do this....!!!!!
why you say the phone is not good?
i make factory reset now...
It may be defective in some way. Latest 4.2.2 have to work on Xperia Z like buttery smooth. Especially after factory reset.
Hi.
I updated to iHackers v4.1 from here: http://forum.xda-developers.com/showthread.php?t=2716182
Everything works fine. Root is still on my Z1. Wonderful.
But my Cam does not focussing :/
The Notes says:
In case someone runs into Camera Issues, Flash the Full Kitkat FTF first and then Install the ROM.
If i klick the Link, there are so many Files and i dont know which i should take.
Which Version? 757?
Which Provider? No Matter what, unbranded or for my Proivider: Vodafone DE
Do i lost my Root?
My Z1 is set nearly perfeclty.
Is there a solution to fix the camera problem without losing root?
My Bootloader is unlocked.
And i dont know how to know which Baseband Version i have
I see only:
Baseband-Version
8974-AAAAANAZQ-10270045-43